Jump to content
Welcome to InsanelyMac.com - No more ads! And some exciting news... Read more... ×

Leaderboard


Popular Content

Showing content with the highest reputation since 11/28/2019 in Files

  1. 6 points
    Mieze

    RealtekRTL8111-Binary

    Version 2.3.0

    52,162 downloads

    Open source driver for the Realtek RTL8111/8168 family. New Driver for Realtek RTL8111 Anybody who is looking for a add-on network card with Realtek NIC might want to consider the Delock 89357. This card is equipped with a RTL8111E-VL (chipset 16) which is known to work perfectly with my driver because this chipset is my primary test device.
  2. 4 points
    Mieze

    AtherosE2200Ethernet

    Version 2.3.3

    20,043 downloads

    Key Features of the Driver Supports Qualcomm Atheros AR816x, AR817x, Killer E220x, Killer E2400 and Killer E2500. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data. Fully optimized for Mountain Lion, Mavericks and Yosemite (64bit architecture) but should work with Lion (only 64bit) too, provided you build from source with the 10.7 SDK. Wake on LAN support. VLAN support used to be broken in older versions but is working since version 2.3.2. The driver is published under GPLv2.
  3. 4 points
    cvad

    Bootdisk Utility

    Version v2.1.2020.028b

    38,546 downloads

    Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows. Special utility from cvad & russian MAC community for new hackintosh users. Enjoy... For more information and complete instructions please see this topic. Anyone who likes the program, please support its Community Score. Feel free to "Rate File"
  4. 3 points

    Version 10.12 L

    95,337 downloads

    This download is only for users who have a laptop with a 2010 Intel® Arrandale Processor with Intel® HD Graphics: 1st Generation Intel® Core™ Processor with Intel HD Graphics (Arrandale only) Intel® Celeron® Processor with Intel® HD Graphics (Arrandale only) Intel® Pentium® Processor with Intel® HD Graphics (Arrandale only) Make sure the Device ID and Vendor ID match with the following: Device ID: 0042 or 0046 Vendor ID: 8086 In here you will find my QE/CI and CI only packages for your 1st Generation Intel HD Graphics IGPU for OS X Mountain Lion, OS X Mavericks, OS X Yosemite, OS X El Capitan, macOS Sierra, and macOS High Sierra. Choose your package: Download the Intel® HD Graphics QE/CI package if your laptop is using the LVDS connector. This package has the necessary kexts to enable Quartz Extreme with Core Image (QE/CI). This enables full hardware/graphics acceleration. or Download the Intel® HD Graphics CI package if your laptop is using the eDP connector. This package enables Core Image (CI) only. This enables partial acceleration. Note: CI only (CI) is only available on OS X Mavericks 10.9.5 and below. Future releases of macOS requires full graphics acceleration (QE/CI) for optimal performance and stability. For more information about 1st Generation Intel® HD Graphics, everything is explained in my guide: http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/
  5. 3 points

    Version 1.9.6

    142,069 downloads

    Hackintosh Vietnam Tool is a collection of many kexts and tools for Hackintosh. It will help you setup your Hackintosh faster and easier than ever. The tool is mainly for Mavericks, Yosemite, El Capitan but some can be used for Mountain Lion too. Main features: install and config Chameleon, create Clover config, install and patch kexts, system fixes and tools. All feedback are welcome, and please post your suggestion (kexts, patches). AppleHDA's contributor: anonymousnbs, vusun123, mirone, toleda, and others.
  6. 3 points

    Version 1.0.6

    4,961 downloads

    Get a seed updates for macOS 10.8-10.14 without first having to sign up for Apple programs. (Completely replaces macOS*BetaAccessUtilities.) Enjoy... Feel free to "Rate File"
  7. 2 points

    Version 2.5c1

    8,190 downloads

    This is a tool for cleaning the NVRAM and Kext Caches and rebuilding the PrelinkedKernel. Please do not post/upload or redistribute this app to other sites or forums.
  8. 2 points
    Mieze

    RealtekRTL8100-Binary

    Version 2.0.1

    19,574 downloads

    Driver for Realtek's RTL810X Fast Ethernet family of NICs which supports these chips: RTL8101E RTL8102E RTL8103E RTL8401E RTL8105E RTL8402 RTL8106E RTL8106EUS RTL8107E Features: Version 2.0.0 requires Sierra (may work on El Capitan too but this is untested). Previous versions of OS X are supported by version 1.0.0. 64 bit architecture only. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.
  9. 2 points

    Version

    9,600 downloads

    AHCIPortInjector.kext This kext inject id device for Sata chip : Install via Kext Wizard repair permissions/cache Kext by Fabio1971, updated the work of ErmaC eep357 and Micky1979
  10. 1 point
    Mieze

    IntelMausiEthernet

    Version 2.5.0

    27,820 downloads

    Driver for recent Intel onboard LAN controllers. Currently the driver supports: 5 Series 82578LM 82578LC 82578DM 82578DC 6 and 7 Series 82579LM 82579V 8 and 9 Series I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series I219LM I219V 200 and 300 Series I219LM I219V Please see the project's homepage at http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/ for a detailed project description.
  11. 1 point

    Version 10.13.x

    9,244 downloads

    Patched OSInstaller.framework to allow macOS 10.13 installation on MBR partition. To use those patched files you must follow HowTo to create an USB installer. You can't just run the app downloaded from Mac App Store. The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.13 Firmware check by crazybirdy. What is this patched OSInstaller doing? 1. Patch the MBR check, allow macOS 10.13 installation on MBR partition. 2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware". 3. This patched MBR OSInstaller method works with both MBR and GPT partition (GPT+recovery). No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch. What's the difference between createinstallmedia method, MBR-Manual-Method, and MBR-Automatic-Method? As the following.... 1. createinstallmedia method, needs stage 1, stage 2 installation process, which is worked with GUID partition only. 2. MBR-Manual-Method (same as 10.12), install via stage 2 manually, which is worked with both MBR and GUID, HFS+ and APFS. We can manually format as MBR or GPT, HFS+ or APFS on installation screen like as 10.12. We can manually select MBR HFS+ partition to install 10.13 and 10.14 on installation screen now. Needn't to update the MBR-Manual-Method files, it will still work on 10.13, and 10.14 future versions, I think so. It can be installed as Fresh installation on formated blank partition only, but can't be installed as update from previous version. 3. MBR-Automatic-Method (new for 10.13+), install via stage 2 automatically, which is worked with both MBR and GUID, HFS+ and APFS. It can be installed as Fresh installation on formated blank partition, and can be installed as update from previous version. How to make 10.13 installer for MBR (MBR-Manual-Method)? Just use EasyMBR-InstallerMaker to make installer, it works with both MBR and GPT. Read HowTo inside the dmg first, same as 10.12. Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store? Read HowTo Q/A Q7. How to update 10.13.x combo-update to MBR and GPT with installScript directly? How to make 10.13 installer for MBR (MBR-Automatic-Method)? Just use 13MBRinstallerMaker to make installer, it works with both MBR and GPT. Read HowTo inside the dmg first, new for 10.13+. Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store? Read HowTo Q/A Q7. How to update 10.13.x combo-update to MBR and GPT with installScript directly? And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
  12. 1 point
    LuckyLuck

    EFI Mounter

    Version 1.2.3

    9,388 downloads

    A small utility that mounts a EFI partition on the selected hard drive or usb flash drive This is a simple wrapper for the terminal diskutil +some buttons
  13. 1 point
    kylon

    Acer Aspire v5-571PG

    Version 4.0

    305 downloads

    ACPI and Clover config for Acer Aspire v5-571PG Tested on Catalina 10.15.1 and Clover EFI 5098 (Should work on MacOS 10.9.x - 10.15.x) Not Working: - sd card reader - Atheros AR9462 (use a compatible USB wireless adapter, see below) - Touchscreen (MacOS 10.15 only) Notes: Disable Secure Boot and enable Legacy Boot. Legacy Mode is recommended. **To reset your BIOS, power on the pc and hold the power button for about 30-40 seconds or you can short G2101 (RAM SLOT 1)** About the Atheros card: You can install ATH9KFixup (you will also need additional patches on 10.14+ to restore Atheros support) to enable this card, however, it will break sleep on MacOS 10.14+, it can freeze your OS at any time and it can freeze your network settings. Because of its instability it is highly recommended to buy a USB wireless adapter. You can find a list of working adapters, and the drivers, here. Additional things you will need: Latest Clover config (AcerAspireV5-571pg - CCE Bank) from here CloverEFI (download) or OpenCore (download - Untested) WhateverGreen (download) VoodooPS2 (download) VirtualSMC + SMCBatteryManager (download) AppleALC (download) Lilu (download) Mieze Realtek RTL8111 (download) CloverEFI drivers you will need: ApfsDriverLoader EmuVariableUefi FSInject DataHubDxe VBoxHfs (if you have hfs partitions) Remember to install BIOS drivers if you enable Legaby Boot. Feel free to ask for help. Please send me a PM if you have fixes or improvements, thanks.
  14. 1 point

    Version 10.10.5

    15,889 downloads

    Disk Utility from Yosemite 10.10.5 (ver 13 (606)) patched to run on El Capitan. Note: After you have downloaded and unzipped the file, you need to let root:wheel take ownership of the app before the app will run... sudo chown -R 0:0 ~/Downloads/Disk\ Utility.app v1 Patching procedure from Restore old Disk Utility in OS X El Capitan, credit @Justus Beyer v2 Patched with patch pattern from diskUtilityPatch, credit @dimosgmx Debug menu can be enabled with defaults write com.apple.DiskUtility DUDebugMenuEnabled 1 Advanced image verification options unlocked with defaults write com.apple.DiskUtility advanced-image-options 1 To turn off the above options, use the same commands in terminal but type 0 instead of 1.
  15. 1 point

    Version

    11,637 downloads

    Disk Utility 13 is back! Requires SIP Disabled To run it you need to Allow apps from Anywhere under System Preferences -> Security & Privacy. To enable this options execute in Terminal: sudo spctl --master-disable Yosemite Disk Utility for macOS Sierra Note: When you launch this version two icons will appear on the dock. This is normal behavior! Debug menu is available to list all partitions and mount EFI. For the nostalgic or the crazy ones ... your favorite version of Disk Utility now works on macOS Sierra. Upon launching you will need to provide password to run the scripts that make things spin. Tested on a fresh install of macOS Sierra, on an actual MacBook Pro (separate machine from the one it was modified on) Verified the following working: 1. Creating an image, restoring an image, converting an image 2. Partitioning a hard drive, erasing hard drive, restoring to hard drive 3. Verifying disk and repairing disk 4. Burning iso to DVD Please proceed with caution, I would like some feedback from people on errors or bugs that might come up. Enjoy!
  16. 1 point
    grisno

    IDT 92HD87B2/4

    Version 1.30

    1,559 downloads

    Hi people, This is a preliminary installer to activate the sound card IDT 92HD87B2/4 (111D:76D9) in MacOS. This new version of the installer does not contain AppleHDA patched Kext. To work properly, it must be installed over vanilla AppleHDA Kext. I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer. I would appreciate comments and suggestions!! Status: Speakers : OK Headphones : OK HDMI Audio : OK (Intel HD3K/4K Tested) LineIn : OK MicInt : OK MicIntNoiseReduction : OK MicExt : OK AutoDetectLineIn : OK Sleep : OK WakeUp : OK AutoSleep : OK Hibernate : OK Siri : OK Tested Laptops: - HP Pavillion G6-2209SS - HP Probook 4440S Coming Soon: - Unified installer for the different supported operating systems Original Verbs: 00a71cf0 00a71d00 00a71ef0 00a71f40 00b71c1f 00b71d10 00b71e21 00b71f04 00c71c20 00c71d10 00c71ea1 00c71f04 00d71c10 00d71d01 00d71e17 00d71f90 00f71cf0 00f71d00 00f71ef0 00f71f40 01171c30 01171d01 01171ea3 01171fd5 Modified Verbs Layer ID 3 & 12: 00A71CF0 00A71D00 00A71EF0 00A71F40 01371C40 01371D10 01371E21 01371F04 00C71C20 00C71D10 00C71E81 00C71F04 01471C10 01471D01 01471E17 01471F90 00F71C50 00F71D00 00F71EF0 00F71F40 01171C30 01171D01 01171EA0 01171F90 Modified Verbs Layer ID 2: 00B71C10 00B71D10 00B71E21 00B71F04 00C71C20 00C71D10 00C71E81 00C71F04 00D71C30 00D71D00 00D71E17 00D71F90 01171C40 01171D00 01171EA0 01171F90 AppleHDAHardwareConfigDriver.kext > Info.plist (Layer ID 2, 3 & 12): <key>HDAConfigDefault</key> <array> <dict> <key>AFGLowPowerState</key> <data> AwAAAA== </data> <key>Codec</key> <string>IDT 92HD87B2/4</string> <key>CodecID</key> <integer>287143641</integer> <key>ConfigData</key> <data> AKcc8ACnHQAApx7wAKcfQAE3HEABNx0QATce IQE3HwQAxxwgAMcdEADHHoEAxx8EAUccEAFH HQEBRx4XAUcfkAD3HFAA9x0AAPce8AD3H0AB FxwwARcdAQEXHqABFx+Q </data> <key>FuncGroup</key> <integer>1</integer> <key>LayoutID</key> <integer>2</integer> </dict> <dict> <key>AFGLowPowerState</key> <data> AwAAAA== </data> <key>Codec</key> <string>IDT 92HD87B2/4</string> <key>CodecID</key> <integer>287143641</integer> <key>ConfigData</key> <data> ALccEAC3HRAAtx4hALcfBADHHCAAxx0QAMce gQDHHwQA1xwwANcdAADXHhcA1x+QARccQAEX HQABFx6gARcfkA== </data> <key>FuncGroup</key> <integer>1</integer> <key>LayoutID</key> <integer>3</integer> </dict> <dict> <key>AFGLowPowerState</key> <data> AwAAAA== </data> <key>Codec</key> <string>IDT 92HD87B2/4</string> <key>CodecID</key> <integer>287143641</integer> <key>ConfigData</key> <data> ALccEAC3HRAAtx4hALcfBADHHCAAxx0QAMce gQDHHwQA1xwwANcdAADXHhcA1x+QARccQAEX HQABFx6gARcfkA== </data> <key>FuncGroup</key> <integer>1</integer> <key>LayoutID</key> <integer>12</integer> </dict> </array> DSDT: Patch to apply with MaciASL in your DSDT. You must change the value of the layout-id before applying the patch. In MacOS Mojave should always be 0x02 ######################################### HDEF ######################################## into method label _DSM parent_label HDEF remove_entry; into device label HDEF insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "built-in", Buffer () { 0x00 }, \n "hda-gfx", Buffer() { "onboard-1" }, \n "layout-id", Buffer () { 0x03, 0x00, 0x00, 0x00 }, \n "PinConfigurations", Buffer () {}, \n "MaximumBootBeepVolume", Buffer () { 0x4d } \n })\n }\n end;
  17. 1 point

    Version 2.1

    2,843 downloads

    This app can be used to edit or create custom versions of the voodoo tsc sync kext, i have created it because i have seen many times peoples having troubles in finding the right version of voodoo tsc sync for their cpu, so i created a mac app that lets to edit or create a voodoo tsc kext and configure it for your system, i have included 3 ways to edit the kext: 1) configure using one of the existing templates (just chose one of the cpu models listed) 2) specifying the number of logical cores (threads) 3) manually editing the info.plist of the kext using the editor (still experimental, needs some improvements) This app uses a copy of the VoodooTSCSync in his Resourches folder, or you can open an existing version of VoodooTSC and edit it, there are some other useful features to discover, and new ideas are also welcome to improve this program, i know that with a plist editor you can do what this app does, but this is designed to be more user friendly than editing a plist file manually and just for accomplish the task of configuring this kext for your machines without looking on the web for that specific pre-configured version you need, just download this program and follow a few steps. Reference topic: VoodooTSCSync Configurator, create a custom version of voodoo tsc sync
  18. 1 point

    Version 2.0.0

    728 downloads

    Hey guys. This will help simplify the post install steps when installing Sierra onto an AMD machine. This supports Ryzen, APU, FX and another other AMD CPU that has SSE4.1 Note: The USB drive must be named SierraAMD for the script to work. Once you've made the USB installer just copy the PostInstall folder to the root of the USB. Once Sierra is installed open up Terminal from the installer and run these commands, cd /Volumes/SierraAMD/PostInstall sh post.sh The script will ask for the Volume name you gave the drive when you formatted before installing. Once complete you'll be able to boot into the newly installed Sierra using the boot loader on the USB.
  19. 1 point

    Version Driver:5.0.1.25 Utility:

    8,632 downloads

    This is a new updated kext and utility directly from MediaTek for the MT7610U and MT7612U network chipset. This utility was updated and released on January 20th 2016 on MediaTek website. I have the Netgear A6210 AC1200-WiFi USB 3.0 Adapter and it works perfectly under OSX 10.11.2 with USB 3.0 and 5GHz networks being recognized. It should work for any card with one of those two chips. UPDATE 10/1/2016 I have had some serious trouble updating my system to macOS 10.12 Sierra but I have finally seemed to have gotten it working. When I have done a clean install and installing this package afterwards, It didn't seem to work. However after updating a working copy of El Capitan to Sierra with this package already installed, it seems to work. So as of this post, this same package does work under macOS 10.12 Sierra but you might have some trouble like I have until mediatek performs their own official update. UPDATE 10/26/16 I have finally figured out what is going on with this installer package. When you run this package as is, it will not install the kext on macOS sierra. It will install the wireless utility and all associated files but not the actual kext. I have included the kext as a standalone as well. Install the Kext with kext utility then run the installer pkg. Reboot and you will have a perfectly working USB wireless stick. Confirmed working macOS 10.12.1
  20. 1 point

    Version V1

    3,060 downloads

    Below listed Intel Pentium / Celeron / ATOM CPUs are supported by this kernel Add processor Model Support list Bay Trail Avoton Braswell Cherry Trail Broadwell
  21. 1 point
    Qwels

    Mac CPU Intel ID

    Version 2.2

    3,193 downloads

    All information on your Intel CPU. I please not to lay out on other resources.
  22. 1 point
    Donk

    Unlocker

    Version 2.0.8

    728,635 downloads

    Mac OS X Unlocker for VMware V2.0 Please ask questions in this thread http://www.insanelymac.com/forum/topic/303311-workstation-1112-player-712-fusion-78-and-esxi-6-mac-os-x-unlocker-2/ 1. Introduction Unlocker 2 is designed for Workstation 11, Player 7, ESXi 6 and Fusion 7. If you are using an earlier product please continue using Unlocker 1 Version 2 has been tested against: Workstation 11/12 on Windows and Linux Player 7 & Workstation Player 12 on Windows and Linux Fusion 7/8 on Mavericks and Yosemite ESXi 6.0 The patch code carries out the following modifications dependent on the product being patched: Fix vmware-vmx and derivatives to allow Mac OS X to boot Fix vmwarebase .dll or .so to allow Apple to be selected during VM creation Fix libvmkctl.so on ESXi 6 to allow use with vCenter Download a copy of the latest VMware Tools for OS X Note that not all products recognise the darwin.iso via install tools menu item. You will have to manually mount the darwin.iso for example on Workstation 11 and Player 7. The vmwarebase code does not need to be patched on OS X or ESXi so you will see a message on those systems telling you that it will not be patched. In all cases make sure VMware is not running, and any background guests have been shutdown. The code is now Python as it makes the Unlocker easier to run and maintain on ESXi. There are some challenges to write the code as ESXi has a subset of Python 2.7 which constrains some modules that can be used. 2. Prerequisites The code requires Python 2.7 to work. Most Linux distros, ESXi and OS X ship with a compatible Python interpreter and should work without requiring any additional software. Windows has a packaged version of the Python script using PyInstaller, and so does not require Python to be installed. 3. Limitations If you are using VMware Player or Workstation on Windows you may get a core dump. Latest Linux and ESXi products are OK and do not show this problem. IMPORTANT: If you create a new VM using version 11 hardware VMware will stop and create a core dump.There are two options to work around this issue: 1. Change the VM to be HW 10 - this does not affect performance. 2. Edit the VMX file and add: smc.version = "0" | 4. Windows On Windows you will need to either run cmd.exe as Administrator or using Explorer right click on the command file and select "Run as administrator". win-install.cmd - patches VMware win-uninstall.cmd - restores VMware win-update-tools.cmd - retrieves latest OS X guest tools 5. Linux On Linux you will need to be either root or use sudo to run the scripts. You may need to ensure the Linux scripts have execute permissions by running chmod +x against the 2 files. lnx-install.sh - patches VMware lnx-uninstall.sh - restores VMware lnx-update-tools.cmd - retrieves latest OS X guest tools 6. Mac OS X On Mac OS X you will need to be either root or use sudo to run the scripts. This is really only needed if you want to use client versions of Mac OS X. You may need to ensure the OS X scripts have execute permissions by running chmod +x against the 2 files. osx-install.sh - patches VMware osx-uninstall.sh - restores VMware 7. ESXi You will need to transfer the zip file to the ESXi host either using vSphere client or SCP. Once uploaded you will need to either use the ESXi support console or use SSH to run the commands. Use the unzip command to extract the files. <<< WARNING: use a datastore volume to run the scripts >>> Please note that you will need to reboot the host for the patches to become active. The patcher is embbedded in a shell script local.sh which is run at boot from /etc/rc.local.d. You may need to ensure the ESXi scripts have execute permissions by running chmod +x against the 2 files. esxi-install.sh - patches VMware esxi-uninstall.sh - restores VMware Note: 1. Any changes you have made to local.sh will be lost. If you have made changes to that file, you will need to merge them into the supplied local.sh file. 2. The unlocker runs at boot time to patch the relevant files and it now survives an upgrade or patch to ESXi as local.sh is part of the persisted local state. 8. Thanks Thanks to Zenith432 for originally building the C++ unlocker and Mac Son of Knife (MSoK) for all the testing and support. Thanks also to Sam B for finding the solution for ESXi 6 and helping me with debugging expertise. Sam also wrote the code for patching ESXi ELF files. History 12/12/14 2.0.0 First release 13/13/14 2.0.1 Removed need for Python for Windows 13/13/14 2.0.2 darwin.iso was missing from zip file 02/01/15 2.0.3 Added EFI firmware files to remove Server check Refactored Python code 07/01/15 2.0.4 Added View USB Service to Windows batch files Fixed broken GOS Table patching on Linux 18/06/15 2.0.5 ESXi 6 working Latest tools from Fusion 7.1.2 20/06/15 2.0.6 ESXi 6 patch for smcPresent vCenter compatibility 16/09/15 2.0.7 Workstation 12 on Linux fixes 14/11/15 2.0.8 Player 12 on Linux fixes Get latest VMware tools command Removed firmware files Moved to PyInstaller 3.0 © 2011-2015 Dave Parsons
  23. 1 point

    Version 1

    358 downloads

    Five different Apple theme Desktop Photographs
  24. 1 point

    Version

    738 downloads

    Hackintosh wallpaper Called Work in progress
  25. 1 point
    Shaneee

    ALC662 Yosemite

    Version

    921 downloads

    Just sharing the kexts I used for my onboard ALC662 bundled into an installer for you all. Enjoy All credit goes to whoever made these kexts. If it was you let me know.
  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up
×