Jump to content
Welcome to InsanelyMac.com - No more ads! And some exciting news... Read more... ×


Popular Content

Showing content with the highest reputation since 10/28/2020 in Files

  1. 6 points
    pico joe

    IO80211Family modif

    Version 1.0.0


    Modified IO80211Family.kext especially who use device based on Atheros40 (the idea came from CtlnaAHCIPort.kext) so we don't need to touch /S/L/E just inject via OpenCore, and we can running Big SUr without open Sealed (no need remove/delete vanilla IO80211Family.kext in /S/L/E) I'm not try in Mojave or Catalina but I'm sure is worked too 1. just put 2 kext HS80211Family.kext & AirPortAtheros40.kext .../OC/Kexts and make sure inject via config.plist do not inject IO80211NetBooter in the plist (must do research so i leave there in plugin), I remove IO80211NetBooter from plugin so as not to confuse see my pict below just add 2 value 2. you can add value manually VendorID in IONameMatch (atheros40) if your ID not present 3. refer to @MaLd0n guide in olarila for working Wifi Atheros AR9565, AR9462, AR9463, AR9485 here is the modification (no need injector) AR9565 AirPortAtheros40-9565.kext.zip AR9462 AirPortAtheros40-9462.kext.zip AR9463 AirPortAtheros40-9463.kext.zip AR9485 AirPortAtheros40-9485.kext.zip Additional : Fake Locale & Country Code Use this kext WifiLocFix.kext.zip to fix Locale & Country Code (Fake AirPort Location Interface) You can change it inside WifiLocFix.ket depend on your location and don't forget to inject in your config.plist Card Type: AirPort Extreme (0x168C, 0x3112) Firmware Version: Atheros 9380: MAC Address: XXXXXXXXXXXXXX Locale: ETSI Country Code: ID Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64 Wake On Wireless: Supported Status: Connected
  2. 2 points


    Version 2.3.3


    Key Features of the Driver Supports Qualcomm Atheros AR816x, AR817x, Killer E220x, Killer E2400 and Killer E2500. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data. Fully optimized for Mountain Lion, Mavericks and Yosemite (64bit architecture) but should work with Lion (only 64bit) too, provided you build from source with the 10.7 SDK. Wake on LAN support. VLAN support used to be broken in older versions but is working since version 2.3.2. The driver is published under GPLv2.
  3. 1 point

    Version 10.15.7


    macOS BIG SUR (11.0) UPDATE COMING SOON! (OPENCORE ONLY) This is a pack that contains all the necessary Clover files for hackintoshes that use the MSI Z390 Gaming Plus motherboard or for new users who would like to purchase and use this motherboard to run macOS Catalina. This pack contains all the necessary drivers and configuration files for the following motherboard components: Realtek ALC892 Audio Ports Intel I219-V Gigabit LAN Ethernet Port USB (USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2 Type-C & Type-A) Ports USB Internal (USB 2.0, USB 3.1 Gen1) Connectors HDMI (IGPU only) Port DVI-D (IGPU only) Port NOTE: The PS/2 port is not natively supported on macOS. If you want to enable the PS/2 port, refer to Acidanthera's VoodooPS2 kext for more information. Driver kexts must be copied to Clover's kexts folder either inside the 10.14 folder or Other folder. For this pack to work, you must have the following components: 9th Generation Intel Core Processor (i3, i5, i7, i9) Intel UHD 630 Graphics (Optional if using dedicated GPU, however it is recommended to have it) Optionally, you can use a dedicated GPU if you do not want to use Intel UHD 630 Graphics. This pack was made for this type of dedicated GPU: AMD Radeon RX Navi 5xxx GPU For the best graphics performance and experience, it is recommended to use both AMD Radeon RX Navi graphics card + Intel UHD 630 Graphics for macOS Catalina. The AMD Radeon RX Navi graphics card will be your primary display driver, however the Intel UHD 630 Graphics IGPU will enable accelerated hardware encoding/decoding (QuickSync) on macOS in headless mode. For those only using Intel UHD 630 Graphics IGPU, accelerated hardware encoding/decoding (QuickSync) is enabled by default. Inside the archive there will be two Clover folders. If you are using only the Intel UHD 630 Graphics IGPU, use the Intel UHD Graphics 630 Clover folder. If you are only using an AMD Radeon RX Navi graphics card or if you are using it with Intel UHD 630 Graphics IGPU, use the AMD Radeon Navi + Intel UHD Graphics 630 Clover folder. Installation Instructions NOTE: Do not sign onto your Apple ID. If you are signed in, sign out. For this pack to work, you must have the following operating system installed or on USB installation media: macOS Catalina 10.15.4+ You must also have Clover installed onto your main hard disk or on the USB installation media. 1) Copy the CLOVER folder from the archive. The CLOVER folder is inside one of the two choices. 2) Delete the CLOVER folder from your hard disk or USB installation media and replace it with the one you copied from the archive. That's it! Your MSI Z390 Gaming Plus motherboard should be working flawlessly on macOS Catalina! Post Installation Instructions NOTE: DO NOT SIGN ONTO YOUR APPLE ID. YOU CANNOT USE THE UUID AND SERIAL NUMBER IN THE CONFIG.PLIST FILE! AFTER INSTALLATION, YOU MUST USE CLOVER CONFIGURATOR TO GENERATE A NEW UUID AND SERIAL NUMBER FOR YOUR HACKINTOSH. OTHERWISE, YOU WILL NOT BE ABLE TO ACTIVATE IMESSAGE AND FACETIME. IF YOU ALREADY MADE A UNIQUE UUID AND SERIAL NUMBER PREVIOUSLY, IGNORE THIS SECTION. One of the difficult tasks to do after post installation is getting iMessage and FaceTime working. These Clover files in the archive identify your hackintosh as a 2019 5K Retina 27-Inch iMac (19,1). However, the serial number and UUID inside the Clover's config.plist file are samples. Using Clover Configurator, generate a unique new UUID and serial number for your MSI Z390 Gaming Plus hackintosh. In Clover Configurator, load your config.plist file. Then go to System Parameters section. Generate a new UUID using the Generate New button. Once you are happy with the UUID, copy it. Next, go to the SMBIOS section. Delete the UUID inside the SMUUID box and paste the UUID you generated earlier. In the same section, generate a new serial number using the Generate New button. Verify that the serial number is not valid by pasting the serial number at checkcoverage.apple.com. If the serial number generated is valid, go back and generate a new one until the website says it is not invalid. Next, you will use this generated serial number as the prefix for your Board Serial Number. In this case, it should be SERIALNUMBERNV9CB. The NV9CB suffix may be a different value from the one shown here. The Board Serial Number length is 17 characters. Once you are happy with your generated serial number and UUID, save your config.plist file and restart your hackintosh. Now you can sign into your Apple ID and activate iMessage and FaceTime. NOTE: ONCE YOU HAVE SUCCESSFULLY ACTIVATED IMESSAGE AND FACETIME, YOU MUST USE THE EXACT SAME UUID AND SERIAL NUMBER FOR THE LIFE OF THE MOTHERBOARD. IF YOU CHANGE THE NUMBERS, APPLE MIGHT BLACKLIST YOUR HACKINTOSH. YOU SHOULD UPDATE YOUR USB INSTALLATION MEDIA TO USE THE NEWLY GENERATED UUID AND SERIAL NUMBER. Refer to Apple's Messages App guide to learn how to use the Messages app, including setting up text message forwarding between iPhone and Hackintosh: Use Messages with your Mac Also, if you would like to change Clover bootloader resolution and language, this can be changed in the GUI section. The default is set as 1920x1080 resolution with en:us as default language. Remember, MSI motherboards do work with macOS, especially the ones that support 9th Gen Intel Processors. They just require a bit of tinkering but once someone finds out how to do it, its very easy to get it up and running! Great motherboard for budget builds! I've tried to make the most minimalist EFI folder and simplistic Clover config.plist file as much as possible. I have seen various EFI folders and config.plist files that have so much unnecessary options and kexts that it becomes hard to diagnose. If you have any questions or issues, let me know in the comments! Extra Information This pack uses Clover UEFI revision 5126. Native NVRAM supported. Native CPU power management supported. Native Sleep/Wake supported. To enable Intel QuickSync or native hardware encoding/decoding capabilites using AMD Radeon RX Navi 5xxx, you must enable both IGPU and PEG in the BIOS settings. This enables the Intel UHD Graphics 630 to run in headless mode. All USB ports work by disabling the USB port limit. However, this is only a temporary solution. It is advised to create your own USB port map with Hackintool for your motherboard to comply with Apple's 15 USB port limit on macOS. For those only using Intel UHD Graphics 630, the framebuffer is patched on-the-fly to support the HDMI and DVI-D ports of the motherboard. This was done using Hackintool and mapping the correct Bus ID to ports 5, 6, and 7 and identifying them as HDMI. Clover flag agdpmod=pikera enables AMD Radeon RX navi graphics drivers to load. Clover flag shikigva=80 enables AMD Radeon RX Navi graphics cards to enable DRM support for applications such as Apple's TV app. Clover flag igfxmetal=1 enabled the Intel UHD Graphics 630 IGPU to work in offline mode when using a dedicated GPU. VirtualSMC is used instead of FakeSMC. The DSDT included has been compiled with 0 errors. HDMI audio for dedicated graphics cards and HDMI audio for the HDMI (IGPU) port is not enabled by default since this depends on your Hackintosh configuration. iMac 19,1 is the default SMBIOS profile used for this configuration as it provides native support for Sidecar as well as Intel QuickSync (if applicable). XMP detection is enabled by default in config.plist, but requires XMP enabled in BIOS settings to enable maximum DDR4 RAM speeds claimed by your RAM manufacturer. As of Clover UEFI revision 5126, AptioMemoryFix has been removed to support the newer OpenCore quirks implementation for future macOS compatibility.
  4. 1 point

    Version 1.2.1


    ACPI support Clover 5123/5126 and Opencore 6.1/6.2/6.3/6.4
  5. 1 point

    Version 1.0.0


    Script file super easy to do, just do as it says All Chinese {censored} taken When finished downloading and package is ready CreateMediaInstall will be run!! You will have to select target drive, drop it on terminal and press return/enter Have to fix some bugs bunny back soon comment out CMI
  6. 1 point

    Version 2.0


    Please read me: Ever since macOS Mojave came out (I mean the first DP) Apple removed the support for Atheros based WiFi Adapters from the IO80211Family.kext, so to fix it we need to add the AirPortAtheros40.kext to the Extensions manually. After each clean install the AirPortAtheros40.kext needs to be installed and after clean installing Mojave DPs after few times I decides to create this app to save some time. How to use it: This application will install the missing AirPortAtheros40.kext into /System/Library/Extensions and after the installation is done and once you reboot your computer the Atheros based WiFi adapters will be enabled. The installation is the first step of the process and it is fast but the next steps which are repairing the permission on /System/Library/Extensions and rebuilding the system caches might take a while so please wait until you were asked to reboot your computer. I'm using a TP-Link WDN4800 with an Atheros chipset and it works on other similar hardware. If this app helped you please consider donating; any amount is appreciated.
  7. 1 point


    Version 2.3.0


    Open source driver for the Realtek RTL8111/8168 family. New Driver for Realtek RTL8111 Anybody who is looking for a add-on network card with Realtek NIC might want to consider the Delock 89357. This card is equipped with a RTL8111E-VL (chipset 16) which is known to work perfectly with my driver because this chipset is my primary test device.
  8. 1 point


    Version 1.0.0


    Key Features of the Driver Supports all versions of Realtek's RTL8125 2.5GBit Ethernet Controllers found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload over IPv4 and IPv6. Support for TCP/IPv4, UDP/IPv4, TCP/IPv6 and UDP/IPv6 checksum offload. Supports jumbo frames up to 9000 bytes (strongly recommended for 2.5GBit operation). Fully optimized for Mojave and above. Note that older versions of macOS might not support 2.5GB Ethernet. Supports Wake on LAN (untested). Supports VLAN (untested). Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.
  9. 1 point

    Bootdisk Utility

    Version v2.1.2020.028b


    Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows. Special utility from cvad & russian MAC community for new hackintosh users. Enjoy... For more information and complete instructions please see this topic. Anyone who likes the program, please support its Community Score. Feel free to "Rate File"
  10. 1 point


    Version v1.04


    QuickESP is a minimalistic and discreet ESP/EFI Mounter application. It's simple! Click to mount, and re-click to unmount. The Preferences pane enables you to configure the following: Enable Advanced View. Shows additional information about all discovered ESP volumes. This is helpful when you have multiple SSD/HDD installed on your system. Also you will be able to distinguish between drives with identical names. Open ESP folder on Finder. After mounting an ESP volume, its respective folder will open on Finder. This is a convenient time-saver. Autostart. Automatically launch the application on login. Make sure you have copied QuickESP.app into your /Applications folder. Credits: Dennis Koluris (a.k.a Denicio), Rick Patrick for the HDRV icon.
  11. 1 point


    Version 2.0.1


    Driver for Realtek's RTL810X Fast Ethernet family of NICs which supports these chips: RTL8101E RTL8102E RTL8103E RTL8401E RTL8105E RTL8402 RTL8106E RTL8106EUS RTL8107E Features: Version 2.0.0 requires Sierra (may work on El Capitan too but this is untested). Previous versions of OS X are supported by version 1.0.0. 64 bit architecture only. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.
  12. 1 point

    Version r3.036


    Create the USB installer for macOS 10.12 Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion or Lion, Installs Enoch or Clover, edit/create/generate the config.plist or o.c.B.p, SMBios.plist and kernel.plist. Generate credible MLB & ROM, generate SMBIOSes (96 available) and its serials. Install kexts from a large selection or install your own in /S/L/E, /L/E, /Extra/Extensions or /EFI/CLOVER/kexts or OEM sub directories (also on EFI partition). FakeSMC.kext + plugins from both Slice or kozlek (latest) versions. AppleHDA patcher or voodoohda, Nvidia Web Driver Updater (download and installs latest version!!!!). Ethernet/Wifi kexts... more and more.. Auto patcher for unsupported NVMe pci-ssd disks based on Pike R. Alpha's patches (lnfo inside Pandora) Create/update/upgrade the Recovery HD partition. Mount any ESP (EFI partition) you have in multiple disks. Embedded web broswer, Youtube videos. Embedded Clover WIKI. more? can speak... really.. in en, it, es, pt, fr and de (thx spakk for German) Is Pandora's Box secure? is compiled from source with 80,000 lines of code, no scripts, no AppleScripts and no Platypus, is a real app: About Updates: Sunday 31 July 2016 Pandora's Box is able to update itself, the click counter from the Server indicate that 68% of users usually update through Pandora it-self instead of downloading again here (a lot of downloads ): Well, for users with slow or mobile connection this is particularly important since you can save time or MBs to download it. In fact only newer bytes are downloaded instead of the entire app, usually 1-2 MB.. and your Pandora will be up-to-date. Furthermore, Pandora receive updates for Clover and Enoch when available, at the same time maintaining a stable release to rely on (the one contained by default in the app), plus some intermediate versions if already downloaded. video by JahStories video by Fljagd "All in One" solution for pre and post OS X installation. Code redone from scratch, two new apps called Ares and Webkintosh: Ares, bootloaders configurator for both Enoch and Clover. Can edit the config.plist entirely with some facilities(as well for o.c.B.p, kernel.plist and SMBios.plist). Clover WIKI is embedded in the config Editor to have quick access to the instructions and examples. Ability to update Enoch and Clover to latest revision available w/o update the entire app. Ares can install the bootloader by targeting any ESP you have directly or in congiunction with the target Volume. You can drag your config.plist directly into the Pandora's Box window, Ares will be automatically opened. What remain is to edit it and save where you like! Zeus, is now specialized in kexts installation from a large selection, but also permit you to drag your kexts (into the Pandora's interface) and let you decide where to install: in any supported filesystems, in different volumes, but is also able to install in the target volume and its ESP at same time. Support installation in /System/Library/Extensions, /Library/Extensions, /Extra/Extensions, /EFI/CLOVER/kexts/Other - 10.X (and on all OEM sub directories), ...again at same time! Hermes, now produces two kind of installers, one with "restore" method, other with "createinstallmedia". Both are untouched installers (Vanilla), and no kexts are added, nor the bootloader. WebKinTosh, a web browser to navigate hot Topics on insanelymac. Use YouTube API to show videos and users can make its own on "how to" do things using Pandora's Box. More info here
  13. 1 point

    Version 2.0.0


    Hey guys. This will help simplify the post install steps when installing Sierra onto an AMD machine. This supports Ryzen, APU, FX and another other AMD CPU that has SSE4.1 Note: The USB drive must be named SierraAMD for the script to work. Once you've made the USB installer just copy the PostInstall folder to the root of the USB. Once Sierra is installed open up Terminal from the installer and run these commands, cd /Volumes/SierraAMD/PostInstall sh post.sh The script will ask for the Volume name you gave the drive when you formatted before installing. Once complete you'll be able to boot into the newly installed Sierra using the boot loader on the USB.
  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up