Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/16/2020 in all areas

  1. Download and Auto-Compile OpenCore, Drivers and General Kexts (Debug or Release) https://github.com/Pavo-IM/ocbuilder/releases
    3 points
  2. Tested the latest Clover EFI. Works beautifully. I did have a couple of freezes (stuck on ++++++++) for a couple of reboots initially, but it all cleared up and works just as well as the revision before. Great job Running on the latest OC and everything is working, much better than Clover actually. Clover definitely has a better boot screen, but been dying to try OC and I'm loving it so far! So both work great! I do have a very minimal set up, just FYI. Thanks again AG PS: I got the memory tab back with OC (*_*)
    3 points
  3. Alternative EFI - N-D-K Fork of OpenCore 16th January 2020 - Use with Bios revision F12d Only Big Thanks to @texem for hes countless hours of hard work and help to bring a fully working version of OpenCore using SMBios 19,1 for you all to try. We have chosen to use N-D-K's Fork of OpenCore as it works happily alongside windows and has a lot of features and changes that I wish were in the original version of OpenCore, Support on this thread for these EFIs won't be great but @texem and myself will help out where we can. PLEASE NOTE - All bios settings and guide notes are the same for these EFI's and the SMBios is now set to 19,1 N-D-K OpenCore Navi Vega VII F12d EFI.zip - Vega 56/64 Navi (5700/5700XT) & Radeon VII DSDT Bios F12d N-D-K OpenCore RX Polaris F12d EFI.zip - RX Polaris Series DSDT Bios F12d PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore) Using PlistEdit Pro add your details by modifying the following PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F12d Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :  CFG Unlock (MSR) F12d BIOS Profile - The Easy Way @texem & @WizeMan Have kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam. It also has all the bios settings listed on this guide pre done and saved onto the profile. F12d_UNLOCK.zip - Use with Bios Revision F12d ONLY 1 - Download the profile and save it to a USB Key 2 - Go into the bios, 3 - Load the profile, 4 - Save and exit 5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that. 6 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 7 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. Latest Gigabyte Z390 PRO BIOS (F12d) mb_bios_z390-aorus-pro_f12d.zip  NEW Clover Major EFI and DSDT UPDATE, 15th January 2020 (Use With Bios Revision F12d Only or read below) Important Notice This New EFI Contains a brand new DSDT made for for the Z390 Pro Bios Revision F12d ONLY, If you dont want to update your bios and I personally recommend you do then replace the new DSDT with your old F11 DSDT and then you can continue using the F11 bios with the new EFIs. The EFI and DSDT has now been updated to the my latest version. Changes made include, New DSDT's For bios revision F12d ONLY OcQuirks Revision 12 Whatevergreen 1.3.6 Lilu 1.4.1 AppleALC-1.4.5 VirtualSMC 1.10 MemoryAllocation.efi now added to the UEFI driver folder to fix failure to boot because of memory allocation failures at start up Clover Updated too Revision 5103 Plus other minor tweaks to the clover config I have also now created a HD630 IGPU only version of the EFI so for all you people out there that have been asking me for this your wish is my command. Aorus Z390 Pro Vega Navi VII F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 Vega, Navi (5700, 5700xt), Radeon VII DSDT Installed) SMBios 19,1 Aorus Z390 Pro RX Polaris F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 RX5XX Polaris DSDT Installed) SMBios 19,1 HD630 Z390 Pro F12d EFI.zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 HD630 IGPU Only) SMBios 18,1  If you prefer using SMBios 1,1 then by all means switch to it but all the old problems of using 19,1 are corrected now with this EFI plus DRM is fully working unless you have a Polaris gpu. Just to add, SMBios 19,1 is the correct one to be using for our chipset and cpu, if you check the spec of a real macpro it is not a using a CoffeeLake CPU or Z3xx chipset. It does work perfectly but correct is correct so 19,1 it is. Please Note, If you use a 5700 or 5700XT then SMBios 1,1 is unstable using the Navi GPUs so please stick to 19,1 with igpu enabled.
    2 points
  4. No plugins - no MSLD. The key can be produced by VoodooBatterySMC or manually by ACPImonitor or just add constant into FakeSMC Info.plist like LID is always opened.
    2 points
  5. @drayon I have heard OpenCore is Open Source, maybe you can spend the time complaining on working instead.
    2 points
  6. GUI is okay for users that want that clover look, but unless you are going to sit and stare at your menu for an hour, I'm happy that Open core does what it's supposed to do.
    2 points
  7. Here's another pointess change for somebody.
    2 points
  8. 2 points
  9. It’s all the Bios same settings as before and if you redownload the F12d bios profile again from the main page or my main update message I posted the profile has been corrected to include all the correct settings. @stdmje By the way if you don’t want to update the bios then use the older dsdt but whatever do not use the new DSDT on the old bios revision. It had to be rewritten so just to be safe and not mess things up under the hood don’t do that buddy and update the bios or downgrade to the older F11 dsdt.
    1 point
  10. macOS updater will work just fine, the reason you get that error is because when you use the startup disk preference to manual set the startup disk, it conflicts with the auto default last booted entry that this fork is using. If for any reason you see that error, just reboot, bring the boot menu and pick an entry from there it will repair the boot device path that the startup disk preference messed up. More discussion why the startup disk preference should never be used in a hacktintosh here https://github.com/n-d-k/OpenCorePkg/issues/7.
    1 point
  11. I resolved exactly same issue by reflashing new VideoBios from https://www.techpowerup.com/vgabios/
    1 point
  12. Nope, its there. Make sure you have the latest release 3.1
    1 point
  13. No, unless you are concerned about its power usage. I believe that both Windows (StorNVMe.sys) and Linux enable APST by default on desktops, though.
    1 point
  14. https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/intel-config.plist/haswell
    1 point
  15. use this folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip generate ssdt for power management https://olarila.com/forum/viewtopic.php?f=28&t=10897 and u need dsdt full patched, all hacks need it, our bios/uefi not for osx
    1 point
  16. It fixed here CLOVERX64.efi.zip If you are using bootx64.efi then replace it with this file renamed to BOOTX64.EFI
    1 point
  17. go here for the Z390 Pro, this is an older guide and has now been updated. You can find a link to the new guide inside my thread. EFI for Z390 Pro
    1 point
  18. Done the installation went smoothly no issue x58 Hurra
    1 point
  19. From now on, releases are available at https://github.com/acidanthera/NVMeFix/releases
    1 point
  20. real problem?...hmm Did you do a git pull on OpenCorePkg itself? git pull ./ndk-macbuild.tool
    1 point
  21. Maybe you have upgraded hardware version of the mac vm. It needs version 10. If it is on version 10 copy the following in the vmx file. smc.version = "0" cpuid.0.eax = "0000:0000:0000:0000:0000:0000:0000:1011" cpuid.0.ebx = "0111:0101:0110:1110:0110:0101:0100:0111" cpuid.0.ecx = "0110:1100:0110:0101:0111:0100:0110:1110" cpuid.0.edx = "0100:1001:0110:0101:0110:1110:0110:1001" cpuid.1.eax = "0000:0000:0000:0001:0000:0110:0111:0001" cpuid.1.ebx = "0000:0010:0000:0001:0000:1000:0000:0000" cpuid.1.ecx = "1000:0010:1001:1000:0010:0010:0000:0011" cpuid.1.edx = "0000:1111:1010:1011:1111:1011:1111:1111" featureCompat.enable = "FALSE"
    1 point
  22. 1 point
×
×
  • Create New...