Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/18/2019 in all areas

  1. Rev 4846 Fixes random kernel panics in macOS 10.14 upon boot when kext injection is used and keepsyms=1 boot argument is not provided. Now this should work just as normal like in 10.13 and lower.
    4 points
  2. Yes there was, thanks for letting me know. Re-uploaded. Yes I can add those settings. Do you have any more info about them?
    2 points
  3. Version 2.0

    29,965 downloads

    Please read me: Ever since macOS Mojave came out (I mean the first DP) Apple removed the support for Atheros based WiFi Adapters from the IO80211Family.kext, so to fix it we need to add the AirPortAtheros40.kext to the Extensions manually. After each clean install the AirPortAtheros40.kext needs to be installed and after clean installing Mojave DPs after few times I decides to create this app to save some time. How to use it: This application will install the missing AirPortAtheros40.kext into /System/Library/Extensions and after the installation is done and once you reboot your computer the Atheros based WiFi adapters will be enabled. The installation is the first step of the process and it is fast but the next steps which are repairing the permission on /System/Library/Extensions and rebuilding the system caches might take a while so please wait until you were asked to reboot your computer. I'm using a TP-Link WDN4800 with an Atheros chipset and it works on other similar hardware. If this app helped you please consider donating; any amount is appreciated.
    1 point
  4. Decided on water-cooling my oldish system. I modified Antec 650 kulher but pump wasn't strong enough I've added cheap pump from amazon which is way too noisy on full speed so I've build my own Arduino PWM controller. Nice and quiet now. Specs are in my signature. 100% Vanilla - only FakeSMC kext is used. This build meant to be cheap and cheerful, mainly made from spare parts I had and some eBay bargains. It's actually very fast machine considered it cost me £250 in total. Thanks
    1 point
  5. Version 1.9.6

    145,952 downloads

    Hackintosh Vietnam Tool is a collection of many kexts and tools for Hackintosh. It will help you setup your Hackintosh faster and easier than ever. The tool is mainly for Mavericks, Yosemite, El Capitan but some can be used for Mountain Lion too. Main features: install and config Chameleon, create Clover config, install and patch kexts, system fixes and tools. All feedback are welcome, and please post your suggestion (kexts, patches). AppleHDA's contributor: anonymousnbs, vusun123, mirone, toleda, and others.
    1 point
  6. Ciao se vuoi provare , aggiornato tutte le Kext , sostituisci la cartella Clover CLOVER.zip
    1 point
  7. prova a cambiare versione di voodoops2 a domani
    1 point
  8. 1 point
  9. 1 point
  10. facciamo una prova al contrario...togliamo quello che possiamo aggiungere dopo
    1 point
  11. qualunque novità postala...sarà di aiuto per altri che vorranno intervenire no cosi come sta
    1 point
  12. 1 point
  13. naturalmente sono prove prer capire cosa non ti fa installare
    1 point
  14. 1 point
  15. no....togli solo il dsdt e prova la efi che c'è...avete lo stesso portatile,stessa cpu
    1 point
  16. il dsdt lo trovi nella efi del link che ti ho postato in in efi<clover<acpi<patched ...quello che hai postato è il config.... ti ho chiesto di togliere il dsdt perche è un file unico creato per la macchina stessa
    1 point
  17. AGPMInjector.kext is an injector kext that my app AGPMInjector generates to handle proper Graphics Power management.
    1 point
  18. guarda pure qui...prova la stessa efi che gengik fa a quel tizio...togli il dsdt però...
    1 point
  19. prova a spostare i kext in others
    1 point
  20. prova versioni precedenti di voodooPS2
    1 point
  21. se guardi per bene lo screenshot si capisce, windows è installato in mbr, niente UEFI quindi a meno che tu non voglia metter mano a complicate trasformazioni sistema da mbr a UEFI o reinstallazioni dopo corretta preparazione disco, dovrai proseguire come stai facendo ora In merito allo spegnimento, metti il flag anche ad halt enabler
    1 point
  22. lo so hai ragione, ma sono stato a chiedergli di scrivere in inglese, perche non l'ho capivo...ad ogni modo adesso continuo in italiano. Scusami.
    1 point
  23. hai una mobo molto recente, magari con bios immaturo quindi è già molto quello ottenuto... ma piano piano si arriva in fondo a tutto: apri il config con clover configurator e metti la spunta a FixShutdown che trovi nella sezione ACPI --fixes il quel PC windows era già installato era o l'hai messo dopo? se era già installato era in UEFI o era in legacy... presumo UEFI altrimenti avresti altri problemi, si prova con due cose: 1) tramite clover configurator sezione install drivers installi nei drivers64UEFI NTFS e partitionDXE nella sezione GUI verifichi che scan sia su auto yes riavvi e vedi se puoi avviare windows direttamente dalla GUI di clover in caso negativo si va e se windows era già installato in un'altro disco 2) da windows usando la versione free di questo https://www.partitionwizard.com/free-partition-manager.html monti la sua EFI da 100Mb in NTFS che è nascosta e di sistema, usando explorer++ o total commander la browsi e dovrai copiare la cartella microsoft nella EFI di macOS affiancandola a clover
    1 point
  24. Only displays attached to the Intel video device will show up in the Connectors panel. The General->Display tab will show all displays connected.
    1 point
  25. This one works for mine now, Both monitors show. Thanks @headkaze Amazing work!
    1 point
  26. le nascondi tramite config in GUI --> hide volume ed aggiungi il nome esatto di quello che vuoi nascondere disco o partizione
    1 point
  27. Hai @vandroiy2012 I make new resource for IDT 92HD73C1X5. @Trucker MK used it and Internal Speaker, Headphone and Internal Mic work properly. He used LayoutID=19 before and didn't work because different node ID at all I set layoutID = 21. Please check my pull request here https://github.com/acidanthera/AppleALC/pull/375 Here is the resources : AppleALC.kext.zip codec_dump.txt codec_dump.txt.svg Info.plist layout21.xml PinConfigs.kext.zip Platforms21.xml
    1 point
  28. The boot chime works perfectly using AudioDXE.efi and BootChimeDXE.efi in the drivers64 folder. Those (and only those) two drivers are enough to get the chime going when the macOS boot entry is selected in Clover. The only annoyance for me is that Clover takes 3 extra seconds to start. Hopefully that will be slightly optimized in the future. PS. My laptop does have UEFI but its disabled. I'm using legacy boot.
    1 point
  29. If I am to add support for AMD I would add nVidia support at the same time. If anyone has a working nVidia config please post your ioreg.txt here (run "ioreg -l >ioreg.txt" from Terminal).
    1 point
  30. @Blaggah this thread guide refers to this file repo: https://github.com/tluck/Lenovo-T460-Clover - cloning your macOS HD is a great approach. i just did that very thing for my 2 systems to get them in sync. each system has is own folder for their specific config files, ACPI, kexts - CLOVER/OEM/<board_id>/... - so everything works on the X1 but the audio? what is the audio codec? AppleALC supports so many codecs now but the config.plist file may be setting an invalid layout.
    1 point
  31. @vit9696 thank you for r4846 commit. this is very great fix. i had problem unknown panic on sandy bridge laptop until this commit. there is no more instant reboot issue thanks
    1 point
  32. OK assicurati di impostare in Bios avvio in modalità UEFI , istalla Clover di conseguenza con impostazioni UEFI ESP ... Appena hai creato il tutto posta la Clover trovi nella USB
    1 point
  33. Slightly off-topic, but for all of you wanting to renew the touch-pad of your T420, here is an offer from a German seller: https://www.ebay.de/itm/Lenovo-Thinkpad-T420-Handauflage-Palmrest-Keyboard-bezel-Original/263995876149?ssPageName=STRK%3AMEBIDX%3AIT&amp;_trksid=p2060353.m2749.l2649 I got two of those working just fine. It was time to replace the worn out "mouse" buttons anyway. Also, the Broadcom WLAN cards became really affordable too: https://www.ebay.de/itm/New-Half-Mini-Wireless-Wifi-Network-Card-for-DW1510-PW934-BCM94322HM8L-Gree-M1H6/302570350476?ssPageName=STRK%3AMEBIDX%3AIT&amp;_trksid=p2060353.m1438.l2649 Edit 1: Sigh, old hardware does fail. The Conexant 20672 sound chip of my i5-2540 T420 seems to be fried. Windows can´t find an audio device any more, headphone jack is dead. macOS can´t find an output device either, but headphone jack still works. Edit 2: Its not the Conexant sound chip which passed away. I´m a happy camper again. Seems my latest W10 update killed the sound device for what reason ever. As to why macOS is tangled by this too remains a mystery to me. Anyway, installing the latest chipset driver from Intel enables sound again. This Intel page has the package I did install: https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- (I´ll attach the chipset driver DL below too.) Edit 3: Be prepared for a missing sound device again, if you let MS do another "upgrade". Keep the chipset driver in reach as you will need it again after upgrade. It may be worth a thought to disable upgrades altogether and stop W10 from phoning home. See attached file OOSU10. MS updates may be questionable, the "repair" function does nothing about the missing device. Looking at the Sound control panel in W10 shows nothing. Conexant driver install quits, as there is no matching hardware found. Not exactly the customer experience MS is targeting to, I hope. According to HWInfo, the Windows build in question is Microsoft Windows 10 Professional (x64) Build 17134.471 (1803/RS4), just to let you know, in case you get hit by the same update feature. IntelChipset.7z OOSU10.7z
    1 point
  34. Update made... all is well again...
    1 point
  35. Version r3.036

    114,206 downloads

    Create the USB installer for macOS 10.12 Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion or Lion, Installs Enoch or Clover, edit/create/generate the config.plist or o.c.B.p, SMBios.plist and kernel.plist. Generate credible MLB & ROM, generate SMBIOSes (96 available) and its serials. Install kexts from a large selection or install your own in /S/L/E, /L/E, /Extra/Extensions or /EFI/CLOVER/kexts or OEM sub directories (also on EFI partition). FakeSMC.kext + plugins from both Slice or kozlek (latest) versions. AppleHDA patcher or voodoohda, Nvidia Web Driver Updater (download and installs latest version!!!!). Ethernet/Wifi kexts... more and more.. Auto patcher for unsupported NVMe pci-ssd disks based on Pike R. Alpha's patches (lnfo inside Pandora) Create/update/upgrade the Recovery HD partition. Mount any ESP (EFI partition) you have in multiple disks. Embedded web broswer, Youtube videos. Embedded Clover WIKI. more? can speak... really.. in en, it, es, pt, fr and de (thx spakk for German) Is Pandora's Box secure? is compiled from source with 80,000 lines of code, no scripts, no AppleScripts and no Platypus, is a real app: About Updates: Sunday 31 July 2016 Pandora's Box is able to update itself, the click counter from the Server indicate that 68% of users usually update through Pandora it-self instead of downloading again here (a lot of downloads ): Well, for users with slow or mobile connection this is particularly important since you can save time or MBs to download it. In fact only newer bytes are downloaded instead of the entire app, usually 1-2 MB.. and your Pandora will be up-to-date. Furthermore, Pandora receive updates for Clover and Enoch when available, at the same time maintaining a stable release to rely on (the one contained by default in the app), plus some intermediate versions if already downloaded. video by JahStories video by Fljagd "All in One" solution for pre and post OS X installation. Code redone from scratch, two new apps called Ares and Webkintosh: Ares, bootloaders configurator for both Enoch and Clover. Can edit the config.plist entirely with some facilities(as well for o.c.B.p, kernel.plist and SMBios.plist). Clover WIKI is embedded in the config Editor to have quick access to the instructions and examples. Ability to update Enoch and Clover to latest revision available w/o update the entire app. Ares can install the bootloader by targeting any ESP you have directly or in congiunction with the target Volume. You can drag your config.plist directly into the Pandora's Box window, Ares will be automatically opened. What remain is to edit it and save where you like! Zeus, is now specialized in kexts installation from a large selection, but also permit you to drag your kexts (into the Pandora's interface) and let you decide where to install: in any supported filesystems, in different volumes, but is also able to install in the target volume and its ESP at same time. Support installation in /System/Library/Extensions, /Library/Extensions, /Extra/Extensions, /EFI/CLOVER/kexts/Other - 10.X (and on all OEM sub directories), ...again at same time! Hermes, now produces two kind of installers, one with "restore" method, other with "createinstallmedia". Both are untouched installers (Vanilla), and no kexts are added, nor the bootloader. WebKinTosh, a web browser to navigate hot Topics on insanelymac. Use YouTube API to show videos and users can make its own on "how to" do things using Pandora's Box. More info here
    1 point
  36. Many years after that I can say that with Clover there is another way: FakeID=0x435411ab Tested in ElCapitan, works fine.
    1 point
  37. Error building 4848 with GCC /Users/stlvnub/src/edk2/Clover/rEFIt_UEFI/Platform/StartupSound.c:36:15: error: type of 'EmbeddedSound' does not match original declaration [-Werror=lto-type-mismatch] extern UINT8 *EmbeddedSound; ^ /Users/stlvnub/src/edk2/Clover/rEFIt_UEFI/Platform/sound.c:1:7: note: 'EmbeddedSound' was previously declared here UINT8 EmbeddedSound[] = { ^ lto1: all warnings being treated as errors lto-wrapper: fatal error: /Users/stlvnub/src/opt/local/cross/bin/x86_64-clover-linux-gnu-gcc returned 1 exit status compilation terminated. /Users/stlvnub/src/opt/local/cross/lib/gcc/x86_64-clover-linux-gnu/8.1.0/../../../../x86_64-clover-linux-gnu/bin/ld: error: lto-wrapper failed collect2: error: ld returned 1 exit status make: *** [/Users/stlvnub/src/edk2/Build/Clover/RELEASE_GCC53/X64/Clover/rEFIt_UEFI/refit/DEBUG/CLOVER.dll] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/stlvnub/src/edk2/Build/Clover/RELEASE_GCC53/X64/Clover/rEFIt_UEFI/refit] build.py... : error F002: Failed to build module /Users/stlvnub/src/edk2/Clover/rEFIt_UEFI/refit.inf [X64, GCC53, RELEASE] - Failed - Build end time: 16:58:25, Jan.18 2019 Build total time: 00:00:43 o_Ops, ./ebuild.sh exited with error(s), aborting..
    0 points
  38. It is taking WAY too long to make/reply to post. After clicking Submit Post/Reply it sometimes takes up to 1min for it to submit it.
    0 points
×
×
  • Create New...