Leaderboard
Popular Content
Showing content with the highest reputation on 08/15/2018 in all areas
-
4 points
-
I did some testing with latest Lilu + AppleALC which start to ignore my "layout-id" and forced me to inject "alc-layout-id" property to getting back my sound. Later I know that latest AppleALC doesnt like and treat us like real mac with overridden 'firmware-vendor' by Oz with Defaults:4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102->FirmwareVendor='Apple'. Changing / deleting those value fix my problem.3 points
-
There is a sample how to use text in Clover. Clover shows it with correct font while not QuickLook, Google and other viewers. It conforms W3C and can be used. Sample.svg3 points
-
Yes, it influences. Use this key only if embedded theme. There will be more changes in theme support so I somehow will resolve this problem too.3 points
-
2 points
-
Download the latest script from Github, i found wrong typo in line 491. I think. S instead of $ 491 [[ "${EDK2_REP}" == "https://github.com/tianocore/edk2/trunk" ]] && SUGG_REV="$(( EDK2_REV - 10084 ))" || SUGG_REV="S{EDK2_REV}"2 points
-
today i installed clean 10.14 beta7 9.4.1 10.14 beta7 build is no problem. but i can't see ApfsDriverLoader.efi in package. https://github.com/Dids/clover-builder Dids build is no problem. recently, i reported it to dids for cleanup as result, dids cleanup this https://github.com/Dids/clover-builder/commit/71b8e2c9bc75ea358cdc7d934cc208b6d3befd1c The clover has already been added to the ApfsDriverLoader package. Is there an additional ApfsDriverLoader address added to the script? sorry for my bad english2 points
-
It is correct. Have no idea where you get that "S" from. Server issue. In any case, not script-related. Build error. I get it too. The current AppleSupportPkg code doesn't seems to play well with the current suggested EDK2 base. What's your edk base (EDK2, UDK, etc.) and version?2 points
-
2 points
-
Yuu huu, updated to macOS Mojave Beta 7 (18A365a) on my pretty old Asus A43SJ laptop, finally.. uhmmb, for testing "Microsoft Office 2019 for Mac Preview" but.., this new office app still has no DarkMode appearance, or Microsoft just make it like that. Oh, I need using DP 1 to get Beta 7 update notif (bcoz, DP 1 is the only full installer I have #LoL), w/o any BetaUtility installed. Thanks.2 points
-
Which Clover revision did you try and how did you install Clover? Versions r4541 to r4639 had a bug that caused failure to install boot0 to the MBR ---> boot failure in legacy mode. Release 4644 has fixed this. If your system supports UEFI booting, did you try disabling CSM in BIOS and make sure you have an aptio fix driver eg AptioMemoryFix-64.efi in /EFI/CLOVER/drivers64UEFI? Failing this, there is a guide in Voldemort's forum on how to edit plist files inside AppleIntelSNBGraphicsFB.kext and AppleIntelFramebufferCapri.kext. Google "Enabling HD 3000 graphics on 7-series motherboards". You will need to prepare an installer USB using the old "restore BaseSystem.dmg" method, not createinstallmedia.2 points
-
It's unrelated. I scraped my own data from board resellers (dvwarehouse/PowerBook Medic/TheBookYard/etc) for board EEE codes. Regardless, MacGen is deprecated; use macserial instead.2 points
-
Version 1.9
6,594 downloads
A tool that searches Appstore for missing macOSes. Every year when a new macOS is released, the older ones get missing in Appstore. Making the Appstore's search button completely useless! For example, if you are searching for Sierra or El Capitan now, you may NEVER find it anymore using the search button. As a result, this tool was developed to resolve that issue. Here's an app that communicates with Appstore and allows you to download your desired vanilla macOS (even the older ones). GetmacOS.mov Have a great day and enjoy the tool. Credits: Talat A. Ozcan ~ Outstanding app icon designs. Cyberdevs ~ App's termination code1 point -
Version 10.14.x
41,281 downloads
Patched OSInstaller.framework to allow macOS 10.14 installation on MBR HFS+ partition. To use those patched files you must follow HowTo to create an USB installer. You can't just run the app downloaded from Mac App Store. The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.14 HFS Firmware check by crazybirdy. What is this patched OSInstaller doing? 1. Patch the MBR check, allow macOS 10.14 installation on MBR partition. 2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware". 3. Patch to stop auto-convert to APFS , "ConvertToAPFS=false" is no longer worked with 10.14. 4. This patched MBR OSInstaller will never convert to APFS, and will always install as HFS+ partition. 5. This patched MBR OSInstaller method works with both MBR HFS+ and GPT HFS+ partition (GPT+recovery). No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch. What's the difference between createinstallmedia method, MBR-Manual-Method, and MBR-Automatic-Method? As the following.... 1. createinstallmedia method, needs stage 1, stage 2 installation process, which is worked with GUID partition only, always convert to APFS format. 2. MBR-Manual-Method (same as 10.12), install via stage 2 manually, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format. We can manually format as MBR or GPT, HFS+ or APFS on installation screen like as 10.12. We can manually select MBR HFS+ partition to install 10.13 and 10.14 on installation screen now. Needn't to update the MBR-Manual-Method files, it will still work on 10.13, and 10.14 future versions, I think so. It can be installed as Fresh installation on formated blank partition only, but can't be installed as update from previous version. 3. MBR-Automatic-Method (new for 10.13+), install via stage 2 automatically, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format. It can be installed as Fresh installation on formated blank partition, and can be installed as update from previous version. How to make 10.14 installer for MBR (MBR-Manual-Method)? Just use EasyMBR-InstallerMaker to make installer, it works with both MBR and GPT. Read HowTo inside the dmg first, same as 10.12. Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave? Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store? Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly? How to make 10.14 installer for MBR (MBR-Automatic-Method)? Just use 14MBRinstallerMaker to make installer, it works with both MBR and GPT. Read HowTo inside the dmg first, same as 10.13. Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave? Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store? Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly? And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist. Q6. How to download the full installer app via swscan.apple.com, instead of App Store? A6. Some people download installer app from App Store, and get only 18 MB size, not the complete installer app (5.68 GB). You should boot to 10.12, or 10.13 to download it again from App Store, or use script Q6-DownloadFullApp/installScript_1014fullapp to download the full installer app via swscan.apple.com.1 point -
Clover boot -s to single user mode to apfs system /macOS. PS: your cp command is wrong. Need copy again. Try to rename "Image Volume" to single name. or add \ as "Image\ Volume" when you use cp. @ANONIMNIQ Try this new script, it should work on mac installer, needn't boot to apfs partition. Q5-mojave2core/mojave2core windows: copy to mac installer/mojave2core clover: boot to mac installer Run Terminal: cp /mojave2core /Volumes/1014name/usr/bin/mojave2core chmod +x /Volumes/1014name/usr/bin/mojave2core /Volumes/1014name/usr/bin/mojave2core done. 1014name is your 10.14 volume name.1 point
-
right Did's build is good. his script used UDK like you mentioned. also recently he removed 3rd party uefi driver aptiofix and apfsdriverloader for cleanup according to clover package that i reported it in his github. because clover already has it. he just added hfs+ driver. 나의 LG-F800S 의 Tapatalk에서 보냄1 point
-
I just tested (Pauli Jokela) AKA Did's build script and he uses UDK and the build includes the APFSDriverLoader-64.efi But with our script the APFSDriverLoader-64.efi is still missing.1 point
-
AppleSupportPkg uses UDK.Dids build used UDK.here is his script.https://github.com/Dids/clover-builder/commit/6b096a531e1a27f3fe6e2794fbd7400ac859c3f5 EDIT1 need to update aptiofixpkg address in script 나의 LG-F800S 의 Tapatalk에서 보냄1 point
-
Thanks you are right about the typo! I replaced the S with $ and it is working correctly1 point
-
There's a reason you're a guru! Thank you so much for yours and everyones help I've reached the installer! I'm getting a macos could not be installed notice now, so it's time to play with SMBIOS.plist I assume? With a Sandy Bridge CPU and a 7 Series Chipset, I'm thinking Macbook 8,1 would be the go to? Many Thanks again1 point
-
Everything seems to be back to normal. I was getting the same error: The current local EDK2 revision is the suggested one (S{EDK2_REV}). so I deleted the Build_Clover.command, downloaded the last version from GitHub deleted the config and the src and now it's building. The: Status: gettext-latest.tar.xz not found. % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- 0:01:14 --:--:-- error is also resolved.1 point
-
Try it here! I think PMHeart also uses and talks about Ivy Bridge... https://www.insanelymac.com/forum/topic/334898-pre-release-macos-mojave/?page=2&tab=comments#comment-26166601 point
-
1 point
-
Currently, get no issue here.. with latest Build_Clover script (EDK2) or UDK2018. >> OS X 10.11.6 (15G22010), Xcode 8.2.1 Build_Clover_EDK2.zip Build_Clover_UDK2018.zip1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
yes windows: copy to mac installer usb/mojave2core clover: boot to mac installer usb Run Terminal: cp /mojave2core /Volumes/1014name/usr/bin/mojave2core chmod +x /Volumes/1014name/usr/bin/mojave2core /Volumes/1014name/usr/bin/mojave2core done. 1014name is your 10.14 volume name.1 point
-
Thank you! Is it possible to copy new patch script on usb drive and run from it, because my drive is apfs and I don't have write access from Windows.1 point
-
I didn't see any visible changes at all in MS Office 2019 from the latest update of MS Office 2016.1 point
-
tá ruim demais isso aí, só vc olhar pelo log, é muito erro, tem muita coisa pra acertar aí essa pasta clover já vai pra um hack bem legal, se preciso for a gente faz mais uns acertos o problema é que eu coloquei as kexts na pasta clover/kexts/other e pelo jeito vc está usando na library/extensions ou na system/library/extensions1 point
-
1 point
-
1 point
-
1 point
-
It is interesting but Your request produced an error. [newNullResponse] Clovy made a template to create Vector Theme. The idea is the one file will contain layout, all icons and a preview of the theme It made by Adobe Illustrator. CloverThemeTemplateAI.svg1 point
-
My suggestion is use the single phase install-method as 10.12 via @dosdude1's macOS Mojave patcher or common single-phase MBR-Manual-Method. It will work for you.1 point
-
1 point
-
(OK, have a good mood finally..) I've done rebuilding Clover logo from scratch, yey..!!! It has about 20 paths, and produces @8KB only (SVG1.1) Oh, ignore the screenshot.. attached *.ai file is in "Green" (Export it / save as *.svg your self with Inkscape / Illustrator, etc.) Clover_Logo_Green_ai.zip #EDIT: This one is bit different from @JrCs has (just take a look).1 point
-
1 point