Leaderboard
Popular Content
Showing content with the highest reputation on 07/14/2018 in all areas
-
4 points
-
Just wanted to mention video recorder works perfectly fine for me here... No issues whatsoever. Since I did that trick with setting the iGPU as primary and booting off of the eGPU, I got no issues anymore. Preview and Quick Look work properly, and the full screen video recorder works, as well.2 points
-
2 points
-
2 points
-
Did you install it using Kext Utility.app or which method used? Try running this after kexts are installed:2 points
-
2 points
-
Rev 4599 Vector fonts support. Tested all procedures to use fonts. Now we have to write GUI with svg images and fonts. This font named "DragonIsComing" free for personal use. There was a mistake in original font with zero width of letter "o". I corrected manually in svg file. And I don't know why "o" have no hole. Is it designed or still clover mistake. EDITED: Holes corrected in 4607.2 points
-
Version 10.14.x
41,279 downloads
Patched OSInstaller.framework to allow macOS 10.14 installation on MBR HFS+ partition. To use those patched files you must follow HowTo to create an USB installer. You can't just run the app downloaded from Mac App Store. The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.14 HFS Firmware check by crazybirdy. What is this patched OSInstaller doing? 1. Patch the MBR check, allow macOS 10.14 installation on MBR partition. 2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware". 3. Patch to stop auto-convert to APFS , "ConvertToAPFS=false" is no longer worked with 10.14. 4. This patched MBR OSInstaller will never convert to APFS, and will always install as HFS+ partition. 5. This patched MBR OSInstaller method works with both MBR HFS+ and GPT HFS+ partition (GPT+recovery). No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch. What's the difference between createinstallmedia method, MBR-Manual-Method, and MBR-Automatic-Method? As the following.... 1. createinstallmedia method, needs stage 1, stage 2 installation process, which is worked with GUID partition only, always convert to APFS format. 2. MBR-Manual-Method (same as 10.12), install via stage 2 manually, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format. We can manually format as MBR or GPT, HFS+ or APFS on installation screen like as 10.12. We can manually select MBR HFS+ partition to install 10.13 and 10.14 on installation screen now. Needn't to update the MBR-Manual-Method files, it will still work on 10.13, and 10.14 future versions, I think so. It can be installed as Fresh installation on formated blank partition only, but can't be installed as update from previous version. 3. MBR-Automatic-Method (new for 10.13+), install via stage 2 automatically, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format. It can be installed as Fresh installation on formated blank partition, and can be installed as update from previous version. How to make 10.14 installer for MBR (MBR-Manual-Method)? Just use EasyMBR-InstallerMaker to make installer, it works with both MBR and GPT. Read HowTo inside the dmg first, same as 10.12. Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave? Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store? Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly? How to make 10.14 installer for MBR (MBR-Automatic-Method)? Just use 14MBRinstallerMaker to make installer, it works with both MBR and GPT. Read HowTo inside the dmg first, same as 10.13. Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave? Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store? Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly? And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist. Q6. How to download the full installer app via swscan.apple.com, instead of App Store? A6. Some people download installer app from App Store, and get only 18 MB size, not the complete installer app (5.68 GB). You should boot to 10.12, or 10.13 to download it again from App Store, or use script Q6-DownloadFullApp/installScript_1014fullapp to download the full installer app via swscan.apple.com.1 point -
Holy {censored}, what a spam here, I was hoping to find out what's new but it's hard to find something useful. Maybe it's better to split the topic and open another for installation, graphics ........ issues.1 point
-
se ricarichi la pagina ti viene fuori, non riuscivo a caricarlo ora sono riuscito è l file ipn macbook pro1 point
-
No problem man Try this folder (whit your fingers crossed ) and let me know. EFI 2.zip1 point
-
1 point
-
1 point
-
1 point
-
Hardware Encoding Should be active if you disable it, it makes things worse so iGPU must be enabled for hardware encoding to work properly, but according to your last post regarding the issues with google maps I think there must be something wrong with the EFI folder or the config.plist that you are using. Are you using a Patched DSDT?1 point
-
You can remove it and test without it, I don't inject anything related to my iGPU (and even if I do) it works without IntelGraphicsFixUp.kext anyway. Please use a USB disk for these tests just in case copy the EFI folder on the EFI partition and remove the intelgraphicsfixup kext with any intel related injections and boot from the USB disk and see if that helps with the issue. ( I hope it does )1 point
-
questo è quello con il config nvidia yes non mi faceva caricare tutto in un messagio @gengik84 IPN’s MacBook Pro NVIDIA YES.zip1 point
-
Thanks! I'll get to that as soon as I can, and let everyone know the results.1 point
-
Open terminal and type this: log show --style syslog | fgrep "Wake reason"1 point
-
@gengik84 ti ringrazio per la tua disponibilità ok aspetto cosa dice @iCanaro1 point
-
il necessario per far avviare l'installer e l'installazione di mac al primo avvio, anche se sarebbe bello poter creare tool che crea una configurazione adatta all uso di mac nel post installazione, ma quello che mi interessa è che almeno la parte dell'installer vada1 point
-
You can try another kext, use NDRVShim.kext instead of replacing IONDRVSupport and IOGraphicsFamily post#1875. Previous post updated here. It's better to use Kext Utility.app to install kexts.1 point
-
la trovo un'ottima idea...se me lo permetti vorrei girare questo tuo post nel sito che frequento dove c'è un po piu di dinamismo rispetto a questo ti ringrazio del titolo di big ma non sono bravo per niente...però mi piace l'argomento quindi non ci sono limiti per apprendere1 point
-
Apple Updates MacBook Pro with 8th Gen Intel Core Processors (So much for moving away from Intel ) https://www.techpowerup.com/245947/apple-updates-macbook-pro-with-8th-gen-intel-core-processors Hopefully the next update will be the MacMini line up.1 point
-
1 point
-
1 point
-
This method is work, only if your nVidia card was worked fine on 10.13.6 with those native kexts. Otherwise, I don't think it will work for your nVidia card. I don't have the same card as yours, I can't tell you how to make it work. -- If you have graphics acceleration once, you may remove all the kexts, rebuild prelinkedkernel and reboot, then, patch the kext, install the kext again.1 point
-
1 point
-
1 point
-
1 point
-
@fantomas1 Thank you I will try HSierra with pathed AMD kernel. I test rollback 10.11.4 com.apple.telemetry.plugin to 10.14 thats not work.1 point
-
Is there a list on how clover match a given boot with the icons? I see there are a bunch of icons on each theme, not sure how they are detected nor how to modify them. Great work on Nightwish256! I'm using it on a 1440p screen and it looks great. I can also help identifying issues with themes on 1440p if needed.1 point
-
As far as I know 0x67 disables SIP but it won't allow for untrusted kexts to be loaded, if you run "csrutil status" in terminal you can see which part of SIP is disabled, I guess with 0x3e7 SIP will be totally disabled and it will expose macOS even more. Addition: Take a look at this for more info1 point
-
Thanks @crazybirdy. He's just posted a newer/simpler patched GeForceTesla.kext that also seems to work well (attached to post#2529 in macrumors thread )1 point
-
1 point
-
1 point
-
1 point
-
In this case, use APFS.efi or APFSDriverLoader.efi in the drivers64UEFI folder of the installed macOS drive. Do not use them both, only one of them should be present in that folder! APFS.efi APFSDriverLoader.efi1 point
-
1 point
-
1 point
-
Take a look at this guide under the BIOS Settings1 point
-
I modified the Dynamic Wallpaper so it could cycle throughout the day, no matter what mode are you (dark or light). Drive. Just put it in you Pictures Folder and select it as your wallpaper.1 point
-
Well, I have these *.svg if anyone need them. Not all are in pixel perfect (some are generated with Illustrator tracing, from bitmap), but these are real editable vector (not embedded bitmap) as we could see xml values using text editor. SVG-Icons-for-Clover-Theme.zip #EDIT: ..and some of them are just my concept (os_grub, os_legacy, etc).1 point
-
I had same thing with Ozmosis on my board, but i waited few minutes even with same errors above and the install screen appeared. Kext injection doesn't work on Mojave yet.1 point
-
Ok i had some problems because of the testing phase, but here it is, tinu updated to create macOS Mojave installers: Download the app: https://github.com/ITzTravelInTime/TINU/releases source code: https://github.com/ITzTravelInTime/TINU/ Note that if you use it on macOS Mojave beta and you try to create a macOS Mojave beta bootable installer it will ask you to install the xcode command line tools, and note that this is not caused by TINU, this is done by the "createinstallmedia", which is the executable that both TINU and the terminal method uses to create the bootable usb thumb drive @xtddd try this new version1 point
-
Hi anyone using FileVault, I wrote an efi module to solve all the keyboard problems. Anyone up to test that ? If yes, put this module in your clover drivers folder, remove any ps2 and keyboard efi driver and that's it. If you are using legacy boot (DUET) and a USB keyboard, that won't do, except if you generate the DUET part with the original UsbKbDxe.efi Let me know ! Thanks. AppleKeyFeeder.efi1 point
-
In this video I first show the boot time of my system running on an OCZ Vertex 3 SSD APFS formatted and with TRIM enabled. As you can see the boot has a long pause at these "FIPSPOST_USER" stuff. The solution that always worked for me is to create a time machine backup and restore to disk. As you can see after the restoring that long pause is drastically reduced. The initial boot time is 45 seconds circa, after restoring is down to 22 seconds. TRIM is still enabled and disk is APFS.1 point
-
Rev 4466 Now Devices->Properties can be written into config.plist in format as DarwinDumper do For example More detailed instructions followed. This way we can deprecate Arbitrary section.1 point