Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 06/11/2018 in all areas

  1. You can clean install Mojave beta on an HFS partition with a patched OSInstall.mpkg (this starts core.pkg installation) ---> bypasses compatibility checks. See post#258 in macrumors unsupported macs thread, credit to @foxlet. After the package installer completes, copy boot.efi (from "Misc Files.zip" attachment or extract yourself from BaseSystem.dmg with Pacifist) to /S/L/CoreServices of the Mojave volume, and copy SeedEnrollment.plist file into the /Users/Shared folder with the "." prefix so it becomes a hidden system file eg if SeedEnrollment.plist is in your ~/Downloads folder, use the terminal command cp ~/Downloads/SeedEnrollment.plist /Volumes/Mojave/Users/Shared/.SeedEnrollment.plist Good Luck Misc Files.zip
    7 points
  2. Lately, it seems that specifying the repositories as svn+ssh:// instead of svn:// results in more reliable and perhaps slightly faster performance (at least for me). This would change the transfer protocol to ssh (svn is used only locally), which seems to perform better than svn as the transfer protocol (don't expect it to be much faster, but at least it doesn't seem to time out and disconnect duing the transfer). The changes would look like this in buildclover script: For Clover: "svn+ssh://svn.code.sf.net/p/cloverefiboot/code" For EDK2: "svn+ssh://svn.code.sf.net/p/edk2/code/trunk/edk2" EDIT: As Philip Petev mentioned, this does not work for general user access, and requires an svn user/password. And by the way, there is no problem building with 10.14 / Xcode10.
    3 points
  3. 2 points
  4. For me is working too, update went well I updated in 10 minutes... I have sound and ethernet... all works.
    2 points
  5. I can't, no verbose hangs, it boot system to gray screen and mouse cursor, then reboot itself. I think,maybe some kexts or frameworks cause the reboot issue. I may try to remove some kexts to test it when i have free time.
    2 points
  6. Now it works in almost many Unsupported Macs and Hackintoshs including Core2Duo as shown, it only needs some patience and searching for a solution, because solutions exists already, it only depend on what you know and what you don't know yet
    2 points
  7. I've just installed Cuda 396.64 under macOS 10.14 Beta and it's kext loaded. The only problem here is, "No Compatible CUDA Graphics found" when I tried running CUDA-z.app, so... uhmb, forget it #atm.
    2 points
  8. This is the file i was using in High Sierra. DisplayVendorID-dae.zip
    2 points
  9. 1 -Create a USB bootable Use this tool and download Catalina or Big Sur from Apple servers installScript_1016fullapp.zip Credits: crazybirdy Copy Catalina / Big Sur installer to Applications folder, open terminal and run Catalina Big Sur Monterey If you want check one step by step, check here -Opencore Vanilla Tutorial https://tinyurl.com/y2dmt5af -Clover Vanilla Tutorial https://tinyurl.com/rcy7muu4 2- EFI folder USB installation -EFI OpenCore or Clover Folder Intel Processors Paste this EFI folder in EFI partition in your USB STICK https://tinyurl.com/ybr968w3 3- EFI folder SSD -EFI OpenCore or Clover Folder Intel Processors Paste this EFI folder in EFI partition SSD https://tinyurl.com/ybr968w3 4- Start Fine Tune Run this app and post full dump here for full ACPI solution RunMe.app https://tinyurl.com/y9562hz7 If you like a SSDT way, here we go (SSDT is a incomplete way) SSDT-OLARILA.aml.zip 5- USB Solution https://tinyurl.com/bkmcj4ua --DSDT PATCHES-- -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU --SCREENSHOTS-- -If you want to buy me a beer - Donations with PayPalhttps://tinyurl.com/r2bvzm7 Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM, Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display. -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community, SchmockLord, daliansky and many, many, many others! We're all here to have fun and learn from each other!
    1 point
  10. Including the guide in the Dell optiplex 790.zip. • Dell Optiplex 790 – This is necessary to install macOS Sierra for this tutorial • A copy of Mac OS X – This can be in the form of an existing hackintosh, within Windows or Linux, or even a regular Mac. • A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). • A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, which is available for free from the Mac App Store. This is for an clean vanilla install. My Specs Dell Optiplex 790 SFF • Intel Core i7-2600 / 3.39 GHz (you might have a different CPU) • 8GB DDR3 1333Mhz RAM • Samsung SSD 840 EVO 120 gb • Nvidia Geforce Quadro 600 1024 gb Netgear wna1000 N150 mini usb wifi adapter (https://www.amazon.com/NETGEAR-Wi-Fi-Micro-Adapter-WNA1000M/dp/B004VDR37K) Download OS X Sierra Download macOS Sierra from the Mac App Store. Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘) +Q. The application INSTALL macOS Sierra will appear in /Applications Done! 2. Prepare bootable USB Installer Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8G. Now, we need to prepare the USB Drive so that it will properly boot up on your desktop. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will delete everything on the drive. • Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents. • Open Contents - Resources. • Open a Terminal in applications or using the spotlight. In the Terminal window type sudo followed by a space. Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window. Type --volume followed by a space. Connect your USB drive and drag the USB drive into the Terminal Window.• Type -- applicationpath in the Terminal followed by a space. Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window. Press Return on the keyboard to submit the full command. Type a 'Y' to continue when prompted to do so, and press Return on your keyboard The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience. 3. Installing Clover to the USB Disk • Download clover boot loader - https://sourceforge.net/projects/cloverefiboot/ • open the Clover.pkg. • Clover installation screen will be prompt. • Click on Continue - Continue. • Click on Change Install Location on the right bottom. • Choose your USB Stick named Install macOS Sierra and click on Continue. • Click on Customise on the left bottom. • Choose Install Clover in the ESP • Choose Boot-loader - Install boot0af in MBR • At last choose Install RC Scripts on target volume • Click after that on Install. • Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 4. Prepare USB stick for Dell Optiplex 790 Now, we need to prepare the USB Drive so that it will properly boot up on your desktop. • Go to the folder Dell Optiplex 790 (SFF) • Copy the kexts inside the folder Kext • Copy and paste all the files to /EFI/CLOVER/Kexts/10.12 • Copy the config inside the folder Config Paste the config inside /EFI/CLOVER and replace Save the Clover.pkg on the usb for further installation. Done, you can now boot on the usb. 6. Installing OSX Sierra from your USB drive Power on the desktop, press F12 until you get to the boot screen. Enter Bios Setup and under “Boot sequence” choose legacy boot If needed, check the square for booting with usb. Apply and exit Once again, press F12 until you get to the boot screen - Choose to boot from usb. When clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer”. Choose you desired language and click on the arrow, the macOS Utilities screen will appear. For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing. Choose in the macOS utilities for Disk Utility and click Continue. Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column. Click the Erase button on top. Under Name: Type Sierra or any other name. (your chose but remember the name) Under Format: Choose Mac OS Extended (Journaled). Under Scheme: Choose GUID Partition Map. Click Erase. Click on Done. Close Disk Utility you will be prompted to the macOS Utilities screen. In the macOS Utilities screen choose Install macOS and click 2x on Continue. Agree the license agreement and click again on Agree When the installer asks you where to install macOS, choose your Sierra HDD and click on Install. Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD. Upon completion, system will restart when its done. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra”. macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your desktop will reboot. 7. Booting for the first time macOS Sierra • When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra" • You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra. • At the country selection choose your country and press continue. • Select Your Keyboard choose ABC and press Continue. • Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet” or use an ethernet cable • Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue. • At Enable Location Services for "Enable Location Services on this Mac" click Continue. • Agree the Terms and Conditions. • Create your Computer Account and uncheck "Set time zone based on current location" press Continue. • Choose your Timezone and click Continue. • At the Diagnostic screen click Continue. • The setup process is ready, Done!. 8. Change Security & Privacy for 3rd party software • Start Terminal choose using the launchpad or spotlight • In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere. • Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option. 10. Installing Clover to the HD • Unpack the Dell Optiplex 790 (SFF).zip to your desktop. • Once again install clover with the pkg you saved on the usb • Click on Continue - Continue. • Click on Change Install Location on the right bottom. Choose your HDD named Sierra click on Continue. • Click on Customise on the left bottom. Choose Install Clover in the ESP Choose Boot-loader : Install boot0af in MBR At last choose Install RC Scripts on target volume Click after that on Install When its done, locate the folder Dell Optiplex 790 (SFF) Download Clover configurator (http://mackie100projects.altervista.org/download-clover-configurator/) Drag it to the folder Applications in finder menu. Open the app and mount the EFI portion if its not mounted • Copy the kexts inside the folder kext • Copy and paste all the files to /EFI/CLOVER/Kexts/10.12 • Copy the config.plist inside the folder Config (optional, just open Clover configurator and create a new one) Paste the config inside /EFI/CLOVER and replace Done, you can now boot from the hdd. 11. Optional - USB WIFI If you have, Like me the netgear wna1000 N150 follow this steps then. Go to folder Dell Optiplex 790 (SFF) Open the folder named Wifi Open the folder named netgear wna1000 N150 Open the Sierrav1.dmg Install the “installer.pkg” Restart and done, you have now working wifi. 12. Optional - Clover config If you choose to make a new config file. (remember, if you have another graphics card this settings might look different. You might need boot flags or other settings to get it to work. THIS IS ONLY WORKS WITH GEFORCE QUADRO 600 as far as I know) Should work for everyone with a graphics card thats supported oot in MacOS. Open Clover configurator Go to Boot and check the square named kext-dev-mode=1 Go to SMBIOS and press the button looking like that ——> Choose MacBook Pro 10,1 Go to System Parameters Press Get it from system and copy that Go to SMBIOS again and paste it in SmUUID Go to Rt Variables Press Generate Close Clover configurator and save the config.plist Paste the config.plist in /EFI/CLOVER (you can paste it on the usb too if you want) Done! You can now boot without the usb AND iMessage/FaceTime/iCloud/Appstore should work now. 13. Optional - skip the clover boot menu to boot straight into Sierra upon starting your desktop Open the config.plist you’ve made with Clover configurator Go to Boot In the section Default Boot Volume type Sierra (or the name you chose for your hard drive with Sierra on) In the white square named Timeout type 0 Done! Your desktop will now skip the clover boot menu and boot straight into MacOS Sierra. 14. Optional - Bluetooth Adapter https://www.amazon.co.uk/gp/product/B007MKMJGO?tag=pcad03-21 If you have like me the (or want to buy one) Ultra-Mini USB Broadcom BCM20702 you can follow this steps. Go to folder Dell Optiplex 790 (SFF) Copy the kexts in the folder Bluetooth Paste the kexts in /EFI/CLOVER/Kexts/10.12’ Done! You should now restart your desktop. 15. Disable SIP - Optional Open your config.plist within /EFI/CLOVER/ Go to Rt Variables Change the BooterConfig to 0x28 Change the CsrActiveConfig to 0x67 Restart your hackintosh Boot into recovery mode when reaching Clover boot menu. Open up terminal Type in csrutil disable Restart your hackintosh and boot into Sierra Open up terminal Type csrutil status and check if its disabled. Done, you have now disabled SIP. 16. Whats working? About everything should work by now including iMessage/FaceTime/iCloud/Appstore. 17. Finished! You’ve successfully installed macOS Sierra onto your Dell Optiplex 790 SFF.
    1 point
  11. I might have that solved... my Previous rom had a working APFS jumpstart FFS, I believe all it did was jumpstart the normal APFS.efi on the drive, so it may still work with current APFS. when I get home later tonight I will post and see if it will work its magic still. HBP
    1 point
  12. Yes. Also Geekbench went from 149000 to 182000 for me. My 7900x went from 6100/43500 to 6300/48000 in CPU Geekbench In reality though I'm getting some artifacts in windows and my main software isn't accelerated now. Eagerly anticipating a more refined beta and/or a fixed software
    1 point
  13. 13.06 beta 2 running ok here on the laptop. The X-99 at this point is with Mojave, but without speedsteps (XCPM). Everything else works great! Edit: I noticed an increase in speed in both the Laptop (13.6 beta 2), as in X-99 (10.14)
    1 point
  14. sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/your_volume "--applicationpath" é depreciado.
    1 point
  15. Yes, you are right. And in that case I was wrong, it is not suitable for general user access.
    1 point
  16. Here you go... patched ROG-RAMPAGE-VI-APEX firmware attached below (it also already includes the iMac Pro Splash Screen Image). Note that I could not test the file, thus if you flash your BIOS with R6A.CAP using EZ FlashBack, you do it at your own risk! R6A.CAP.zip If you don't patch the BIOS you need to adopt and use TSCAdjustRest.kext! If you do not manually disable the MSR lock in the BIOS settings of the unpatched BIOS firmware, you need to enable xcpm_core_scope_msrs © Pike R. Alpha Kernel patch in addition! # If you use the patch BIOS firmware, you neither need TSCAdjustRest.kext nor the xcpm_core_scope_msrs © Pike R. Alpha Kernel patch. In the latter case you also should enable the MSR Lock in the BIOS Settings, as the corresponding MSR registers have been already unlocked for Kernel Write during the firmware patching process. Good luck, KGP
    1 point
  17. that is not my kext i just compiled it for sierra or hs i forgot its been a while.... it is dr.hurts code. the finger pressure issue should be able to be adjusted in the trackpad info plist file. you have to edit the "finger-z" value to your liking.
    1 point
  18. It's a bug in the build process. ebuild.sh calculates NASM_PREFIX using logic BootHFS/Makefile just uses "nasm" and takes whatever is in the path OTOH ebuild.sh also does pathmunge "$TOOLCHAIN_DIR/bin" So if the nasm in the path is not the same as the one NASM_PREFIX you can end up using wrong nasm to build boot sectors and get this error.
    1 point
  19. Only Sierra 10.12+ support APFS to view it. El Capitan didn't support APFS, can't see it, unless you install Mojave as HFS+J with MBR patch method (will not convert HFS+j to APFS).
    1 point
  20. With the AppleALC I attached on my previous post, it works without any changes except the boot arguments.
    1 point
  21. There is new instructions, proved yesterday with Xcode9.4
    1 point
  22. It's only one user Ecefer post it work without anything, no more evidence, that's why I'm not sure it's really work or not.
    1 point
  23. This question should be in in a topic of its on, under the graphics section.
    1 point
  24. I do not have a LGA775 socket components to test it, but you have to review your config.plist and check your DSDT or graphics card, it might be a trick for that! If people not only one user, but users confirmed that it work, then you just have to check or ask for a config.plist that already working!
    1 point
  25. Broadcom cards give continuity support, i can receive calls on my laptop hack with Atheros, but missing airplay, airdrop and other things.
    1 point
  26. Forum Macrumors has confirmed that Core2Due working on Mojave as its shown in the screenshot: Just search on the net, you'll find the fix
    1 point
  27. Well, that's the problem... SVN cuts my connection when I try to download larger amount of data (in order to create the build environment). That's what I was using so far, but at least recently, SF is really, really {censored} for downloading larger amounts of data (you can see my post above, for more info). And apparently I'm not the only one. And that script apparently doesn't work with anything other than SVN. I would have used tianocore/edk2 source from Github...but I don't know which commit should be the equivalent of r27233 from svn. And...the latest Clover changes are still on SVN for as far as I know.... So, even if I use some other clone of that source, from github, since it's not the official one, I still don't have access to the latest changes. Which defies the purpose of trying to build Clover in the first place. I really don't know what to do. I tried to download the sources manually and then run that script...but that didn't work. It still tries to connect to SVN...which again is down. So...that's why I was asking for an updated build method, using sources already downloaded (assuming I can download them without SF cutting my connection over and over again). Even the main page of sourceforge is down. I don't know how do they expect anyone to get any work down with this kind of server issues.
    1 point
  28. https://github.com/Dids/clover-builder/releases
    1 point
  29. Why not? I need have theme embbeded doble size, my screen is 4k and see small... I love theme embbeded
    1 point
  30. just deleted the whole "SRC" folder and started from the beginning. Now all is perfect again and machine boots from rev. 4530 now.
    1 point
  31. It's actually the same for me with Adobe Lightroom. It's not endless spinning wheel. But it is very, very slow. Doing anything, moving any slider is laggy. And it is kind of annoying to use. It makes actually getting some work done pretty hard and frustrating. But hey, I didn't expect it to run smoothly from the very beginning.:)) And especially on a BETA. :))) So, yeah, I'm pretty happy that it actually runs. And, as I said before, and as the actual OS warns about (at least in my case), some apps are not yet optimised. This will most likely be fixed in the future. Glad I could help! Took a while to download and install that software (at least on my rig). :))) I'm glad it wasn't for nothing.
    1 point
  32. In the DSDT or the SSDT you use, replace: "layout-id", with "alc-layout-id", Add -alcbeta -lilubetaall into the boot-args and use AppleALC_1.2.8v2.zip this was picked from @arsradu post in AppleALC topic This is if you already use AppleALC kext solution, if you use another solution ignore this comment
    1 point
  33. Finally got trackpad fully working! Turns out I needed to use release 5 instead of 6. While I may not have good palm prevention, nor a working preference pane now, I have my gestures, and I don't have to put all my body wait on my touchpad for it to register.
    1 point
  34. its probably ''IOAccelerator's aktivieren für GPU Überwachung anzeigen'' I think ''IOAccelerator's'' is more like a code name which is not necessary to be translated, something like ''Apple macOS'' is the same name for all languages. im not native German but I do speak the language a little bit.
    1 point
  35. I still have just one issue with my laptop and that is the display override. Previously I could put my venerated display data in System/Library/Displays/Contents/Resources/Overrides and reboot and I would be able to select a higher resolution. Laptop screen is 1366 x 768 but with the override I could use 1920 x 1080. From what I can see the folder structure is the same, the actual file itself was changed slightly and I made changes to my file to be inline with the changes but it still didn't help. This used to work in Sierra and High Sierra. I'm hoping someone else may have the same issue or at least be able to provide some help. Sent from my SM-G930F using Tapatalk
    1 point
  36. This is simply not true, they have removed a ton of previously supported devices and also changed how things normally worked with its actual supported devices. Just because it worked in previous macOS versions does not mean it will work with Mojave.
    1 point
  37. Here you go : Battery & Trackpad.zip to put on EFI\CLOVER\Kexts\Other\
    1 point
  38. The reason of requesting this info is that my ROM Chip has only 64Mb, AppleALC can be resized to about 19Kb, but the last release of Lilu have 1.3Mb and its size can't be reduced. So i can't upgrade AppleALC to the latest into the ROM because of the latest lily size, i've to stay with AppleALC 1.2.4 if i need it to be on the ROM. Ozmosis is the Bootloader of the QUO board, it's inserted into the BIOS with some files, to simplify things, it'll let you boot Apple OS without any required file on the HDD, just like a Mac .
    1 point
  39. Ok. Look this: How do I repair permissions and rebuild the cache - Yosemite and later
    1 point
  40. This is some gifs that I've want to share with you here. If you wanna post others funny gifs, please post it too. But follow the rules please, don't post anything offencive or immoral.
    1 point
  41. thank your .great work. just tested it and successful
    1 point
  42. Ok i had some problems because of the testing phase, but here it is, tinu updated to create macOS Mojave installers: Download the app: https://github.com/ITzTravelInTime/TINU/releases source code: https://github.com/ITzTravelInTime/TINU/ Note that if you use it on macOS Mojave beta and you try to create a macOS Mojave beta bootable installer it will ask you to install the xcode command line tools, and note that this is not caused by TINU, this is done by the "createinstallmedia", which is the executable that both TINU and the terminal method uses to create the bootable usb thumb drive @xtddd try this new version
    1 point
  43. Using UDK2018 We can compile Clover with UDK2018 and not bother about EDK2 beta updates. Step by step from clear. 1. Install macOS. Preferably 10.13.x at this moment 2. Install Xcode. I am using Xcode 9.3.1 now. Install Command Line Tools. Xcode 10.1 in 10.13.6 is better. 3. Download NASM https://www.nasm.us/pub/nasm/releasebuilds/2.13.03/macosx/nasm-2.13.03-macosx.zip, unpack and copy to /opt/local/bin The folder may be invisible then sudo chflags nohidden /opt or it may not exists then sudo mkdir -p /opt/local/bin then sudo cp ~/Downloads/nasm-2.13.03/nasm /opt/local/bin 4. Prepare sources cd ~ mkdir src cd src git clone https://github.com/tianocore/edk2 -b UDK2018 --depth 1 UDK2018 cd UDK2018 svn co svn://svn.code.sf.net/p/cloverefiboot/code/ Clover make -C BaseTools/Source/C ./edksetup.sh cd Clover ./buildgettext.sh ./buildmtoc.sh cp -R Patches_for_UDK2018/* ../ ./ebuild.sh -fr Patches_for_EDK2 revision 4472 is compatible with UDK2018, but there is own patch set. Since 4486 we should use Patches_for_UDK2018. 5. And finally create installer cd ~/src/UDK2018/Clover/CloverPackage/ ./makepkg DEPRECATED! Since moving to GitHub we need no more UDK2018 or EDK2. All those sources included into the Clover repo and we will improve them own way.
    1 point
  44. Thank you, you are the best
    1 point
×
×
  • Create New...