Leaderboard
Popular Content
Showing content with the highest reputation on 06/11/2018 in all areas
-
[pre-release] macOS Mojave
illdev and 6 others reacted to fusion71au for a topic
You can clean install Mojave beta on an HFS partition with a patched OSInstall.mpkg (this starts core.pkg installation) ---> bypasses compatibility checks. See post#258 in macrumors unsupported macs thread, credit to @foxlet. After the package installer completes, copy boot.efi (from "Misc Files.zip" attachment or extract yourself from BaseSystem.dmg with Pacifist) to /S/L/CoreServices of the Mojave volume, and copy SeedEnrollment.plist file into the /Users/Shared folder with the "." prefix so it becomes a hidden system file eg if SeedEnrollment.plist is in your ~/Downloads fol7 points -
4 points
-
Lately, it seems that specifying the repositories as svn+ssh:// instead of svn:// results in more reliable and perhaps slightly faster performance (at least for me). This would change the transfer protocol to ssh (svn is used only locally), which seems to perform better than svn as the transfer protocol (don't expect it to be much faster, but at least it doesn't seem to time out and disconnect duing the transfer). The changes would look like this in buildclover script: For Clover: "svn+ssh://svn.code.sf.net/p/cloverefiboot/code" For EDK2: "svn+ssh://svn.code.sf.net/p/edk2/code/3 points
-
Your Corsair is broken2 points
-
For me is working too, update went well I updated in 10 minutes... I have sound and ethernet... all works.2 points
-
[pre-release] macOS Mojave
nomadturk and one other reacted to crazybirdy for a topic
I can't, no verbose hangs, it boot system to gray screen and mouse cursor, then reboot itself. I think,maybe some kexts or frameworks cause the reboot issue. I may try to remove some kexts to test it when i have free time.2 points -
Now it works in almost many Unsupported Macs and Hackintoshs including Core2Duo as shown, it only needs some patience and searching for a solution, because solutions exists already, it only depend on what you know and what you don't know yet2 points
-
I've just installed Cuda 396.64 under macOS 10.14 Beta and it's kext loaded. The only problem here is, "No Compatible CUDA Graphics found" when I tried running CUDA-z.app, so... uhmb, forget it #atm.2 points
-
This is the file i was using in High Sierra. DisplayVendorID-dae.zip2 points
-
1 minute delay. Can anyone tell me what's going on?
iamwithstupid and one other reacted to MaLd0n for a topic
post a full dump RunMe.app2 points -
-Donations with PayPal https://tinyurl.com/r2bvzm7 -Donations with Bitcoin 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3 -Donations with PicPay @danielnmaldonado ***The topic is for Notebooks and Desktops*** Install MacOS with Olarila Image, Step by Step, Install and Post Install https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/ Mobos serie 400 with 10th processors, use MacBookAir9,1 smbios for now1 point
-
Including the guide in the Dell optiplex 790.zip. • Dell Optiplex 790 – This is necessary to install macOS Sierra for this tutorial • A copy of Mac OS X – This can be in the form of an existing hackintosh, within Windows or Linux, or even a regular Mac. • A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). • A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, which is available for free from the1 point
-
DSDT method still works, attached dsdt is for Fermi and HDAU is missing; no HDMI audio SSDT-HDMI-NVIDIA-PEGP@1 will not work with dsdt edits, remove ssdt. Reboot with native dsdt and run cloverALC. For 10.13.4 and newer, all non native Nvidia HDMI codec device ids have been removed from AppleHDAController.kext. Kext patch is required, credit FredWst/[pre-release] macOS High Sierra 10.13.4 - Page 18 - New Releases and Updates GTX 960/Add and edit/Replace: from 10deb90f to 10de0fba1 point
-
macOS Mojave - Launched
RandomTech reacted to surfinchina for a topic
Yes. Also Geekbench went from 149000 to 182000 for me. My 7900x went from 6100/43500 to 6300/48000 in CPU Geekbench In reality though I'm getting some artifacts in windows and my main software isn't accelerated now. Eagerly anticipating a more refined beta and/or a fixed software1 point -
Thanks a lot, this idea and access made me be able to get it working. EFImounter saved the situation, now all I need is dual display and Mojave complete1 point
-
sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/your_volume "--applicationpath" é depreciado.1 point
-
1 point
-
Build_Clover.command, another Script to build standard Clover (or customized)
Badruzeus reacted to Philip Petev for a topic
Sure, it works, but using this protocol requires SF credentials (account) and many people don't have such, otherwise I would have added this a long time ago.1 point -
Yeah, gonna wait for updates, till now is completely usable for me1 point
-
mkdir -p is your friend... Then read how arsradu solved it.1 point
-
1 point
-
I just run build_clover script under Ubuntu 18.04 and also got issue with network connectivity.. it seems something wrong with the server but I'm not really sure, done with local ~/src rebuilt from scratch this morning under mac, then tonight we see this.1 point
-
gate way issue happen when getting clover source from svn in windows. normally, i commit source in windows after download clean clover source to avoid mistake. but in last 2days, i never download clean source in windows from svn. always shown connection problem(gate way too. it means host disconnect my connection in sf. so i can't access sf site for some times). i just hope sf will back. because now i have a some part to cleanup clover source. 나의 LG-F800S 의 Tapatalk에서 보냄1 point
-
[pre-release] macOS Mojave
nmano reacted to wern apfel for a topic
With the AppleALC I attached on my previous post, it works without any changes except the boot arguments.1 point -
[pre-release] macOS Mojave
ANONIMNIQ reacted to crazybirdy for a topic
The compatibility check is only for installation. Compatibility is not a issue. I can boot to installation screen, and install Mojave as GPT+APFS, or GPT+HFS+J, or MBR+HFS+J successful. (will not convert to APFS.) My problem is, After installation finished, it can not boot into the installed Mojave system with all the three types above. I think, it's E8400 without SSE4.2 issue. I can't figure out why Ecefer said it works with E7500? I already ask for his config.plist, not reply yet. I think we need more info. how Ecefer made it worked?1 point -
[pre-release] macOS Mojave
Badruzeus reacted to crazybirdy for a topic
It's only one user Ecefer post it work without anything, no more evidence, that's why I'm not sure it's really work or not.1 point -
[pre-release] macOS Mojave
crazybirdy reacted to ammoune78 for a topic
I do not have a LGA775 socket components to test it, but you have to review your config.plist and check your DSDT or graphics card, it might be a trick for that! If people not only one user, but users confirmed that it work, then you just have to check or ask for a config.plist that already working!1 point -
[pre-release] macOS Mojave
crazybirdy reacted to ammoune78 for a topic
Broadcom cards give continuity support, i can receive calls on my laptop hack with Atheros, but missing airplay, airdrop and other things.1 point -
[pre-release] macOS Mojave
crazybirdy reacted to ammoune78 for a topic
Forum Macrumors has confirmed that Core2Due working on Mojave as its shown in the screenshot: Just search on the net, you'll find the fix1 point -
[pre-release] macOS Mojave
iamprabhuantony reacted to ANONIMNIQ for a topic
https://github.com/Dids/clover-builder/releases1 point -
It's actually the same for me with Adobe Lightroom. It's not endless spinning wheel. But it is very, very slow. Doing anything, moving any slider is laggy. And it is kind of annoying to use. It makes actually getting some work done pretty hard and frustrating. But hey, I didn't expect it to run smoothly from the very beginning.:)) And especially on a BETA. :))) So, yeah, I'm pretty happy that it actually runs. And, as I said before, and as the actual OS warns about (at least in my case), some apps are not yet optimised. This will most likely be fixed in the future. Glad I could hel1 point
-
In the DSDT or the SSDT you use, replace: "layout-id", with "alc-layout-id", Add -alcbeta -lilubetaall into the boot-args and use AppleALC_1.2.8v2.zip this was picked from @arsradu post in AppleALC topic This is if you already use AppleALC kext solution, if you use another solution ignore this comment1 point
-
[pre-release] macOS Mojave
ammoune78 reacted to AppleHackDan for a topic
I have searched through my Hack and removed anything that pertained to PS2. I removed something like ApplePS2Nub, and good news, multitouch works! The bad news, however, is that if I want to move the pointer, I have to press hard on the trackpad, but we are getting somewhere. At least now I can enjoy the many gestures I used in Sierra.1 point -
This is simply not true, they have removed a ton of previously supported devices and also changed how things normally worked with its actual supported devices. Just because it worked in previous macOS versions does not mean it will work with Mojave.1 point
-
1 point
-
1 point
-
Hi, thanks for the report, I can confirm that the check has changed. I committed a temporary workaround in the latest update, hopefully it will work for the time being, though I am starting to like the idea less and less.1 point
-
The reason of requesting this info is that my ROM Chip has only 64Mb, AppleALC can be resized to about 19Kb, but the last release of Lilu have 1.3Mb and its size can't be reduced. So i can't upgrade AppleALC to the latest into the ROM because of the latest lily size, i've to stay with AppleALC 1.2.4 if i need it to be on the ROM. Ozmosis is the Bootloader of the QUO board, it's inserted into the BIOS with some files, to simplify things, it'll let you boot Apple OS without any required file on the HDD, just like a Mac .1 point
-
Well guess it was just a glitch, now its booting. Even with only apfs.efi, AptioMemoryFix.efi and HFS+.efi1 point
-
thank your .great work. just tested it and successful1 point
-
TINU: The bootable macOS installer creation tool - Mac app
Matgen84 reacted to ITzTravelInTime for a topic
Ok i had some problems because of the testing phase, but here it is, tinu updated to create macOS Mojave installers: Download the app: https://github.com/ITzTravelInTime/TINU/releases source code: https://github.com/ITzTravelInTime/TINU/ Note that if you use it on macOS Mojave beta and you try to create a macOS Mojave beta bootable installer it will ask you to install the xcode command line tools, and note that this is not caused by TINU, this is done by the "createinstallmedia", which is the executable that both TINU and the terminal method uses to create1 point -
Hmmm very good, but...why you aren't using Dark Mode?? Just kidding1 point
-
Ozmosis for 100 Series Skylake CPU's and up
Si Vis Pacem reacted to cecekpawon for a topic
@jym The quick way to boot into your shell without embedding it in your rom is to copy your shell binary (shell*.efi) to X:\EFI\BOOT\BOOTX64.efi (somewhere on fat32 fd), and then boot from there with csm disabled.1 point -
Using UDK2018 We can compile Clover with UDK2018 and not bother about EDK2 beta updates. Step by step from clear. 1. Install macOS. Preferably 10.13.x at this moment 2. Install Xcode. I am using Xcode 9.3.1 now. Install Command Line Tools. Xcode 10.1 in 10.13.6 is better. 3. Download NASM https://www.nasm.us/pub/nasm/releasebuilds/2.13.03/macosx/nasm-2.13.03-macosx.zip, unpack and copy to /opt/local/bin The folder may be invisible then sudo chflags nohidden /opt or it may not exists then sudo mkdir -p /opt/local/bin then sudo cp ~/Do1 point
-
1 point
-
Newsletter