Leaderboard

@jin2k9 Try this: Trial_CX20641_LayoutID11_(0B).zip AppleALC and Lilu in Clovers /other folder original AppleHDA in S/L/E is required delete all VoodooHDA files KextInject "YES" in Clover Inject via Clover: Inject 11 and set FixHDA Inject via DSDT: DSDT / HDEF is 0B (= 11) not set FixHDA in Clover your dump: Nodes: 28 - 16 25 - 17 20 - 26 21 - 27 @junoir Try this: Trial_CX20642_LayoutID11_(0B).zip AppleALC and Lilu in Clovers /other folder original AppleHDA in S/L/E is required delete all VoodooHDA files KextInject "YES" in Clover Inject via Clover: Inject 11 and set FixHDA Inject via DSDT: DSDT / HDEF is 0B (= 11) not set FixHDA in Clover your dump: Nodes: 28 - 16 25 - 17 20 - 26 21 - 29 Both first attempts in ManualMode! If it works later in SwitchMode configuration! have fun

Here is an update about the design changements to the app, and note that it's still work in progress. The 1ST screenshot shows that i have added a "get an installer app" button to the requrements screen of tinu, but i have to better implement it into the design of this interface, i will keep you updated about that The 2ND screenshot shows how will appear the "choose an usb thumb drive" screen if no usable usb drives are detected The 3RD screenshot shows how will appear the "choose an installer app" screen of the app when no usable installer apps are detected in the system, compared to the previous screenshot i have redesigned the screen to make it like the previous one and i have also added a bigger button to open an installer app from a custom location, but when installer apps are detetced, this button will be smaller and in the center of the window , aligned with other buttons in the bottom of the window. The 4TH screenshow shows that now the "download a macOS installer app fom the app store" window now is a dialog window which appers as a sheet from the main window and also some text has been changed For the progress bar thing i am still working on it, but i have to finish some other ui things first.

ergot.zip full patches in config plist for rename devices EVMR to PMCR 4556 4d52 504d 4352 GLAN to GIGE 474c 414e 4749 4745 ALZA to HDEF 414c 5a41 4844 4546 LPC0 to LPCB 4c50 4330 4c50 4342 SMBS to SBUS 534d 4253 5342 5553 XHCI to XHC 5848 4349 5848 435f SAT1 to SATA 5341 5431 5341 5441 HECI to IMEI 4845 4349 494d 4549 EVSS to SAT0 4556 5353 5341 5430 drop all oem and update ur clover bootloader

It's spring here and peach flowers are opening everywhere, looks like pink snow covering the ground.

Holy you really are the best. Thanks a lot mate. Is that Beer link still up to date?

Fn not working,so including brightness and keyboard light, not test wake / lid yet battery ok elan touchpad not work, now I am using 1.0.4 elan 1300 driver on S L E sound I use voodoohda, applealc not worked. but still on clover by the time this run me app http://www51.zippyshare.com/v/VymsqaYn/file.html

VICTORY!! I got the card with the bad flash working again. And got the correct UEFI Bios from Sapphire (big thumps up to their support. Very fas and service minded!). I have flashed with the new UEFI BIOS. Changed to Windows 8 and set it to never to remove CSM and now the menu problem is gone :-D Clear and sharp Clover menu in 2560x1440. Thank you so much for all you help and good advice!

it is already on /S/L/E. BTW, you have also Voodooi2c,kext on clover/kexts/other on clover zippyshare

Voodooi2CELAN.kext is the core kext for /S/L/E ? Keyboard and Keypad dead now...luckily I have bluetooth key and mouse here the symptoms log show --predicate 'process == "kernel"' --start "2018-03-23 00:15:00" > voodooi2clog.txt 018-03-23 00:25:31.344338+0700 0x549 Default 0x0 0 0 kernel: (kernel) VoodooGPIOSunrisePointLP::Loading GPIO Data for SunrisePoint-LP 2018-03-23 00:25:31.344455+0700 0x549 Default 0x0 0 0 kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Init! 2018-03-23 00:25:31.344459+0700 0x549 Default 0x0 0 0 kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 0 2018-03-23 00:25:31.344503+0700 0x549 Default 0x0 0 0 kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 1 2018-03-23 00:25:31.344534+0700 0x549 Default 0x0 0 0 kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 2 2018-03-23 00:25:31.344646+0700 0x130 Default 0x0 0 0 kernel: (kernel) VoodooGPIOSunrisePointLP::GPIO Controller is already awake! Not reinitializing. 2018-03-23 00:25:31.346286+0700 0x553 Default 0x0 0 0 kernel: (AppleHDAController) Sound assertion in AppleHDAController at line 436 2018-03-23 00:25:31.346291+0700 0x553 Default 0x0 0 0 kernel: (AppleHDAController) Sound assertion in AppleHDAController at line 385 2018-03-23 00:25:31.347913+0700 0x543 Default 0x0 0 0 kernel: (IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x3800 **** 2018-03-23 00:25:31.353306+0700 0x536 Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Starting I2C controller 2018-03-23 00:25:31.353345+0700 0x536 Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Set PCI power state D0 2018-03-23 00:25:31.353361+0700 0x534 Default 0x0 0 0 kernel: (AppleOnboardSerial) Identified Serial Port UA00 at 0x7f9102d000(<private>) 2018-03-23 00:25:31.353380+0700 0x536 Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Publishing nub 2018-03-23 00:25:31.354978+0700 0x542 Default 0x0 0 0 kernel: com_apple_driver_eficheck::probe(LPCB) 2018-03-23 00:25:31.355141+0700 0x542 Default 0x0 0 0 kernel: (kernel) SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0xffff, Winbond sequence ID=0xffff 2018-03-23 00:25:31.355156+0700 0x542 Default 0x0 0 0 kernel: com_apple_driver_eficheck::start(LPCB) <1> 2018-03-23 00:25:31.356854+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Probing controller 2018-03-23 00:25:31.356870+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Found valid Synopsys component, continuing with initialisation 2018-03-23 00:25:31.357102+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerNub::pci8086,9d61 SSCN not implemented in ACPI tables 2018-03-23 00:25:31.357113+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerNub::pci8086,9d61 FMCN not implemented in ACPI tables 2018-03-23 00:25:31.357118+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Warning: Error getting bus config, using defaults where necessary 2018-03-23 00:25:31.357133+0700 0x562 Default 0x0 0 0 kernel: IOSerialBSDClient: not registry member at registerService() 2018-03-23 00:25:31.359014+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Publishing device nubs 2018-03-23 00:25:31.359017+0700 0x532 Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Starting I2C controller 2018-03-23 00:25:31.359026+0700 0x563 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Found I2C device: ELAN1300 2018-03-23 00:25:31.359080+0700 0x532 Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Set PCI power state D0 2018-03-23 00:25:31.359119+0700 0x532 Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Publishing nub 2018-03-23 00:25:31.363895+0700 0x56d Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Probing controller 2018-03-23 00:25:31.363907+0700 0x56d Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found valid Synopsys component, continuing with initialisation 2018-03-23 00:25:31.364027+0700 0x56d Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 SSCN not implemented in ACPI tables 2018-03-23 00:25:31.364039+0700 0x56d Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 FMCN not implemented in ACPI tables 2018-03-23 00:25:31.364044+0700 0x56d Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Warning: Error getting bus config, using defaults where necessary 2018-03-23 00:25:31.364070+0700 0x56d Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Publishing device nubs Error getting bus config I think....I uploaded the log... Because I removed AppleHPM.kext and AppleIntelLpssi2c.kext and AppleIntelLpssi2controller.kext from /S/L/E? trying put back there on... HDaudio As windows said. conexant but what cx series I don't know... Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000 voodooi2clog.txt

Sono nuovo e volevo salutare tutti

Hey mald0n Where cane see success fully DSDT patched in system report Sent from my GT-I9195 using Tapatalk

intel HD Graphics 530 GeForce GTX 950A ----------------------------------------------- _SB.PC10.PEG0.PEGP

i'm going with it. now i tell you. thnks. it seems that the cmos is corrupt....

The issue is solved, we had to put the thumb-drive directly on an USB socket on the mobo. Thanks anyway!

Yup

Maldon, I like your Photography Style and the way of Art you ar doing it... Nativly & Expressionsfull

@MaLd0n Was wondering when you have a chance can you take a look at the system? You and I have similar dual cpu setups. And is there a way instead of DSDT to do SSDT? makes debugging the problematic lines much easier. https://www.dropbox.com/s/raa046i4f37pm8x/Send me Balamut-Mac-Pro.zip?dl=0

Chat support is fundamentally necessary for VoodooI2C due to the complicated nature of the driver. It is practically impossible to create a "one-step" guide and a "one-step" debugging process due to various issues arising with how macOS implements APIC interrupts. We are forced to "hack" GPIO interrupt support in which means a high level of manual patching is required. When this goes wrong, a static bug reporting format (such as in a forum thread) makes it very difficult to debug end user issues since the support team usually has to go back and forth with the user receiving many iterations of troubleshooting archives. It is far easier to debug something instantly than wait (potentially days) for a user to reply only to have forgotten what the issue was in the first place (not to mention the likely scenario of having many other posts from other users appearing since that user last posted). It is a fair point regarding the readme of the native branch and I will update this accordingly. It would have been helpful, however, for you to point this out to me. When it comes to your pros/cons list for your Dell XPS 9550, I have some issues. Namely that I, myself, have a Dell XPS 9550 and I develop specifically for this machine. That means that nothing is released if it doesn't work for me on this machine. I do not experience any crashes on boot nor on wake/sleep. My (USB) touchscreen also works beautifully with @blankmac's touchscreen driver which is baked into VoodooI2CHID. In future the HID part of the driver will be separated out so that it is agnostic from the I2C/USB protocol. For the moment, however, USB touchscreens and trackpads required VoodooI2C.kext and VoodooI2CHID.kext installed. If you experience issues with the kext as you listed then you should have submitted your troubleshooting archives to us. That's the process everyone goes through and I guarantee VoodooI2C v2.0.1 is far more stable than you make it out to be. Edit: Finally, I should also point out one last very important thing regarding the native branch. I have not yet done the due diligence in determining to what extent the legality of simulating the magic trackpad 2 is. This issue requires more careful thought. It could be in the end that I deem it not a good idea for such a thing to be in the public domain. This is one of the reasons for which I cannot approve of any build of the native branch going out.

fabiosun, Cyberdevs please try this: smarter.zip

1) There is no publicly documented trap'ing on memory access (for MMIO). 2) T2 also embeds the SSD controller and verifies the firmware.

Well, my GTX 650 didn't have a UEFI GOP VBIOS initially (and officially). Requested one on MSi forum, flashed it, all fine ever since. So it's definitely not a lost cause. Also, in my experience, the CSMVideoDxe driver created more issues than it solved. Personally I would suggest pushing towards a UEFI VBIOS, if possible, and solving this issue once and for all. At least that's my opinion.

u use fake intelgfx 0x59168086, InjectIntel and ig-platform-id 0x591b0000 and last kexts fix Pasta Sem Título.zip

CLOVER.zip DSDT.Nanorise.zip send me ioreg after reboot, need check usb devices, have xhc and xhci IORegistryExplorer.app.zip Hey, Pavo try CLOVER Pavo.zip

send me, read first post

CLOVER.zip install nvidia web driver

use XHCI-200-series-injector.kext too

no try a darkwake option in config.plist

shazeal.zip what system version? what smbios?

is a clover driver, use OsxAptioFixDrv-64.efi or 2 u need to check what probvelm cause sleep fail log show --style syslog | fgrep "Wake reason" use search forum for video problem in sierra 10.12.6

use voodoohda

Welcome! Enjoy!

u dont need modify, clover apply and files stay untouched

CLOVER.zip clover on the fly

if u use HighSierra, check patch usb in config.plist for HS CLOVER.zip why u dont use on the fly patch instead terminal command? just remove _prw from devices, is a very old problem and patch CLOVER.zip CLOVER.zip CLOVER.zip DSDT.leeroye.zip

log show --style syslog | fgrep "Wake reason" CLOVER.zip

dont use my dsdt, only if u have same bios version and same mobo, u need extract ur DSDT and edit all hacks need DSDT edit

video = clover config CLOVER.zip

OHHH, good, thx CLOVER.zip

imei load native only if u use intelHD

ye kabylake need 10.12.6 or HS for native support welcome enjoy

what id u use in clover, in dsdt i inject 1, if work in clover, just use correct id for ur codec

what happens with sleep? try a darkwake? disable auto sleep TH, hot plug dont work, power ur computer with device connect use a fresh install, just install clover and replace folder welcome enjoy

Fix for ICH10 with High Sierra. Now with hot-plug support. For this we need two binary patches. First patch fix I/O error for ICH10: 4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B With second patch will work hot-plug: 89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090 With these two patches I got ICH10 with hot-plug. Good luck

hehe zip folder and post here

post ur full clover folder

check config.plist use KernelPM too

check flags https://github.com/vit9696/AppleALC/wiki/Installation-and-usage try with a Kernel CPU

try a darkwake option, check ur config.plist nothing, bro

i think ur ssdt have usb device too send me tables, run it RunMe.app.zip

take it easy new test, just replace DSDT.02.zip