DislikeYou Posted August 4, 2011 Share Posted August 4, 2011 GA-EX58-UD5 USB GUIDE Bios Settings: Boot to BIOS and choose Optimize Settings.1. M.I.T. - Default 2. Standard CMOS Features - Not Applicable 3. Advanced BIOS Features - Default 4. Integrated Peripherals - XHA - Disabled - ICH SATA Controller - Enabled - USB Keyboard - Enabled - USB Mouse - Enabled - On Board LAN1 Boot Rom - Enabled (needed to get LAN working) - On Board SATA.IDE Device - Disabled 5. Power Management Setup - HPET Moded - 64-bit [1] Download my package with kexts and tools. [2] Run MyHack and choose "Create OS X 10.7 Install Disk". [3] Press OK and type your Password. [4] Select the USB stick where to install Chameleon / OSX Installer to. [5] Browse for the OSX Lion dmg file and let MyHack to extract it to the USB stick. [6] Chose to only install Chameleon and then copy the Extra folder from my package to the root of the USB stick. [7] Reboot and Boot from the USB stick (do not use -v unless it gets stuck when spinning at apple logo). [8] Using "Disk Utility" format your HDD as GPT and HFS+ and install OSX to it. [9] Using USB stick, boot into the HDD where you installed OSX. [10] Install MyHack again but this time to your HDD. [11] Chose to only install Chameleon and then copy the Extra folder from my package to the root of the OSX HDD. [12] Run MyFix and type your password, select the number of the Lion HDD. Reboot and it should be working. If it does not, probably my package is not fully working on your system and you have to use your own files. Working 100%:Sound Graphics Ethernet Sleep Apple BT Keyboard / Belkin BT Mouse Logitech Quickcam E3500 Notes: Booting is little slow (1 min on my system). DSDT is for i7 930 CPU. I have added npci=0x2000 in boot.plist to fix the "Pci Configuration Begin" error. Link to comment Share on other sites More sharing options...
rkingj Posted October 9, 2011 Share Posted October 9, 2011 works well, thanks a lot! Link to comment Share on other sites More sharing options...
Recommended Posts