Jump to content

Configuración Basica Bios. Hackintosh basic bios configuration.


2 posts in this topic

Recommended Posts

lo encontre en un post ruso hace unos días.

 

esta bien saberlo.

 

Standard CMOS Features: Date: [set]

Time: [set]

Drive A: [None]

Floppy 3 Mode Support: [Disabled]

Halt On: [No Errors]

Advanced BIOS Features:

Hard Disk boot Priority: [set your boot drive as #1]

First Boot Device: [Hard Disk]

Second Boot Device: [CDROM]

Third Boot Device: [Disabled]

Boot Up Floppy Seek: [Disabled]

Boot Up Num-Lock: [On]

Password Check: [setup if desired]

HDD S.M.A.R.T. Capability: [Enabled]

Limit CPUID Max. to 3: [Disabled]

No-Execute Memory Protect: [Enabled]

Delay for HDD (Secs): [0]

Full Screen LOGO Show: [Disabled]

Init Display First: [PEG]

Integrated Peripherals:

SATA RAID/AHCI Mode: [AHCI]

SATA Port0-3 Native mode: [Enabled]

USB Controller: [Enabled]

USB 2.0 Controller: [Enabled]

USB Keyboard Function: [Enabled]

USB Mouse Function: [Enabled]

USB Storage Function: [Enabled]

Azalia Codec: [Enabled] * Disable this if you are using a separate sound card Onboard

H/W 1394: [Enabled]

Onboard H/W LAN1: [Enabled] * Disable this if you are using a separate network card Onboard

H/W LAN2: [Disabled] * You can enable this if you want to use both NICs

Green LAN: [Disabled]

SMART LAN1: [Press Enter]

SMART LAN2: [Press Enter]

Onboard LAN1 Boot ROM: [Disabled]

Onboard LAN2 Boot ROM: [Disabled]

Onboard SATA/IDE Device: [Enabled]

Onboard SATA/IDE Ctrl Mode: [AHCI]

Smart Backup: [Disabled]

Power Management Setup: ACPI Suspend Type: [s3(STR)]

USB Device Wake-Up From S3: [Enabled]

Soft-Off by PWR-BTTN: [instant-Off]

PME Event Wake Up: [Disabled]

Power On by Ring: [Disabled]

Resume by Alarm: [Disabled]

HPET Support: [Enabled]

HPET Mode: [64-bit mode]

Power On By Mouse: [Disabled]

Power On By Keyboard: [Disabled]

AC Back Function: [soft-Off]

Link to comment
Share on other sites

yo tengo este

 

1. Start by using Load Optimized Defaults.

 

2. In M.I.T. Advanced Memory Settings:

Exteme Memory Profile(X.M.P.) -> Profile1

Performance Enhance -> Standard

 

3. In M.I.T. Advanced Frequency Settings:

Under Advanced CPU Core Features:

Intel® Turbo Boot Tech. -> Enabled

CPU Enhanced Halt (C1E) -> Enabled

C3/C6/C7 State Support -> Enabled

CPU Thermal Monitor -> Enabled

CPU EIST Function -> Enabled

Bi-Directional PROCHOT -> Enabled

 

4. In Integrated Peripherals

ICH SATA Control Mode -> AHCI

SATA Port0-3 Native Mode -> Enabled

eSATA Ctrl Mode -> AHCI

GSATA 6_7/IDE Ctrl Mode -> AHCI

GSATA 8_9/IDE Ctrl Mode -> AHCI

 

5. In Power Management:

HPET Mode -> 64-bit mode

 

6. In Advanced BIOS Features:

Quick Boot -> Enabled

Third Boot Device Floppy -> Disabled

HDD S.M.A.R.T. Capability -> Enabled

Full Screen LOGO Show -> Disabled

Init Display First PCI -> PCIE x16-1

 

7. In Integrated Peripherals:

GSATA 6_7/IDE Controller -> Disabled

GSATA 8_9/IDE Controller -> Disabled

 

8. In Power Management:

Soft-Off by PWR-BTTN -> Delay 4 Sec.

 

9. In PC Health Status:

CPU Warning Temperature -> 60C/140F

CPU FAN Fail Warning -> Enabled

Link to comment
Share on other sites

 Share

×
×
  • Create New...