Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. post one full dump --Run_Me RunMe.app https://www.youtube.com/watch?v=k9wmIfGLe3A
  3. MaLd0n


    POSTE OS ARQUIVOS PARA EDIÇÃO --Run_Me RunMe.app https://www.youtube.com/watch?v=k9wmIfGLe3A
  4. kolodzieski

    [GUIDE] Lenovo T460 macOS with Clover

    https://github.com/ESProcessing/OS-X-BrcmPatchRAM -- now has all the changes + the logging I mentions in the previous post. boot args are not needed IF your card uses firmware 0489_e07a. Attached are the release binaries. brcm.tar.gz
  5. 'tried to revert to good old FakeSMC instead of VirtualSMC since it appears to be the culprit?
  6. Reboot fix patch in my case helped for msr locked and fakecpuid helped for xcpm i have to use both ti boot
  7. So you used this patch to get XCPM to load. Is that right?
  8. Hi @headkaze, In first place thank you very much for the excellent tool, and I want to know why my hack in the Platform ID doesn't have any value, is an error or it is because I don't have an DGPU? Its only my curiosity speaking... Thanks PS: Corrected in Hackintool v2.3.5...
  9. Yes i used reboot fix patch and fakecpuid in that era but my Cpu was of an unknown type for a real Mac
  10. shadowblack3


    Olá, Gostaria de saber se alguém me ajudaria a fazer uma dsdt ou SSDT para minha configuração? Sou leigo nesse assunto, cheguei até pesquisar sobre, mais minha cabeça deu um nó. Agradeço desde já.
  11. Today
  12. Hey guys, I just can't for the life of me figure out my sleep issues. To start, I'm using i7 4770K, 16GB RAM, Gigabyte Z87X-UD4H, RX 560 (Asus). I had been using Sierra using tonymacx86 instructions for a couple years and my system worked flawlessly. Initially, it would either fail to sleep (wakeup immediately after sleep) or would crash on wake. After messing with darkwake settings (I think I had it set to 2), sleep worked perfect. Then I upgraded to Mojave, and that's where stuff has gone very south. First I used a fresh, vanilla install using a guide on the reddit Hackintosh community. Worked perfect, but intermittent kernel panics on wake. Then I came here and did a custom DSDT thanks to a very awesome user, @MaLd0n. The intermittent panics would persist. So then I used Mald0n's Mojave guide, and the custom DSDT and clover folder, and same problem. Where things currently stand, I would say the computer sleeps perfect about 2/3 of the time. The other 1/3 of the time, it wakes up but there is no signal going to the monitor, and the HD activity light doesn't blink or anything. After a reboot, I get a message about recovering from a panic. I've once again messed with darkwake settings, ranging from no darkwake, darkwake=0, darkwake=1, 2, 3, 10, etc. Same problem. I am now running Mojave 10.14.4, but have tried 10.14.3 as well. Before I wipe this thing out and consider myself stuck at staying on Sierra, I'm hoping to make one last effort. I've been pulling my hair out. Any pointers would be amazing! What kind of info can I supply? Here's the most recent error report on reboot, FYI: Wed Apr 24 11:35:22 2019 *** Panic Report *** panic(cpu 3 caller 0xffffff801e6dd16d): Kernel trap at 0xffffff801e5ad330, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0x00000e7165acce6a, CR3: 0x000000020205b002, CR4: 0x00000000001626e0 RAX: 0xffffff801f026490, RBX: 0x00000e7165acce92, RCX: 0xffffff801f026478, RDX: 0x0000000002000000 RSP: 0xffffff820678bed0, RBP: 0xffffff820678bef0, RSI: 0x0000000000000001, RDI: 0xffffff806b5c4540 R8: 0x000070000da8b600, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000 R12: 0x000070000da8b608, R13: 0xffffff8048f04c60, R14: 0xffffff801f026478, R15: 0x0000000000000599 RFL: 0x0000000000010203, RIP: 0xffffff801e5ad330, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x00000e7165acce6a, Error code: 0x0000000000000000, Fault CPU: 0x3, PL: 0, VF: 1 Backtrace (CPU 3), Frame : Return Address 0xffffff820678b860 : 0xffffff801e5af82d 0xffffff820678b8b0 : 0xffffff801e6eb795 0xffffff820678b8f0 : 0xffffff801e6dcf4a 0xffffff820678b960 : 0xffffff7fa3b21077 0xffffff820678ba00 : 0xffffff801e55cae0 0xffffff820678ba20 : 0xffffff801e5af247 0xffffff820678bb40 : 0xffffff801e5af093 0xffffff820678bbb0 : 0xffffff801e6dd16d 0xffffff820678bd20 : 0xffffff7fa3b21077 0xffffff820678bdc0 : 0xffffff801e55cae0 0xffffff820678bde0 : 0xffffff801e5ad330 0xffffff820678bef0 : 0xffffff801eaf933f 0xffffff820678bf40 : 0xffffff801ebbb0ed 0xffffff820678bfa0 : 0xffffff801e55d2a6 Kernel Extensions in backtrace: as.vit9696.VirtualSMC(1.0.3)[C6AEDE3E-407E-30C5-B2C5-8A43F6D3E9BF]@0xffffff7fa3b12000->0xffffff7fa3b31fff dependency: as.vit9696.Lilu(1.3.5)[0B2F7B65-4851-39F3-AD9C-D929CA81750D]@0xffffff7fa3a99000 dependency: com.apple.iokit.IOACPIFamily(1.4)[7706F483-87AE-3F44-BCCA-09C156F4E031]@0xffffff7f9f60d000 BSD process name corresponding to current thread: launchd Boot args: dart=0 debug=0x100 shikigva=60 -v darkwake=2 Mac OS version: 18E226 Kernel version: Darwin Kernel Version 18.5.0: Mon Mar 11 20:40:32 PDT 2019; root:xnu-4903.251.3~3/RELEASE_X86_64 Kernel UUID: 4170BF94-38B6-364F-A1B0-2F7C2C30F9A9 Kernel slide: 0x000000001e200000 Kernel text base: 0xffffff801e400000 __HIB text base: 0xffffff801e300000 System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61) System uptime in nanoseconds: 15922346664030 last loaded kext at 8405147536785: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa3ced000, size 32768) last unloaded kext at 8475139244554: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa3ced000, size 32768) loaded kexts: at.obdev.nke.LittleSnitch 5267 ru.joedm.SMCSuperIO 1.0.3 com.insanelymac.IntelMausiEthernet 2.5.0d0 as.vit9696.SMCProcessor 1.0.3 org.vulgo.NoVPAJpeg 1.0.0 as.vit9696.AppleALC 1.3.7 as.vit9696.WhateverGreen 1.2.8 com.rehabman.driver.USBInjectAll 0.7.1 ru.usrsse2.SMCLightSensor 1 as.vit9696.VirtualSMC 1.0.3 as.vit9696.Lilu 1.3.5 com.apple.filesystems.smbfs 3.3.2 com.apple.fileutil 20.036.15 com.apple.filesystems.autofs 3.0 com.apple.driver.AppleMikeyHIDDriver 131 com.apple.driver.AppleUpstreamUserClient 3.6.5 com.apple.driver.AppleMCCSControl 1.5.6 com.apple.kext.AMDFramebuffer 2.0.8 com.apple.driver.X86PlatformShim 1.0.0 com.apple.driver.AGPM 110.25.2 com.apple.driver.ApplePlatformEnabler 2.7.0d0 com.apple.filesystems.ntfs 3.13 com.apple.driver.AppleMikeyDriver 282.54 com.apple.kext.AMDRadeonX4000 2.0.8 com.apple.private.KextAudit 1.0 com.apple.AGDCPluginDisplayMetrics 3.30.14 com.apple.driver.AppleHV 1 com.apple.iokit.IOUserEthernet 1.0.1 com.apple.iokit.IOBluetoothSerialManager 6.0.11f4 com.apple.driver.AppleOSXWatchdog 1 com.apple.driver.AppleIntelHD5000Graphics 12.0.8 com.apple.driver.pmtelemetry 1 com.apple.kext.AMD9500Controller 2.0.8 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AppleGFXHDA 100.1.414 com.apple.driver.AppleIntelFramebufferAzul 12.0.8 com.apple.driver.AppleSMCLMU 212 com.apple.driver.AppleLPC 3.1 com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0 com.apple.driver.AppleTopCaseHIDEventDriver 138.3 com.apple.filesystems.apfs 945.250.134 com.apple.driver.AppleVirtIO 2.1.3 com.apple.filesystems.hfs.kext 407.200.4 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.BootCache 40 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0 com.apple.AppleSystemPolicy 1.0 com.apple.driver.AirPort.BrcmNIC 1400.1.1 com.apple.driver.AppleAHCIPort 329.200.2 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 6.1 com.apple.driver.AppleBacklight 170.12.11 com.apple.driver.AppleRTC 2.0 com.apple.driver.AppleSMBIOS 2.1 com.apple.driver.AppleAPIC 1.7 com.apple.nke.applicationfirewall 190 com.apple.security.TMSafetyNet 8 com.apple.kext.triggers 1.0 com.apple.kext.OSvKernDSPLib 528 com.apple.kext.AMDRadeonX4000HWLibs 1.0 com.apple.kext.AMDRadeonX4000HWServices 2.0.8 com.apple.iokit.IOAVBFamily 740.1 com.apple.plugin.IOgPTPPlugin 740.2 com.apple.iokit.IOEthernetAVBController 1.1.0 com.apple.iokit.IOSkywalkFamily 1 com.apple.driver.AppleSSE 1.0 com.apple.driver.AppleSMBusController 1.0.18d1 com.apple.driver.AppleSMBusPCI 1.0.14d1 com.apple.kext.AMDSupport 2.0.8 com.apple.iokit.IOAcceleratorFamily2 404.8 com.apple.iokit.IOSurface 255.4.2 com.apple.driver.X86PlatformPlugin 1.0.0 com.apple.driver.AppleHDAController 282.54 com.apple.iokit.IOHDAFamily 282.54 com.apple.AppleGPUWrangler 3.30.14 com.apple.AppleGraphicsDeviceControl 3.30.14 com.apple.iokit.IOUSBHIDDriver 900.4.2 com.apple.driver.IOPlatformPluginFamily 6.0.0d8 com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0 com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 6.0.11f4 com.apple.iokit.IOBluetoothHostControllerUSBTransport 6.0.11f4 com.apple.iokit.IOBluetoothHostControllerTransport 6.0.11f4 com.apple.driver.AppleHSBluetoothDriver 138.3 com.apple.driver.IOBluetoothHIDDriver 6.0.11f4 com.apple.iokit.IOBluetoothFamily 6.0.11f4 com.apple.driver.AppleHIDKeyboard 208 com.apple.driver.AppleMultitouchDriver 2440.7 com.apple.driver.AppleInputDeviceSupport 2440.2 com.apple.driver.AppleUSBAudio 315.6 com.apple.driver.usb.IOUSBHostHIDDevice 1.2 com.apple.iokit.IOAudioFamily 206.5 com.apple.vecLib.kext 1.2.0 com.apple.driver.usb.networking 5.0.0 com.apple.driver.usb.AppleUSBHub 1.2 com.apple.driver.usb.AppleUSBHostCompositeDevice 1.2 com.apple.iokit.IOSerialFamily 11 com.apple.filesystems.hfs.encodings.kext 1 com.apple.iokit.IOAHCIBlockStorage 301.250.5 com.apple.iokit.IO80211Family 1200.12.2 com.apple.driver.mDNSOffloadUserClient 1.0.1b8 com.apple.driver.corecapture 1.0.4 com.apple.iokit.IOAHCIFamily 288 com.apple.driver.usb.AppleUSBXHCIPCI 1.2 com.apple.driver.usb.AppleUSBXHCI 1.2 com.apple.driver.usb.AppleUSBHostPacketFilter 1.0 com.apple.iokit.IOUSBFamily 900.4.2 com.apple.driver.AppleEFINVRAM 2.1 com.apple.driver.AppleEFIRuntime 2.1 com.apple.driver.AppleUSBHostMergeProperties 1.2 com.apple.driver.AppleBacklightExpert 1.1.0 com.apple.iokit.IONDRVSupport 530.51 com.apple.iokit.IOGraphicsFamily 530.60 com.apple.iokit.IOSMBusFamily 1.1 com.apple.iokit.IOHIDFamily 2.0.0 com.apple.security.quarantine 3 com.apple.security.sandbox 300.0 com.apple.kext.AppleMatch 1.0.0d1 com.apple.driver.DiskImages 493.0.0 com.apple.driver.AppleFDEKeyStore 28.30 com.apple.driver.AppleEffaceableStorage 1.0 com.apple.driver.AppleKeyStore 2 com.apple.driver.AppleUSBTDM 456.250.6 com.apple.driver.AppleMobileFileIntegrity 1.0.5 com.apple.iokit.IOUSBMassStorageDriver 145.200.2 com.apple.iokit.IOSCSIBlockCommandsDevice 408.250.3 com.apple.iokit.IOSCSIArchitectureModelFamily 408.250.3 com.apple.iokit.IOStorageFamily 2.1 com.apple.kext.CoreTrust 1 com.apple.driver.AppleCredentialManager 1.0 com.apple.driver.KernelRelayHost 1 com.apple.iokit.IOUSBHostFamily 1.2 com.apple.driver.usb.AppleUSBCommon 1.0 com.apple.driver.AppleBusPowerController 1.0 com.apple.driver.AppleSEPManager 1.0.1 com.apple.driver.IOSlaveProcessor 1 com.apple.iokit.IOReportFamily 47 com.apple.iokit.IOTimeSyncFamily 740.2 com.apple.iokit.IONetworkingFamily 3.4 com.apple.driver.AppleACPIPlatform 6.1 com.apple.driver.AppleSMC 3.1.9 com.apple.iokit.IOPCIFamily 2.9 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.pthread 1 com.apple.kec.Libm 1 com.apple.kec.corecrypto 1.0 EOF Model: iMac14,2, BootROM, 4 processors, Intel Core i7, 3.49 GHz, 16 GB, SMC 2.15f7 Graphics: Radeon RX 560, Radeon RX 560, spdisplays_pcie_device, 4 GB Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1866 MHz, Crucial Technology, BLT8G3D1869DT1TX0. Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1866 MHz, Crucial Technology, BLT8G3D1869DT1TX0. AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 ( AirPortDriverBrcmNIC-1305.8) Bluetooth: Version 6.0.11f4, 3 services, 27 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 PCI Card: Intel HD Graphics 4600, VGA-Compatible Controller, PCI Slot 3 PCI Card: Intel Corporation, Series Chipset MEI Controller, IMEI Controller, Built In PCI Card: Intel Corporation, Series Chipset USB xHCI Host Controller, USB Controller, Built In PCI Card: Intel I217V PCI Express Gigabit Ethernet, Ethernet Controller, Built In PCI Card: Radeon RX 560, Display Controller, PCI Slot 0 PCI Card: Apple HDMI Audio Controller, HDMI Controller, Built In PCI Card: Intel Corporation, Series Chipset SATA Controller, AHCI Controller, Built In PCI Card: Apple SATA Controller, SATA Controller, Built In PCI Card: Broadcom BCM43xx Wireless Network Adapter, AirPort Extreme, Built In Serial ATA Device: Samsung SSD 840 EVO 250GB, 250.06 GB Serial ATA Device: ST2000DM001-1CH164, 2 TB USB Device: USB 3.0 Bus USB Device: Hub USB Device: Hub USB Device: Hub USB Device: Hub USB Device: Scarlett 2i2 USB USB Device: BRCM20702 Hub USB Device: Bluetooth USB Host Controller USB Device: USB Receiver Thunderbolt Bus:

    Help needed with DSDT

    @MaLd0n.Thank for your time and interest to help me I will add it to my bios and let you know thank again Best regards Baldy
  14. ctamy

    Sapphire RX 550 4GB DeviceID 0x699F Work In Mojave 10.14.3

    Hello, Could you please explain how you made this card work, I've actually tried modifying Clover by injecting a Fake ID, Lilu + Whatevergreen, and nothing works. According to the images you post and you included some modification in the DSDT so that the card would work, Thanks for your help.
  15. Alpha22

    Hackintool v2.3.5

  16. Hi @fabiosun you have this conversation with Pike two years ago. https://github.com/Piker-Alpha/ssdtPRGen.sh/issues/261 "Pike, Is it available a reboot fix patch for Sierra (GM) as the one you created for El Capitan 10.11.6? Many people uses boot strap patch or idle patch that inhibit XCPM start..." Could this be an option for bootstrap?
  17. No! I removed SSDT "CpuPm" from ACPI patched. And Used FakeCPUID 0x0506E4 and PMhart:s _xcpm_pkg_scope_msrs_ and unchecked SSDT and SSDT-1 in drop tables We have a working rig with FV and PM with PMhart:s _xcpm_pkg_scope_msrs_ patch together with FakeCPUID 0x0506E4.
  18. Something changed, how's your frequencies?
  19. Yes, you may have screwed your Atheros driver when you "tried a lot of Kext" as stated in post #1. Don't do anything next time, the card works with full native kexts. Nothing to do but the DSDT patch (or Clover property injection) to inject the compatibility statement.
  20. Hi all, Can anyone point me in the right direction on how to disable specific PCIe slots, maybe via a SSDT or DSDT patch? The reason for this is because of the problem I'm facing outlined in this thread: I want to disable the PCIe slot my Windows NVMe drive (non-M.2)is plugged into because it is causing the GPU to fail to initialize. Unless anyone has another idea? Specs and info in the linked thread. Thanks in advance. Cheers
  21. C.Frio

    [pre-release] macOS Mojave 10.14.5

    hi... to me the @chris1111 "the old patch Nvidia..." worked ok on a g210 on a 10.14.5 b2 but did not can make the update with it to b3 ...would be great an app that can uninstall the patch restoring to previous mode..so you could update to the new beta, than apply the patch again.. c.frio
  22. Your only solution is to: make the HDD with Clover/macOS your default boot disk set whatever partition you want as your default boot for Clover if you're in macOS and need to remotely reboot Windows, simply mount your EFI folder and modify your Clover config to boot the Windows partition if you're in Windows and need to remotely reboot macOS, mount the EFI partition and manually modify your Clover config file to change the default partition to your macOS partition https://www.insanelymac.com/forum/topic/311820-guide-mount-and-access-efi-partition-on-windows-10/ The Clover config is a text file after all.
  23. could you post a terminal output to see all data? could you post a terminal output to see all data? I mean in a working condition!
  24. Ok. I renamed my two SSDT to SSDT.aml and SSDT-1.aml. Cleared NVRAM and tried with and without plugin checked and still no progress. It seems that FV and PM consecuentely not loading at all when using bootstrap. When using PMhart _xcpm_pkg_scope_msrs_ everything seems to work fine. Why?
  25. Disclaimer: This post was originally formatted for speak-not-the-name. I have read over it several times to scrub anything related to those-who-should-not-be-mentioned, but I am sorry in advance if I have missed any. I understand the rules of this forum, and I am trying to comply as best as possible. Hey folks! Hopefully I am posting in the proper place, but let me know if not. I have a build from early 2012 that I have maintained and added to over the years. Every so often, I decide it's time to update the OS and potentially the hardware, but it always feels like I am starting from scratch. My goals at this point are to update the hardware and bring the BIOS up to its latest version (UEFI) to use Clover-UEFI for smoother OS updates.TL;DR at the bottom. Current Specs:GIGABYTE GA-Z68MA-D2H-B3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard (F9)http://www.newegg.com/Product/Product.aspx?Item=N82E16813128495Intel Core i3-2125 Sandy Bridge 3.3GHz LGA 1155 65W Dual-Core Desktop Processor Intel HD Graphics 2000https://www.newegg.com/Product/Product.aspx?Item=N82E16819115093NVIDIA GeForce GTX 1050 2GBhttps://www.nvidia.com/en-us/geforce/products/10series/geforce-gtx-1050/CORSAIR XMS3 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333http://www.newegg.com/Product/Product.aspx?Item=N82E16820145315Corsaid CX-M Series 650W PSUhttps://www.bestbuy.com/site/corsair-cx-m-series-650w-atx12v-2-4-eps12v-2-92-80-plus-bronze-modular-power-supply-matte-black/5845214.p?skuId=5845214Seagate Desktop HDD ST1000DM003 1TB 64MB Cache SATA 6.0Gb/s 3.5"https://www.newegg.com/Product/Product.aspx?Item=N82E16822148840Thermaltake V3 Black Edition VL80001W2Z Black SECC / Plastic ATX Mid Tower Computer Case Pioneer 24x DVDRW OEM1TB External Backup Drive (Backups via TimeMachine)Desired Hardware Upgrades:Processor ReplacementIntel Core i7-3770 Ivy Bridge Quad-Core 3.4GHz (3.9GHz Turbo) LGA 1155 77W CM8063701211600 Desktop Processor Intel HD Graphics 4000https://www.newegg.com/Product/Product.aspx?Item=9SIAJS392T0562&Description=LGA1155&cm_re=LGA1155-_-19-116-957-_-ProductRAM ReplacementG.SKILL Sniper Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) - Possibly 32 GB, give me feedback.https://www.newegg.com/Product/Product.aspx?Item=N82E16820231661&Description=ddr3 2133&cm_re=ddr3_2133-_-20-231-661-_-ProductAdd SSD to migrate OS and other apps toWD Blue 3D NAND 1TB Internal SSD - SATA III 6Gb/s 2.5"/7mm Solid State Drive - WDS100T2B0Ahttps://www.newegg.com/Product/Product.aspx?Item=N82E16820250088I want to speed this rig up significantly and keep it viable regarding hardware for a few more years at least. I don't do any major processing with this rig other than some gaming, but I would like the potential to be able to stream or produce video content. If you see areas that are excessive, let me know. I'm looking for feedback.Problems:The sequence of upgrades is significant I think, and this is where I'm really looking for input. RAM looks like it could happen at any point, so I won't worry about when I upgrade it unless I hear otherwise.I know the processor upgrade requires (F10) of the firmware for the MOBO (Sandy-Bridge -> Ivy-Bridge). I am assuming it means (F10) or higher, and I hope so since I plan to go one step further to the U1C(UEFI BIOS) version. This leads to one of my biggest questions: Will I break my legacy boot process when I move to the UEFI BIOS? In my head, yes, this breaks the boot process until I correct the settings in the UEFI setup, but in my head it is still broken because the UEFI setup is looking for something other than a MBR which I assume I am using since I am on a BIOS version of MOBO firmware and using Clover-Legacy.For the SSD addition, I imagine myself installing the drive, running a recovery disc or partition, and restoring the system from TimeMachine backup to the SSD. Any gotchas here that I am missing? Do I need to reinstall Clover at this point or have an alternative way to boot into the system?It looks like I could knock out the RAM and SSD at the same time with little to worry about. The processor requires a firmware upgrade to the MOBO, and I want to do it last since I am aiming for a UEFI version of the firmware to support Clover-UEFI.Clover-UEFI:There are plenty of guides on how to implement this, so I am just looking for some clarification: having UEFI firmware and using Clover-UEFI will enable me to run OS updates from the App Store with no major problems, right? Aside from reparing audio and reinstalling NVIDIA drivers (btw, NVIDIA drivers for Mojave when?!), the updates will be relatively smooth is what my understanding is.TL;DRI plan to make major hardware updates and get on a path to smooth OS updates via the app store. Here is the plan in my head: Install SSD and restore system from backup. Will I need to reinstall Clover or another tool to boot into my system? Install RAM. 32GB vs 16GB, I want viable hardware requirements met for a few to several more years. Also, I'm upping speeds from 1333 to 2133, any concerns here? MOBO supports it. Update MOBO Firmware to UC1. Will I break my legacy boot process when I move to the UEFI BIOS? What steps do I need to take to repair booting assuming it breaks? Am I better off treating things as a fresh install from Snow Leopard and restoring from backup? Install new Processor. Is this new CPU enough to manage some video editing? With all of these hardware changes, do I need to worry about DSDT's or other Kexts that got my system off the ground? Thanks in advance!
  26. I do everything mentioned in your post, but its still not working... I think to reinstall the system and try it once more.
  1. Load more activity
  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up