it will be at TPB. Includes the PPF1, PPF2 patches and adds more features to the
installer; all Apple Software Updates till april 2008, a few more drivers and some utilities.

-X11
-X11 update 2006 1.1.3
-Airport Utility update 5.2.1
-Compatibility update for QuickTime 7.2
-Java for MACOSX 10.4 release 6
-Safari 3.1 update
-iTunes 7.6.2 update
-Security update 2008-002
-QuickTime 7.4.5, AirPort Extreme update 2008-002
-GMA900_10.4.5 drivers
-BroadcomWiFi patch
-New Jmicron and Marvell ATA controller driver
-Realtek RTL8111/8187/8187B
-SSE2 DVD player patch
-Generic AC97 Audio driver
-Radeon 7500 patch
-SpeedStep.app
-Little Snitch
-Sowndflower
-Perian
-SlimBatteryMonitor
-KextHelper

Installer Screenshot:

WHOA! Its finally here!

Many many thanks for the hard work! Downloading in progress

Great news! Can you provide md5 of the package so that we know we have the real uncorrupted stuff?

is included in the torrent

nice, keep seeding

Sorry guys; It seems my ISP is blocking my connection!.
Keep your downloads, I'll try to sort something out

edit:

Now is back. I dont know whats wrong but I dont think is just a coincidence...

I cant find in on TPB, it was in recent, But now its unavailable.

Great job once again BlackCH.

can u upload that "XxX 10.5.2 Install DVD" in your signature.

Now is there again; and in the demon as well



Not yet. Isnt any better that what is already out there (kalyway, etc)...I'll release a 10.5.3 or 10.5.4 probably.

Great rev2, only one thing in Software Update , this.

Yes, I know. The thing is that the Airport Utility update 5.2.1 and 5.3.1 has the same package ID and one of them would need to be repack in order to include both...
I dont think you can update to 5.3.1 without having the 5.2.1 first. I tryed and I got an error;

BlackCH, thank you very much,

I can confirm ATI 7500 patch, works very well..
I select just ATI 7500 patch and AGPgart light vertion.
And got my ati 7500 16 mb ready with QE enabled right after installation.
But i still have this system crash from time to time... it's just stop to respond and freez. Can't do anything.
Really have no idea what to do. In addition I install wi-fi 2200, last stable from developers. The one on DVD is kinda old. Could this be a problem? Also Adobe CS and MS Office 2008, is very slow to start. Toast Roxio 8 and 9, just buncoing and burn my CPU.. never managed it to start.

I have ThinkPad T30.
Pentium 4M 1,8 (SEE2 only), i select this option for SSE2.
512 Ram

I really sad it's crash sometimes. I live it overnight, and found it with frozen screensaver at the morning.

Jeah, its still buggy stable driver Take Toast 7, its working and its UB.Yes, you need the 5.2.1 for 5.3.1.But the USB Driver Install Bug is still there, I have to install it again after install to get USB to work. USB Driver from 10.4.10 works, but the 10.4.11 one gets Symbol Errors on loading.

I also checked the USB driver package; I couldnt find anything wrong with it....
maybe you want to replace the one that works for U inside the ISO....
You can also send it to me; but I'll have a very busy time till the end on the month, so I cannot ashure I would be able to work something out.

Glad to hear the 7500 pack is working! I wasnt shure it would...

BlackCH,

Yes 7500 works well, I will insert booting screenshot.
I want to test other options with other KERNEL.. I used 8.9.1 KERNEL for now. I've seen post about succes 8.11.1 on SSE2 (northwood).
Could you please give me some clue for start.. what options would be a choice.


"If you want to give a try to the 8.11.1 kernel then choose the 8.11.1 no-EFI kernel instead of the 8.9.1 (deselect all 3 choices)... Probably you will need to boot with '-legacy' flag."

Something else? What about patches?

Thank you

-Apple 10.4.11 combo update (you can add all the updates from this menu)
-base combo SSE2
-8.11.1 kernel no-efi
-All recommended patches
-Graphic,sound,etc drivers for your pc

at boot you get a countdown, press any key and type:

-legacy (ENTER)

Thats your best shot (there a few more combinations that could work; I guess you can figure those out). If that doesnt work you will have to stick to the older kernel.

Some problem at TPB that is preventing me to download the .torrent file.

Thank you, i will try. Should I add something from "no-EFI kexts" section? Also should I select 10.4.5 logwindow?

Is working fine here. Did you tryed at the demon?



Every 'Base Combo' install many packages from the installer at once (so you dont have to select them). Read the documentation to see which ones. Make shure you have all no-efi kexts and you could add the loginwindow too.

hi folks,

I am new to this forum, I had a quick question

I installed 10.4.8 now looking to update 10.4.8, so can i go directly to 10.4.11 rev 2 by skipping the previous versions?

Thanks

It's not an updater, and it doesn't require any previous version. So, yes, you can simply install 10.4.11. You can even install to another partition and have both 10.4.11 and 10.4.8 on the same disk, which is what I do while evaluating new releases.

thanks for the reply

i d/l 10.4.8 which is 4.3GB in size , but this new install is just 2.5GB in size, any differences?

First, the ISO is compressed with RAR. Uncompressed it's actually about 3.1GB. Second, there are some uneeded drivers and fonts that have been removed. So it's has been cut down with stuff that most users will never miss. And at the same time it has many, many drivers and additional programs that make it work better for mere PC users. And we don't have to go hunt them down and download them separately.

So basically it's smaller, better, and customized for us. This has been the best release that I have has the pleasure to use.

tried to install XXX 10.4.11 last night - but I am unsuccessful on my Acer 5315 -

put the dvd into the drive and restarted the system, it started installation and halfway my system shutdowns randomly.

I am not sure what the problem is.

at last tried to install with JaS 10.4.8 , same problem halfway installation is fine -and shutdown middle way.

No success with the 10.4.11, 10.4.8

I am using Intel celeron M 550 @ghz processor and Intel x3100 graphic card
any help

Use Uphuck 10.4.9

i will try mate

some other member is having the similar problem i am facing

http://forum.insanelymac.com/index.php?showtopic=75578

tried to install XXX 10.4.11 this weekend ,but I am unsuccessful
my notebook:
CPU:Intel Celeron M 520 (1.5 GHz)
MainBoard:Intel 945GM
MEM:533Mhz DDR 1536MB
GFX:Intel G950
LAN:broadcom 440X

Could you please give me some clue for install..
Thank you

Installed 10.4.11 with 10.4.8 Universal Kernel AOK.

Had been trying to use the 10.4.11 kernel for ages now, seems like one obstacle after another. So I used the 10.4.8 universal kernel, almost problem free.

These are the ioptions I used:
10.4.11 updates -all
10.4.8 universal kernel (all 3 options)
all recommended kexts (I left out CPUPowerManagement kext remover as I have HPET)
all no-efi kexts
ATI 7500 Pack
AGPGart1.1
chun_nan IOPCI kext

I can also confirm that the ATI 7500 pack works very well (other versions I found before had been modified so they dont work without tweaking). If I install to 10.4.8 with ATI 7500 pack, QE enables from the start.
If I Install to 10.4.11 with 10.4.8 unversal kernel, minor tweaks needed (ethernet, sound & AGP werent working) specifically:

1)switched IONetworkingFamily.kext, AppleHDA.kext & appleAC97 with the older versions -taken from a JaS 10.4.8 ppf1 & ppf2 dvd.
2)edit the Info.plist inside AGPGart.kext to show your IONameMatch vendor & device ID's. for my T42 that was
<string>pci8086,3341</string>. That is for a ATI Radeon Mobility 7500 32Mb M7 LW card.




Maybe i'm missing something but I now have a quite flexible multimedia setup which I what I was aiming at.

my only problems now, cant use QE output in vlc player. DVD player plays but shows blank screen, vlc player can play them but drops 2 out of 3 frames. USBUHCI debug driver registered, have had that on every install Ive tried I think, cant seem to get around it, USBEHCI is fine.

I was always really impressed by this dvd, now I know to use the 10.4.8 kernel it installs even easier than the JaS dvd.


Many thanks BlackCH, I am now happy enough to stop endlessly tweaking.

BlackCH:

Installed bluetooth with no problem ( working).

But, i dont have any option to turn it OFF in System Profiler. There is no option for me to click the "Turn Off".

How could i fix this?

I tried TPB today and couldn't find it.

BlackCH
On the DVD is Classic for Intel, but its not in Installer, why?

It didnt work. I left it there in case I find a solution, but I havent look to it yet

Hi on i am a noob at all this i have tried findong the download but i can't find it
My system is:
Dual Core 1.8
Biostar 7050 nvdia motherboard
and chipset
140 gig hdd
2 gig ramm

Will this work on this spec and can anyone help me with
where and how to find it.
i have trued to find it so many times and just fails and also
will this work on a 20 gig hdd as i don't want to lose all my work on my 140.

Well,
Congrats to anyone with success installs.

Attempt #1.
I tried to install on Acer Aspire AMD T180-X42.
1x WD250 PATA IDE - 4 partitions (Vista/XP/Partition For OSX and 1xFAT32)
1x Hitachi HT250 SATA - 4 Partitions (3x NTFS partitions and 1 FAT32)
Upon boot the XxX 10.4.11 displays continuous wild text as "UNKNOWN SIGSEGV Code 0" until I power off the system.

Attempt #2.
I love to have this 10.4.11 for it's Brushed Metal GUI - then I made some attempts to another PC C2Q6600 [3 Hdd = 10 partitions Vista/XP/+user files at other partitions but this time it displays "waiting for root device".

Attempt #3.
I end-up installing Leo4Allv3 then erase because it does not display on my old 15" Samsung LCD.

Attempt #4.
I burn again this 10.4.11 with 4x speed - no luck - same "SIGSEVG ... " thingy. Lastly I opted to install Kalyway 10.5.2 and works perfectly on Abit IP35E.

I really love to have this 10.4.11 Tiger to work on any of the above machine Intel/AMD and I would like members to advise me for the two error messages above as where do I go wrong.

Please, Thank You.

I AM NEW ON THIS ,I DOWNLOADED THE XXX 10.4.11 TORRENT INSTALL REV 2.0 BUT I FIND MANY FILES NAMED FROM 1 TO 23 WHTA I HAVE TO DO TO CREATE A INSTALL DVD
SORRY FOR THAT SIMPLE QUESTION

This disc is INTEL only. And the 2nd computer you tryed probably has an unsupported HD/IDE controller.

please keep seeding, i have 0 seeds...

thanks for the release!!!

HELP!!!

After mixed results with a Leopard install I've decided to re-install the 10.4.11, the problem is I can't remember for the life of me (after many attempts) which kext, kernel and EFI to select, help is appreciated

My motherboard is a Gigabyte GA-945GCMX-S2 (for this I select ICH7, RLT8110, ALC888 and GMA950) and my processor is an Intel E6600 Core 2 Duo.

Thanks in advance.

Get the lastest revision (2.0). Try:
SSE3 EFI or SSE3 EFI vanilla (MBR/GUID, depending on your hd scheme)
from the 'Base Install Combos' menu.

on top of this add:
GMA950
ALC888 (3 or 6 ports)
RTL 1000 (maybe)
ICH7 is supported out of the box

I see that there is 8 series driver/injector included in the install disc. I am just wondering does that mean cards like 8800GT would work with 10.4.11?

Many thanks for answering this question.

where can i download the torrent? Can anyone give the link? Thanks!

where can i download the torrent? Can anyone give the link? Thanks!

the bay where the pirates go..

i've just installed the 10.4.11 rev2
Thanks BlackCH .. everything is working fine
Except for the sound and video problems..I think this is connected to the Speedstep in which makes my cpu underclocked from normal..
Do you have any ideas or anyone can help me with this?
p.s Even the clock is tickling slower than normally

Just downloaded this and going to take the plunge and install it tonight on my DELL Inspiron 6400 (Intel wifi, sigmatel audio, broadcom 10/100, GMA945). What base install would you guys recommend?

tested it and it all worked fine, thanks this has to be the ultimate tiger release ever. Downside.. you really have to know what you're doing ( the complexity is amazing )
Thanks

I know this is kind of old... But I need it.. Can't use OSX 10.5 with Pro Tools 7.5, need 10.4: Can't load projects recorded on HD systems if you use 10.5. I've GOT to have 10.4 any version...

Actually I also need a 10.3... Cos my other Digi 001 will only work upto Pro Tools 6.4 which will nto work under 10.4 even

This is no longer on TPB or EmonDoid... Anyone got it that can seed it for me?

(edit.. never mind, I found this finally)

(Edit, I gave up on that "uphuck" version)

I've gotten this version here to install and even boot, but when LoginWindow starts, I get:

localhost mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on interfaceID 01807C00 lo04 to 224

Its good release i have try!!
Thanks BlackCH
Still Waiting for New xXx Leopard 10.5.3

Thx

This install worked really well after I figured out which kernel to use. For some reason the 8.11.1 would always cause my system to hang with an Unresolved Kernel Trap on boot. I'm not sure why that is since that kernel is suppose to work with the Core 2 Duo.

The only other weirdness I noticed is that the About This Mac section displays the wrong speed. I'm showing as a 3.8 Core 2 Duo right now when it should be 3.12. I have added the proper fsb flags to com.apple.Boot.plist but that did not solve the problem. When I was running an older xxx 10.4.10 disc the About section displayed the correct speed.

One other unsolved problem is that running Logic Studio 7 or 8 shows both cores of the cpu but will only load one core and activity monitor is showing only 48% of my total cpu used. This has been a problem for me on my 10.4.10 AMD, 10.4.10 Intel, and now my 10.4.11 Intel. Any clue why Logic is the only program not using both cores? I never have an issue with Ableton or Cubase using the cpu.

10.4.11 might be the perfect system for the msi wind (or the akoya clone in my case) but I couldn't install it. The install DVD won't boot from an external DVD drive connected to the akoya and if I boot from it on my desktop PC, install the system on an external USB drive, connect this drive to the akoya and boot from it (this method works with kalyway 10.5.2 installs as the chipsets on the desktop and the wind are similar) it ends up in an error reporting trouble with AppleACPICPU.