There are no KPs yet. I ve done a few scans and a few attempts to attach. I could not figure from the logs what networks it found and what the numbers are associated with those networks. But I randomly tried to attach to 1, 2, 3, 4 .. did not know what to expect after I tried to attach to network (option 3 in network selector). I believe someone already offered this, but I can definitely give VNC access to J.

to finish the driver i'll have to test code related with ieee80211_authenticate and outputpacket
this code gives kernel panics - no way to use vnc to connect to another computer

try this - fix for scan reinit

iwi3945 rel 1169
iwi4965 rel 1170

iwi3945 rel 1169

first reboot --> hangs on blue screen (I guess, the screen was blue for 5 minutes then I did a hard reset)
second time booted with -v --> no freezes

then I did a scan --> did found my wireless AP with mac adress

Jun 8 23:33:28 thomas-godons-mac-pro kernel[0]: 1) 00:13:f7:35:a9:e2 ('Boven') cap 421 hw 3 ch 6\

Then I tried to connect to unsecured network

Sorry for the lame question, I'm new in the hole OSX86… I have dell e1505 with 3495ABG. I tried to install the driver but even after the REBOOT I haven't any new network driver and the network selector doesn't even let me the selection menu.
I'm using kalyway 10.5.2.
Can some help me and tell me what am I'm doing wrong?
10x

It's a new installion. I installed the Kalyway and than the driver? do I need to install something else first?

Hello! I tested the iwi3945 rel 1169 and it gives some result! It scans and shows up my network. After this i don't know, what should be doing.

Here is my Logfile:

Javi, i have some free time for this, so if i can help, just write it here what i have to do!

Sandiel

OK, iwi4965 rev 1170 logs, no KP this time, everything boots and runs fine. Kernel doesnt recognize new ethernet device, but iwi4965 starts scanning and does recognize my network, the only one in range. It will not let me connect, i dont think, i have no way of telling, This is only a small section of the logs. The whole thing is 10+ MB. It seems to be stuck in an infinite loop scanning, so the logs just repeating. Cut it down for size issues. Thanks for the great work J. Look forward to next rev.

First, logs from 4965 r1170. Second, logs i did yesterday with r1160 which show really odd activity.. i'm still seeing this sometimes, looking for info so i can work out a fix and contribute.

I'm still getting the issue with networkSelector not seeing the card, but i don't have the osx experience to properly troubleshoot it myself.

I do have some Unix/linux ability, and can code a bit.. please direct me jalavoui

so does 4965agn work yet?

short answer: no.

the devs are doing a great job. looks like it won't be too long now.

how longs not too long weeks months or years?

OK, i'm at the same step as before, only now the kernel is recognizing the interface. For some reason it is trying to assign it the same address (i.e. en1) as the wired adapter. How can I change it, i know that it is finding it because in my current logs it gives me the
deal, so it is detected. But I cannot for the life of me figure out how to change the address in 10.5.2. The wired adapter is en0, i need to set iwi4965 to en1 somehow. What do I need to do?
[rant] And btw cheeseboy, shut your mouth. If you want the driver to progress faster maybe consider HMMM I DONT KNOW, HELPING!! Seriously at least post a log, a KP pic, anything to help J out, he's been workin on this for almost 2 years and has gotten nothing from it. I mean honestly I understand wanting it to be done, I want it finished to, but I try to help. [/end rant]

i didnt mean it to be offensive just don't know how long this kind of thing takes

It's honestly hard to say. Could be weeks, could be more. Your best bet is probably to lurk in this thread or help with testing.

Tested build 1170 haven't noticed any changes over the last builds. Some interesting errors at the beginning of the log.

Click to view attachment

Can a mod please, for the love of god - and this thread - clean up 222222's post? it's HUGE .

Thanks,

M.

Jun 9 12:05:57 localhost kernel[0]: USBF: 138.787 AppleUSBEHCI[0x26a6800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfa, timing out! (Addr: 0, EP: 0)

To install a new iwi3945 drive must I uninstall the previus ( If yes how ? )

(sorry for the bad english I'm from greece)

Just delete the iwi3945.kext out of the extensions folder

greez

Marcy

thanq Marcy Darcy

1170 log

i am a developer with the card. which functions should i look into?

My Log.
i have reinstalled Leopard to give you an hand guys.

Jun 9 12:34:38 massy-massys-mac-pro kernel[0]: 1) 02:05:b4:04:d1:68 ('Rete wireless Massy') cap 431 hw 3 ch 6 WOW he find the only network around
i try to connect disabling the Protectio. i will post a log soon.

the associate code is in configureConnection()

It doesn't work for me ..

It can't find networks

code for associate atempt - might get a kp

iwi3945 rel 1171
iwi4965 rel 1172

read back to learn howto test

iwi3945 rel 1171

option 2 --> he finds my wireless network
when i tried option 3 --> KP

iwi4965 r1172 - no ap currently set up to test connection. Will set one up tomorrow morning, but it's just past midnight here for me..

still can't tell if networkselector is correctly detecting my card. Scanning is giving some output though.

Hi.

iwi3945 rel 1171:

Click to view attachmentI make my wireless network unprotected, but "spaceport" didn't show me any network. I tried to type network number 1 and connect, but nothing.

UPD:
I was trying to play with wi-fi hardware switcher and descovered that driver printed founded networks in the System.log. I thought that founded networks must typing directly in spaceport. I attached one more log. "Internet" - is my unprotected network.
Click to view attachment

the same ....can find...but when chose 3.......it crash..

(3945) Hi! It didn't find anithing on scan, and on option 3 it gives kernel panic!Here is my log!SandielI think, it gives timeout, how can i fix this?

this version is more user friendly
the net list should show in networkselector
i'm not shore if this code is ok - post the output of networkselector
kp expected if try to associate

iwi3945 rel 1174
iwi4965 rel 1176

pere,
can you try to find where is the kp?

it is more friendly.....but..around me there is no ap....so it can't find one....
my poor english......hope you can understand

1) Turn card on/off
2) Start scan
5) Close Program
0) Refresh

Enter Option: 2

etworks found:
Segmentation fault
logout

[Proces voltooid]


Same problem as i had with scanning when it was still in log. Sometimes it doesnt show correctly... Gonna reboot now.

EDIT: Stays the same after reboot

ns code is wrong
trying to fix...

iwi3945 rel 1178
iwi4965 rel 1180

need faster logs for networkselector

i find somme wireless network in vista...but i can't find it in ieopard.......i will give you my log but i think it likes the one i have upload

what do you mean by "faster logs"... i've got a mac pro and an hp with 10.5.2 and a 3945 sitting here and will gladly follow your instructions exactly as you need. I'm at your call. Do you have an instant messenger client that may speed the process?

my log

Sorry Javalui, im now working with the laptop and cant test... but im here watching advances.

here's my log, kext and networkselector for 4965 rel 1180.
it did not find any network (vista seen about 4 including mine) repeating the scan (option 2) it hangs the whole pc without kp.
Repeated the test after a reboot with the same results.

Also had Freeze.. Tried 2 times

Last log line:
U iwl4965_rx_scan_start_notif Scan Start: 136 [802.11a] (TSF: 0x....

I couldn't see the rest because network selector was in front of it. :/

(3945) Here is my log, from last release! It can't find everything, it gives timeout! Last when it find my network was yesterday, 2 releases before!

Here is my log!

Sandiel

networkselector crashes when i try to scan

here are my logs en the crash report (don't know if you can use it)

should work ok now

iwi3945 rel 1182
iwi4965 rel 1184

KP when trying to associate

yup KP

iwi3945 rel 1182

i use the iwi4965 rel 1184 in the network selector, i select start scan,work but i select the ssid, i give kernel panic.
i don't have logs, but can help the information

it can find one time..when i chose 3..it crash...after reboot..
it can't find anything

iwi4965 r1184 - networks detected!

Lockup when attempting to connect. Looking good though

it can find the network.but can't chose 3

Hey,

I've found a SourceCode of the "Intel® PRO/Wireless 3945ABG"

Inside this TGZ-File is a directory "iwlwifi-1.0.0-1" there in the folder "origin" is the SourceCode written in - I think C

Here are this and other Versions:

3945ABG (DriverVersion: 1.0) -- iwlwifi-1.0.0-1.tgz
http://downloadcenter.intel.com/Detail_Des...x*&lang=eng

4965agn (DriverVersion: 1.0) -- iwlwifi-1.0.0-1.tgz
http://downloadcenter.intel.com/Detail_Des...x*&lang=eng

2200bg/2915bg (DriverVersion: 1.2) -- ipw2200_linux_1_2_0.tgz
http://downloadcenter.intel.com/Detail_Des...x*&lang=eng

2100 (DriverVersion: 1.2) -- ipw2100_linux_1_2_0.tgz
http://downloadcenter.intel.com/Detail_Des...x*&lang=eng

I hope I could help you ...
If you already have this Source, sorry for this post

I've just addet this Drivers here for Downloading ...

It seems like the Source is only in the 3945-Version
But look in the other Files also ...

If you already have a version pleace tell me how to install ...
The tutorial of the mainpage is too komplex for me ...

-> I'm sorry for my english, but I hope you could understand me