815 safe boot manual load logs... really very hard to initialize correctly the card, when the card boots ok, then i have the picture from my 813 post.

Going to test 816.

816 logs. I've been getting great logs all day, not this time. Lots of initialization lines missing that were there last build..

Click to view attachment

815 started like this:

Apr 24 11:45:21 Sony kernel[0]: iwi3945: StartingApr 24 11:45:21 Sony kernel[0]: Someone called createOutputQueue()Apr 24 11:45:21 Sony kernel[0]: settCurController [OK]Apr 24 11:45:21 Sony kernel[0]: IOPCCard info: iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23dApr 24 11:45:21 Sony kernel[0]: IOPCCard info: iwl3945: Copyright© 2003-2007 Intel CorporationApr 24 11:45:21 Sony kernel[0]: ieee80211_alloc_hw @ /Users/super/Desktop/iwi3945/815/compatibility.cpp:5592Apr 24 11:45:21 Sony kernel[0]: sta_info_init @ /Users/super/Desktop/iwi3945/815/compatibility.cpp:5424Apr 24 11:45:21 Sony kernel[0]: init_timer @ /Users/super/Desktop/iwi3945/815/compatibility.cpp:886Apr 24 11:45:21 Sony kernel[0]: ieee80211_if_sdata_init @ /Users/super/Desktop/iwi3945/815/compatibility.cpp:2088Apr 24 11:45:21 Sony kernel[0]: ieee80211_alloc_hw [OK]Apr 24 11:45:21 Sony kernel[0]: iwl3945: U iwl3945_pci_probe pci_resource_len = 0x00000008Apr 24 11:45:21 Sony kernel[0]: iwl3945: U iwl3945_pci_probe pci_resource_base = 0x34f02000Apr 24 11:45:21 Sony kernel[0]: IOPCCard info: iwl3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionApr 24 11:45:21 Sony kernel[0]: iwl3945: U iwl3945_set_rxon_channel Staging channel set to 6 [3]Apr 24 11:45:21 Sony kernel[0]: init_waitqueue_head stubbed out!Apr 24 11:45:21 Sony kernel[0]: iwl3945: U iwl3945_pci_probe MAC address: 00:19:d2:ac:3c:fa

But 816 is like this:


Apr 24 12:13:26 Sony sudo[183]: super : TTY=ttys000 ; PWD=/Users/super/Desktop/iwi3945/816/build/Debug ; USER=root ; COMMAND=/sbin/kextload -t iwi3945.kextApr 24 12:13:31 Sony kernel[0]: ete()!Apr 24 12:13:31 Sony kernel[0]: BUG!ieee80211_tx_status @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:1881Apr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_rx_handle r = 4, i = 3, REPLY_ERROR, 0x02Apr 24 12:13:31 Sony kernel[0]: error iwl3945: Error Reply type 0x00000000 cmd UNKNOWN (0xD0) seq 0x0044 ser 0x000000D0Apr 24 12:13:31 Sony kernel[0]: test_function @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:6520Apr 24 12:13:31 Sony kernel[0]: iwl3945: U __iwl3945_down iwl3945 is going downApr 24 12:13:31 Sony kernel[0]: ieee80211_stop_queues @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:2070Apr 24 12:13:31 Sony kernel[0]: ieee80211_stop_queue @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:1869Apr 24 12:13:31: --- last message repeated 3 times ---Apr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Wait REPLY_BT_CONFIG Condition: 49ms leftApr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Command REPLY_BT_CONFIG failed: FW ErrorApr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 44Apr 24 12:13:31 Sony kernel[0]: iwl3945: U is_temp_calib_needed Same temp,Apr 24 12:13:31 Sony kernel[0]: iwl3945: U is_temp_calib_needed Timed thermal calib not neededApr 24 12:13:31 Sony kernel[0]: queue_te @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:6531Apr 24 12:13:31 Sony kernel[0]: timei 6000 timei2 2132750073Apr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_alive_start ALIVE processing complete.Apr 24 12:13:31 Sony kernel[0]: __ OUT iwl3945_alive_start __Apr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_mac_open Wait START_ALIVE Condition: 163ms leftApr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_mac_open leaveApr 24 12:13:31 Sony kernel[0]: ieee80211_hw_config @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:5168Apr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_mac_config enter to channel 1Apr 24 12:13:31 Sony kernel[0]: iwl3945: U iwl3945_mac_config leave - not readyApr 24 12:13:31 Sony kernel[0]: __ieee80211_if_config @ /Users/super/Desktop/iwi3945/816/compatibility.cpp:6299Apr 24 12:13:31 Sony kernel[0]: no netif_runningApr 24 12:13:31 Sony kernel[0]: 1st scan


816 kext:

Click to view attachment

looks like pere's card is the only one working

post the full logs please

logs from 816.... we are getting close to it

This is where the error come:

Pere's reply is 1 and mine (plcp 1)

Apr 24 18:31:42 kernel[0]: ifconfig going up
Apr 24 18:31:42 kernel[0]: outputPacket called by someone
Apr 24 18:31:42 kernel[0]: outputPaccket2 called
Apr 24 18:31:42 kernel[0]: tx pkt with net down
Apr 24 18:31:44 kernel[0]: (plcp 1)
Apr 24 18:31:44 kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 11 (plcp 3)
Apr 24 18:31:44 kernel[0]: iwl3945: U iwl3945_set_rate Set active_rate = fff, active_rate_basic = 153
Apr 24 18:31:44 kernel[0]: iwl3945: U iwl3945_commit_rxon Sending RXON
Apr 24 18:31:44 kernel[0]: * without RXON_FILTER_ASSOC_MSK
Apr 24 18:31:44 kernel[0]: * channel = 1
Apr 24 18:31:44 kernel[0]: * bssid = 00:00:00:00:00:00
Apr 24 18:31:44 kernel[0]: iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4
Apr 24 18:31:44 kernel[0]: iwl3945: U iwl3945_send_cmd_sync Wait REPLY_RXON Condition: 0ms left
Apr 24 18:31:44 kernel[0]: error iwl3945: Error sending REPLY_RXON: time out after 500ms.
Apr 24 18:31:44 kernel[0]: error iwl3945: Error setting new configuration (-60).

Here's another 816 log, this time with regular boot, then kextload. still missing init stuff at the beginning, but it does do some scan attempts.

Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_bg_request_scan Initiating indirect scan.
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 36 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 40 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 44 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 48 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 52 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 56 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 60 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 64 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 149 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 153 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 157 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 161 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan Scanning 165 [PASSIVE 110]
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_get_channels_for_scan total channels to scan 13
Apr 24 12:36:39 Sony kernel[0]: iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x440D, 366 bytes at 13[32]:4


Click to view attachment

to test 4965 we only have to get source from trunk & compile?

We have the correct version then?

mlazy,
good log - how do you did it?

The second one was from a full boot, not -x'ed. Is that the log you like? I wonder if some other kext is helping my results if that's the case?

Damn!!
Now is really easy to make it initialize, but i cant take a decent picture when it freezes on start up...
I see how all the iwi hardware is recognized, started, but only can take horrible pictures , i can try if you like.
When boots wrong, i get this log...

pere,
just write the last log lines before the kp

i think mlazy as found a important bug in scan
wait...

Two pictures from two differents Kp.

prer,
this is at driver starttup!
do you always get that at reboot?

iwi3945 rel 817
add debug to scan msg
hope you don't get kp

wohooo! my inits are back on 817:

Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init HW Revision ID = 0x2
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init Finished nic_set_pwr_src
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init ALM-MM type
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init SKU OP mode is basic
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init 3945ABG revision is 0xF1
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init Card M type B version is 0x2
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init SW RF KILL supported in EEPROM.
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_hw_nic_init HW RF KILL supported in EEPROM.
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_load_bsm Begin load bsm
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_verify_bsm Begin verify bsm
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U __iwl3945_up iwl3945 is coming up
Apr 24 13:09:00 Sony kernel[0]: iwl3945: U iwl3945_mac_open Start UP work.

Full boot logs:

Click to view attachment

going down for -x boot, brb.

Javalui! Now my card ALWAYS init correctly on reboot, just get frozen.
Pics attached.
Log from manual load.

EDIT: My kext too for 817

do we have to load the chun-nan kext every time or can we just install it once and thats it? (Im on lunch, I'll have 815rel in a bit

xboot is slightly different. what are these:

Apr 24 13:28:50 Sony sudo[143]: super : TTY=ttys000 ; PWD=/Volumes/Hackintosh/Users/super/Desktop/iwi3945/817/build/Debug ; USER=root ; COMMAND=/sbin/kextload -t iwi3945.kext
Apr 24 13:28:55 Sony kernel[0]: p 55)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 3 (plcp 110)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 4 (plcp 13)*
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 5 (plcp 15)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 6 (plcp 5)*
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 7 (plcp 7)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 8 (plcp 9)*
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 9 (plcp 11)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 10 (plcp 1)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Adding rate index 11 (plcp 3)
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_set_rate Set active_rate = fff, active_rate_basic = 153
Apr 24 13:28:55 Sony kernel[0]: iwl3945: U iwl3945_commit_rxon Sending RXON
Apr 24 13:28:55 Sony kernel[0]: * without RXON_FILTER_ASSOC_MSK
Apr 24 13:28:55 Sony kernel[0]: * channel = 1
Apr 24 13:28:55 Sony kernel[0]: * bssid = 00:00:00:00:00:00


Click to view attachment

Install just one time, it will do its job every reboot.

Doctadre, the Chun-nan stuff is a one time install. Make sure you back up the original kexts plz. Oh, and I had to boot with -v -f -x once to fush all of my caches etc. otherwise I would kp after the install (of chun-nan kexts) But, it immediately saw my TI cardbus after.







817 kext:Click to view attachment

pere,
do you always get a kp?
in your picture in don't see the last logs lines before kp. looks like you take the picture before the kp

mlazy,
your logs are full of bugs - what's wrong? just look at your logs for 806 v 807

Sorry fellas, to ask for some help. It didnt work for me, I get an error in the end talking about it cant find a file /volumes/untitled/fseventsd and then says boot timed out. I did back up the files, I guess I could try doing it again any ideas?

I'm not sure why I see more bugs than others. I have always gotten tons of errors in both -x and full boot modes when manually loading the kext. I assumed that after some of the init stuff got fixed a lot of it would subside. interesting that the ucode stuff has been loading for me finally in the last 5 releases or so. I just keep getting a microcode error when the scan process begins which blows everything up for me.

iwi3945 rel 818
trying to fix mlazy bugs

Im back.
The loading just stops there, get frozen, no KP.
At least, always loads fine on the very begining, is getting very very stable load.


Going to test 818

iwi3945 rel 819
fix for pere's bug


iwi4965
anyone to post logs?

818 logs;going to do 819 now.

Click to view attachment

Click to view attachment

819 logs:

looks much different; all my init info is missing, but the scanning setup looks new, more like pere's.

Click to view attachment

Wow!, have come back from 818, got manual load log, stuck on restart, going to try 819! XD

iwi3945 rel 820
easy to fix

Rel 819.. Still stuck on reboot... have take a pic with the HW swith turned off to see only how the card loads without trying to scan. going to test 820... you run sooooo much! XD

820 logs.... (just arrived home and I miss a few ones)

First error:

Apr 24 21:27:44 miguel-morillos-mac-pro kernel[0]: iwl3945: U iwl3945_rx_handle r = 3, i = 2, REPLY_ERROR, 0x02
Apr 24 21:27:44 miguel-morillos-mac-pro kernel[0]: error iwl3945: Error Reply type 0x00000000 cmd UNKNOWN (0x00)

Why is rx if the card is not still init ?




Apr 24 21:27:42 miguel-morillos-mac-pro kernel[0]: IOPCCard info: iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23d

Rel 820....
Freeze on manual load, no logs.
Still stuck on restart...
Javalui, i have a good feeling about this, you a very, very close.


Rel 820 attached.

820 logs:

Click to view attachment

The second line can't be good:

Apr 24 15:39:56 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Command REPLY_BT_CONFIG failed: FW Error

But anyway, have a look at the rest of the log.

anyone get good logs?

i'll start working on iwi4965 - might learn something usefull for iwi3945

iwi3945
you'll have to wait for iwi4965 results


iwi4965 rel 821
starting some hacks
there's no script in this - manual copy iwi4965.kext to extensions

Pere,

I don't get freeze at all....

... but also I'm not using the IOPCCARD rev8 kext ... it makes me lose laptop sleep...

But I'm going to give it a try.... to ensure it makes different... (not sure if better or worst)

Well im in for testing. the logs provide with the getlogs.command are that the correct ones that i need to upload then when testing?

From where can we get the source code for 4965?
ThnQ

REally good 820 logs:

Click to view attachment

Jalavoui creeps closer and closer.....

iwi4965 rel 822
forgot some hacks
to test get the source code from svn - read back to learn howto
maybe this make the driver work

I have just get SCAN_COMPLETED

Currently doing test with 820 and IOPCCARD to see if this kext helps to init the card...


I'll keep logs in a while

Miguel, remember, we are looking for SCAN_COMPLETE_NOTIFICATION !

iwi3945
there's no point in posting logs - the driver just don't work
unless you have coding skills to fix the driver don't post logs
let me work in iwi4965 - i need to check a few things them i'll get back to iwi3945

iwi4965
after install goto sys prefs - networks and click apply

Sorry I wont be able to help for the rest of the day, somehow the chan-nun kexts dont like my comp, I cant get osx to boot up again so I can restore the old files. When I get home I'll reinstall osx. Until tomorrow fellas. good luck

oke tested 822 iwi 4965, new interface detected as eth1

no kp, log is attached, ill download the getlogs.command now to get correct logs.

oke new logs attached. hope there good... the system. txt is a copy of some of the lines in the .log file, i cant upload the whole file because its 8 mb


ill restart now because the dmesg log is wrong..

Like this ???

Apr 24 21:59:18 Miguel kernel[0]: iwl3945: U iwl3945_bg_scan_completed SCAN complete scan
Apr 24 21:59:18 Miguel kernel[0]: ieee80211_scan_completed

Jalavoui.... We are triying to find why the card is not working in some and yes in others..,

I review the log before posting then.... looking for card init...

Sorry if so many logs bother you...

4965 logs...Click to view attachment I restarted one time

oke these are better 4965 logs i think

this are good logs - allways try to get like this because they have fisrt driver starttup lines
goto console -> system.log -> reload
copy/paste to a text file
zip if it's too big and post here

iwi4965 rel 823
nice driver to code
if i get few errors i think i can make this work today
let the driver run for 2/3 min and post logs

oke logs from getlogs.command after about 2 mins. rev 823 iwi 4965

jalavoui, are these of any good?

How about this logs on Revision 820 iwi3945 ?
This log is no so interesting Click to view attachment
This one ... hmm ... looks better than ever Click to view attachment
Cheers mate, so bad that i do not have the skills to help more.

rev 823 from 4965
Click to view attachment

Is this a good log?

the system.log is very short - missing lines?

ok is fine,
do you get SCAN_COMPLETE_NOTIFICATION in system.log? - try a search