Here are my logs...
I'm not positive but system.txt and 762log.rtf may have different information inside, otherwise they're identical.
Full Version: Intel Wireless 2100, 2200bg, 2915bg, 3945abg, 4965agn
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61
762 logs:
Boote with -x, Loaded the kext and got a decent log. Not sure what's new, but I started a scan with network selector at 20:57:35. Also hit the kill switch at 20:57:49. Any insights Jalavoui?
Click to view attachment
Doctadre: for netselector: after you start the driver, launch the app and type 2, then press enter. If you watch your logs,you should see "connect" which notes the scan firing off.
Boote with -x, Loaded the kext and got a decent log. Not sure what's new, but I started a scan with network selector at 20:57:35. Also hit the kill switch at 20:57:49. Any insights Jalavoui?
Click to view attachment
Doctadre: for netselector: after you start the driver, launch the app and type 2, then press enter. If you watch your logs,you should see "connect" which notes the scan firing off.
Here are two logs of mine using mlazy's 762 build.
log1: manula kextload, then start scan at "18:02:32" and switched off the card at "18:02:43"
log2: reboot, then manual kextload and scan.
log1: manula kextload, then start scan at "18:02:32" and switched off the card at "18:02:43"
log2: reboot, then manual kextload and scan.
Alright, i logged and started network selector. After looking at the logs, I think I may have a coupla ideas up my sleeve. May need to have mlazy or jalavoui define some of these functions I see here. its 11pm cst and im bone tired, to think I have 2 free days away from the hospital is quite settling. See yall in the morning, good luck if yall still working
Here are my logs for 762. Hope this can help.
my machine has got a 3945abg intel pro wirless card and i was wondering if any progres had been made yet and if there is now a working driver for leopard .
downloaded the DMG from the site, when i install all installs fine, then when i reboot locks with no logs !
any ideas what i should try (dell vostro 1700)
any ideas what i should try (dell vostro 1700)
iwi3945 wirless switch
the idea of the switch is to turn the card on(off
this is very hard to do by software and can be the only way to turn the card on/off
what i need to know:
- you press the switch and the card goes off - ok
- now if you press it again the card is supposed to turn on and star working
if this doesn't happen them something is wrong in code and i have to fix it
deam!
ieee80211_init_scan functions are for passive scan - TNW is this your code?
iwi3945 doesn't support it
the driver is full of bad code
i'll fix it and post to svn
the idea of the switch is to turn the card on(off
this is very hard to do by software and can be the only way to turn the card on/off
what i need to know:
- you press the switch and the card goes off - ok
- now if you press it again the card is supposed to turn on and star working
if this doesn't happen them something is wrong in code and i have to fix it
deam!
ieee80211_init_scan functions are for passive scan - TNW is this your code?
iwi3945 doesn't support it
the driver is full of bad code
i'll fix it and post to svn
hmmm, I cant even get my card to turn off. gonna take a look now
dmg was 748 by the way
QUOTE(jalavoui @ Apr 19 2008, 09:35 AM) 
iwi3945 wirless switch
the idea of the switch is to turn the card on(off
this is very hard to do by software and can be the only way to turn the card on/off
what i need to know:
- you press the switch and the card goes off - ok
- now if you press it again the card is supposed to turn on and star working
if this doesn't happen them something is wrong in code and i have to fix it
the idea of the switch is to turn the card on(off
this is very hard to do by software and can be the only way to turn the card on/off
what i need to know:
- you press the switch and the card goes off - ok
- now if you press it again the card is supposed to turn on and star working
if this doesn't happen them something is wrong in code and i have to fix it
Are you talking about a manual switch or simply using networkSelector to turn the card on or off?
If its for networkSelector, I believe I was able to turn it off and on.
iwi3945 rel 763
there's a bug in code related with timer functions
this is why the stations fail to work as they should
networkselector is disabled
i'd like to see this driver linux logs to check a few things - anyone?
there's a bug in code related with timer functions
this is why the stations fail to work as they should
networkselector is disabled
i'd like to see this driver linux logs to check a few things - anyone?
I leaved the card loaded for an hour or so. I've copied the messages of the conosole into a textfile called LOG. Got a KP trying to unload the kext and on startup, but i had the chance of making some logs. Booted with -s too and got KP too.
What do you mean driver linux logs? Im up for helpin you out. I can set up an ubuntu partition or just run off the live cd
I cant turn off the card
I cant turn off the card
Here are my Linux Logs.
dmesg and /var/log/syslog
also you can find my /var/log/kern here: http://rafb.net/p/mFK2CX67.html i can't download it here :S
if you need other log just tell me. =)
----
Edit: this are ipw3945, in a minute i upload the iwl3945 logs
----
Edit2: now here you can find also de iwl3945 logs
kern and messages logs here: http://rafb.net/p/vzbE8r82.html http://rafb.net/p/D3NaJH61.html
dmesg and /var/log/syslog
also you can find my /var/log/kern here: http://rafb.net/p/mFK2CX67.html i can't download it here :S
if you need other log just tell me. =)
----
Edit: this are ipw3945, in a minute i upload the iwl3945 logs
----
Edit2: now here you can find also de iwl3945 logs
kern and messages logs here: http://rafb.net/p/vzbE8r82.html http://rafb.net/p/D3NaJH61.html
booted with -x -s -v and did kextload - got a kp - attached are logs ass well.
Booted in -x. kextload, immediate freeze.
763 logs attached
Click to view attachmentClick to view attachmentClick to view attachment
763 logs attached
Click to view attachmentClick to view attachmentClick to view attachment
You need get this log after run these commands:
i can run these commands but i can not get the system.log file as jalavouis requested before! if you need my log by this way please tell me where i can get it? Hope this help anyone!!!
CODE
rmmod iwl3945 | modprobe iwl3945 debug=0xffffffff
i can run these commands but i can not get the system.log file as jalavouis requested before! if you need my log by this way please tell me where i can get it? Hope this help anyone!!!
my logs after
tiger2wander you can find your logs usually in /var/log/ maybe you should install something like syslog-ng
CODE
rmmod iwl3945 | modprobe iwl3945 debug=0xffffffff
tiger2wander you can find your logs usually in /var/log/ maybe you should install something like syslog-ng
the timer code is very wrong - gives kp on driver start
i'll try a fix
i need a linux log of iwl3945 - i don't see none usefull. note ipw3945 is a old driver i need iwl3945
iwi3945 rel 764
timer functions -> don't know if work is os x 10.5
i think this is the reason for the driver don't work
test with -x
i'm expecting some KP
iwl3945 linux log
what i need is a log like this:
http://www.intellinuxwireless.org/bugzilla...ent.cgi?id=1166
this log is older tham our mac os x version but i can see that the driver starts a scan by calling
ieee80211_sta_work
and this will depend on the timer functions...
there might be some bugs related with tx functions
iwi3945 driver status
very very unknown
iwi3945 rel 765
fix a bug in test_and_clear_bit
i'll try a fix
i need a linux log of iwl3945 - i don't see none usefull. note ipw3945 is a old driver i need iwl3945
iwi3945 rel 764
timer functions -> don't know if work is os x 10.5
i think this is the reason for the driver don't work
test with -x
i'm expecting some KP
iwl3945 linux log
what i need is a log like this:
http://www.intellinuxwireless.org/bugzilla...ent.cgi?id=1166
this log is older tham our mac os x version but i can see that the driver starts a scan by calling
ieee80211_sta_work
and this will depend on the timer functions...
there might be some bugs related with tx functions
iwi3945 driver status
very very unknown
iwi3945 rel 765
fix a bug in test_and_clear_bit
how can I get you a linux log?
Please keep in mind that the linux driver doesn't always enable the card. Sometimes the kernel spits a "NIC is in deep sleep" error and you have to reboot (a few times) to make it work!
Logs after modprobe iwl3945 debug=0xfffffff
and connecting to my AP with WAP encryption
To get more detailed logs it seems we need to compile a kernel with debugging enabled...
Logs after modprobe iwl3945 debug=0xfffffff
and connecting to my AP with WAP encryption
To get more detailed logs it seems we need to compile a kernel with debugging enabled...
CODE
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0b:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy2: Selected rate control algorithm 'iwl-3945-rs'
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:12:17:6f:db:b2
wlan0: RX authentication from 00:12:17:6f:db:b2 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:12:17:6f:db:b2
wlan0: RX AssocResp from 00:12:17:6f:db:b2 (capab=0x411 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: no IPv6 routers present
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0b:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy2: Selected rate control algorithm 'iwl-3945-rs'
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:12:17:6f:db:b2
wlan0: RX authentication from 00:12:17:6f:db:b2 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:12:17:6f:db:b2
wlan0: RX AssocResp from 00:12:17:6f:db:b2 (capab=0x411 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: no IPv6 routers present
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to short barker preamble (BSSID=00:12:17:6f:db:b2)
wlan0: switched to long barker preamble (BSSID=00:12:17:6f:db:b2)
do you get a kp with this release?
where?
i'd like to post a new one
where?
i'd like to post a new one
765 for testing:
Click to view attachment
Jalavoui: kextload fails:
kextload: extension iwi3945.kext appears to be loadable
kld(): Undefined symbols:
_IOPCCardAddTimer
_IOPCCardDeleteTimer
kextload: kld_load_from_memory() failed for module /iwi3945.kext/Contents/MacOS/iwi3945
kextload: a link/load error occured for kernel extension iwi3945.kext
link/load failed for extension iwi3945.kext
Click to view attachment
Jalavoui: kextload fails:
kextload: extension iwi3945.kext appears to be loadable
kld(): Undefined symbols:
_IOPCCardAddTimer
_IOPCCardDeleteTimer
kextload: kld_load_from_memory() failed for module /iwi3945.kext/Contents/MacOS/iwi3945
kextload: a link/load error occured for kernel extension iwi3945.kext
link/load failed for extension iwi3945.kext
I tried out your kext mlazy with the same error:
kextload: extension iwi3945.kext appears to be loadable
kld(): Undefined symbols:
_IOPCCardAddTimer
_IOPCCardDeleteTimer
kextload: kld_load_from_memory() failed for module /Users/drandre/Desktop/iwi3945.kext/Contents/MacOS/iwi3945
kextload: a link/load error occured for kernel extension iwi3945.kext
link/load failed for extension iwi3945.kext
(run kextload with -t for diagnostic output)
Im going to run the diagnostic now bbsoon
EDIT: diagnostic shows nothing
kextload: extension iwi3945.kext appears to be loadable
kld(): Undefined symbols:
_IOPCCardAddTimer
_IOPCCardDeleteTimer
kextload: kld_load_from_memory() failed for module /Users/drandre/Desktop/iwi3945.kext/Contents/MacOS/iwi3945
kextload: a link/load error occured for kernel extension iwi3945.kext
link/load failed for extension iwi3945.kext
(run kextload with -t for diagnostic output)
Im going to run the diagnostic now bbsoon
EDIT: diagnostic shows nothing
Jalavoui,
I booted from my Ubuntu live cd and grabbed the whole syslog. the only entries for my card were:
Apr 19 20:45:50 ubuntu kernel: [17179655.700000] ipw3945: Intel® PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
Apr 19 20:45:50 ubuntu kernel: [17179655.700000] ipw3945: Intel® PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
Apr 19 20:45:50 ubuntu kernel: [17179655.700000] ipw3945: Copyright© 2003-2006 Intel Corporation
Apr 19 20:45:50 ubuntu kernel: [17179655.772000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Apr 19 20:45:50 ubuntu kernel: [17179655.772000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Apr 19 20:45:50 ubuntu kernel: [17179657.996000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
Should I do something in Ubuntu to make the driver load more/differently?
Click to view attachment
I booted from my Ubuntu live cd and grabbed the whole syslog. the only entries for my card were:
Apr 19 20:45:50 ubuntu kernel: [17179655.700000] ipw3945: Intel® PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
Apr 19 20:45:50 ubuntu kernel: [17179655.700000] ipw3945: Intel® PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
Apr 19 20:45:50 ubuntu kernel: [17179655.700000] ipw3945: Copyright© 2003-2006 Intel Corporation
Apr 19 20:45:50 ubuntu kernel: [17179655.772000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Apr 19 20:45:50 ubuntu kernel: [17179655.772000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Apr 19 20:45:50 ubuntu kernel: [17179657.996000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
Should I do something in Ubuntu to make the driver load more/differently?
Click to view attachment
QUOTE(mlazy @ Apr 19 2008, 09:03 PM)
Apr 19 20:45:50 ubuntu kernel: [17179657.996000] ipw3945
this is a very old driver - try iwl3945 1.2.23 wich is the same as the version we're working.
if you take a look to the linux log i post you'll understand what iwi3945.kext is expected to do
iwi3945 rel 769
i'm trying to make timers work
i need someone to look at this code, run a few tests and change it to make it work
the driver will not work without this
look at:
setup_timer(&ifsta->timer, ieee80211_sta_timer,(unsigned long) sdata);
i think this is were all the driver magic happens
the problem:
all xxx_timer functions aren't tested and need to be fixed
there are several ways to write these code - hope someone can help
wow... all of a suddent the board stopped moving... is it down or somethin' ?
Revision 769
iwi3945:
Version: 1.0.0d1
Last Modified: 4/20/08 9:57 AM
Get Info String: Copyright Joel Thomas 2005
Location: /System/Library/Extensions/iwi3945.kext
kext Version: 1.0.0d1
Load Address: 0x354cd000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Unknown
And some logs in different stages of boot and networkSelector used: Click to view attachment
By the way ... no more system freezes, no more kernel panic
iwi3945:
Version: 1.0.0d1
Last Modified: 4/20/08 9:57 AM
Get Info String: Copyright Joel Thomas 2005
Location: /System/Library/Extensions/iwi3945.kext
kext Version: 1.0.0d1
Load Address: 0x354cd000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Unknown
And some logs in different stages of boot and networkSelector used: Click to view attachment
By the way ... no more system freezes, no more kernel panic
No more KP's or freezes, it just scans... (No KP on boot, manual kextload etc.).
In system.log it's just scanning. Nothing else.
I'll post my system.log now.
Nicely done!
EDIT: It's scanning for almost 1 hour... So I think it works now!!! The next step: select a network
My on/off switch also works.When I switch it of, it stops scanning, when I switch it back on, It starts scanning again! (only the light doesn't work, but that was a common problem with most of the cards I ment.)
In system.log it's just scanning. Nothing else.
I'll post my system.log now.
Nicely done!
EDIT: It's scanning for almost 1 hour... So I think it works now!!! The next step: select a network
My on/off switch also works.When I switch it of, it stops scanning, when I switch it back on, It starts scanning again! (only the light doesn't work, but that was a common problem with most of the cards I ment.)
I'm sooo exited ! 
QUOTE(rubinho93 @ Apr 20 2008, 09:42 AM)
In system.log it's just scanning. Nothing else.
I'll post my system.log now.
I'll post my system.log now.
goto console and use reload to get log lines from driver first load stage - this logs don't help
iwi3945 rel 770
the timers aren't working - this is no easy code
to see if the driver scan see the linux log i've posted - no false alarms please
i'm expecting kp
QUOTE(jalavoui @ Apr 20 2008, 11:21 AM)
goto console and use reload to get log lines from driver first load stage - this logs don't help
Ok, I'll try that. (my system is just crashed, it automaticly installed the graphics update for some reason. I'm restoring my laptop from a time machine backup now.)
BTW, I mentioned, when I shut down my computer it continues scanning for 2 minutes or so. After it did that, it shuts down.
Logs 770 Click to view attachment
jalavoui at first load ... kp after 10 minutes
second boot with -s
check_firstup
connect
request scan - diabled!
check_firstup
check_firstup
disconnect
Now i am after a normal boot ... no KP ... see the logs and tell me if are useful
jalavoui at first load ... kp after 10 minutes
second boot with -s
check_firstup
connect
request scan - diabled!
check_firstup
check_firstup
disconnect
Now i am after a normal boot ... no KP ... see the logs and tell me if are useful
iwi3945 rel 771
this version as less debug output
test with -x if get a KP
networkselector is disabled
if you get errors in system.log try a few reboots
this version as less debug output
test with -x if get a KP
networkselector is disabled
if you get errors in system.log try a few reboots
Testing 771
KP with normal boot
Boot -x then kextload, logs attached.
Click to view attachmentClick to view attachmentClick to view attachment
Let me know if you want a screenshot of the kp or if you need different logs.
KP with normal boot
Boot -x then kextload, logs attached.
Click to view attachmentClick to view attachmentClick to view attachment
Let me know if you want a screenshot of the kp or if you need different logs.
this code is so wrong...
i'll try to fix it
i'll try to fix it
Sorry,
but how can I get the latest rev of iwi3945.kext and what are the steps to install them?
but how can I get the latest rev of iwi3945.kext and what are the steps to install them?
Thanks for this link, but the links on this page doesn't function.
Thanks to all who have dedicated their time to this project its much appreciated
iwi3945 rel 772
timers are working!
the system.log can be very large -> make shore you get inital log lines
timers are working!
the system.log can be very large -> make shore you get inital log lines
I would like to test rel772 pls? Unfortunately this link is broken http://forum.insanelymac.com/index.php?sho...iew=getlastpost
You can download it here: http://iwidarwin.googlecode.com/svn/trunk/...45_new-osx10.5/
Thank you for your work guys !!!
I hope that we will haveintel3945's driver that it will be functionnal !!
I hope that we will haveintel3945's driver that it will be functionnal !!
Testing 772
Normal boot, installed kext. Appears to be scanning.
No kp after a few mins so tried reboot. Shutdown takes a long time, looks like the card keeps scanning quite a while.
Normal reboot successful (no kp!), doesn't look like the card is scanning though?
Logs attached.
Click to view attachmentClick to view attachment
Hope I captured everything you need, let me know if you need it tested in some other way.
Normal boot, installed kext. Appears to be scanning.
No kp after a few mins so tried reboot. Shutdown takes a long time, looks like the card keeps scanning quite a while.
Normal reboot successful (no kp!), doesn't look like the card is scanning though?
Logs attached.
Click to view attachmentClick to view attachment
Hope I captured everything you need, let me know if you need it tested in some other way.
I wasnt as lucky as Bobo, after normal boot installation, got immediate freeze. Booted into -x and got this log, damn it didnt save brb, booting back into leopard
Logs Click to view attachment
No KP ... the logs are very different than from the others releases
No KP ... the logs are very different than from the others releases
hmmm maybe i messed up, gonna try again
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.