KP after 10 minutes. Here is my log for Rev 751

751 logs --would anyone care to make sure that I'm doing this right? I didn't see all of the packets sent in my systemlog like the others?

I think, if you want to see the packets, you need the system.log, you can get it by typing in the terminal
cd /var/log
tail -f system.log

Then you'll see the log.

752 kext:

Click to view attachment

going to test

751 log with manual kextload, no freeze yet.

Click to view attachment

hallo! finally I can give a hand!
751, with kext precompiled:

could run kext without KP, but had KP after 5-7 minutes.

p.s. I posted also ifconfig output. is it useful?

gotcha, sorry --I was confusing the previous getlogs command as having that covered. Thanks!

hi, tested the ver 751 freeze about 30 seconds after booting here is the log.
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: iwi3945: Starting
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: Someone called createOutputQueue()
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: settCurController [OK]
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: IOPCCard info: iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23d
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: IOPCCard info: iwl3945: Copyright© 2003-2007 Intel Corporation
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_alloc_hw @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:5542
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: sta_info_init @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:5373
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_if_sdata_init @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2044
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_alloc_hw [OK]
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_pci_probe pci_resource_len = 0x00000008
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_pci_probe pci_resource_base = 0x2df4d000
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: IOPCCard info: iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rxon_channel Staging channel set to 6 [3]
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: init_waitqueue_head stubbed out!
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_pci_probe MAC address: 00:18:de:c3:38:f9
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_rate_control_register @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:945
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_register_hw @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2639
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: sta_info_start @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2036
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_init_rate_ctrl_alg @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2515
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: rate_control_alloc @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2330
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_rate_control_ops_get @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2317
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_try_rate_control_ops_get @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2299
Apr 17 22:24:18 sberlas-mac-pro configd[35]: PMSettingsPSChange() Battery Power
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: IOPCCard debug: en1: Selected rate control algorithm 'iwl-3945-rs'
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_if_add @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2229
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_if_sdata_init @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2044
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: ieee80211_if_set_type @ /Users/super/Desktop/iwi3945/751/iwi3945_new-osx10.5/compatibility.cpp:2170
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: warning en1: Failed to add default virtual iface
Apr 17 22:24:18 sberlas-mac-pro kernel[0]: Someone called createOutputQueue()
Apr 17 22:24:19 sberlas-mac-pro kernel[0]: IOPanelDevice: Machine Is Laptop!
Apr 17 22:24:19 sberlas-mac-pro kernel[0]: IOPanelDevice: Registered OK!
Apr 17 22:24:19 sberlas-mac-pro kernel[0]: darwin_iwi3945::configureInterface()
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: VGA: family specific matching fails
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v6.2
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: ALCinject: Starting.
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: ALCinject: Setting built-in=<data not shown>
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: ALCinject: Setting layout-id=<data not shown>
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: VGA: family specific matching fails
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Probing.
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,VRAM,memsize=<data not shown>
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting NVCAP=<data not shown>
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting rom-revision=NVinjectGo 0.2.0
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,compatible=NVDA,NVMac
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,name=NVDA,Display-B
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,name=NVDA,Display-A
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,compatible=NVDA,NVMac
Apr 17 22:24:20 sberlas-mac-pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,device_type=display
Apr 17 22:24:20 sberlas-mac-pro mds[21]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting model=Graphics by NVIDIA
Apr 17 22:24:20 sberlas-mac-pro loginwindow[23]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,device_type=display
Apr 17 22:24:20 sberlas-mac-pro ATSServer[81]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,display-type=LCD
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting name=NVDA,Parent
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting device_type=NVDA,GeForce
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting VRAM,totalsize=<data not shown>
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,VRAM,memsize=<data not shown>
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: dsmos: Initializing...
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: dsmos: Hook and decryption contexts set!
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: dsmos: Starting...
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: check_firstup
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:16:d3:51:74:30
Apr 17 22:24:20 sberlas-mac-pro kernel[0]: darwin_iwi3945: Ethernet address 00:18:de:c3:38:f9
Apr 17 22:24:23 sberlas-mac-pro kernel[0]: check_firstup
Apr 17 22:24:25 sberlas-mac-pro kernel[0]: NTFS driver 2.1 [Flags: R/O].
Apr 17 22:24:25 sberlas-mac-pro kernel[0]: check_firstup


sorry don't know how post it in other way,

Jalavoui, you're onto something! my card is on fire! watch this log value:

iwl3945_hw_reg_txpower_get_temperature Temperature: 127
Apr 17 16:42:22 Sony kernel[0]: error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0409, 56 bytes at 9[9]:4
Apr 17 16:42:22 Sony kernel[0]: error iwl3945: U iwl3945_rx_handle r 12 i 11 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
Apr 17 16:42:22 Sony kernel[0]: error iwl3945: U iwl3945_send_cmd_sync Wait REPLY_TX_PWR_TABLE_CMD Condition: 49ms left
Apr 17 16:43:22 Sony kernel[0]: error iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 130
Apr 17 16:44:22 Sony kernel[0]: error iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 132
Apr 17 16:45:22 Sony kernel[0]: error iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 133
Apr 17 16:45:22 Sony kernel[0]: error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x040A, 56 bytes at 10[10]:4
Apr 17 16:45:22 Sony kernel[0]: error iwl3945: U iwl3945_rx_handle r 13 i 12 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
Apr 17 16:45:22 Sony kernel[0]: error iwl3945: U iwl3945_send_cmd_sync Wait REPLY_TX_PWR_TABLE_CMD Condition: 49ms left
Apr 17 16:46:22 Sony kernel[0]: error iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 134
Apr 17 16:47:14 Sony /usr/sbin/ocspd[398]: starting
Apr 17 16:47:22 Sony kernel[0]: error iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 134
Apr 17 16:48:22 Sony kernel[0]: error iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 134


Now checkthis out! I just turned the card off with the switch and it sees that I did it:

Apr 17 16:51:53 Sony kernel[0]: error iwl3945: U iwl3945_rx_handle r = 14, i = 13, CARD_STATE_NOTIFICATION, 0xa1
Apr 17 16:51:53 Sony kernel[0]: error iwl3945: U iwl3945_rx_card_state_notif Card state received: HW:Kill SW:On
Apr 17 16:51:53 Sony kernel[0]: warning iwl3945: Radio Frequency Kill Switch is On:
Apr 17 16:51:53 Sony kernel[0]: Kill switch must be turned off for wireless networking to work.
Apr 17 16:51:53 Sony kernel[0]: error iwl3945: U iwl3945_rx_handle nothing sent from uCode r = 14, i = 14

P.S. Net selector no longer freezes the machine, now I get:

Apr 17 16:57:47 Sony kernel[0]: error iwl3945: APs don't scan.

mlazy,
great log

now it's easy to see what's wrong
i'll put another version in svn

iwi3945 rel 753
thanks for the logs - hope this one gets better
tip: if the driver is running stable try to use networkselector to start a scan - see what happens in console-system.log. only scan it once. the options for on/off don't work
tip2: if you have a wireless switch. when you press it the card can go off. pressing again will turn it on - first versions of iwi2200 uses this to turn the card on/off - this was before networkselector works

this line:
Apr 17 16:57:47 Sony kernel[0]: error iwl3945: APs don't scan.
is because the driver fails to configure correctly
as soon as i hack all this bugs the driver will work

Click to view attachment

753 kext and app:

Click to view attachment

Click to view attachment

will test in an hour, have a mtg....

righteye,
you're a bit late
but thanks
all logs help - some iwi3945 cards work better than others

this lines:
mDNSResponder[22]: ERROR: mDNSPlatformTCPConnect - connect failed: socket 9: Error 64 Host is down
i do hope you're unpluging cables of other network devices - right?
ALL connections must be off before testing iwi3945

test 752 freeze a little bit later than others. i use kexthelper b7 to load kext. this is log
Apr 17 23:10:56 localhost kernel[0]: iwi3945: Starting
Apr 17 23:10:56 localhost kernel[0]: Someone called createOutputQueue()
Apr 17 23:10:56 localhost mDNSResponder[22]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 23:10:56 localhost kernel[0]: settCurController [OK]
Apr 17 23:10:56 localhost kernel[0]: IOPCCard info: iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23d
Apr 17 23:10:56 localhost kernel[0]: IOPCCard info: iwl3945: Copyright© 2003-2007 Intel Corporation
Apr 17 23:10:56 localhost kernel[0]: ieee80211_alloc_hw @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:5542
Apr 17 23:10:56 localhost kernel[0]: sta_info_init @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:5373
Apr 17 23:10:56 localhost kernel[0]: ieee80211_if_sdata_init @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2044
Apr 17 23:10:56 localhost kernel[0]: ieee80211_alloc_hw [OK]
Apr 17 23:10:56 localhost kernel[0]: error iwl3945: U iwl3945_pci_probe pci_resource_len = 0x00000008
Apr 17 23:10:56 localhost kernel[0]: error iwl3945: U iwl3945_pci_probe pci_resource_base = 0x2de9c000
Apr 17 23:10:56 localhost kernel[0]: IOPCCard info: iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Apr 17 23:10:56 localhost kernel[0]: error iwl3945: U iwl3945_set_rxon_channel Staging channel set to 6 [3]
Apr 17 23:10:56 localhost kernel[0]: init_waitqueue_head stubbed out!
Apr 17 23:10:56 localhost kernel[0]: error iwl3945: U iwl3945_pci_probe MAC address: 00:18:de:c3:38:f9
Apr 17 23:10:56 localhost kernel[0]: ieee80211_rate_control_register @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:945
Apr 17 23:10:56 localhost kernel[0]: ieee80211_register_hw @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2639
Apr 17 23:10:56 localhost kernel[0]: sta_info_start @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2036
Apr 17 23:10:56 localhost kernel[0]: ieee80211_init_rate_ctrl_alg @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2515
Apr 17 23:10:56 localhost kernel[0]: rate_control_alloc @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2330
Apr 17 23:10:56 localhost kernel[0]: ieee80211_rate_control_ops_get @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2317
Apr 17 23:10:56 localhost kernel[0]: ieee80211_try_rate_control_ops_get @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2299
Apr 17 23:10:56 localhost kernel[0]: IOPCCard debug: en1: Selected rate control algorithm 'iwl-3945-rs'
Apr 17 23:10:56 sberlas-mac-pro kernel[0]: ieee80211_if_add @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2229
Apr 17 23:10:56 sberlas-mac-pro kernel[0]: ieee80211_if_sdata_init @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2044
Apr 17 23:10:56 sberlas-mac-pro configd[35]: setting hostname to "sberlas-mac-pro.local"
Apr 17 23:10:57 sberlas-mac-pro kernel[0]: ieee80211_if_set_type @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:2170
Apr 17 23:10:57 sberlas-mac-pro kernel[0]: warning en1: Failed to add default virtual iface
Apr 17 23:10:57 sberlas-mac-pro configd[35]: PMSettingsPSChange() Battery Power
Apr 17 23:10:57 sberlas-mac-pro kernel[0]: Someone called createOutputQueue()
Apr 17 23:10:57 sberlas-mac-pro kernel[0]: darwin_iwi3945::configureInterface()
Apr 17 23:10:57 sberlas-mac-pro kernel[0]: IOPanelDevice: Machine Is Laptop!
Apr 17 23:10:57 sberlas-mac-pro kernel[0]: IOPanelDevice: Registered OK!
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVDANV40HAL loaded and registered.
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v6.2
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: ALCinject: Starting.
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: ALCinject: Setting built-in=<data not shown>
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: ALCinject: Setting layout-id=<data not shown>
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: VGA: family specific matching fails
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: dsmos: Initializing...
Apr 17 23:10:58 sberlas-mac-pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: dsmos: Hook and decryption contexts set!
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: dsmos: Starting...
Apr 17 23:10:58 sberlas-mac-pro mds[21]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 23:10:58 sberlas-mac-pro loginwindow[23]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: check_firstup
Apr 17 23:10:58 sberlas-mac-pro mds[21]: (/.Spotlight-V100/Store-V1/Stores/695652E0-2594-4E9A-9C3A-ED7F4AB581BC)(Error) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /.Spotlight-V100/Store-V1/Stores/695652E0-2594-4E9A-9C3A-ED7F4AB581BC/live.2.; needs recovery
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: VGA: family specific matching fails
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Probing.
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,VRAM,memsize=<data not shown>
Apr 17 23:10:58 sberlas-mac-pro ATSServer[79]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Setting NVCAP=<data not shown>
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Setting rom-revision=NVinjectGo 0.2.0
Apr 17 23:10:58 sberlas-mac-pro WindowServer[91]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,compatible=NVDA,NVMac
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,name=NVDA,Display-B
Apr 17 23:10:58 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,name=NVDA,Display-A
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,compatible=NVDA,NVMac
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,device_type=display
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting model=Graphics by NVIDIA
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,device_type=display
Apr 17 23:10:59 sberlas-mac-pro backupd-helper[94]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @1,display-type=LCD
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting name=NVDA,Parent
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting device_type=NVDA,GeForce
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting VRAM,totalsize=<data not shown>
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: NVinjectGo: Setting @0,VRAM,memsize=<data not shown>
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:16:d3:51:74:30
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: darwin_iwi3945: Ethernet address 00:18:de:c3:38:f9
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: darwin_iwi3945::enable()
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: ifconfig going up
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: outputPacket called by someone
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: outputPaccket2 called
Apr 17 23:10:59 sberlas-mac-pro kernel[0]: tx pkt with net down
Apr 17 23:11:00 sberlas-mac-pro kernel[0]: NTFS driver 2.1 [Flags: R/O].
Apr 17 23:11:00 sberlas-mac-pro kernel[0]: NTFS volume name ACER, version 3.1.
Apr 17 23:11:00 sberlas-mac-pro com.apple.SystemStarter[16]: Tuning TCP/IP stack for 2.5G/3G performance
Apr 17 23:11:00 sberlas-mac-pro com.apple.SystemStarter[16]: kern.ipc.maxsockbuf: 8388608 -> 1048576
Apr 17 23:11:00 sberlas-mac-pro com.apple.SystemStarter[16]: net.inet.tcp.slowlink_wsize: 8192 -> 65535
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: 5: U iwl3945_set_rate Adding rate index 0 (plcp 10)*
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 1 (plcp 20)*
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 2 (plcp 55)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 3 (plcp 110)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 4 (plcp 13)*
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 5 (plcp 15)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 6 (plcp 5)*
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 7 (plcp 7)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 8 (plcp 9)*
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 9 (plcp 11)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 10 (plcp 1)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Adding rate index 11 (plcp 3)
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_set_rate Set active_rate = fff, active_rate_basic = 153
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_commit_rxon Sending RXON
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: * without RXON_FILTER_ASSOC_MSK
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: * channel = 1
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: * bssid = 00:00:00:00:00:00
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: Error sending REPLY_RXON: Already sending a host command
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: Error setting new configuration (-16).
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_mac_config leave
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: __ieee80211_if_config @ /Users/super/Desktop/iwi3945/752/compatibility.cpp:6249
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_mac_config_interface enter: interface id 592257056
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_commit_rxon Sending RXON
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: * without RXON_FILTER_ASSOC_MSK
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: * channel = 1
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: * bssid = 00:00:00:00:00:00
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: Error sending REPLY_RXON: Already sending a host command
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: Error setting new configuration (-16).
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_mac_config_interface leave
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_rx_handle r 10 i 9 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_send_cmd_sync Wait REPLY_TX_PWR_TABLE_CMD Condition: 49ms left
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: error iwl3945: U iwl3945_alive_start ALIVE processing complete.
Apr 17 23:11:01 sberlas-mac-pro kernel[0]: __ OUT iwl3945_alive_start __

this is a nice comment

sberla,
goto iwidarwin site and download the getlogs.command to build logs

iwi3945
need faster logs

about development
i'm trying to make this work without the card
but unless i have TNW or someone else with knowledge of iwidrivers code
i don't think i manged to make the driver work

you can try this script to build iwi3945.dmg
move it to iwi3945 folder
open console
use cd ... until reach iwi3945 folder
type sh dmg.sh to run the script or sudo sh dmg.sh

ok i did it, what hav i got to do with this command?

Revision 753
Click to view attachmentClick to view attachment
I know i am slow ... my system started to act slow ... but here i am
Cheers

that's a pic of loading iwi3945_v752 precompiled, in -s mode.

is still useful to kextload it in -s mode??

what is it doing when:
'check_firstup'?

it gives this a lot of times, then KPs.

thanks

until someone figure out why otion -s doesn't work as in mac os x 10.4
it will not help to test the driver

iwi3945 rel 754
thanks to righteye for finding this bug

why do you have this in your log?
Apr 18 00:29:48 right-eyes-mac-pro mDNSResponder[30]: ERROR: mDNSPlatformTCPConnect - connect failed: socket 9: Error 64 Host is down


insanleymac forum:
2322 user(s) active in the past 30 minutes
come here to test this great driver

i think because of the network ... i unplugged the cable ... and i am using a rooter that gives the IP on local network. i do not get that if the cable is in ...
i'll try the new build in a few minutes and give some logs.

Running 753 on a lenovo T61 get's the same error as righteye...cheRunning 753 on a lenovo T61 get's the same error as righteye...Warning en1: Failed to add default virtual ifacedarwin_iwi3945::configureInterface()check_firstup and then KPthe good news is I was able to see the adapter on system preferences / network...You are in a good way.... I'll keep on reading to see if I'm able to compile the kext directly instead of wait for new releases

Logs 754
Click to view attachmentClick to view attachmentClick to view attachment
Hope this helps!

The line in the log you mentioned jalavoui is there and the cable is plugged ... no idea what is going on
Apr 18 01:14:59 right-eyes-mac-pro mDNSResponder[22]: ERROR: mDNSPlatformTCPConnect - connect failed: socket 19: Error 64 Host is down

Iwi 753 from mlazy.

Sorry, everytime i try to use the logs command, got empty logs...

This one is from console, loading the kext manually, very stable for me (Sony vaio too), just freeze on reboot or using scan selector.

Asus F3Sc, vanilla kernel 10.5.2:

Alright I'm home, Jalavoui got a question for ya. When i compiled the new source in xcode for 2200 like does it create a .dmg file or do i have to create that? I see where it creates the .kext file so i know its working and it doesn't give me those permission errors anymore (thanks) so yeah let me know. Going to test it out see if its better.

Thanks

ok- better just unplug the cable
in this logs i can't check inital driver startup
have you tryed to call network selector scan option?


FurmanSK,
delete the old .dmg and xcode will create a new one for you
if it works post iwi2200.dmg here

olvko,
do you get a panic booting in normal mode? try -v or a few reboots

pere,
your logs are interesting - can you make the driver run with less bugs?

iwi3945
i'll need more logs - inital drive log lines are very important and i can't see them from previous logs
we'll continue tomorrow
thanks

ok
last one to test

iwi3945 rel 755
code in svn tree

754 logs:

Click to view attachment

754 kext for testing:

Click to view attachment

netselector:

Click to view attachment

callin netselector gave imediate freeze, 1 log entry that said "connect"

Click to view attachment

Alright did that Jalavoui and got this error in the pic i uploaded.

Weird i know.

Jala,

problems with 755;

build error: IOSLeep was not declared in this scope.

Kextload states:

can't add kernel extension iwi3945.kext (validation error) (run kextload on this kext with -t for diagnostic output)
kernel extension iwi3945.kext has problems:
Validation failures:
{
"Kext claims an executable file but it doesn't exist" = true
}

Just for informations sake, I downloaded the 3945 .dmg and opened up and it had the package for installation. I didn't install it, but It did open and have the files in it. This was revision 748 (I believe). I'm running OS X 10.5.2.

Hello all

I fixed the code, (simple error, I am no developer) compiled and here's 755 for testing.

Click to view attachment

Click to view attachment

Here are my logs for it:

Click to view attachment

and running netselector gave an immediate freeze, but got a screenshot of it scanning:

Click to view attachment

night all...

Oh one more thing Jalavoui, this is with old 2200 not your updated ones, when i would select a different mode i think mode 2 (adhoc) it would freeze as soon as i'd turn it back on. Dont know if ya fixed it but might wanna take a look at it. I'll post some logs as soon as i get the new one compiled.

Heres my log for the 755...

Hope it helps.

Can someone help me out with this? Hard to test I can't load the kext in the first place

Alright jalavoui i just left the old .dmg file in there and built it and it worked but idk if it updated anything so i tried to manually load the kext files but i dont know where they all go. And when i did this it didn't load the file. I got some logs and stuff but i think its from when it loaded.

Did i load it wrong? Cause now its not wanting to load at all. Ah pisses me off dam apple. lol

Here is my logs... hope this help.

test of 3945 rev 755

I have this menu after boot and run networkselector:
1) Turn Card on/off
2) Start scan
3) Close program
0) Refresh

But system freeze after 5-30 sec after boot =(

Bootlog:
Click to view attachment

but the 4965agn drivers? On the project site i can't find the 4965agn drivers on SVN... Is someone working developing this drivers? Another question... If I buy a usb wireless key mac os x compatible... This usb key will work on my hackintosh leopard with the official dirvers for originals mac?

you should all thank mlazy for making a working version of iwi3945 - amazing iosleep make the driver load without errors!

FurmanSK,
if you build iwi2200.dmg right and it doesn't install what's the error?


iwi3945 rel 756
station scan - leave networkselelctor alone

is there any way to test this in -s or -v and make os x to auto load it?
this will help cause it will allow to see the panic log

Look back to the thread ... When the 3965 drivers will work and will be stable, the 4965 (which is very similar to the 3965) should be released a little after stay tuned !

iwi3945.dmg build
check if you get this
this is the new script
unzip it in iwi3945 main folder
open the terminal -> cd to iwi3945 folder (check my console_log)
sudo sh dmg.sh to call it
if the dmg build ok
open it
right click on iwi3945.pkg to see the contents
you should get a picture like this one

to instal the driver:
double click on iwi3945.pkg - this will call the installer

the iwi3945.dmg is about 592K
it just like to say that you don't need this if:
you delete iwi3945.dmg and press build in xcode it should do the same as in this script
maybe the problem is somewhere else (check iwi3945.pmproj - might need to be saved to work in mac os x 10.5 format)

anyway - try this script and copy paste what you get in console

well - i'm doing this in a genuine macintosh computer

Jalavoui,

I did some testing last night... Changed all of the OSbundle Library version numbers in the project plist file to match my versions. I compiled 755, and it's been running for almost an hour. This *could* have fixed some of the freezing issues? Or am I just getting lucky?

Hi Mlazy, Jalavoui,

I follow your steps for testing, but nothing happen when i install the lastest rel of iwi3945.... ???
In fact, after installing, when i go to Pref->Network-> No ariport interface appears..

Do i did something wrong ...?

just wanna help ....

------------------------------------
HP Compac nc6400
Intel Centrino Core 2Ghz
wifi Intel 3945ABG (not working yet)
Ethernet Broadcom NetXtreme Gigabit (not working)

Jalavoui,Here is the output of your script.. seems to be a problem with the dmg build at the end. It's the same problem I had with you pkg script which is why I made my own a while back. I think it's a 10.4 vs. 10.5 thing. SOMEONE send him a mac that can run 10.5! (where are you located anyway?)

ERROR: Could not copy resources to "English.lproj".hdiutil: create failed - No such file or directory

Click to view attachment

build 756 for testing:
Click to view attachment
Click to view attachment

756 logs: (Looking incredible; treid a scan, got "scan already in progress")

Click to view attachment

i have the same issue with the dmg script.
The xcode build doesn't provide me a DMG file although it builds perfectly without errors.
Trying to move the built kext to extensions(but it seems xcode automatically put it during the build), reboot >>> KP just after logged XD

i will try to get some logs wuith getlogs command

it may not work like that yet.

Just do a tail -f of your system log and post what you get. look to make sure there is info about iwi releated entries.

Hello all, I hope everyone is doing well today. Big up to mlazy and jalavoui for their hard work. When I get off the rounds today, I'll hook both of yall up with some paypal (not much as I still got some loans) and try to figure out how to get some logs.

Ive started to watch this thread on monday after getting sound to come out of my speakers on my laptop, but still no headphones, but at least I have sound, and started to move to figure out wifi. Im not a developer, a physician I am, but in college I spend my first two years in comp sci. I will gladly help this weekend, if there is anything I could do let me know. Running Kalyway 10.5.1 (its running fine i see no point to upgrade to 10.5.2)

Logs756
mlazy i used your kext and here are the logs:
Click to view attachmentClick to view attachment

Doctadre, thanks so much for the support. no need to paypal me, if you would like to donate, please send anythng to Jalavoui. Thanks!!fascinating, I wonder why you don't get these errors like I do:
Apr 18 09:12:26 Sony kernel[0]: error iwl3945: U iwl3945_pci_probe pci_resource_len = 0x00000008Apr 18 09:12:26 Sony kernel[0]: error iwl3945: U iwl3945_pci_probe pci_resource_base = 0x35d4c000

i could see those differences but have no idea why this is happening. seems to be like on graphic cards, each one works different

Jalavoui: IMPORTANT! I booted with -x to get these log results. The driver loads, has just a few lines, and then waits. When I do a full boot and kextload manually I get tons of logs. Is something interfering with the driver? Safe boot (-x) loads OS only (kinda like 10.4's -s with /sh command.