Confirmed by myself to work with the Lenovo S10 BCM4315.

Thanks for all the work!!

hi miglo, can you post the steps you did to make it work on lenovo s10? thanks in advance


***EDIT***

I was able to make it work with my S10 with a default installation of msiwindosx86.iso. However, it broke the sleep function, whether through closing the lid or manually selecting sleep

Hello

I have a dell m1330 laptop with the dell 1390 wireless card installed. The card was installed post leopard installation so i have to install it manually. I downloaded the 43xx file installed it like it said everything was sucessful, i restarted and i see the airport icon but when i click on it i have one option...to turn on airport. I click it and it does nothing. Same thing when you go into network manager. I click turn on airport and it does nothing.. Whats wrong? Thanks

I , just bought a Broadcom 4321 considered correct for supporting Airport Extreme Card for Duo Core Intel MacBook etc.Do u think I got prob on a msi wind with Leo?

I tried using a PCI Netgear WN311B in a standard Mac G5 dual 2.3 GHz with Leopard 10.5.5 unmodified and it wouldn't work. I tried adding the VID & DID to the 802.11 kext .plist and that didn't help either. Finally I used the bcm43xx_enabler_0.5.1pre.sh.zip and it WORKED 1st time! Hurray!

Here is the specifics of my card:

Type: Other Network Controller
Driver Installed: Yes
Bus: PCI
Slot: SLOT-4
Vendor ID: 0x14e4
Device ID: 0x4329
Subsystem Vendor ID: 0x1385
Subsystem ID: 0x7d00
Revision ID: 0x0001

The chipset is a BCM4321

Network Utility shows a/b/g/n enabled. Connection is good to an Apple Time Capsule 802.11n router.

mmhh, a bit of help..Igot the 4321 broadcom.Filled in a wind and immediately recongised as airport but with third something in system profiler, then my question is : if I used the script I could enable it as N later and recongised as airport extreme ?

4310/Dell 1395 mini works fine with pre1.

ok I checked better.
network utility give me an interface wifi 802.10.11 a/b/g/n .But the endor is unknown.Do u think is better try to modify the kext with the script or leaving everything as now ?
Thanks

i've got Broadcom BCM94312MCG, but i cant get it to work (but another member wrote he could get his one working with this installer).

any suggestions or a simple step-by-step what i have to to? my network panel is empty, so i cant even get the airport updates (coz i dont have a ethernet interface)?

I've changed my intel wireless mini pcie for a Broadceom BCM94321MC. It works just fine, nothing to install. It is recognized as AGN airport extreme.

Hy to all of you! I have a broadcom 4328 14e4:4328 , in a fujitsu siemens amilo pi1505, this card on another acer laptop with leo the wifi card works flawlessly in the siemens it gets recognized and appears the airport icon but I am not able to turn the card, in the airport icon says "No airport card installed, the laptop has a fisical On/Off button, it´s in the on position of course he he:) ), hope you all can help me! Thank you in advanced;)

Ps: both laptops have the same kalliway´s 10.5.2 S.O...

Hello

By mistake I've installed bcm43xx_enabler.sh.zip (the firy first version I think) on my Vostro 1510 and now OSX wont boot anymore. How can I undo the changes and get it back please?

thanks

Hi all,

I'm trying to track down a working method to get my HP 530 wireless up and running. It's a Broadcom 4312 - at least, that's what PC Utils tells me it is - but the actual hardware id is 4315.

The HP has a hardware button just beneath the screen that lights up blue when the wifi is powered up; it illuminates fine in Windows XP dual-boot but as soon as I reboot into OS X (10.5.2 Kalyway) it goes off, and stays off. There's nothing in OS X's system profiler or network preferences to indicate that the Broadcom exists at all.

Has anyone got the Broadcom in an HP 530 working? I'm intrigued to see if it's possible; this machine cost only £250 with 2Gb of RAM a couple of months ago, so I'm frankly amazed that Leopard installs on it at all (1.6Ghz celeron CPU). But it does, and it seems rapid enough for general use. All I need to do is get power management, Intel GMA gfx drivers and this Broadcom issue sorted and I'll be laughing!

Any suggestions gratefully received. I have tried the enabler, by the way, but all it's done is give me an error about the kext not being installed properly every time I boot up into OS X.

Discy

yes it works you have to enable it in the network options and use the bcm43xx_enabler_0.5.1pre.sh.zip

LastExile,

Thanks for that. I'm still relatively new to the system set-up side of OS X; can you recall enough of the process to give me an idiots' guide on 'enabling it in the network options' etc? In addition, I see you have the exact same machine as me; what drivers are you using for graphics?

Sorry for the trouble, but I've done some serious searching on this already and only come up with scraps of info applicable to the 530, so if you can help here then I'm sure other HP users will find it useful too.

Kind regards,

Discy

many thanks!!!

it's worked fo my dell vostro 1310 on bmc4310

Check PM

Update: fixed

Hey i tried the 0.5.1.pre.sh on my Dell Studio 1535 laptop (I'm using iDeneb).. but still no look. Nothing is showing up in Airport. Any ideas? Please help..

my computer is Dell inspiron 1525,the wireless card is BCM4315, i have make it work one time in iDeneb_v1_10.5.4 by bcm43xx_enabler.sh,but this version system don't recognize the DVD driver.After i update it to iDeneb_v1.1_10.5.4, the wireless card don't work even i use bcm43xx_enabler.sh.
who can help me? please email me:313975150@qq.com, thanks very much.

Dude, you are the man.

Worked first time around

Thank you so much....

Hello!

First a bit about my install:

So far its been IDeneb for all of these tests, as it has seemed most logical for a starting point on a Dell Studio 17 (reccomended by others) but currently I am installing kalyway 10.5.2 and choosing the "broadcom (not tested)" option and hoping for the best as I type this.  I've had no luck getting osx to reccognize my wireless card whatsoever.  The only thing that has been able to see it within osx so far is the lscp function inside of osx86tools (it shows the id number and that its a broadcom card).

I've done the following in an attempt to get things working:

- I tried All pci fixes listed here (since its not seen by osx, I thought it would be a logical place to start troubleshooting)

- I tried the broadcom SH file listed here

- I tried modifying info list both before and after sh file use

- I tried using kext installers to install several different kexts to try and get everything up to par

- I used osx86tool to do similar kext install / mass permission resets etc

- I downloaded the 5.5 combo update and used a pkg viewer (pacifist) to extract the newer I080211 file and install it with that kext installer. * a note on that:  Suprisingly the card I have is already listed in it - where its not listed by default in the 5.5 file that came with ideneb (it's the 432b one you have listed in the patch here), so perhaps this will all go away when the next big update is applied to an osx86 distro as I think its already supposed to be supported natively - lets hope that comes sooner than later!*

- I used the laptop up to a real osx machine via firewire and using pass-through to get internet access and download airport updates



I had high hopes for the 5.5 combo update attempt, when I saw the card model listed by default in the info list I got exited... but after using the kext installer with it I could no longer access my "network" settings without my system prefs panel just locking up and me having to force quit it.

I at NO POINT have had this show up inside system profiler on any attempt - so if I'm missing some critical step - PLEASE tell me what it might be.  I've tried everything I can think of outside of hammering different distros and praying - which is what I'm doing right now.

Thanks for all your help so far, and in advance for any given to me to get past this roadblock!

Fujilives

here is the file I was referring to - that might end up helping all of us with the problem.

If you look - it says:

  <string>pci106b,4e</string>
  <string>pci14e4,4311</string>
  <string>pci14e4,4312</string>
  <string>pci14e4,4313</string>
  <string>pci14e4,4318</string>
  <string>pci14e4,4319</string>
  <string>pci14e4,431a</string>
  <string>pci14e4,4320</string>
  <string>pci14e4,4324</string>
  <string>pci14e4,4325</string>
  <string>pci14e4,4328</string>
  <string>pci14e4,432b</string>
  <string>pci14e4,432c</string>
  <string>pci14e4,432d</string>



In the info.plist file, with no modifications whatsoever.  Are there other dependancies I need to get t his to work fromt he update file?  (I cant straight up update with the 5.5 combo update, it makes me crash and breaks osx - perhaps therse another way to get the full benefit of the combo update - any chance someone released a rigged version of it or something I can just throw on top of ideleb's 10.5.5?)

hey fujilives, i have the studio 1535 and my problem is the exact same as yours... I can see my card in osxtools lscp, but not it profiler.... Good Luck. I wish i could help but i'm stuck at the exact same spot as you!

10.5.5 update successful, no progress on wireless in the dell studio 17 ( 1735 ) working though.

Is there some way to force this card into networkinterfaces.plist - does it use standard information there?  Do you have said standard information I can copy and paste to make OSX see it?

Why does PCI Tools inside OSX see the card, but OSX itself not?



This is my last call for help, I've spent a week getting frustrated and wearing out my DVD rom drive on this., hopefully someone comes to the rescue or I'm caving and going back to XP.  Thank you for the interesting trip anyhow, I learned a lot about osx I didn't know before this (and I own a mac pro that I do FCP editing and gfx work on profressionally)



Thanks,

Fujilives

OSX Wireless status on the dell studio 17 = Not working.



I caved and put windows xp back on and passed up on this for now - perhaps I'll try again in snow-leopard.

I'll check in here from time to time and see if anyone manages to get this working.



Fuji

Problem?
I installed iAtkos 2.0i on my Compaq Preasrio c701ea and there is no AppleAirPort... thing in the 1080211Family.kext ? I changed the .kext to a zip so i could look in the folder and there was only an autherios something in there?

Please help...?
Or locate me to a place where i can get a driver for mac for my wireless

Thanks

I am suffering from the same problem, please, can somebody shed some light on it? Really Mac is useless without internet.

please someone can help about Broadcom BMC5906 kext for Leopard 10.5.4???
any solution or ideas are welcome... please!!!

Will this card work if I put it in my eeePC and loaded the kext for it?

http://cgi.ebay.com/HP-PCI-E-Broadcom-4311...018104001r30003

yes

Running the iDeneb .5.5 I used the enabler and still no joy for wifi dell 1510-N wireless card AKA Broadcom 4322 or as PCI puts it 432b. Can we please make somthing happen McSmart I hope you can help or LastExile? I am very frustrated I have had other machines run great with osx86 many differnet versions as well I am stuck and have no internet....... PLEASE HELP

Ok, I've tried the "pre" version (I have the 4322) and I get a kernel panic.

Details:

Backtrace terminated-invalid frame pointer 0

Kernel loadable modules in backtrace (with dependencies):

com.apple.driver.AirPortBrcm43xx(224.79)@0x4b1d6000->0x4b273fff
dependency: com.apple.iokit.IO80211Family(162.1)@0x4b1b7000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x3d6fe000

Mac OS version:
9C7010

Kernel version:
Darwin Kernel Version 9.2.0
System model name: Hp Pavilion tx2500 Notebook PC (30F1)

Note: Some info ommited. If you need, I can post...

Thanks!

After trying several things I decided I would do a fresh install I then linked up my blackberry via usb and shared the data connection. I ran the software update from Apple and now my 4322 is working its a miracle. It shows as a 3rd party airport card.... but I did not load anything at all other than the bare minimum on my reinstall of iDeneb .5.5 disk. I am so happy I can not hardly stand it........ Everything is looking up.

Its funny that apple fixed this on there own......
Thank you though for all your efforts.

can anyone explain to me how to do this im lost

Okay here you go I did a fresh install and then I installed the following package from apple it self deletes after install however my 432b aka Dell 1510-N is now working. Please post you success you can get the file here

Thanks for the hint. I am able to confirm that the 2008-04 Airport Extreme patch from Apple does enable support for the Dell 1510/BCM4322. I did not have to do a fresh install. I just used Software Update to download and apply the patch. Powered off the machine and inserted the 1510 and powered on. OS X recognized the card right away.

is there any1 that can guide me threw this cause when i install the patch my computer is still saying i have no airport card

Any word on if this gets things going on a dell studio 17?

I couldn't test it a couple weeks ago when I was working on things, but the date on the apple website says "October 29, 2008" - So if this new release fixes things, I'm wiping windows, reinstalling ideneb, and delving back into the osx86 world where I'll try to get my video and sound to work


*PS - THE QUICK EDIT FUNCTION ON THESE FORUMS IS FRICKIN SWEET.*

I think the only difference is the size of your screen however if you can tell me a little about your system. it would be a big help.



Tell me about your system...... I know that it has worked for many other dell studio users but, you are a little vague do you know the exact model and does the icon show up on the top tool bar after reboot?




That is great I only did a fresh install so I could grab the folder out of the update so I could post it here.

You do not have to do a fresh install I should have mentioned that.
I posted this here in the event others were having trouble getting the updates in other ways.

thanks for the help I have a Hp dv5218nr and I tried to apply the patch to my system but no luck it still saying there is no aiport card

Hey!  I wiped my xp install again (>< just got it the way I like it).

But I wanted to say AWESOME FIND!  After trying, basically EVERY EFFING SOLUTION, the one that fixes it on the dell studio 17 is the new (oct 28) airport patch.  I wish that had existed when I was trying to get it to work originally!

I downloaded the copy straight from apple, using an ideneb 10.5 install, and wireless was reccognized and worked immediately after rebooting - during apple-logo you see the wi-fi icon light up on your laptop and tears of joy come streaming down your face!

Now if that last exile fellow could manage to help us out with the ATI 3650 video-card, I think we'd be in the money!  As for audio, it looks like there is a new (as of like 5 days ago) solution to IDT audio on these forums, I'll try that out after I reinstall Ideneb again (I kind of busted it trying to get video working) and report back to you - once we get this {censored} going fully I'll hap-hap-happily set up a tutorial for osx86ing the dell studio systems!

Oh, and HAPPY HALLOWEEN!

Hi all.
Can somebody tell me where I can get latest version driver's for bcm94311mcg?
For example, on WinXP the indicator blinking when data transferred by WLAN card,
and the LED is don't lights when adapter is turned off!
WLAN card is work, but LED is don't shone when it work and when card is turned off the LED is shone...

i tried it on my HP tx1240er Broadcom wireless - & still doesnt work
adapter ID
PCI\VEN_14E4&DEV_4312&SUBSYS_1371103C&REV_02
PCI\VEN_14E4&DEV_4312&SUBSYS_1371103C
PCI\VEN_14E4&DEV_4312&CC_028000
PCI\VEN_14E4&DEV_4312&CC_0280



but anyway tnx)

hi. the patch works. The card is detected as an airport card. It shows that it is on, but when i scan, it wont find any networks. Is there a fix? I have tried everything in the faqs.

Maybe the network you're looking for doesn't send the SSID. Try to enter it manually....
It's the same at home here.

i try.. same problem

i tryed that. it did not work. i have a 4329 carbus card (linksys WPC300N). It is detected as airport, but cannot find any networks.

Can you send me the kext, I cant seem to open the IO80211Family.kext to see other folders.
im kind of a n00b, sorry
any help would be appreciated

in order to open the kext you should right click on it and then select show contents...

I opened terminal and typed "sudo ./bcm43xx_enabler.sh" but got a No such file or directory

EDIT:
found solution by mcsmart on page 3. Thanks! You rock!

Rebooted but airport is not working. I must have did something wrong. (I'm using a 1000h) help?
I found an older appleairportbrcm4311.kext, used kexthelper, did the terminal stuff, rebooted but still no go...