I am wondering if someone has got his GeForce Go 7600 working with QE and CI on his laptop. I haven't found an solution to enable it. I used several natits, nvidiaEFI, laptopdisplay (didn't load...)... But I can't get it working.

Instead of that, the other thing is that I've got my laptop display working on the laptop itself without external or any hacks. Any natit or what driver you name: It just gives me screen on the build in laptop display which other people have problems with. Ive added an external monitor before, but also no QE/CI there. This is a little time ago so I do not remember if I had display on my laptop as well..

If some1 has an solution or any ideas how to fix it, I would really appreciate it. I am a Mac noob, but if you need any information, ask me and give me instructiuons when I need them..

My specs:
Asus A6T Laptop (AP008B)
AMD Turion 64 X2 TL-52 (working)
2GB DDR2-667 Dualchannel
nVidia nForce 410 chipset
100GB 5400rpm PATA disk
Realtek HDA ALC861 (only 2ch output)
Realtek Gbit LAN (working, using official realtek drivers )
Broadcom 4318WLAN (working great with the en0->en1 guide)

Graphics part:
NVIDIA GeForce Go 7600 256MB (450/400)
G73M chip
Output: Internal display, DVI, D-SUB and S-Video out ports.
PCI-Express 16x

Details (from windows)
VEN: 10DE
DEV: 0398

Thanks in advance.

Hmm... I've got GeForce Go 7600 QE/CI enabled w/o any probems with Titan. What version of OS you use?

Just install Natit drivers (some special installer from DiaboliK). All works.

GremliN, try asking DiaboliK, maybe he can help you.

I've got QE/CI on my 7600 Go, but only on an external monitor! It worked with almost all drivers! You should try some! I even got rotation support with some drivers

But untill now , there is NO driver that got my internal LCD working properly...
only MacVidia 1.0.81 on OSX 10.4.7 recognized my card/lcd which gave me 1280x800, but no QE/CI etc

If you got it working (with DiaboliK's help) than can you tell here how you did it ?!

hehe

some people just have to read the news some times : http://diabolik1605.com/DHF/iNews.html



-DiaboliK

oops didn't see it

added my info to that topic! hope you can do something with it and/or fix it for us Sony VAIO FE users


Which laptop are you going to get ?

Alienware Area-51 m5550 : Nvidia geforce GO7600 256mb

I have a HP dv9244ea laptop with NVidia Go 7600 with 265 MB of RAM. I have installed jas 10.4.8 and i have update 10.4.9.

Now i have the Titan driver and QE/CI enabled. But i'havent any output signal in VGA-OUT of laptop. Can I enable it with "Diabolik's 10.4.9 NVidia Installer"?

Sorry for my bad english.
Bye!
David Gilmour

titan single monitor only : natit dual screens, laptop tho might not have dual it all depends

-DiaboliK

Was away for a few weeks from the sceneand tried this but... It is the worst ive ever had: Kernel panic...

Using Mac OS X 10.4.8. So tell me if it needs the latest kernel or other modificationhs/files....

hey guys, i've got a Geforce 7600 go with 512 MB VRAM. is there any chance to get it to work?
hacking the video bios as with desktop 512 mb cards is a giant risk as you can't connect any other grafics card to restore it on a laptop.

i currently got standart graphics output without any modification on JAS 10.4.8, but the content of windows does not refresh when scrolling or moving it. that is very annoying.

thanks for you help,
Tilman

Hi. I got a Core2duo laptop with go7600. I've tried alot of different drivers, but can't get my laptop to work with my external lcd monitor (only vga, no dvi). I get QE/CI to work with the dual v.02 driver, but both v.01 & the new "natit for 7600go only" I only get black screen after booting (after the apple logo). I installed the "7600 only" on 10.4.8, should I upgrade to 10.4.9 first ?
If anyone have a solution i'd be super-happy . I'm a mac-noob too.

Hey I got 7600go,

I installed DiaboliK's Natit for 7600Go, but my problem is, the Colors are not complete.

It's like when you open MSPaint, paste an Image, then save it as BMP, the gradients are not SMOOTH.

You will see curve lines on images with gradients. T_T

btw, It's QE/CI supported.

is the driver compatible with GeForce Go6200/6400? can i mod it for 6200 by editing the hex string in Info.plist

I've tried all of your drivers, but none is working...
I have a Sony Vaio with geforce go 7600 128 Mb, all natit works only on a external monitor....
I'm in real pain, if you have any idea please let us know.

Cheers

Me too

yep. probably

As far as I know, not one vaio user in combination with an nvidia got his LCD working.. too bad because that's the only thing that keeps me back from using OSX...

You can still use 10.4.7 with macvidia driver, works ok for me.... but still not 100%

Yeah, used it in the past!

But as long as I don't get QE/CI and full resolution support I won't step over to OSX!

I'm having the feeling that development on any nvidia drivers has been quit these days ...

Gotoh over at OSx86 forums (formerly MacVidia) is now working on a fix for most NVidia FX Go laptops. He calls it NVInjectGo.kext. I have a lot of confidence in what he's doing and he's a big contributor. I have an HP ZD7000 with a Go5600 chip that I've really wanted to get working fully. Maybe it's going to happen. Let's hope so.

Thanks pacis !
we've made some nice progress today thanks to maxoid at OSx86scene / MacVidia.
He tried different NVCAP values and now dual display on laptops which did not support it with previous NATIT/TITAN (and clones)
I believe testing different NVCAP will eventually fix the internal display problem for other laptops with NVIDA cards !

We all hope so...
Good luck

Thanks Dev's

Would be great if you release something. I have QE/CI on 32meg Nvidia 5200go but only on external LCD. Toshiba M30 id 0x032410de

any news on vaio problems? I got a FE41Z vaio with a t7200 2gb and 7600go. it's a little monster but I can't use osx.....yet. I tried a lot of installer and iso's..... nothing

update: I managed to recognize the video card but no QE or CI and resolution neither......what can I do?

goldrake : can you recognize the card and have full resolution on your internal lcd display?
I am fighting too with nvidia natit/titan installers but no way to go . It works on external display (no QE/CI btw) but no on internal lcd display. Please explain better what you mean with what you said in recognizing video card.
Thanks
Mal

Got a Zepto 6214w with a 7600Go with 512mb ram.
I really don't wanna try flashing it either. (besides, nvflash wont even read the bios off it, for some weird reason. Tells me it doesn't recognize the eeprom).
Anyways, found a post from Diabolik, saying that you didn't HAVE to flash.
you could just edit the iopcifamily.kext.
However, I think I need a file called "iopci.patch" for that, and I can't find that anywhere.
Anybody got a hint as where I can find it?

manmal: unfortunately no! only 1024x768 and no qe and ci.....I'm pissed!

I tryed with leo....and nvinject for leo.....same black screen........it's so sad!!

EDIT!!

with last nvinject for leo I have external monitor up and running... 1280x1024 with qe and ci !!!

xbench scores 109 with disk test...and our disk is 4200rpm......

BIG NEWS...now....we need internal!!!

p.s. the external is connected in vga, there a strange thing...I set 60hz and the image is a bit larger of the screen, if I correct manually the clock to 50 via lcd's panel control is ok....maybe it helps....

I have similar system, but i have problems installing 10.4.8 to 10.4.10. And i need a clue why this doesnt work :/

My specs:
MSI Megabook M677-014
AMD Turion 64 X2 TL-52
2GB DDR2-667 Dualchannel
nVidia nForce 410 chipset
100GB 5400rpm SATA disk
Realtek HDA ALC861
Realtek Gbit LAN
Ralink WLAN 802.11g

---

Anyone know wich release i should use to get my system up and running ? Ive been trying alot lately, but no luck so far.

tried with cpus=2 -v and it loads till 'Started CPU 01' and i have waited for it for about 2 hours, to make sure it doesnt get past that, but no luck. :/

Hi;
I need some help for my osx installation. I have Toshiba A100-289 laptop with GF 7600 go graphic card.

1- I can't find any solution for external display (didn't work). Internal display works great with Natit. I use Natit dual drivers as also and failed.

2- I can't change my LCD brightness with FN keys because of this my battery finishes very quickly.

Regards

Whats the 7600 go? I have an 7600gs 256mb pcie..

Anyone got the Nvidia 7600 Go working on a vaio?