Unfortunately - not.
Only SPDIF out added (which is useless for me anyway).

hey if you want mute and other things to work for 9200 . here the kext for it


use kext helper to install it .

Thanks, mate!
This is funny, but even we have identical laptops - they behave differently.
I mean - with your kexts i GOT mute, but my right headphones channel disappeared.

With my old kexts - both channels are OK, but no mute.

And in both cases - internal speaker still audible, even when i plug headphones in. And line-in/mic-in still not working (always works internal mic).

This is, of course, not the thread, where to discuss sound problems but i really appreciate you for your help.

Somebody have this kext (BCM5787M) : http://forum.insanelymac.com/index.php?s=&...st&p=903347 working but with hardcoded mac, this works fine but with some routers others not.

Marvellous ! Now the Broadcom NetXtreme Gigabit BCM5752, of ven id 14e4 and dev id 1600, is fully supported in my HP Compaq dx7200.

Thanks for the attachment.

Notebook Dell M6300 Bios A10

BROADCOM NEXTREME 57XX BCM5756ME A0 Gigabit 10/100/1000


Vendor: 14E4
Device ID: 1674

Here it is the magic kext for you!!! You can use DHCP or Manual IP configuration with MAC Address Assigned.

P.S.
Thanks a lot to this wonderful forum and all people involved

Thank you to all involved in getting the 5752 (0x1600) working!

Any progress with the 5754 (0x167a)?

I've got a Dell Precision 390 that uses that onboard NIC, and I'm happy to help with any testing/development if necessary... I just don't know where to begin starting from scratch.

Tim here it is mine modded for you, try it and let me know if it's ok

Put it in /System/Library/Extensions, remember to repair permissions... as always but you know it. Do you know it? lol

Hi,
I've got a dell studio with a Broadcom NetLink BCM5784M Gigabit Ethernet PCIe [14e4 : 1698], do you think one of the patch could make it work ?
Thanks very much

I've made it for you try and give feedback if it's ok.


P.S.
Put it in /System/Library/Extensions, remember to repair permissions...

Thank you,
I installed it with kexthelper but i didn't have the time to repair permission, the system freezes with a grey screen, may be i shouldn't use Kexthelper ?

Press F8 at start and put -v -s check the file system and mount it, repair permissions manually with chmod and chown remove kextcache and restart if it fails, you are not lucky remove the kext and you will be fine but without ETHERNET I'm sorry.

I'll do that this evening, but as a good noob it will take me time...
Thank you again , i'll tell you if it's OK as soon as possible

It was impossible to reboot in any mode, so i repaired permissions with the instal dvd disk utility but it didn't make it work to reboot... I wonder if the problem can come from conflict with another broadcom patch i did install (BCM 43xx) to run airport

I have a Dell d610 that I have for the most part working . My wireless will work but only if my router is un-secured.

I need a Broadcom NetLink BCM57XX Gigabit Ethernet PCIe [14e4 : 1677]

Does anyone know of a working one ?

I tried the driver by Eternal Empty and is crashed my system.

Thanks in Advance.

Jeff

First, I feel sorry about my kext crashed your system.

for 1677, before you use it, you perhaps want to modify the info.split array lines first, it is possible to to make it work by just few small changes or you may event don't need to do any changes ...

but you need to add your 1677 into the array list first. by using pure TEXTEDITOR only.

crash is very likely that the system has found the hardware by the ID is not existed for the system to register, that is why ..

anyway ..good luck, if I have 1677 with me now .I will do one for you to test, sadly ..I don't have one with me .

Hardcoding the MacAddress require the rewrite of the GetHardwareAddress function, the other kext for 5787m unluckly don't work on my pc, so i can't try, but here is my mod:

0002E90E: 55 89 E5 8B│55 08 8B 4D│0C B8 BA 00│00 00 90 90
0002E91E: 88 01 B8 AD│00 00 00 90│90 88 41 01│B8 F0 00 00
0002E92E: 00 90 90 88│41 02 B8 0D│00 00 00 90│90 88 41 03
0002E93E: B8 BA 00 00│00 90 90 88│41 04 B8 AD│00 00 00 90
0002E94E: 90 88 41 05│31 C0 C9 C3│90 90 90 90│90 90 90 90

if someone want to try,he has just to open the kext with an hexeditor then replace the bytes at the 2e90e hex
with these, values in bold are the macaddress

this is the asm code, if someone want to see how it works

0002E90E: 55 push ebp
0002E90F: 89E5 mov ebp,esp
0002E911: 8B5508 mov edx,[ebp][08]
0002E914: 8B4D0C mov ecx,[ebp][0C]
0002E917: B8BA000000 mov eax,0000000BA ; MAC 1ST BYTE
0002E91C: 90 nop
0002E91D: 90 nop
0002E91E: 8801 mov [ecx],al
0002E920: B8AD000000 mov eax,0000000AD ; MAC 2DN BYTE
0002E925: 90 nop
0002E926: 90 nop
0002E927: 884101 mov [ecx][01],al
0002E92A: B8F0000000 mov eax,0000000F0 ; MAC 3TH BYTE
0002E92F: 90 nop
0002E930: 90 nop
0002E931: 884102 mov [ecx][02],al
0002E934: B80D000000 mov eax,00000000D ; MAC 4TH BYTE
0002E939: 90 nop
0002E93A: 90 nop
0002E93B: 884103 mov [ecx][03],al
0002E93E: B8BA000000 mov eax,0000000BA ;MAC 5TH BYTE
0002E943: 90 nop
0002E944: 90 nop
0002E945: 884104 mov [ecx][04],al
0002E948: B8AD000000 mov eax,0000000AD ;MAC 6TH BYTE
0002E94D: 90 nop
0002E94E: 90 nop
0002E94F: 884105 mov [ecx][05],al
0002E952: 31C0 xor eax,eax
0002E954: C9 leave
0002E955: C3 retn
0002E956: 90 nop
0002E957: 90 nop
0002E958: 90 nop
0002E959: 90 nop
0002E95A: 90 nop
0002E95B: 90 nop
0002E95C: 90 nop
0002E95D: 90 nop


it sucks i know, i've left many nops to have space for progressive mods....

Thanks for the update. I hope I did not offend you, It was not your fault, just the driver from your update caused my system to crash ( not boot up). I just re-installed the os and I am fine again. I did happen to have an old driver that I did not think would work and I installed it and it did. so I know have a 100% working OSX Dell D610. I will post my kext files in a new Posting along with the steps I took to get the video, cdrom, wireless, lan working.

Jeff

No, not at all, I can live with that .. haha


as I don't expect the kext can do all the job as what god can.

BUT, I DO FEEL good to know that you have all the parts working ...



ps.( god can be helpless sometimes too...um ..most of time ..um ..when the time you need him the most... ya ..so ...he only need you when you have time to go to church on sunday and donate your pocket money or 1/10 or 1/6? of your total income ... .. haha )

Can somebody help me install the necessary drivers for Broadcom NetXtreme Gigabith Ethernet?? Model: BCM5750A1... Please help me. I read on the first page of this post that there are some drivers for my network card (thinhead's post).. But the link in the post is dead... Please help me.. THANKS IN ADVANCE

Hi GeniusAction

Do you help me ?

My card in machine is broadcom 5755 (chipset: intel 5400) 14e4, 167B.
Do you make a kext for this?

I suffer for a long time with this.

No love for BCM5755 yet? I've tried using and editing a few of the AppleBCM kexts without any luck (on a D630).

It isn`t good news.

Can any of these patches apply for the Dell D420? I am running 10.5.5 on d420 and the only problems I have left to fix are sound, screen wake from sleep and built in ethernet.

Thanks

Specify VenID & DevID, pls.

I am working on it, unfortunetly OSX doesn't list the vendor id and device id for me. I have to install windows to get it.

Don't need to.
Just install attached package. And then, go to Terminal and enter "lspci -nn" w/o quotes.


You'll see something like this:
.......
9:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
.......

In my case – all we need is [14e4:1600]

It´s not necessary, only boot your machine with linux live cd (Knoppix, pclinux, slax ...) and run the next command in a terminal window: lspci or better idea install pci utils for mac os x.

I do not understand it, why only this it an is not going normally, the others works with this...

Yeah I wish I knew

Here is my vendor / Device ID taken from Linux;



I've tried editting the BCM5701 and BCM5751 kexts but the best I get is a warning at startup saying the driver couldn't load correctly. I'm no pro so I could be missing something, but I don't think so. Here is basically what I do;

-Edit the Info.plist to include my Vendor / Device ID
-Copy in the edited kext, authenticate, replace
-(sometimes I delete the other BCM kexts just to be sure)
-Edit IONetworkingfamily.kext (or just add the edited BCM Kext to the package)
-Open disk util and repair permissions
-Reboot

This hasn't worked for me. Is there any D630 user out there with BCM5755M LAN that DOES work? That would quickly settle the matter.

I tried this, but don`t working.

I received this message from Consol:
Oct 15 17:50:34 localhost bootlog[35]: BOOT_TIME: 1224085822 0
Oct 15 17:50:34 localhost rpc.statd[17]: statd.notify - no notifications needed
Oct 15 17:50:34 localhost DirectoryService[31]: Launched version 5.5 (v514.23)
Oct 15 17:50:34 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[22]: Login Window Application Started
Oct 15 17:50:34 localhost DirectoryService[31]: WARNING - dsTouch: file was asked to be opened </var/run/.DSRunningSP1>: (File exists)
Oct 15 17:50:35 localhost kernel[0]: BCM5751Enet: Ethernet address 00:00:00:00:00:00
Oct 15 17:50:35 localhost mDNSResponder mDNSResponder-176.2 (Aug 15 2008 14:58:54)[21]: starting
Oct 15 17:50:36 localhost org.ntp.ntpd[14]: Error : nodename nor servname provided, or not known
Oct 15 17:50:36 localhost ntpdate[71]: can't find host time.euro.apple.com
Oct 15 17:50:36 localhost ntpdate[71]: no servers can be used, exiting
Oct 15 17:50:37 levips-macpro31 configd[33]: setting hostname to "levips-macpro31.local"
Oct 15 17:50:37 levips-macpro31 /usr/sbin/ocspd[78]: starting
Oct 15 17:50:37 levips-macpro31 mDNSResponder[21]: WARNING: sandbox_init error Could not set Mach lookup policy for service com.apple.bsd.dirhelper err=1100Could not set Mach lookup policy for service com.apple.distributed_notifications.2 err=1100Could not set Mach lookup policy for service com.apple.ocspd err=1100Could not set Mach lookup policy for service com.apple.mDNSResponderHelper err=1100Could not set Mach lookup policy for service com.apple.SecurityServer err=1100Could not set Mach lookup policy for service com.apple.SystemConfiguration.configd er


This says something to you ?

Unfortunately it doesn't. I'm not savvy enough to use any of that information to move forward, sorry. We'll both have to wait for someone else to work on it.

haimon, anomaly

I'll try to make a kext for this chip (by patching my own).

So, here it is: 0x14e4:0x1673

How to install:
- remove all occurrences of AppleBCM5751Ethernet.kext from both /System/Library/Extensions and /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins
- extract attached .zip anywhere (let's say - to the Desktop) and make sure this is the only file, starting with the "AppleB"
- in terminal:
sudo -s
<root password>
cp -r -v ~Desktop/AppleB* /S*/L*/E*/IONet*/C*/Plug*/
rm -v /S*/L*/E*.mke*
diskutil repairpermissions /
reboot

Then boot with the "-v" switch and post here all occurrencies with the "AppleBCM5751Ethernet"

Update: this is only a HACK. No warranties then.
And DON'T FORGET TO BACK UP EVERYTHING YOU MODIFY!!!

No need, it works xP xP xP xP

I followed the directions and I've got working LAN luls. Thanks.

From Windows:

PCI\VEN_14E4&DEV_1600&CC_0200

so VenID = 14E4
DevID = 1600

Hardware Description: Broadcom NetXtreme 57xx Gigabit Controller

Thanks

This is BCM5752. My D620 has it onboard, so try this link


Hope it helps.

Hi

i put it my extensions folder (no change info.plist), and ethernet card show in system preference.
I look in details, this show the real mac address, dhcp and manual ip don`t working

Do you help my ?
VenID: 14e4
DeviceID: 167b

Attached kext for 0x14e4:0x167b
Try it and post reply.

I tried it.
I see the network card with correct MAC Address in system preferences, but not working (i tried DHCP and Manual IP).
MenuMeter show this card only 10Mbit speed.

What can i do?

System log:
Oct 16 15:25:07 localhost rpc.statd[34]: statd.notify - no notifications needed
Oct 16 15:25:07 localhost fseventsd[43]: bumping event counter to: 0x1378ceb (current 0x0) from log file '0000000001243f50'
Oct 16 15:25:07 localhost DirectoryService[48]: Launched version 5.5 (v514.23)
Oct 16 15:25:07 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[39]: Login Window Application Started
Oct 16 15:25:08 localhost kernel[0]: BCM5751Enet: Ethernet address 00:1c:c4:ae:xx:xx
Oct 16 15:25:08 localhost mDNSResponder mDNSResponder-176.2 (Aug 15 2008 14:58:54)[38]: starting
Oct 16 15:25:10 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 resetAdapter - FTQ initialization failed
Oct 16 15:25:10 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 wakeUp - reset adapter failed
Oct 16 15:25:10 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 enable - failed
Oct 16 15:25:10 localhost /usr/sbin/ocspd[71]: starting
Oct 16 15:25:11 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 resetAdapter - FTQ initialization failed
Oct 16 15:25:11 localhost configd[50]: arp_client_transmit(en0) failed, Network is down (50)
Oct 16 15:25:11 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 wakeUp - reset adapter failed
Oct 16 15:25:11 localhost mDNSResponder[38]: WARNING: sandbox_init error Could not set Mach lookup policy for service com.apple.bsd.dirhelper err=1100Could not set Mach lookup policy for service com.apple.distributed_notifications.2 err=1100Could not set Mach lookup policy for service com.apple.ocspd err=1100Could not set Mach lookup policy for service com.apple.mDNSResponderHelper err=1100Could not set Mach lookup policy for service com.apple.SecurityServer err=1100Could not set Mach lookup policy for service com.apple.SystemConfiguration.configd er
Oct 16 15:25:11 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 enable - failed
Oct 16 15:25:11 localhost configd[50]: MANUAL en0: arp probe failed, arp_client_transmit(en0) failed, Network is down (50)
Oct 16 15:25:14 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 resetAdapter - FTQ initialization failed
Oct 16 15:25:14 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 wakeUp - reset adapter failed
Oct 16 15:25:14 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 enable - failed
Oct 16 15:25:14 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 resetAdapter - FTQ initialization failed
Oct 16 15:25:14 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 wakeUp - reset adapter failed
Oct 16 15:25:14 localhost kernel[0]: AppleBCM5751Ethernet: 0 0 enable - failed
Oct 16 15:25:14 levips-macpro31 configd[50]: setting hostname to "levips-macpro31.local"
Oct 16 15:25:34 levips-macpro31 loginwindow[39]: Login Window Started Security Agent
Oct 16 15:25:35 levips-macpro31 authorizationhost[98]: MechanismInvoke 0x125d50 retainCount 2
Oct 16 15:25:35 levips-macpro31 SecurityAgent[99]: MechanismInvoke 0x1015f0 retainCount 1
Oct 16 15:25:35 levips-macpro31 SecurityAgent[99]: MechanismDestroy 0x1015f0 retainCount 1
Oct 16 15:25:35 levips-macpro31 loginwindow[39]: Login Window - Returned from Security Agent
Oct 16 15:25:35 levips-macpro31 authorizationhost[98]: MechanismDestroy 0x125d50 retainCount 2
Oct 16 15:25:35 levips-macpro31 loginwindow[39]: USER_PROCESS: 39 console
Oct 16 15:25:35 levips-macpro31 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[95]): Exited: Terminated
Oct 16 15:25:36 levips-macpro31 /System/Library/CoreServices/coreservicesd[59]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(LeviP's Public Folder) returned -14135
Oct 16 15:25:36 levips-macpro31 SystemUIServer[111]: \n MenuCracker\n see http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menus. Ignore the failure message that follow.
Oct 16 15:25:36 levips-macpro31 SystemUIServer[111]: failed to load Menu Extra: NSBundle </Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuCracker.menu> (loaded)
Oct 16 15:25:36 levips-macpro31 SystemUIServer[111]: MenuCracker: Loading 'MenuMeterNetExtra'.
Oct 16 15:25:36 levips-macpro31 WindowServer[63]: CGXRestoreCredentials: seteuid() failed; errno 1; Session 256, EUID 88, old UID 88, request UID 88
Oct 16 15:25:36 levips-macpro31 SystemUIServer[111]: MenuMeterNet loaded.
Oct 16 15:25:36 levips-macpro31 SystemUIServer[111]: MenuCracker: Loading 'MenuMeterCPUExtra'.
Oct 16 15:25:36 levips-macpro31 SystemUIServer[111]: MenuMeterCPU loaded.
Oct 16 15:25:43 levips-macpro31 kextd[10]: writing kernel link data to /var/run/mach.sym
Oct 16 15:26:38 levips-macpro31 org.ntp.ntpd[31]: Error : nodename nor servname provided, or not known
Oct 16 15:26:38 levips-macpro31 ntpdate[122]: can't find host time.euro.apple.com
Oct 16 15:26:38 levips-macpro31 ntpdate[122]: no servers can be used, exiting
Oct 16 15:26:54 levips-macpro31 kernel[0]: System Sleep
Oct 16 15:27:02 levips-macpro31 kernel[0]: System Wake
Oct 16 15:27:02 levips-macpro31 /System/Library/CoreServices/backupd[127]: Starting standard backup
Oct 16 15:27:02 levips-macpro31 /System/Library/CoreServices/backupd[127]: Volume at path /Volumes/TM does not appear to be the correct backup volume for this computer. (Cookies do not match)
Oct 16 15:27:07 levips-macpro31 /System/Library/CoreServices/backupd[127]: Backup failed with error: 18
Oct 16 15:29:16 levips-macpro31 fseventsd[43]: log dir: /Volumes/AGFA/.fseventsd getting new uuid: 742E0954-068E-46C8-87B8-EF5F7947BD4C
Oct 16 15:29:16 levips-macpro31 /System/Library/CoreServices/backupd[138]: Backup requested due to disk attach
Oct 16 15:29:16 levips-macpro31 /System/Library/CoreServices/backupd[138]: Starting standard backup
Oct 16 15:29:16 levips-macpro31 /System/Library/CoreServices/backupd[138]: Volume at path /Volumes/TM does not appear to be the correct backup volume for this computer. (Cookies do not match)
Oct 16 15:29:21 levips-macpro31 /System/Library/CoreServices/backupd[138]: Backup failed with error: 18

You did all steps described above?
Try to boot with -f switch

Yes I did all steps.
What is -f switch ?

I tried this, ther is not change.
What i should watching ?

Early here in the tread there was a zip file attached for BCM5701. This is how I got it working for BCM5750.

Instead of swapping the whole Kext, I opened the original Kext that was in the extension folder and just repacled the 2 files inside the Macos dir of the original kext that came with Kalyways 10.5.2 with those 2 from that zip..

One rebbot and it worked

Just an other host :
http://rapidshare.com/files/155160010/Appl...hernet.kext.zip




to be sure




hope it´s ok !






Here you can get you Intel 2200 Wirelles Working:

http://code.google.com/p/iwidarwin/

My LAN is Broadcom VEN 14E4 DEV 1693
I've tried to manualy add this into info.plist but it didn't work.
Can you please help me with setting it up?

I've managed to install the necessary drivers for my network card (Broadcom NetXtreme Gigabit Ethernet dev_1677). I've used the attached file provided by Nisa-it (many thanks) and the following terminal commands:

sudo -s
chown -R root:wheel /System/Library/Extensions/
cd /System/Library/Extensions/
chmod -R 755 AppleBCM5751Ethernet.kext
reboot

But now i have another problem... I am also using a router (a Gembird router i don't know the model name) and when i open safari it says that i don't have internet access. Under Network preferences I've entered the IP address, the subnet mask, and the router ip (note - i didn't enter anything for DNS server, because i didn't know what to enter). And in the network preferences it says connected for Ethernet... But i don't have internet access.. I can access my router through safari using my router ip address but i don't have internet access which i mostly need. So can you help me solve this problem??? I've also learned that i don't need to set up my MAC address because i am using a router (now it is set to all zeros 00:00:00:00 etc...). So, PLEASE HELP ME I REALLY NEED INTERNET ACCESS. THANKS!

You need to find out the IP for your DNS in order for your package to find the way out ..


I think you are very close solve your problem,

if you are able to get into your router's setting pages . you will be able to find your DNS information, or just give your ISP a call to find it out .. and also, normally ..ISP will have FAQ page will list their default DNS too ..


try that

have fun

EternalEmpty

I've solved my problem... As you said i found my DNS address in the settings of my router... THANKS now i can really enjoy leopard (Currently into leopard while writing this) Cheers

Hello Peter,

try to follow post #1 in the following link:

http://forum.insanelymac.com/index.php?sho...=127903&hl=

It works for me  - I also have BCM5787M.
Regards,

bozon42

I've got a BCM5784M (VEN_14E4 DEV_1698) LAN. Anyone got that working yet? If I edited the ID of the BCM5784M kext into that linked 5785M kext, would it work?

Just throwing some questions out here. Can anyone help?