*bump*

geforce 7300 GT 512MB. ROM flashing success but no CE/QI support.

help ?

I haven't seen or heard of any efforts to get 512MB AGP working under OS X.

On a side note, most of the time I get shadows for the windows as I move them. Or if I scroll within a window the contents of the window don't refresh. For example, say I have a Safari window open and I scroll down in the web page, the contents of the web page don't move only a small portion at the bottom scrolls. Or say I move the actual Safari window around, it blacks out and leaves a trail/shadow. Does anyone know if that's due to no CE/QI or is that an unrelated issue.

thought i'd throw in a wee thank you to everyone concerned.

i wasted weeks looking for a software solution for my asus 512mb pcie x16 en7600gs but today i took the leap.

flashed the bios and straight away it was recognised as 512mb under bios.



i had dual dvis,but no qe and ci.


from scratch i installed punk92 v1.9 10.5.2 installer using natit dual kext (nvinject didn't work for me)


had to delete nvdanv10,20,30, and 50,,then i deleted ALL strings in nvdanv40hal,nvdaresman and natit.kext,,and replaced them with devid 0x039210de.

the only other edit was geforce.kext which didn't like my device id on its own,,,so i left the preexisting id's and changed the first one in the list to my id.

this caused kernel panic at permissions repair,,but reboot yeilded full QE and CI.


thanks again folks,,,hope this helps someone else.

Hi. Does this work for the nVidia 7600GT 512MB? I have no QE or CI. If you can send me the geforce.kext; since I deleted mine due to the black screen.

UPDATE: I re-installed Kalayway for the 5th time and applied Nvidia V2.0 by Punk and now I have full QE/CI on my nVidia 7600GT 512MB! The DVD Player now plays! I did the 512MB MOD on my 7600GT. If anyone want the modified ROM, here is my nVidia GeForce 7600GT with 512MB:

http://rapidshare.com/files/106018360/7600GT_512MB.ROM

good morning!

now i've patched successfully my sparkle 7300 gt 512mb, system recognize all the 512mb (before patch only 256mb) but not QE/CI and signed as "Display", not 7300!!!

i've tried with titan.kext and repair...but i've seen only a black screen!!! uff!!!
what can i do?

I am considering buying a laptop which will have a NVIDIA 8600 GT with 512 RAM. How can I find out if I can flash the card's BIOS or not?

Thanks for this advice. Some weeks ago I flashed my MSI 7900GTO 512MB but never actually tried to get QE/CI working. I was primarily concerned about the low resultion which got fixed with the flashing. Now I'm on Leo4allv3 updated to 10.5.3. After the installation of nvkush and then later the removal of nvinject i got full qe/ci support.

Now if only I could burn, use my via card or output sound via coax from my karajan 7.1 module...

Hi guys!

I have an EN7950GT from ASUS that the darwin bootloader can not load corect.
I downloaded Nibitor and then went to tools-->read bios-->read into nibitor
After the card been read I choosed save bios in order to save my graphics card
bios as it is at the moment before I change anything.
Have I done it correct?
After that do I need a floppy drive or can flash my card using a cd or a flash memory stick?


Thanks for your time!

Hey guys,

My BFG 6800 GT OC AGP just took a dump on me, so I did an RMA on it. BFG sent me back a new 7600 GS 512 AGP. It looks like there really isn't any way for me to get the Darwin bootloader to properly detect my card according to this forum since it is an AGP card. Is this still the case? Does anyone have any new information on this?

Stats
Processor: Intel 3.0 GHz Pentium 4
Bus Speed: 800MHz
Memory: 3Gb DDR SDRAM
Mobo: ASUS P4P800 SE
Lan: Marvell Yukon 88E8001 Gigabit Onboard
Graphics: BFG 7600 GS 512Mb AGP