I upgraded to 10.4.9 and now the sleep works (or at least I think...)
At the moment I didn't hack to have the current status battery on the menu bar So I don't know if this has some conseguences...


However it is very fast so I'm not sure about the effective sleep status.
In the log I have only:
System Sleep
System Wake

I just reinstalled 10.4.8 on my Hack and the JaS 10.4.8 was sleeping perfectly fine on my machine. But as soon as I enabled Titan, it stopped sleeping. The screen would just remain frozen.


I have tried NvidiaEFI and that also causes the freeze on boot. Maybe its my video card.

I can't sleep with mine.. It's basically a stock jas 10.4.8 ppf1 and ppf2 with the jas combo update to 10.4.9


any ideas how to get it to work?


Thanks,

David

Anyone with an Asus P5W-DH and working sleep ?

Mm I almost got sleep workin .
The desk comes back, but its not cotrollable, and sometimes a blue screen shows up..

I installed ACPICPUThrottler to manage this.
In the bios you have repost on vga disabled, acpi on 2.0 and Apic enabled.

Help is appriciated !

good work Kaspers - keep it up

I've noticed that my notebook sleeps fine when sleep is selected from the apple menu and there is a CD in the tray. Resumes with everything working.


Specs:
Mac OS X 10.4.7 (Jas's 10.4.6 install disk, then his 10.4.7 update), ACPICPUThrottle,
Dell Inspiron 6000, Pentium M 1.6 GHz (SSE2), 512 M ram, 80 G SATA HDD, GMA 915 Truemobile 1450
the CD drive might be a Toshiba CD R/W & DVD ROM...I'm not sure

and it doesnt work without a cd in the tray? thats insane

With the latest S8 from prasys my system goes back to the desktop everytime, but frozen.
When I replug my USB keyboard & mouse, my mouse begins to work.

I can move all over the screen, but can't click on anything.

Thats basicly the main problem at the moment...
I've enabled speedstep and Enhanced C1.

Hi, I tried 1046 on my D945G and have the same issue than with 1048/49...

but didn't get this issue on D915G mobo even with 1048/49

perhaps I could clone partition from 915 to 945 to see what happend...

just a detail I think but on D915 computer says ACPI platform
and on D945 it says ADP2.1....

there's not a Guru who gets this issue ???


http://forum.insanelymac.com/index.php?sho...70&hl=sleep

Ok, I have some information which may be helpful. I feel like I'm getting pretty close.
Hardware: HP Pavilion dv1610us (dv1000 series) laptop
GMA 900 (with pin 1-6 and 2-12 shorted VGA dongle to correct blue screen on bootup issue)
i915 chipset
Intel Celeron M processor (SSE2 unfortunately)
Broadcom 4318 wireless chipset (works with WirelessSupport.pkg from JaS 10.4.6)

Sleep/wake worked fine in 10.4.6 and 10.4.7, both JaS releases, although there was a ~20 sec delay upon waking up before computer was usable. But consistent & reliable behavior.

10.4.8 JaS, semthex sse2/sse3 kernel. Computer sleeps, but upon wake, some hardware turns on, but display and wireless never turn on. Frozen, must reboot.

Updated to 10.4.9 with JaS SSE3-only combo updater, then immediately replaced /mach_kernel with 10.4.9 SSE2 kernel from IRC. Same sleep/wake behavior as 10.4.8.

Now for the interesting part. I took /System/Library/Extensions/AppleACPIPlatform.kext from 10.4.6 (the working sleep version) and put it in 10.4.9. Fixed permissions, rebooted, everything booted up fine. Sleeps fine, wakes up, display turns on, wireless turns on. However, system is initially frozen, and takes ~1-2 minutes to become responsive again (the system boots up in about 30 seconds, so this isn't too helpful!). If I sleep and wake the computer again, it takes roughly 20 minutes for the system to unfreeze, but it always eventually unfreezes. During the delay the trackpad is also working and I can move the cursor. However, after a while, during the freeze, the beach-ball of death appears, and it is not even spinning (yes, a FROZEN beach-ball of death!). If I reboot, the cycle starts again, 1-2 minutes on the first sleep, 20 minutes on the second sleep for a usable system.

This would indicate that AppleACPIPlatform.kext is key in getting this working. However its interaction with the kernel, or perhaps other kexts is resulting in this massive delay. I tried looking for evidence of a kernel panic upon wake (/Library/log/panic.log wasn't there) but couldn't find anything.

Anyone has comments/ideas on this?

lighthouze: thanks for posting... that does sound interesting! i might give the 10.4.6 version a try.

I would be interested to know your results. I also forgot to mention that, since semthex's 10.4.8 kernel also works in 10.4.9, I replaced the IRC 10.4.9 kernel with the 10.4.8 kernel. The desired behavior with the 10.4.6 AppleACPIPlatform.kext did NOT occur with this kernel-it slept, and upon wake, the screen and wireless refused to turn on. Replace the IRC 10.4.9 kernel and you're back in business.

So kernel is important too, and this is why I think something needs to change in the 10.4.9 kernel before we can get real, ultra-fast wake-up, perhaps without even changing anything in the ACPI kext.

i tried the 10.4.6 version and it b0rked my install... :/

gonna install 10.4.10 at some point... ho hum.

So is it safe to say that with a Apple Cinema Display, I should be able to wake from sleep on my Dellcintosh?

Hi there,
just wanted to report that sleep (S3) works again after replacing PowerManagement.bundle and AppleSMBIOS.kext from 10.4.3.
All USB devices are working (after repl AppleSMBIOS) + NIC gets activated again after sleep (PM.bundle)

eberts, that's great!

Could you upload those .kexts for us to try them?


Thank you!

Great find, could you please upload the PM-bundle and kext from 10.4.3? Amazing that it works, since the combination of GMA950 (difficult to wake up display) and no AHCI-harddrive sound problematic for getting sleep to work.

Sorry guys, I don't know where to upload the files but you can find them on the Jas DVD (AppleSMBIOS.kext 1.0.6) and here:
http://forum.insanelymac.com/index.php?sho...PowerManagement (PowerManagement.bundle)

Update it to megaupload, only have to select the file and press Upload!

Thanks!

ok, done

http://www.megaupload.com/de/?d=2V3EU5J4

Will try this right away as my computer goes to sleep and just restarts when I move the mouse. Thanks eberts. Will let everyone know how it worked for me!

Tried it but it didn't worked for me. Checking on my system info, I found that my computer doesn't detect my synchmaster 914v. This might be why I get a full restart:

Intel GMA 950:

Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x2772
Revision ID: 0x0002
Displays:
Display:
Status: No display connected
SyncMaster:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported

No luck with it, which graphics adapter/kext are you using.

Tried it on a Dell Inspiron E1505/6400 (GMA950). Successfully goes to sleep (powerlight fading), wakes up, but display stays black. Plugging in an external TFT didnt work.

I really need to get the display wakeup working to enable the dual core workaround. So far I can only run with one core, going to sleep and waking up would fix this.

I've tried and doesn't work for me, when I try to wake up, the computer restarts

I've never been able to get sleep working with my p5ld2-vw, e6400 and 7600gt, i don't know if its because the IDE hdd or what...

Thank you eberts anyway

Well here's what I've seen recently...

With my rig, i had a fully working sleep setup with JaS 10.4.6-7. It would wake, NIC, display, etc...all working. Then, I moved to 10.4.8 and lost the sleep feature. When the system would resume (if you call it that) it was basically rebooting the whole system. So sleep would kill all power and drives and they wouldn't even resume -- just booted from scratch.

In the past 48 hrs. I've tried 10.4.9 and 10.4.10 (without any additional tweaks/kexts) and knowing that sleep's always seem to have been an issue past x.4.8, I tried it in both...both times, the systems power suspended, then when I repowered the rig, I got the boot screen (black) and had the 5 sec countdown timer, then hit enter and as it would go...my system literally (under both 9 and 10 (with 8.9.1 and 8.10.1) wouldn't even boot!

I may try this weekend to keep playing with the x.4.9 disc with ACPI kexts and see if I get anywhere.

Did you successfully manage to wake the display (GMA950) when using 10.4.6-7? In your sig, it says GMA950 (disabled) so I am not sure which GFX chip you were using in 10.4.6-7.

munky,

I'm sorry my 10.4.6 trick didn't work for you (and messed up your install). Oh well. Good luck, this is a tough problem, and seems to be heavily hardware dependent.

-lighthouze

i had Uphuck 1.3 installed, the sleep doesn't work either.

quasar_x,

I've never really used the GMA950. I've always had the X1600XT Silent running and it was the card that in x.4.6-7 that would sleep and resume like a champ. Then somewhere in x.4.8, it was lost and hasn't worked the same since (which is a real bummer).

FYI, using Uphuck's 1.3 as well.

Take a look at my signature (red color are the sleep problems)
Any ideas ?

S3 works ok, but USB key and mouse are dead.

Using PS2 mouse and PS2 keyboard helps but unfortunately sometimes they just doesn't boot with system
Let's say 1 in a 5 times. (system boots but PS2 keys and mouse are unresponsive)

Well, I copied the 10.4.6-7 kext for 'AppleACPIPlatform' to my 10.4.9 install, repaired permissions, and rebooted...

I got that same damn black boot screen asking me which drive to boot from (hda1,0 or something similar) and sure enough, system still wouldn't boot.

there is something weird going on with sleep function...

Sometimes, after resuming, it just stays on "beach ball of death" instead of bringing desktop or asking for a password....
(LAN is working, (I can tell it by working ICQ), monitor/video is working (I see beach ball), usb mouse is working (I can move beach ball), usb keyboard is working too (I resumed computer by pressing a key)
Kernel / finder problems ???


sometimes it's working like it should...

I have bios set on S3.... S1 doesn't shut down fans but resumes ok everytime

Stander,

I updated from 10.4.8 to 10.4.10 and experienced the 'no sleep' issue. After seeing you set your bios to S3, I tried that and nothing changed. Then I wasn't sure where AppleSMBIOS.kext v. 1.0.6 was so I just copied the one from the latest 10.4.10 PKG and sure enough, after trying out the sleep, I got a blue screen with some jibberish so I just powered down and called it a night.

If my memory recalls correctly, I had my bios set to 'auto' (never really touched it) and with 10.4.6-7 and it did sleep properly. Ever since 10.4.8 though, this has been an issue.

How can you tell which version of AppleSMBIOS.kext it is?

Yes I can, but you can read it aswell, from my signature

I'm using AppleSMBIOS.kext version 1.0.6

Anyway it's strange here... usually when I left it sleeping for couple of hours (4-5 or more) i can wake it but there is no finder or desktop :/
Everything else works, but I can't do anything (exept moving the "beach ball" all over the black screen) Must restart it.

It looks like something is discharging over period of time...

And one more time... if I set S1 in Bios (power management setup) it resumes from sleep ok everytime... But unfortunately S1 leaves computer FANS running... so S1 isn't real deal...

guys, are we dealing with "sleep" or "safe sleep" here ?
First one is suspend to RAM, second one is suspend to HDD (Hibernation)

about MAC safe sleep
http://andrewescobar.com/archive/2005/11/1...sleep-your-mac/


Did anyone tried that safe sleep ?

Hello!

I've got my computer to sleep fine always, (S3 mode), but I have the problem of USB ports... I have to replug them once waken... any solution?

Thank you!

this is the solution, zztopzz "AppleSMBIOS.kext version 1.0.6"... have that problem before too
Search forum for that file, I uploaded it too here...

Hi!

I've tried with 1.0.6, Stander, but when I move the mouse to wake up, the screen keeps black....... ¬¬

Thank you anyway

anyone know what this error means?

my thinkpad t-60 sleeps finr but on wakeuo i get the following:

Error 0192: System Security - Embedded Security Hardware tamper detected" and get beeps

any thoughts on how to fix this?

this is the one thing keeping the ThinkBook from being 100%

ThinkBook T-60
Intel Centrino Duo (both cores working)
Intel 950 GMA (works perfectly)
AzaliaSound (works perfectly)
DVD Player (works perfectly)
Wireless (swapped intel for atheros mini-PCI - works perfectly)
Sleep (sleeps fine, just can't wake up)

you move the mouse ? are you kidding me ?
You must press the mouse button or any key on keyboard to wake computer.... it's not sleeping monitor in windows

Hi again,
I just found out that ApplePCIConfigurator.kext must be loaded for me to have usb after S3 sleep. That kext is not in all Combo Updates, so it's a quite old one. The ACPI related drivers which are currently loaded are:

ACPI_SMC_PlatformPlugin (2.7.1d6)
IOACPIFamily (1.2.0)
AppleACPIPlatform (1.0.10)
AppleACPIButtons (1.0.10)
AppleACPIPCI (1.0.10)
ApplePCIConfigurator (1.0.4)

The ApplePCIConfigurator.kext is in the attachment.

http://www.megaupload.com/?d=BOELWSGN


Addionately, I have to uncheck "Wake for Ethernet network administrator access" in System Preferences to have Ethernet after wake-up.

Hi there!

For me sleeping was ok with 10.4.8 and sem`8.8.1 yesterday i updated to 10.4.9 with 8.9.1 from netkas and sleeping (and awakeing) still is ok, but when i want to awake from monitor sleep i`ve the black screen what i think everything is working except video.
Can i anywhere disable monitor sleeping?
specs re in sig.
thx in adv

Since it's my first post i'll make it interesting

With Ebert's package, my bios (Asus) is detected by profiler. It's an A8N-Sli
However, cpu is reported at 3.7ghz (it's 3800+.. not correct)
Don't think its actually running at that speed

Anyway, with those kexts i can only sleep S1 not S3 (or S1+S3 in bios..) I must select S1 for it to work.
I went back to 10.4.10 kexts and S1 works too. Not S3

I don't know the difference between S1 and S3.. Can anyone explain ?

Also, i left powermanagement.bundle but it's not picked up. Guess i need the older kext combination for it to do anything ?

Still, happy to have sleep now on A8N it was the only thing bugging me.

i have the uphuck 10.4.9 1.4i osx86 installed and the sleep makes my monitor go black but i never see my power button go off or my status light go to "standby or sleep" (green when on and orange when sleep)
is that the same problem everybody else is having? of course nothing wakes it up i have to power off then power back on..
when i had JaS 10.4.7 installed it used to go to sleep (blink orange) then auto wake back up....

More info - if it helps.

My new build - Bad Axe 2, ASUS 7300GT - sleeps fine (S3 Deep sleep - monitor off / unit off ).

Running 10.4.10 - Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007

My only issue I have is that i cannot wake it via the USB mouse/keyboard.
I found it would wake if I plugged in any other USB device.
My input devices must be reset (unplugged/repluggged) manually.
It looks the USB ports are not being reset.

I've seen others mention these symptoms as well, but I believe not all Bad Axe users have this issue.

Nothing helpful I can find in the logs.

Sounds similar to other's USB problems posted here.

Ive got a LG P1 express (945) and the sleep works fine in 10.4.6, also the internal keyboard works after a sleep..? but when i tried 10.4.8 it doesnt wake up from sleep, and keyboard dont as well...

Sleep works fine on my Asus P5K-VM

hi my iPC is very strange (it does everything that shouldn't do)for exemple
e can boot mac os disk on a DVDrw and all sort of stupid things that
shouldn't do.


sleep is one of this things

i have a P4 2.53GHz SS2
a Asrock P4vm8oo
1GB ram
Nvidia 5500 256Mb AGP8x
250Gb Sata drive with OsX 10.4.10 and 8.9.1 kernel for SS2

so if i put the pc to Sleep it goes to sleep and when i push the power button the PC gets back on MacOsX
and i jusk have to wait a few sec. for my HD drives to boot up (like sleep mode on Windows)

Man i don't know it just works(and it wasn't just one time; i do it all the time; when i go to somewhere else i put it to sleep and i wake it and its ready to work) like windows vista and linux fedora (i do the same thing when i'm in those OSs


Oo

Can anyone send me this file (ApplePCIConfigurator)

I can't download from megauploader, it's not working. My hack is waking up from s3 sleep, but I need to plug in my usb mouse+keyboard when it wakes.

Drop me a PM. I'd really appreciate it!!

- Synaesthesia