you guys are great.
had osx running on my p5k for weeks without internet. now its working and I thank you so much.

you've made an austrian macosx fan very happy

Hey martin, I tried your advice to run the script automatically using sleepwatcher but it doesn't seem to work. do you know of any other ways to automate the script?

So... Heres the thing. Ive got iATKos v4i running quite nicely. I installed the L1 driver in v2i and it worked. However after reinstalling with v4i and installing the driver from the latest time its posted I can see the en0 and the correct Mac Address. However all I can get is an APIPA address. DHCP will not give me an address. Also when I set it manually I cannot connect to anything.

I can not download the file. Where can I find the file? There is no download link on this post.

Okay folks, so this is really weird. I admit I'm rather new to OSX but a networking newbie I am not. I have been trying to figure out why my network will not connect. So I decided to see if my card was even talking on the network. I ran Wireshark with a filter to capture on the MAC Address of my Attansic L1 on the OSX system. Turns out the card talks on the network just fine. For some reason Mac cannot read or apparently understand the network. The Attansic Card is sending data to the network. However, it will not respond to requests such as ping also it will not respond to handshake requests. I assume that it is sending data to the network and just not reading anything. Any ideas as to why this is happening are of course appreciated. Help fixing it even more so. Thanks for all the osX86 community has done thus far and keep on rollin' folks.

**UPDATE**
Just got even weirder. I installed Wireshark onto the system with the Attansic L1 in it. Loaded wireshark up and started caputuring. I was most amazed to see network traffic going both ways as well as the traffic on my general network. So I starting installing my apps, Adium, Fusion, and what not. Anyway as an after thought I closed out of wireshark and tried to check my email. It wouldn't load. So, out of curiosity I loaded up my Wireshark and started capturing again. Low and behold I got traffic. My email came through and all was well. Close Wireshark nothing works. Caputer with wireshark and my network works.... Any ideas? because Im at a loss...

Pleaseeee somebody give me a lan driver for attasic...i have leo4all instaled on my P5kpl mobo ...everything is working but the lan...give a link or send it to mariusco7915@yahoo.com
thanks

anyone with a p5e-vm using this patch finding that it crashes on every second wakeup?

Okay. Update 2. I got the card working without the need for the Wireshark workaround. I installed the debug version and it worked after reboot. So anyone have any ideas so I can use the release and not need to kill my Log Files?

Now that the attansic l1 is supported in iDENEB 10.5.5, where it works fine, can someone please tell a newbie like on me how I can get these drivers found, copied and configured from there to my kalaway 10.5.2 system?

Pls someone of you gurus assiste me!

create this driver for Attansic L2 please... in my motherboar i din't have slot for other LAN adapter...

Please help to find any worker kext\pkg. Or prompt as to adjust that what to be put at installation. Has tried to put 8 times - any does not work. Motherboard Asus P5Q Pro. iDeneb v1.3 10.5.5 for IntelAMD ( SSE2SSE3).

Click to view attachment

Click to view attachment

OSX86Tools - LSPCI:

02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0)

Many thanks.

Hi...

I'm new here and I was just wondering if there was any update to the driver? I just started my hackintosh project and if it would be cool to have someone point t the newest driver to me? I'm having a little trouble navigating the website since it's my very first time. Thanks in advance!

Cheers

Love you all guyz =]"

Finally I get it done w/ the .pkg file


My pc cfg


kw 10.5.2
Q6600
Asus P5k
HD29XT
DDR2 800 2GB


Love you =]"

Thank you!!!

Hi daemon, is there anyway to enable WOL on your driver? I am on the p5e-vm

Hey, I'm having Asus P5G-MX too but after install Kalyway 10.5.2 nothing work: no sound, no network, and I dont know if driver for Intel GMA950 worked or no.
Can you tell me how you choose in customize when installing Kalyway ?

thank you guys, great job. it's working on my P5K-SE (crossflashed to P5KR 0605 bios). thank you all

Please, I have mobo Asus P5Q with Attansic L1 Ethernet, vendor 1026x1969.
Need driver (kext) for this network card.

THANKS!!!

hi guys i have a long story about my hackintosh. seller installed mac os 10,4,10 then one day i tried to install maya 2008 n i saw a topic in this site it was telling that i need to change my ionetworkingfamily.kext file with the attached one to topic. i did this. (am i silly ehehehe). n now i havent internet n my motherboard is asus p5b attansicl1 ethernet. may anyone help me for the righteous driver? coz i couldnt understand which driver n how i need to install in this topic. thanks all. waiting reply soon. btw when i open comp its written that press shift+f10 ...... (i couldnt read here its flowing fast) rtl8111/8168 bla bla im not sure that my ethernet card is attansicl1 after this note. is there anyone can help me?

Hi!

First of all thanks a lot for all your engagement for developing that driver.

My problem:

i boot up osx 10.5.4 (based on kalyway 10.5.2 + 10.5.3 kalyway update) install the driver package (the installer) then click into the network settings -> it says theres a new network device, couple seconds later it works great! but then... when i reboot nothing happens...

the errors i figured out are the following:

can't get a connection to the hardware devince + can't get the mac address of it.

i've attached two pictures showing the errors


oh yeah, i've got an asus p5b-e motherboard... bios revision 1802

intel e6600 core2duo processor, 4x 2gb ddr2-800 modules, but i guess they don't matter much =)

In Everest it says Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller

Mac Adress: 00-18-F3-9D-7D-7F

Thanks for your help
Florian

I have the same problem--

I'm downloading iDeneb 10.5.5 install DVD

on the feature list it mentioned the attansic l1 driver, I'll try that, it might work. messed up my osx86 anyways by installing nvinject 0.2.1 for a 8800gts. the login window doesn't pop up anymore... neither does the os load at all, just see a blue wallpaper screen oder, when in safe mode, it shows the standard wallpaper for leo


I'll let you know as soon as i get the 10.5.5 installed.

I have Ideneb 1.3 too...

But you have to try if attansic work with network access by another Pc or mac...

what do you mean with trying if attansic works with network access by another pc or mac?

Look on boot with -v

Mac address trought SPI is Invalid...

mine also is Attansic L1

THANKS GUYS!!!!!!!


I finally have my onboard LAN working....

EDITED:

I can't use IONetworkingFamily.kext that is included in pkg because my TM stopped working. I installed my last working kext and my LAN is still working.
So I use combination of your pkg and attached IONetworkingFamily.kext


Click to view attachment

Kurva, to nikto nema schopny ovladac na sietovu kartu Attansic L1 integrovanu v doske ASUS P5Q ??? hmmm...

Installed driver via osx86tools autoinstall. Works fine. But makes kernel panic if there is no such network card, and driver installed.
I share same hdd with 2 hackintoshes, the main difference is network card - I have attansic l1 on one of them and some intel-based card on the other.
Intel-based driver works fine in case there is such card and when there isn't, and attansic driver has to be removed from extensions to boot machine with intel card to avoid kernel panic on booting.

hi ...
any idea how to get my onboard lan working on my Atheros AR8121/AR8113/AR8114 pci-e ethernet adapter on my ASUS P5QC mobo... thanks.... i am on iDeneb 10.5.5.

thanks in advance

hi Guy I have a big problem I like leopard put I kan't make work my atheros l2 on my asus p5gc-mx

can you help me ?

atheros l2
asus p5gc-mx
vendor 1969
device 2048

mac: leopard kalyway 1.5.2

tank's a lot

Is that Attansic driver working for Atheros LAN cards on P5Q Pro ??

does not look like it... i put the proper dev id in the plist...
when booting up i get a msg saying something not allowed mac addy SPI something...

and a few lines below i get a mac adress assigned... when checking sysprefs it shows connected...
but then internet does not work, pinging does not either...



i will get me a pci ethernet card today

though, not sure wich one to buy

Thank you, DaemonES!
Using your early xcode snapshot from page 1 of this thread
"AttansicL1Ethernet.zip ( 122.26K )" for my AMD box (10.5.2)
I copied from the subdir ./AttansicL1Ethernet/build/Release/
the AttansicL1Ethernet.kext folder to /System/Library/Extensions/
and immediately thereafter a window were popped up "found new..."
(or so, I can't remember me)
In "System Preferences -> Network" I activated the new "en0" with its defaults
and my Router-IP as "DNS-Server".
Since then my internet connection works without any faults.

This reply refers to "my AMD box" in my signature
AND my AttansicL1 chip refers to VEN:DEV = 1969:1048
The first attachment shows my 10.5.2 "About This Mac",
the 2nd my new iDeneb 10.5.5 one..

Thank You For Driver Work fine on Asus M3A setting by hand Velocity 100Mbps, Full-duplex, MTU=1500
You are my hero, Im patched various drivers on linux by hand but this freebsd makeme crazy

Greetings!

I just installed an iDeneb 1.3 10.5.5 and I have problems with the network adapter..

Motherboard: ASUS P5Q (Yes, it has the Attansic L1 Gigabit Ethernet Adapter)
CPU: Intel Core 2 Duo 8400 @ 3GHz
RAM: 2*2Gb Dual Channel Mushkin Performance
HDD: SATA-2 Samsung on ICH10

I found various versions of drivers but none of them seemed to work..

Can anyone post here a link for the driver that works with 10.5.5 ?
Thank you very, very much.

It looks like there is still no driver for P5Q series of mother boards LAN adapter.
Its an Atheros R8131 or something adapter.

I tried the last installer (after reading all pages searching for it, guys, a front page info would be nice ) in a Asus P5QC and the network didn't work. More information about this one would be great for anyone that has tryed this too.

Hello!

I've got an Asus P5KPL-CM Mainboard with an Atheros L1 Gigabit Ethernet Network Card.
I read this threat and downloaded the Attansic L1 kext file and changed the Device ID from 0x10481969 to 0x10261969 because Everest and other Diagnostic Programs told me that this is the device ID (1969-1026)
after changing the device ID in info.plist i installed the kext with kexthelper. then I restarted and nothing happens.
the NIC won't be identified!

Whats the problem on this configuration?
plz help me


*UPDATE*
After updating the IONetworkingFamily.kext finally my Onboard NIC is noch recognized, but i only got a self assigned IP (error message at boot is "Mac address trough SPI is Invalid")!!
i think i've got the Attansic L1E onboard NIC instead of the Attansic L1...
what to do now?

Does anyone have the ATL1E working? On windows I see the ATL1E as
Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller


AR8121 AR8113 AR8114 PCI-E ethernet controller. I'm on a Asus P5Q

This is the windows driver: http://dlsvr.asus.com/pub/ASUS/lan/Atheros...V10038_WHQL.RAR

NO, I think, that correct driver for Attansic L1 Ethernet with ID 1969-1026 (0x10261969) does not exists for Mac OSX !!!

If you want to connect to LAN (Internet or etc...), only solution is buy a new PCI Ethernet Card for example with chipset Realtek RTL8139 like me and other users, who have similar problem with attasnic L1 Ethernet.

It's quite annoying having a PCI ethernet card... I noticed that on my linux OS I've got a module for my ethernet ATL1E, they're developing,
I've compiled 2.6.27.6-default linux kernel by myself and I included the ATL1E that is in developing, but it works very well: /lib/modules/2.6.27.6-default/kernel/drivers/net/atl1e/atl1e.ko

Should we import that module from the kernel source?

Hy,

well if I was smarter and read this before installing I wouldn’t lost 8 hours yesterday...

I was trying to install iDeneb 10.5.5

Configuration is:

ASUS P5KR
E6750
Audigy SB
XFX 9600GT
Corsair VX 450W
2x250gb seagate baracuda
2x640gb WD
1x500gb samsung
1x320gb seagate baracuda
(all SATA II)
Silicon image controller A-341 (PCI-E)
2xATA DVD-RW (pioneer and sony-nec)

so there is no way to install Attansic L1 Ethernet?

I can see that someone started developing drivers...

Well nothing...I will buy some cheap ass Realtek

ATL1 it's available http://forum.insanelymac.com/index.php?s=&...st&p=944347
ATL1E device ID: [1969:1026] it's ***NOT*** available, I hope it could be available... can anyone answer my hope?

well I found this..they say that driver is ok

http://forum.insanelymac.com/index.php?act...st&id=31745

try

maybe is that driver OK, but it is for Attansic L1 Ethernet with ID 1969x1048

But we all need correct driver for this card with ID 1969x1026 !!!

PLEASE HELP !!!

Yes, that's true! My AMDbox was running on JaS' 10.4.8 and later on ToH's 10.5.1
I had to buy a RTL8139D - for about 9 USD - to get LAN running. Coz I prepared
that box for selling I removed my good ol' 8139 and cleared the hdisk.
Just for fun I installed temporarely ToH's 10.5.2 and LAN was not working. So I found
that particular driver I descibed serveral posts above. And LAN was running since then
thru the builtin Attansic chip.

My AMDbox isn't sold since now so there I installed a few days ago iDeneb1.3-10.5.5 for AMD/Intel
and my Attansic chip works by selecting that driver in the install "Customize" section.
From that /System/Library/Extensions folder I copied the Attansic kext and zipped it using BetterZip.
In my attachment you can try that kext...

Inside that folder in the Info.plist I found:

<key>IOPCIMatch</key>
<string>0x10481969 0x816810ec</string>

Sorry for all DEV=1026 owners, but you can give it a try...(by changing the DEV string??? - but I'm in doubt)

Hi Stenka Razin! You mentioned this thread is for 1969x1026 only. I never found any of such restrictions
in this tread. But - I'm not perfect.

But the cheap PCI card RTL8139D will work out of the box, of course! It's a wise decision to do so
for everybody where the Attansic chip is not working AND using a desktop box for inserting such a card ;-)

Hy,

but how can I find out is it my Attansic chip 1969x1048 or 1969x1026?

I am using windows xp pro sp2.

In everest ultimate edition i see only this info:

Attansic L1 Gigabit Ethernet 10/100/1000Base-T Controller

Tnx.


Forget about this..I found it in everest

Devices-PCI devices..

my ID is 1969x1048..I will try with this driver

http://forum.insanelymac.com/index.php?act...st&id=31745


no..same odl problem..

I tried to instal iDeneb whin vanila kernel and only whit ICHR and Jmicon drivers..no sound..no graphics..no nothing..

when installation is done my pc restarts...and then I get error

you need to restart your computer. hold down the power button for several second or press restart button

I tryed whit other kernel versions..no efect..whit or without pacages for sound and graphic..no results...so..and idea?

try booting in safe mode (-x) or boot with verbose(-v) and tell us the error that you see

Damn i have the same damn problem on the same damn board. I hope they can get this fixed ASAP! it's a f__king pain in the ass trying all these damn things.