Interestingly is the x700 patch suppose to be a Linux Executable (Intel) file?

Everytime I used the patch, I am unable to boot up since callisto goes haywire.com

Is there if I were to be finding my dot clock of 71000 what hex should i search under the original callisto file?

Ahh fixed, problem was not using 10.4.5 ati drivers, thought I could pull it off the ones that came with 10.4.9 uphuck.

But QE/CI still not working, need to look through the steps involved in activating QE/CI again -.-"

anyone here with an acer aspire 5020 or 5024 and got the x700 5653 to work? If so can you please pm me and sent your adjusted callisto file? I have dotclock 71250 but i cant get it to work with that hexediting.. only blank screens here.

Hope someone can help me with this



-->UPDATE<--

Finally figured it out.... at dotclock 71500 mine was working perfect... it took about an hour to get it all right but now.....WOOEEHAAAAA

Ovof thank you, and all the others helped with this

Worked for me - acer travelmate 4600 / 4603 WLMi with ATI x700 0x5653. Mouse sux but at least works. )

hello,
i have next the tutorial of georRG77,but my screen is 1024 and i don't change, my pc is a asus a6va with a x700 mobility.
and in the tuto there is "repair atiradeon9700.kext, hown it is?
thank you

sorry for my english.

to repair ATIRadeon9700.kext:

Open Terminal,

type: sudo nano /System/Library/Extensions/ATIRadeon9700.kext/Contents/Info.plist

Search for IOPCIMatch, there are serveral Dev-ids and if you applied thr Koverg - Callisto - Framebuffer Script correctly you should find 0x56 in the lines of Dev-ID's. Repair means to make that dev-id correct: for you this would be then: 0x56531002

Ctrl + O
Enter
Ctrl + X

Now the kext has been repaired.

I finally managed to get QE and CE supported with 1024x768 on my Satellite Pro Toshiba,
using Koverg v.2 patch on 10.4.5 Ati kexts on a 10.4.10 MacOSX install
(Apr Universal kernel, with no extra ATI driver).

Then i tried all Callistos but only 006 worked for me, with Ovof's patch.
I can change to 1280x800 but with flickering.
I tried 71250 dot clock (52 16 01 00 at 4900) but flickers again.
Can anyone, please help me to find the right dot clock value?
Thanks to Georg, Ovof, Phoenix, Kovpas, Largo for their valuable help.

After three months and a lot of reading, i finally made it work with kexts from 10.4.5, Callisto 6, Ovof's file and 71510 dot clock (57 16 01 00).
Now with 1280x800 and QE, CI supported i installed iLife08, working nice.
Mouse tearing is next.

Hi all
I have Notebook Asus A6qVa with x700 Radeon and JaS 10.4.8, installed on it. During instalation, i have unchecked the option "Install ATI driver" (according to the guide, that i used). And now i'm trying to set up all my hardware.
In Mac OS setting now i can choose only 1024x768, i want more:). Should i reinstall Mac OS (and choose option "ati drivers") or i can use this guide (http://forum.insanelymac.com/index.php?s=&showtopic=37842&view=findpost&p=373877) right now? Or there is any other way?
thanks

I, i got x700 mobility 128mb 5653 working at 1280x800, but with no QE/CI, Ive done geoRG77 method..
any help please?? btw i got 10.4.8 jas..
u think 10.5.1 would be better?? lol

edit: Well i now saw the problem.. i was putting 565321002 on ATIRadeon9700.kext but when i put 56531002, i cant boot.. my screen stays in mac grey screen, altought i got mouse.. XD

any ideias??

Hi to all,
I've an old Asus A6va with this da*n Ati x700!
I've tried installing both linux and osx with no luck. Well, base OS works, but without hardware acceleration (so no compiz/ci/qe/ecc..). I have not yet tried Ovov trick because i wish to install Leopard.
I've got "KALYWAY_LEO_10.5.1intel_SSE2_SSE3", it finishes the regular installation, but after restart what i get is a simple white screen and a system auto-reset after about one minute...
I've tried most of the hints read on the leopard dedicated forum of this board, but nothing..
So I'm wondering if any of you have managed setting Leopard up'n'running on a notebook like mine or at least with this videocard, and if it's possible or i have to give up.
Thanks in advance

Hi to everybody, anyone could say me how can i change my resolution??? 1024x768 to 1280x800
(i've kalyway 10.5.1 with ati X700 (dev5653))
With the previous procedure i can't see anything because i've black screen.
I think is a refresh problem.
I'm sorry for my english.
Hi

THANK YOU SOOO MUCH!!! WITH YOUR HELP MY LIFE HAS GOT A NEW SIN ... now my asus a6va works perfectly under xxx osx86 10.4.11 ppf1 ... an i can start to play with this beautiful os ... greets

This worked for too:
Acer Aspire 5021 mobility radeon x700 128mb


Thank you so much Ovof!

(edit: dot clock = 71250, used 71510 = 0x11756 )

Can someone help me with the HEx editing thing? it looks like it doesnt work.? so maybe i am doing something wrong?

Is use Callisto B006, and my dotclock is 71250 (Leo 1.5.1 Zeph) Acer 5024Wlmi

Thnx in advance!

I'm using iAtkos Leopard, is it safe to use this method? Im new to mac and i don't know the difference between tiger and leopard (i only know that the version is different )

View Member Profile Add as Friend Send Message Find Member's Topics Find Member's Posts ipsmenu.register( "post-member-374106", '', 'popmenubutton-new', 'popmenubutton-new-out' );

InsanelyMac Protégé



Group: Members
Posts: 20
Joined: 24-February 07
From: Czech Republic/EU
Member No.: 87,598



raggedjagged: QE/CI is not provided by Callisto, but by patched Apple ATI driver.

QE/CI/Callisto fixed by OVOF howto for ATI Mobility Radeon x700 (Device ID 5652 or 5653) and Mac OS X 10.4.6 JaS

1. Download Intel 10.4.5 Update
2. Download Pacifist demo (via google)
3. Extract all ATI*.kexts and OpenGL.framework from update using Pacifist.
4. Copy ATI*.kexts to /System/Library/Extensions
5. Delete /System/Library/Frameworks/OpenGL.framework
6. Copy OpenGL.framework to /System/Library/Frameworks/
7. Install Koverg - Callisto - Framebuffer All-in-one
sudo ./builddoe.sh 56 52 #5652 is my device ID
sudo ./doe.sh cal6 0x0x0 1 1
8. Repair ATIRadeon9700.kext (because sudo ./builddoe.sh 56 52 add only 0x56 instead of 0x56521002) #5652 is my device ID
8. Download Callisto 006 fixed by OVOF and unpack it to your Desktop
9. sudo cp -R /Users/<YOUR NAME>/Desktop/Callisto /System/Library/Extensions/Callisto.kext/Contents/MacOS
10. Repair disk permissions with Disk Utility
11. Restart

Sorry for my bad English.


MA PORCA PUTTANAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

ok mi sono sfogato...

I AM A NOOOOOOBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB

there are 3 day that i read information abuot mobility X700 but i have a lot of problem...

BEFORE INSTALLING:

I have ACER ASPIRE 1694wlmi

Manufacturer Acer Model Aspire 1694 Wlmib Type Laptop System
Processor Intel Pentium M (Centrino Dothan 760 2MB L2/533MHZ,) Clockspeed 2Ghz Internal Memory 1024MB DDRII RAM (2x 512) Max Internal Memory 2048 MB Display & Grahpics Controller
Display Size 15.4"WXGA Acer CrystalBrite, Resolution 1280 × 800 pixel resolution; 16:10 viewing ratio Graphics Controller ATI X700 256MB Storage
Hard Drive 100GB HDD (5400rpm) DVD Integrated DVD-Dual Double Layer Cardreader 4-in-1 card reader (SD/MMC/MS/MS Pro) Connectivity
Modem 56K Modem LAN 100Mbs LAn Wireless Lan Wireless 802.11g Lan Bluetootth Build in bluetooth controller OS Microsoft® Windows® XP Home (SP2) Pre-installed Processor en chipset Intel® Centrino™ technology featuring:
Intel® Pentium® M processor with 2MB L2 Cache and 533Mhz FSB. Supports Enhanced Intel® SpeedStep® Technology
Intel® 915PM Express chipset
Wireless: Integrated Intel® PRO/Wireless 2200 BG network connection Connectors 3x USB 2.0
1x Infrared (FIR)
1x VGA for external monitor
1x 32bit type II PCMCIA CardBus slot
1x S-video out (NTSC/PAL)
1x IEEE 1394 port
1x RJ-11 jack
1x RJ-45 jack
Headphones/speaker/line-out port (with S/PDIF Support)
1x microphone/ line-in jack
1x DC-in jack for AC adapter
4-in-1 card reader (SD/MMC/MS/MS Pro)


I Have follow thi instruction...

1. Download Intel 10.4.5 Update (NOW I HAVE!!!) OKKKKKKKKKKKKKKKK

2. Download Pacifist demo (via google) (NOW I HAVE!!!) OKKKKKKKKKKKKKKKK

3. Extract all ATI*.kexts and OpenGL.framework from update using Pacifist. Now i must write same problem..
I search with PAcifist file kext and i find:
ATINDRV.kext
ATIRadeon8500.kext
ATIRadeon9700.kext
ATIRadeon.kext
ATIRadeonX1000.kext
only this...
ITS OK???????
I Find OpenGL.framework and copy ti desktop. OKKKKK

5. Delete /System/Library/Frameworks/OpenGL.framework ... I try to delete but after i put it inside trash it say me that are used elements... I can't trash, i have only put this folder inside trash.. ITS OK??????

6. Copy OpenGL.framework to /System/Library/Frameworks/ OKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK

7. Install Koverg - Callisto - Framebuffer All-in-one
sudo ./builddoe.sh 56 52 #5652 is my device ID
sudo ./doe.sh cal6 0x0x0 1 1

OK i download extract on desktop after i open a terminal ad i write:

cd desktop
ls (i see where is the file OK i find it)
cd ATIScript.z0rz.v0.2
ls
cd ATIProj
sudo ./builddoe.sh 56 53 (My device Is 56 53)
sudo ./doe.sh cal6 0x0x0 1 1 (i don't know what is this command but i do and it finish ok...I hope..)
close terminal
NOW i THINK I FINISH STEP 7... OK????????

8. Repair ATIRadeon9700.kext (because sudo ./builddoe.sh 56 52 add only 0x56 instead of 0x56521002) #5652 is my device ID
HERE i'm LOST but after a lot of time a finish to repair with this istruction...

(to repair ATIRadeon9700.kext:

Open Terminal,

type: sudo nano /System/Library/Extensions/ATIRadeon9700.kext/Contents/Info.plist

Search for IOPCIMatch, there are serveral Dev-ids and if you applied thr Koverg - Callisto - Framebuffer Script correctly you should find 0x56 in the lines of Dev-ID's. Repair means to make that dev-id correct: for you this would be then: 0x56531002

Ctrl + O
Enter
Ctrl + X

Now the kext has been repaired. )

I have write 0x56531002 but i'm not sure to second part i only know 0x5653..1002 what is??
however i close and save with 0x56531002...I hope...
Close terminal...

8 (2). Download Callisto 006 fixed by OVOF and unpack it to your Desktop OKKKKKKKKKKKKKKKKKKk

9. sudo cp -R /Users/<YOUR NAME>/Desktop/Callisto /System/Library/Extensions/Callisto.kext/Contents/MacOS

i write sudo cp -R /Users/takaitakai/Desktop/Callisto /System/Library/Extensions/Callisto.kext/Contents/MacOS
but don't do nothing, back to command... some one can help if i must change command or other...
however after i close terminal...

10. Repair disk permissions with Disk Utility OKKKKKK i go to Disk Utility and click on rapir permisson...is ok?

11. Restart

NOW FLIKERING a lot I have all resolution in system profile i have i correctly ID but all flikkering...

Now i try to change a dot clock
i open a terminal

cat /var/log/system.log | grep 1280x800

in the terminal appair:

defaul pannel model: 1280x800 . dot clock : 68900

NOW????????? HOW TO CHANGE dot clock????

Please step by step...I?M NOOB
SORRY FO MY BADDESTTTTTT ENGLISH

Hey ho! Well right now i can use QE etc.. with a resolution of 1280x800x32 in tiger. But im having real trouble with the dot clock. I've seen that some users with 71000 (my case) can't freeze the flickers The best value i had with the Callisto fix by ofov was 70620. Can someone help me? I think im doing everything right.

Asus a6va ->Ati Mobility Radeon x700-> 0x5653

Common, anyone?

Hi there, awesome finding ovof

Is it possible to use this trick with Kallyway 10.5.1 in the Asus A6Va with x700 (5653) ?
I managed to boot in 1280x800 with the flicker issue.

When i replace the Callisto (hex edited) file, it doesn't boot.

So, any luck for us Leopard guys?

Thanks in advance

What about the ATI Radeon Mobility X700 XL (Hardware ID 0x564F)?
Any luck with Ovofs Method on this one? And what about 10.5.2?

Has anyone of you already a working X700 under 10.5.x?

Thanks in advance!

I finally got it! HEHE! I'm using Leopard by iAtkos right with a 0x5653 ATI board and i figure out which is the dot clock for the Asus a6Va with 71000 -> 71500 (could it be easier?) Follow the tutorial in page 5 (made by geoRG77). but skip this:

1. Download Intel 10.4.5 Update
2. Download Pacifist demo (via google)
3. Extract all ATI*.kexts and OpenGL.framework from update using Pacifist.
4. Copy ATI*.kexts to /System/Library/Extensions
5. Delete /System/Library/Frameworks/OpenGL.framework
6. Copy OpenGL.framework to /System/Library/Frameworks/
7. Install Koverg - Callisto - Framebuffer All-in-one
sudo ./builddoe.sh 56 52 #5652 is my device ID
sudo ./doe.sh cal6 0x0x0 1 1
8. Repair ATIRadeon9700.kext (because sudo ./builddoe.sh 56 52 add only 0x56 instead of 0x56521002) #5652 is my device ID
9. Download Callisto 006 fixed by OVOF and unpack it to your Desktop
9. Download Callisto 006 in attachment (Attention this is only for 71000 dot clock's)
10. sudo cp -R /Users/<YOUR NAME>/Desktop/Callisto /System/Library/Extensions/Callisto.kext/Contents/MacOS
10. Repair disk permissions with Disk Utility
11. Restart
12. Have fun! (personal quote )


Special thanks to ovof and geoRG77 (You're the MAN!)

Warning!!! more Terminal to MacOS not Working, i have good tested 10.5.1 Kalyway and 10.5.2 Leo4Allv2 : nope

I use 10.4.8 Jas this Terminal perfekt work!!!

Now Step by Step install ATIRadeon Mobility x700 ID:5653  jas 10.4.8

1. Download ATIScript.z0rz.v0.2.zip
2. extract on desktop after open the Terminal and write:
3. cd desktop "Click Enter"
4. cd ATIScript.z0rz.v0.2 "Click Enter"
5. cd ATIProj "Click Enter"
6. sudo ./builddoe.sh 56 53 (My device Is 56 53) "Click Enter"
7. sudo ./doe.sh cal6 0x0x0 1 1 "Click Enter"
8. Close Terminal...

9. Repair ATIRadeon9700.kext (because sudo ./builddoe.sh 56 53 add only 0x56 instead of 0x56531002) #5653 is my device ID

Now istructions for repair ATIRadeon9700.kext:
1) Open Terminal
2) sudo -s
3) nano /System/Library/Extensions/ATIRadeon9700.kext/Contents/Info.plist
4) Search for IOPCIMatch, there are serveral Dev-ids and if you applied thr Script correctly you should find 0x56 in the lines of Dev-ID's. Repair means to make that dev-id correct: for you this would be then: 0x56531002
5) For save Click "Ctrl + O"
6) Click "Enter"
7) For end Click "Ctrl + X"
8) Close Terminal...

10. Download Callisto 006 fixed by ovof  and unpack it to your Desktop
11. sudo cp -R /Users/"YOUR NAME"/Desktop/Callisto /System/Library/Extensions/Callisto.kext/Contents/MacOS
12. Close Terminal...
13. Repair disk permissions with Disk Utility
14. Restart

15.Have you Fun!!!
Now i go sleep, Future i make PKG drivers for x700 ID:5653

Your Mac Papa!!!

Hi i still cant get QE/CI i got x700 (5653) i putted 0x56531002 but it just keep saying no QE.. :S:S plz help.

No QE with 10.5.x

Something new ?

Ok...I know....I'm late.....but.....IT WORKS NOW!!!!!
Thanks to all!!!!
Koverg's procedure with OVOF's patch on my hp pavillion dv4000!
I had to hex-editing the dot-clock at 71500, and now no more flickering!
Now I'm surfing with my NEW hackintosh....
Bye bye!!!

Se ti serve io sono riuscito ad installare tutte queste patch (jas 10.4.8) sul mio hp dv4000.
L'unica differenza con la scheda video è che la mia è quella da 128Mb per questo
forse il tuo dot clock potrebbe essere diverso dal mio (71500).
Ciao

Works perfectly !!!!!!! 1280X800, no flickering, QE & CI supported !! - Jas 10.4.8 - X700 Mobility 5653

THANKS TO EVERYONE WHO MADE THIS POSSIBLE !!!!

Is there a way to get this to work on 10.4.11 or 10.4.10 ??? Works great under 10.4.8 but QE and CI can't be enabled on 10.4.11....

THANKS

Legocorp you are the man ,thank u

So, just to be sure...a summary for the compatibility of this patch...

Our 5653 stuff is supported completely under the jas 10.4.6 and 10.4.8.
But under 10.4.9 (Uphucks), 10.4.10 and 10.4.11, QE and CI can't be enabled.
For Leo people, they seem to have no QE with 10.5.x

Am i right?

PS: Thanks for the big work guys

Hi there!
Can anybody plz help me? I have mobility x700 (128Mb, 0x5653,dot clock 71250). I make exactly like a manual, change dot clock to 71510, but still have flickering, a little less, but still have. What dot clock i need? Big thanks
P.S. Sorry for bad english - Iam from Russia

Can some1 send me ATIScript.z0rz.v0.2.zip

Download is not working anymore.

Crypted[at]online.de

THX

Hi,

I followed these instructions:

QE/CI/Callisto fixed by OVOF howto for ATI Mobility Radeon x700 (Device ID 5652 or 5653) and Mac OS X 10.4.6 JaS

1. Download Intel 10.4.5 Update
2. Download Pacifist demo (via google)
3. Extract all ATI*.kexts and OpenGL.framework from update using Pacifist.
4. Copy ATI*.kexts to /System/Library/Extensions
5. Delete /System/Library/Frameworks/OpenGL.framework
6. Copy OpenGL.framework to /System/Library/Frameworks/
7. Install Koverg - Callisto - Framebuffer All-in-one
sudo ./builddoe.sh 56 52 #5652 is my device ID
sudo ./doe.sh cal6 0x0x0 1 1
8. Repair ATIRadeon9700.kext (because sudo ./builddoe.sh 56 52 add only 0x56 instead of 0x56521002) #5652 is my device ID
8. Download Callisto 006 fixed by OVOF and unpack it to your Desktop
9. sudo cp -R /Users/<YOUR NAME>/Desktop/Callisto /System/Library/Extensions/Callisto.kext/Contents/MacOS
10. Repair disk permissions with Disk Utility
11. Restart

And upon restart I saw that I had full CI and QE and I had a full list of resolutions. But when I changed my resolution to my screen's native (1400x1050) I got a black screen, and from then on always get a black screen after rebooting. Is it possible to get it to run at the native res? My specs:
JaS 10.4.6
ASUS V6Va
Mobility x700
tried "Graphics Mode"="1400x1050x32@60" and it hangs.. I got the info dotclock=108000

Thanks

Hi,

Would this procedure work for Leopard? JaS 10.5.4 ?

I have an Acer 1804 with a X700 128mb mobility. :S

hi,

anyone yet tried removing "boot graphics" flag from boot.plist, and then enter EDID manually? maybe this works but i really don't know.




( i know this topic is old but still interesting. )

ohh sorry for not reading properly...i've now done what ovof said and got proper 1680x1050, thx ovof =)