Hey I have the same problem. did you ever get it to work and how? tHANKS!
Levi

Prasys,

Do you have an installer for the 6200 CO Its the overclocked version. Its PCI. I have the exact same system as you do the Dell DImantion 2400 series . I think that processor is se2 and not sse3.

ANyhow my audio does not work but everything else works. I did the jas 10.4.8 install DVD then did the Kookal's Combo 10.4.9 update about 300mb and finally updated the kernel to 8.9.1 from Irc #kernel.

Only thing is not sure what to checkmark during the install. WHat did you check when you updated to 10.4.9?


Edited Post:

I just read a post a little ways up and they wanted to know if your update will work on Kernel 8.9.1. Thats the one I have to.

LIke I said I installed jas 10.4.8 full DVD install. I think I chose only Intel for the Graphics and the Io stuff for intel. I did not checkmark the ATI nor Nvidia drivers. I might do a fresh install along with the Koolkals' combo 10.4.9 update. I just have to think about what additional features I need to checkmark to get the Nvidia 5200 to work?

Dell DImetnion P2.4GHZ SSe2 processor. 1 gig ram.

Hi
I have a problem with a asus nvidia GeForce FX5200 - 128mb -0x10de - 0x0322 - 0x00a1 - 1280x1024
I can to change all resolution but no CI,QE. I used a prisys's method, but no accelereted graphics.... but .......why??
All users have a good installation... I not!!! :-(
Help me please!!
Excuse me for my bad english!

Prasys, thanks alot for this, i finally got good video on my install with everything supported. You are the king .:bows:.

Do I need to have the Titan package installed? When I do that, I cannot boot my machine. It just has a kernel error.
If I DONT have it an install this, i ALSO get a kernel panic.

NVIDIA GeForce FX5200 266mb PCI
Pentium 4 1.7 SSE2
512mb RAM
25gb Partition

what happened to fx5500 installer ?
Please add it or if u don't have enough time put the source and guide us how to make it

You have a working 5200go 32mg, on external lcd?
Wow! I 've a toshiba m200 with same video card, but can't get any QE or CI,
have tried
Natit 1.0 mannual and automatic install.
Titan (as included in this 5200 installer also tried mannual install with Device ID change in info.plist)
MacVidia Drivers.
NVInject also editing DEV IDS.

I'm using Jas 10.4.8 SSE2+SEE3, running kernel 8.8.1 (semthex)
An information you could give on how you got it wokring with Natit or Titan would be very helpful!

Thank You.

Thank you very mauch, Prasys!!! My Geforce Fx 5200 works fine withe fully CI/QE! I'm so happy! You are a

I also have an m200 and am on 10.5.2. No luck with ANYTHING for the internal LCD. NVInject with the right NVCap can get external working nicely but this is kinda useless... Any more on getting the 5200go working in leopard?

Thanks :-)

is the installer for the 5200 still posted on the website posted above?? or has it been deleted, I get a 404 error when i try to download it

can any one reupload it agin

I found a link to the file on another blog. Hopefully its the same version of the file: http://x86osx.com/bbs/data/after/gf5200.zip

I was having some trouble using that link so I've mirrored the file here: http://www.mediafire.com/?fayytmlzwxq

Thank you so much That is one of the things I truely hate about this forum is dead links (even to older posts on this forum) and having to dig up the drives (like I had to for my Audio). Lets hope this driver works, I know the MacVidia drives enable full resolution support but lets hope I get the acceleration benifits!!

thanks so much for the mirror!

G3 is on the move.

only sound is left.

Okay, so I can't get any of this to work. I've been here, here and here, plus this page and I just can't get it to work!

I have a Gainward nVidia GeForce FX 5200 AGP 128MB (devid: 0x0322, vendorid: 10de) video card. I am running Mac OS X 10.4.8 JaS with Semthex 8.8.1. Please help me. Titan doesn't seem to work and I'm just going crazy!!! I might break down and buy another card (of course today happens to be the day that osx86project.org chooses to have a database error and be offline, so I can't get at the HCLs -- jeez).

The card is capable of working. It displays the Mac OS X installer just fine. What am I doing wrong?

It would be nice to get core image and quartz extreme going as well, but I want to focus on getting the card to work first.

Thank you to anyone who can offer any helpful information!

***EDIT***

Okay, so I did break down on the hardware thing a little while ago. Now I have an MSI nVidia GeForce 6200 (NX6200AX-TD256) AGP 256MB. I removed Natit.kext and installed Titan.kext, so now I finally got the display to work...but still no CI/QE, etc. :-( Any thoughts?

NVIDIA GeForce 6200:

Chipset Model: NVIDIA GeForce 6200
Type: Display
Bus: AGP
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0221
Revision ID: 0x00a1
Displays:

VX37L HDTV10A:
Resolution: 1280x720 @ 60 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported

Display:
Status: No Display Connected

link to the installer
http://www.mediafire.com/?fayytmlzwxq

This worked for me on a Dell Dimension3000 with the FX5200 PCI added on. I searched forever and couldn't find a solution.

Thanks a lot.

CI/QE Working on FX5200 AGP w/ iPC 10.5.6 / Revised 01/06/09

1. Install iPC 10.5.6 with NVKush Complete Package - Working
Alternative: Modified version of NVInject Click to view attachment
(NVInject 0.2.1 from DVD did not render QE/CI)
After rebooting, view boot screen to confirm that NVinject (or the "injector" you installed) actually loaded; if it didn't load, rebuild permissions using disk utility and restart

2. If no QE/CI after Reboot: try GForce/NVDAN kexts from 10.5.5

3. Repair "System Preferences Blacked-Out GUI Corruption"
(Only for 10.5.6 install - not occuring in 10.5.5)
Restore the Coregraphics.framework from 10.5.5 WITH PACIFIST
to /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ then Reboot
using Sanya's Method (Thanks Sanya!) ----
--------------------------------------------
Coregraphics.framework 10.5.5 install
1. insert a 10.5.5. distro
2. open pacifist
3. click "open apple install disks"
4. browse to the system folder (inside of one of displayed choices, depends on which distro you are using), and follow the path to Coregraphics.framework, then right-click on it and choose install
5. when it asks you to replace, choose yes (it will over-write the 10.5.6 version)
6. it may go a bit slow, let it run. after, reboot. On reboot, working Preferences GUI...
Alternative: Use "Search" in Pacifist
-------------------------------------------
SSE2 DVD Player Application Fix:
Patched AppleVADriver.bundle to fix DVD Player (SSE2)

Repair Permissions, update prebindings
Above tested and working on MY SYSTEM with Voodoo 1.0 and XNUstage 9.4.0 kernels (individually)
----------------------------
Additional Options: -
10.5.5. seatbelt.kext to fix open dmg issue
Notes:
iTunes "classic" visualizer wont run with options/open GL checked - runs unchecked

Hi, Quaront

Could you provide the files needed w/in your post?

EDIT: Thanks a lot to Quaront!!!
ipc10.5.6 or XxX 10.5.6+865G mobo +FX5200 AGP card(as pci) w/ NVkush complete package both work!!!

I Installed a GeForce FX 5500 and it seems to just keep loading Mac nothing else with a driver I found on the forums

same for me with a Geforce FX 5200. The Card was found by Titan but then my pc hangs up.
I have XxX 10.5.6 with a Voodoo Kernel on an AMD Machine.
Any suggestions?

Hmmm I would like to see if this would work for a NVIDIA geforce go5200 32mb in toshiba m200

Vendor: NVIDIA (0x10de)
Device ID: 0x0328
Revision ID: 0x00a1

It would be a game of replacing id's and NVCAP's yes?

If anyone could help me get QE/CI working I would love them forever

I'm going to make a easy tutorial and/or installer for this tablet if i can because they sell on ebay for 300 pounds and make great lil "touchbooks" as i call them