trying to register there but no confirmation mail

EDIT: just received it. everything ok just had to wait

Taruga,

Same problem here man.. Tried registering but there ain't no convermation e-mail....

Antoniya001

EDIT: Problem solved... Server is just slow... Took long to get the reply...

i'll register also ,whatever you need me to test in p5k premium ADI1998B tell me
as i saw the table you created is correct...it's not working (inputs,digital output)

Very GOOD, look for driver

Taruga, you are a legend. Sure I accidently downloaded the wrong audio driver each time (268 looks a lot like 262 and 868) but I finally got it! THANK YOU SO MUCH

dude when i installed ur installer it messed my inet up. and i dont understand. what the hell happened?

Guys!

I`ve tried this dump: alc888_ich7_codecdump.txt
I`ve got ALC888 and ICH7. My configuration is in my signature.
The output works fine, but no input and I really need it.
Can somebody give me a nice dump or help me make output?

Thanks,
Chris

i have tried all the alc880 dumps and none have worked. any suggestions or ideas?

Hi can anyone help?

I got this notebook two days ago, I already run your patchers on my Dell Dimension 9200(XPS410) in do it quite successfully!

For the life of it, I can't get this going! I would really like it , if you can help!

HP DV6716ez
The link shows the codec dump in Ubuntu:

http://www.mediafire.com/?ynuuwzg1os1

It come up on the first install with a HD Audio OUT but no sound!

It the shows this in the "About this Mac"
Device ID: 0x103C30CC
Audio ID: 12

install ALC268 drivers

i should install alc268 drivers or some1 else?

Funny you should mention that!!

After giving the list on Taruga's post a quick onceover I could not find it, and therefore posted this request, ONLY to go look again and then to see it!

If ANYBODY wants to know

I have a HP dv6716ez, With EVERYTHING WORKING!!!

Graphics WORKING QE/CI
Sound WORKING Mic, Speaker, Headphones
Wireless BCM94312 in Airport
Trackpad WORKING with scroll
Power Management WORKING.....
HP WebCAM WORKING native

Let me stop here, the bottom line is EVERYTHING is working!!
(with some patching, but stil no major fiddeling) EVERYTHING

Hardware Overview:

Model Name: Mac
Model Identifier: HP Pavilion dv6700 Notebook PC
Processor Name: Intel® Core™2 Duo CPU T5550 @
Processor Speed: 1.83 GHz
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL EST TM2 SSSE3 CX16 TPR PDCM
Memory: 4 GB
Bus Speed: 2.67 GHz

I really tried to get an Apple MacBook Pro(so I had the money) but between eBay and some doggy dealer in China after two weeks this is the best alternative, although somewhat illegal


SticMAN
ps I'll update my Sig soon

is there any1 with working alc880 driver that can give me some instructions. im new to mac

also for every 880 dump i have tried none of them show anything on the output screen. im on a emachine t5010 pentium 4. i use realtek alc880 hda on the vista partition on this comp but none of the 880 dumps work and im dieing for sound

Anyone knows if there're something else that could mess up with this HDA?
i can't get it set up right on some installations and some can ...
some may lost the full HDA after i got i right on previous reboot ..

Thanks!

at least ur getting some sound, i get nothing

Does anyone know the solution to the shutdown issue (with ALC268) detailed here? :
http://forum.insanelymac.com/index.php?showtopic=96434
Thanks
-hplaptopmac

Damn, so I'm out of luck then? Arrrrgggghhhh, !!!

It is being done as we speak. There will be news on the next few weeks. meanwhile, Taruga is gathering a database on: http://wiki.taruga.net/First of all, check http://wiki.taruga.net/next, explain exactly what are you doing, and are you getting your own codec dump from your system? Or just using the one made by others? If so, check, on this forum how to make one from your system

Hi guys,

I tried 22/12/2007 AD1986 0x11d41986 for testing and it works 80% for me.

Before this, I had only sound thru my internal speakers. After installing this, I have got options to send sound to either internal speakers or headphone (my loudspeakers, great for music maniac). However, I notice 2 problems:

1. No microphone in, though there're echoes from microphones (internal and external line-in)
2. Main volume bar (near system clock) is disabled (but it is adjustable in all multimedia programs)

Patcher 1.20 doesn't work with my code dump, and Patch 2.0 has still been delayed. Anyone can help to fix to enable microphone-in work?


Note Added: My laptop is Asus V1JP and its sound hardware is AD1986A 0x11d41986. (Taruga says: Laptop W3 -- AD1986a 0x11d41986 -- Nothing works???)

Here is my codec:

Hi jjduro,

Thanks for the reply, I used my own codec dump from Ubuntu...

That's great news, re: "It is being done as we speak."

I will check the web address above, Thanks again...

It's the users of Taruga Wiki that update the working and not working sound devices table. Go there and insert you Asus V1JP it will help Taruga to keep track of the several codecs and sound issues.

Still having big problems here:

Asus F9S
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Realtek ALC660-VD

No sound at all, Azalia doesn't work too.
Taruga patcher 1.17 seems able to patch HDA kext using codec dump from Ubuntu (in Ubuntu audio works but need some change in drivers). but still have no sound.

Looking into system.log I can see this error line at every boot:

kernel[0]: AppleHDAController::start ERROR no layout-id found.

I hope this could help...

Thanks !

Max

I hope Taruga is going to make the Analog Devices AD1988B chip of the Asus P5K-E work!!!

Hi mates I'm reallt new here and a newbie in osx.
I don't think I'm the first one to have problems with ACL 880.It seems like i found out a trick or maybe it was the procedure to follow, i dont know i'm not skilled at all in osx, let me explain myself:

There are different solutions available throught the forums (the appleHDA patcher with your linux txt dump)the 880 and others drivers called betaforsome 861-881 ect).I tried several times and i did not get any success.So i decided to do my own dump with using xubuntu.

launch your xubuntu/ubuntu live cd and then :
browse to home/proc/asound/card0 right click and open terminal with left click and type : sudo thunar (nautilus is for ubuntu) to open your file browser in root mode then copy the file which is named codec to somewhere you can get it later.

under osx:
use your file with a drag and drop to applehdapatcher then as said replace your applehda in your kext folder, then reboot.

sound wont work now so lauch appleacl882 applehda v0,4b.mpkg (a sound fix if i'm right) let it install files automatically and then finally lauch beta4some861-880 installer reboot and you should have sound.

I dont know if my method is good as it might sound strange and may be not correct but it did work for me.If you have bad results dont blame me.
I really hope it will help out some people

PS: my kernel is the speedstep one under leopard 9,5,2 even if I have an intel SSE3

I hope that people read this and could help me out (as I have Taruga looking at this problem as well).

SOUND CHIP: SigmaTel 92HD71B

REAL NAME: 92HD71B8

SPECIFICATIONS: http://www.idt.com/products/getDoc.cfm?docID=18452184

RELATED LINK WITH LINUX SUPPORT : http://ubuntuforums.org/showthread.php?t=676550


PROBLEM: I have worked with HDA Patcher however I am getting a generic codec error due to the fact that my Chipset under Linux (unbutu 7.10 live) finds two codecs and not one (codec#1 codec#2). It classifies my card as two devices that are found as:

HDA INTEL (ALSA MIXER) = Dump1
GENERIC 111D ID 76B0 (OSS MIXER) = Dump2

Talking to members in #osx86 one felt that my chipset might be running through northbridge and using a dummy patch to cross. I have attached the dumps below and would love any help on this.

DUMP ONE



DUMP TWO

AppleHDA Project has moved to http://wiki.taruga.net
Feel free to join, participate, post sound issues, etc ... only this way I can do my best to help

ps. Reason for moving... I needed better organization and control.

Where do I find the AppleHDA 1.2, theire website is down and i need it

Yeah I agree with the above poster. Taruga, you suggest we goto this "wiki" and all I get is a cPanel page. Please fix it, as my wife is pissed cause she doesn't have sound on her laptop due to my...meddling with her laptop and putting OSX86 on it

Still output does not work! It is working in speakers only.
I used USB adapter from plantronis but sound quality sucks. HD Codec works much better.

ТАНЦЫ С БУБНОМ ПРОДОЛЖАЮТСЯ БЛЯ!

Hy, yes taruga's website is down but i have the taruga's patcher v1,2 if you need it ? So give me your mail adresss and i can send it by mail...But i have the patcher but not the codec that i need ^^... So if someone have the ACL882 codec please can you send me it by mail at ghislain.s@orange.fr please???THX

for those who need taruga's sollutions, go to: http://osxupdate.blogspot.com/

Could someone pretty please upload taruga's AppleHDA Patcher 1.20 (or latest avalible one) to mediafire/rapidshare/or any file hosting network. ALL current ones I've found are down except for 1.16 which is rather old.

Thanks....hopefully someone see's this on page 195

BTW BIG thank you to taruga!

Found it lingering in an old post around here when his site went MIA last summer(think do to a server change) anyways here it is for anyone else that needs it.

AppleHDA Patcher v1.20 (newest) FYI must be logged in to download.

Did anyone get the sound working.. i really want Sound.. plz anyone HELP!!!

im runing in on a hp Compaq Nc6320.. its 11d4 and 1981.. the ones that ppl have on here.. plz help me out.. i got wireless working with a usb adapter..

Other word about ethernet would be helpful and if someone can help me get the best res on my computer..

Plz take the time and help..

I noticed my headphone jack is not working. Yet my internal speakers are working fine.

I plug in my headphones into the jack and the audio from my internal speaker shuts off, yet no audio comes out of the headphones. I see under System Preferences -> Sound, the output changes automatically from "Internal Speakers" to "Headphones" as soon as I plug it in.

I believe I am using the audio drivers straight from the Kalyway 10.5.2 install which ran OOB. I have a Sigmatel 9200 on a Dell Latitude d420 laptop (specs and what I did to install in my sig below). Any help would be appreciated. Thanks!

link01, what exactly all did you use to get your 9200 working, internal speakers only?

Truthfully, nothing really. It worked OOB with the Kalyway 10.5.2 install. The only thing I selected in the "Customize" under "Audio" was sigmatel_9200_inspiron_9400. Right after that reboot, I had audio coming out of my internal speakers. I don't know what kext that maps to.
Since then, I updated my box to a 10.5.5, but I kept the previous audio settings. (if you look at my signature, I have a link that details what exactly I did.)

EDIT: I got the headphone jack and internal speakers to work. I found this post: http://forum.insanelymac.com/index.php?s=&...st&p=798502
It works like a charm.

Thanks for this man. I never needed the hda patcher with my old mobo (dell intel board) but this new one has alc888 sound so off I go to try and get it to work.

osx86 is like an adventure

Thanks man! but i must be stupid or something, i only get a windows asking me to drop the linux code dump onto it

Where can i find the linux code dump for my Realtek ALC880, i tought this was a .kext?

Look at the very first post in this topic. At the bottom of it you'll see "How to use AppleHDA Patcher:"
The second link under that goes to a site that has txt's for a bunch of audio devices. ALC880 is there (your job to find which one of the multiple versions work with your hardware).

Got it!

So i downloaded and dropped the alc880.txt on AppleHDAPatcher1.20.app, it patched, I rebooted, but no sound detected.

Don't i need a kext to patch?

I could very well be wrong, but I assumed the patcher does everything automatically. It worked for me just doing that. Maybe someone could verify or disprove my statement.

You can also try one of the other .txt's. I saw many versions of alc880.

use the dumps from the psykopat website or you can make your own dump using a linux live cd and googling the terminal command for a audio codec dump...this is most likely to work. then you just drag the dump.txt file into the HDApatcher turtle icon and wham bam thank you maim you should have working audio. but if your on 10.5.5 its less likely to work since tauraga has been out of the scene for a while for health reasons.


@link: the patcher is patching a kext you already have loaded into working condition (appleHDA.kext) you could get some1 elses working kext if they have the same dev ids and such ad use that with kext helper but the patcher is easier.

COME BACK TO US TAURUGA WE NEED AND MISS YOU!! HOPE ALL IS WELL!!!

I can't get http://wiki.taruga.net........

can someone help me get my codec working please
I have been trying for days and have had no luck at all.

I dumped my codec from ubuntu 8.10 and this is what I have.
I have also tried to use the hdapatcher 1.20 and it gives me an error saying this codec isn't supported.
my system is a Gateway FX P-6860

help!!!

am *almost* sure i'm doing what i'm supposed to do properly, but the AppleHDAPatcherv1.20 is saying that it has *detected unsupported Codec.

AppleHDA Patcher - 2006/2007 by Taruga v1.20

________________________________________
codec:
Vendor Id:
Subsystem Id:
________________________________________

*Detected unsupported Codec

Here's what I did:
I have a Gigabyte GA P35 DS3L mobo, which as i've read in these forums has an ACL888 Realtek Soundcard. So i went to http://psykopat.free.fr/apple/AppleHDA/realtek/alc888.txt and copied the text file from there. With the AppleHDA patcher unopened, i dragged the relevant text from the webpage, onto the icon of the AppleHDA Patcher, which opened, asking for my password. I supplied my password, and the text above came out.

Any idea how to get the sound working on my system please? and could anyone tell me why the codec isn't working? it says alc888.txt, so i assume that's the correct text i'm supposed to be using. btw, i also tried using different versions of the alc888, all of those available on psykopat's site. the B,D,C,A,1,2 etc. flavors, but none of them worked!

help would be greatly appreciated.

hi every body

my english is poor so I really hope express myself

I new in OsX and I have some problems with my sound card, so I will really appreciate some help. I installed ideneb v1.3 (Leopard 10.5.5) and I really try so hard to configure my sound card (mainboard Intel D946GZIs, audio chipset stac9227). I tried with many appleHDA.kext, and with the linux dump using Tarugas patcher 1.15, 1.16, 1.17, 1.18, 1.19 and 1.20 but no one works.

I will really appreciate some help or some comments who guide me.

thanks a lot

blessings

this my linux dump

********************************************************************************
*********

Codec: SigmaTel STAC9227
Address: 2
Vendor Id: 0x83847618
Subsystem Id: 0x8086a201
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x31 0x31]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xd8 0xd8]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xd8 0xd8]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xd8 0xd8]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Vendor Defined Widget] wcaps 0xfd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: setting=D3, actual=D3
Delay: 13 samples
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1b
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1c
Processing caps: benign=0, ncoeff=0
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1d
Processing caps: benign=0, ncoeff=0
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=30, enabled=1
Connection: 2
0x02* 0x03
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02a19080: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x8, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 2
0x02* 0x03
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0181304e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect Trigger ImpSense
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect Trigger ImpSense
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x503301f0: [N/A] CD at Int N/A
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00001: Stereo
Node 0x14 [Vendor Defined Widget] wcaps 0xf00001: Stereo
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x19
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x1a
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x7, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x9, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 4
0x02* 0x03 0x04 0x05

********************************************************************************
*********

Yea, I got the Sigmatel STAC9200 on my inspiron 9400 and no go either. I am using the ideneb 1.3 install like you as well. I tried using the dumps that taruga gathered (psykopat.free.fr site) and i keep getting the "unsupported codec" error on both 1.16 and 1.2 of the Patcher. I do however have the appearance of sound, just no actual sound comes out.

Hello,

too bad for me the source aren't open. it was just for testing purposes.no matter i'll find other way

thanks a lot

go there: http://osxupdate.blogspot.com/

yup.. you are doing it wrong.
download the txt file for your codec and drag and drop it onto the unnopend patcher, don't select the text and drag.type your password and cross your fingers.



go to http://osxupdate.blogspot.com/



go to http://osxupdate.blogspot.com/



yes, there are several versions. try http://osxupdate.blogspot.com/

Hi All,

Thanks for everyone's hard work to get osX86 and sound in particular along as far as it is!

I'm running iDeneb Leopard 10.5.5 (Sigmatel 9200 audio patch) on a Dell Latitude D820 laptop. The soundcard is a Sigmatel 9200.

Codec: SigmaTel STAC9200
Vendor Id: 0x83847690
Subsystem Id: 0x102801cd
Revision Id: 0x102201

Out of the box I got working sound, but no working microphone though the external showed up. Dell Laptop Post Installer v1.3 > Sigmatel 9200 installs a driver that does Internal Speakers, Digital Out, and External Microphone.

I've been trying to patch the original AppleHDA.kext with AppleHDAPatcher v1.20 and the codec I ripped using a Ubuntu 7.10 desktop boot CD. Booting a patched original always yields no output or input devices. Could using a newer version of Ubuntu provide a better codec rip?

Has anyone else with this card gotten their internal mic to show up? I'm most interested in the ability to use a microphone, preferably internal.

Checked out http://osxupdate.blogspot.com/, thanks for the info there.

Codec is attached.

Thanks and good luck!