I tried using the guide and hexediting AppleHDA, but I had no success. I also can't see to find any information about my particular vendor/subsystem id. The vendor id doesn't seem to match any sigmatel 9227 documents I've seen.
Codec: SigmaTel STAC9227
Address: 2
Vendor Id: 0x83847618
Subsystem Id: 0x80860420
Revision Id: 0x100201
Full Version: AppleHDA Solution - Work in progress
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
ALC268 working unexpectedly...
EDIT: ok it was using azalia, not HDAudio. perfect speakers output, perfect volume control. No luck on ALcInject and HDA
EDIT: ok it was using azalia, not HDAudio. perfect speakers output, perfect volume control. No luck on ALcInject and HDA
QUOTE(Robin Masters @ Oct 10 2007, 08:32 PM) 
Anything about AD 1981HD?... 
Try my guide here> http://forum.insanelymac.com/index.php?sho...c=64754&hl=
Full input & output has been achieved on some systems running Intel ICH7 on ADI codec.
If you are under Intel chipset, in the AppleAC97AudioIntelICH.kext you need to place two copies of the vendor ID and device ID both under say the ICH7 and Nvidia AC97 sections ie. 0x27d88086 under the IOPCIMatch sections. Read my post for more info.
Any word on the ALC862?
ALC882 work with patch in my signature but only out... input still needed
I've been searching the forums for an hour and can't seem to find a fix for my conexant hd audio. My HP dv6000 laptops internal speakers work, but that's it. I really need my headphones.
Another hopeful user groveling for AD1988B support. Existing h/w support with audio out meets most needs, but mic input would be nice for my gaming endeavors. One less reason for me to boot into XP and one more reason to reformat that drive to JHFS+. 
Im getting an odd bug
In skype when i have a text chat it cuts my sound
reselecting the sound device via skypes prefs recognises it again
everything else seems to work fine including video and audio chat
In skype when i have a text chat it cuts my sound
reselecting the sound device via skypes prefs recognises it again
everything else seems to work fine including video and audio chat
QUOTE(vinlar @ Oct 18 2007, 06:32 AM)
Another hopeful user groveling for AD1988B support. Existing h/w support with audio out meets most needs, but mic input would be nice for my gaming endeavors. One less reason for me to boot into XP and one more reason to reformat that drive to JHFS+.
I second that
QUOTE
Try my guide here> http://forum.insanelymac.com/index.php?sho...c=64754&hl=
Full input & output has been achieved on some systems running Intel ICH7 on ADI codec.
If you are under Intel chipset, in the AppleAC97AudioIntelICH.kext you need to place two copies of the vendor ID and device ID both under say the ICH7 and Nvidia AC97 sections ie. 0x27d88086 under the IOPCIMatch sections. Read my post for more info.
Full input & output has been achieved on some systems running Intel ICH7 on ADI codec.
If you are under Intel chipset, in the AppleAC97AudioIntelICH.kext you need to place two copies of the vendor ID and device ID both under say the ICH7 and Nvidia AC97 sections ie. 0x27d88086 under the IOPCIMatch sections. Read my post for more info.
Thank's Middleman, I have tried your guide, but for me don't work in or out audio. I have tried also the Conexant_HD_Audio.pkg.zip but nothing.
My card is AD1981HD and my laptop is HP Compaq nx9420, there is a button with a little led for 'no sound' always on!
QUOTE(Robin Masters @ Oct 18 2007, 11:03 PM)
Thank's Middleman, I have tried your guide, but for me don't work in or out audio. I have tried also the Conexant_HD_Audio.pkg.zip but nothing.
My card is AD1981HD and my laptop is HP Compaq nx9420, there is a button with a little led for 'no sound' always on!
My card is AD1981HD and my laptop is HP Compaq nx9420, there is a button with a little led for 'no sound' always on!
Robin,
I found that my guide works on most AC97 setups - I got 6 channel sound, mic & line-in on one machine! If you are using a Soundmax HD chip (which in your case, you are) you then have to use Taruga's AppleHDA method. Its actually quite easy - I solved another machine with a Realtek ALC883 using Taruga's method.
And if you want to know what the binary code for your codec id is for AppleHDA, use the Apple Calculator set to Programming mode. If you use the HEX calc and type in 0x11D41981, and press the DEC button it should give you the number you need.
AppleHDAPatcher says mine is an unspooprted Analog Codec. Is there any hope? Its on an IBM Thinkpad Z60M.
CODE
Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x10140597
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x33 0x33]
Pincap 0x081173f: IN OUT HP EAPD Detect
Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x2d 0x2d]
Pincap 0x081f: OUT HP Detect
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals:
Pincap 0x081727: IN Detect
Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x081737: IN OUT Detect
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 13
0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081737: IN OUT Detect
Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x10140597
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x33 0x33]
Pincap 0x081173f: IN OUT HP EAPD Detect
Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x2d 0x2d]
Pincap 0x081f: OUT HP Detect
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals:
Pincap 0x081727: IN Detect
Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x081737: IN OUT Detect
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 13
0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081737: IN OUT Detect
Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
I have the alc262, when i configure everything, I see the option for output, and i can play with adjusting the volume up and down, but i can not get any sound out of any speakers, on board laptop speakers, headphones etc. please guys help me out, is there something else i have to adjust???
Today I got the Ubuntu and Kubuntu Install Disks, with these I got sound on speakers (of course they are usign the ALSA driver that patches or bridge the headphones jack to the speakers and detects when a plug is inserted so silence the speakers and pass the shout to that jack)
I fetch the codec#0 and now it has another sound option I think is the Digital (SPDIF) output through the HDMI connector, I have not an HDMI cable, decoder, Display so I can't confirm this now.
Anyway if anyone want the dump here it is:
in Mac OS I still getting sound only from headphones Jack 1 only
I fetch the codec#0 and now it has another sound option I think is the Digital (SPDIF) output through the HDMI connector, I have not an HDMI cable, decoder, Display so I can't confirm this now.
Anyway if anyone want the dump here it is:
in Mac OS I still getting sound only from headphones Jack 1 only
how do i know what kind of sigmatel driver / codec i m using?
I really do not know what to do now, i can't hear any sound. However I can play with the volume adjustment and i see the output in the settings, but no sound from laptop speakers or external speackers or headphones.... grrr.... im going crazyyyyyyy
QUOTE(tikipreston @ Oct 18 2007, 06:46 AM)
I've been searching the forums for an hour and can't seem to find a fix for my conexant hd audio. My HP dv6000 laptops internal speakers work, but that's it. I really need my headphones.
anybody who has something to contribute to get our Conexant HDA working, please do so here.Thanks,
Bugs
Using 10.4.10 xXx installer disc I was able to get the audio to work out of the box the first time around,
now the second time around it's not working of course.
dell e510, which is the same as e310 and e5105
with sigmatel audio
i just cant find the driver
which i take the codec dump from here :http://wiki.osx86project.org/wiki/index.php/HCL_10.4.8/Desktops
and drop it into the patcher, it says * Detected unsupported SigmaTel Codec
not sure how to find my device id, because it's not showing up anywhere.
ideas?
now the second time around it's not working of course.
dell e510, which is the same as e310 and e5105
with sigmatel audio
i just cant find the driver
which i take the codec dump from here :http://wiki.osx86project.org/wiki/index.php/HCL_10.4.8/Desktops
and drop it into the patcher, it says * Detected unsupported SigmaTel Codec
not sure how to find my device id, because it's not showing up anywhere.
ideas?
Taruga, please
can you make this patch for Leopard
I use Intel 975xbx and it have Sigmatel 9221, but not have sound
All it works, but no sound =(((
please
can you make this patch for Leopard
I use Intel 975xbx and it have Sigmatel 9221, but not have sound
All it works, but no sound =(((
please
Hi,
I wanted to thank everybody here for their effortss to make these Sounds working.
I think finding a good match for any listed soundcard here is even harder than writing a new one! in this mess I see here (126 page!) no one can find the answer.
For example me, I can't find a way to enable my Volume bar for my CMI9880 on ICH6 of my Asus p5AD2-e mobo, and of course I have only 2-ch audio (anyhow I'm using analog speakers and I have 4-ch artificialy!).
HDAPatcher won't work for my CMI9880 dump file I found in the link provided in the download instruction (on first page), it says Unsupported C-Media Codec detected!.
Any guide? Am I missing a point (maybe I need to create my own Linux dump on my PC - which for sure I don't know how! ).
Big man taruga is missing and nobody knows how to go on this project (specially when I think no one intrested in cmi9880!-poor Sound card!).
I have an Creative audigy, but as everybody (for sure) knows, there would be no compatibility for it, so I have to use my onboard Sound card, I have sounds (thanks God!) but,only 2-ch,no input(nothing important here), no volume control, lots of jitters on some bitrates and much more frustration here...
I love this Mac, But I love music more, what a hard life to live!
I wanted to thank everybody here for their effortss to make these Sounds working.
I think finding a good match for any listed soundcard here is even harder than writing a new one! in this mess I see here (126 page!) no one can find the answer.
For example me, I can't find a way to enable my Volume bar for my CMI9880 on ICH6 of my Asus p5AD2-e mobo, and of course I have only 2-ch audio (anyhow I'm using analog speakers and I have 4-ch artificialy!).
HDAPatcher won't work for my CMI9880 dump file I found in the link provided in the download instruction (on first page), it says Unsupported C-Media Codec detected!.
Any guide? Am I missing a point (maybe I need to create my own Linux dump on my PC - which for sure I don't know how!
).Big man taruga is missing and nobody knows how to go on this project (specially when I think no one intrested in cmi9880!-poor Sound card!).
I have an Creative audigy, but as everybody (for sure) knows, there would be no compatibility for it, so I have to use my onboard Sound card, I have sounds (thanks God!) but,only 2-ch,no input(nothing important here), no volume control, lots of jitters on some bitrates and much more frustration here...
I love this Mac, But I love music more, what a hard life to live!
QUOTE(gecko @ Oct 20 2007, 04:59 AM)
AppleHDAPatcher says mine is an unspooprted Analog Codec. Is there any hope? Its on an IBM Thinkpad Z60M.
CODE
Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x10140597
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x33 0x33]
Pincap 0x081173f: IN OUT HP EAPD Detect
Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x2d 0x2d]
Pincap 0x081f: OUT HP Detect
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals:
Pincap 0x081727: IN Detect
Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x081737: IN OUT Detect
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 13
0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081737: IN OUT Detect
Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x10140597
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x33 0x33]
Pincap 0x081173f: IN OUT HP EAPD Detect
Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x2d 0x2d]
Pincap 0x081f: OUT HP Detect
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals:
Pincap 0x081727: IN Detect
Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x081737: IN OUT Detect
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 13
0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081737: IN OUT Detect
Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Gecko,
Follow my guide here > http://forum.insanelymac.com/index.php?sho...mp;#entry476428
Middleman,
AD1981HD is no AC97 codec. Your guide will not work!
re-book
AD1981HD is no AC97 codec. Your guide will not work!
re-book
I know the Sigmatel 9200 has been discussed many times over these 127 pages, but my output is a bit different.
Everything with the sound works great in Ubuntu 7.10, so I got my own code dump from that and used it with the 1.6 patcher (I'm running uphuck 10.4.9 v1.4i).
Basically after I reboot, I get no sound in/out and nothing is listed in the Audio section of System Preferences. Also, the audio part of System Profiler shows nada.
If anyone has any ideas, I'd be eternally grateful.
I'll attach my linux dump in case anyone wants to take a peek.
CODE
* Patching AppleHDA.kext to 0x83847690 Done
* Checking AppleHDA for patch Done
0001f4a7 cmpl $0x83847690,%eax
0002058b cmpl $0x83847690,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Detected
* Creating AppleHDA configs
* Using the following nodes in pathmap
Back Mic: 3 10 12 15
Speaker : 14 11 7 2
Spdif In : 4 8
Spdif Out: 9 5
* Copying new config to destination Done
* Repairing Permissions
Started verify/repair permissions on disk disk0s1 Hackintosh HD
Determining correct file permissions.
The privileges have been verified or repaired on the selected volume
Verify/repair finished permissions on disk disk0s1 Hackintosh HD
* Deleting Extensions Cache Done
** Done patching - You can reboot now **
* Checking AppleHDA for patch Done
0001f4a7 cmpl $0x83847690,%eax
0002058b cmpl $0x83847690,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Detected
* Creating AppleHDA configs
* Using the following nodes in pathmap
Back Mic: 3 10 12 15
Speaker : 14 11 7 2
Spdif In : 4 8
Spdif Out: 9 5
* Copying new config to destination Done
* Repairing Permissions
Started verify/repair permissions on disk disk0s1 Hackintosh HD
Determining correct file permissions.
The privileges have been verified or repaired on the selected volume
Verify/repair finished permissions on disk disk0s1 Hackintosh HD
* Deleting Extensions Cache Done
** Done patching - You can reboot now **
Everything with the sound works great in Ubuntu 7.10, so I got my own code dump from that and used it with the 1.6 patcher (I'm running uphuck 10.4.9 v1.4i).
Basically after I reboot, I get no sound in/out and nothing is listed in the Audio section of System Preferences. Also, the audio part of System Profiler shows nada.
If anyone has any ideas, I'd be eternally grateful.
I'll attach my linux dump in case anyone wants to take a peek.
Thank you man!I have realtel ALC 880 sound card!! But please write me how to install this files and what files from this page I must download! Please write me because before I use only Windows! Please!!! Please help me!
Nice work!
My Dell e520 (sigmatel 9227) using Kalyway 10.4.10 works with stac9227_83847618
My Dell e520 (sigmatel 9227) using Kalyway 10.4.10 works with stac9227_83847618
It looks like 198b (1988b) is the most wanted... Any chances for it's support?
does this work on ALC888? or is there a ADI AD1988B driver?
It seem's that there are some outstanding cards that do not work in the sigmatel 9200 line. I have a Dell D420 that I have spent the good part of 2 weeks trying to patch, reinstall, repair...etc ...etc.
I have tried tarugas patcher (all version) and it seems to detect everything correctly and attempt to patch the kexts but....no luck after reboot. I have tried my own codec dump from this machine as well as many of the others posted on various threads.
Here is the top info of of the dump
Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801d6
Revision Id: 0x102201
I am usually really good about searching the forums and finding the solutions but alas I need to ask for help. I have attached the full Codec dump from Linux for this machine. Any help would be appreciated. I would be willing to test anything anyone can offer.
Peace,
discin420style
I have tried tarugas patcher (all version) and it seems to detect everything correctly and attempt to patch the kexts but....no luck after reboot. I have tried my own codec dump from this machine as well as many of the others posted on various threads.
Here is the top info of of the dump
Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801d6
Revision Id: 0x102201
I am usually really good about searching the forums and finding the solutions but alas I need to ask for help. I have attached the full Codec dump from Linux for this machine. Any help would be appreciated. I would be willing to test anything anyone can offer.
Peace,
discin420style
Download beta4some861_880models.zip and unzip the archive then
drag ALCinject.kext and AppleHDA.kext to /System/Library/Extensions
open Terminal
sudo chmod -R 755 /System/Library/Extensions/ALCinject.kext
sudo chown -R root:wheel /System/Library/Extensions/ALCinject.kext
sudo chmod -R 755 /System/Library/Extensions/AppleHDA.kext
sudo chown -R root:wheel /System/Library/Extensions/AppleHDA.kext
Please friends write me what this means and how make my sound card Realtek ALC880 working on my MacOs 10.4.8????Please help me! Please!!
drag ALCinject.kext and AppleHDA.kext to /System/Library/Extensions
open Terminal
sudo chmod -R 755 /System/Library/Extensions/ALCinject.kext
sudo chown -R root:wheel /System/Library/Extensions/ALCinject.kext
sudo chmod -R 755 /System/Library/Extensions/AppleHDA.kext
sudo chown -R root:wheel /System/Library/Extensions/AppleHDA.kext
Please friends write me what this means and how make my sound card Realtek ALC880 working on my MacOs 10.4.8????Please help me! Please!!
QUOTE(Herr_quark @ Oct 23 2007, 01:13 PM)
It looks like 198b (1988b) is the most wanted... Any chances for it's support?
Seconding that. Im really hoping we can get sound (mic-in) on OSX86 !!!! Im dying to leave windows behind and mic-in is the only thing holding me back.
Hi guyz and thanks for the effort to make our life easier
My question is why there is support for everything but ALC862
everyday i come to check on the forum and yet nothing about ALC862
I have no mic no input and each time I use skype I have to switch to windows
for those who got a full working alc862 please raise your hands thanks
My question is why there is support for everything but ALC862
everyday i come to check on the forum and yet nothing about ALC862
I have no mic no input and each time I use skype I have to switch to windows
for those who got a full working alc862 please raise your hands thanks
QUOTE(Segfaulted @ Oct 16 2007, 10:19 PM)
I tried using the guide and hexediting AppleHDA, but I had no success. I also can't see to find any information about my particular vendor/subsystem id. The vendor id doesn't seem to match any sigmatel 9227 documents I've seen.
Codec: SigmaTel STAC9227
Address: 2
Vendor Id: 0x83847618
Subsystem Id: 0x80860420
Revision Id: 0x100201
Codec: SigmaTel STAC9227
Address: 2
Vendor Id: 0x83847618
Subsystem Id: 0x80860420
Revision Id: 0x100201
I have exactly the same codec. It has been possible to run only way out, microphone in the system but there is not working. AppleHDA Patcher used v1.16
Click to view attachment
I need support for the SigmaTel 9250
Any news for "alc861 with Subsystem Id: 0x10430000" ... now only working internal-speakers-out (it's a notebook), no mic, no line-out, no spdif ... no hope!
Is here any guide on how to make sound drivers for OS X or how to make existing drivers work with other hardware? I want to play with it...
QUOTE(_quark_ @ Oct 24 2007, 11:03 AM)
Is here any guide on how to make sound drivers for OS X or how to make existing drivers work with other hardware? I want to play with it...
1) Taruga's guide2) Macdanger's guide, based on Taruga's Guide but with more details and his own experiences
Good luck
! Which HDA are you trying to make working?
My SoundMAX Integrated Digital HD Audio (vendorID: 11d4 / deviceID: 198b) on M2N-E motherboard
WHERE is taruga..?
QUOTE(superjames2040 @ Oct 4 2007, 10:51 PM)
Hey yeuthem, I couldn´t get the headphone to work yet, I only have the internal speakers working via AppleAzalia, sorry, I´m looking how to make it work, I tried all the three ALC262 test and none of them worked for me, if you get everything working please tell me how, thanks.
I have headphones working but not internal speakers (and this is what i need... of course!) .
I'have alifebook c1040; tried with 10.4.8, .9, .10, whit the azalia audio method nothing working and only a generic output device shown in system preferences.
With taruga's test kext now headphones are working (with test1, test2 and test3) and internal speakers are shown only with test2 and test3 but never working.
As i undestood, many people can get alc262 working with the azalia method (most of them have speakers working and not headphones).
Does anyone have the same laptop and internal speakers workings ????
Thanks for your help
macosse, i have the same situation as you...
i'm using lifebook s7110 on 10.4.8 and 10.4.9...
only able to get sound from headphones and not the speakers
i'm using lifebook s7110 on 10.4.8 and 10.4.9...
only able to get sound from headphones and not the speakers
I hacked a little with Taruga guide and my ALC262. My driver is actually broken. It works but with some lockups. I report here a zip and a readme. I need help to get this working. I'm actually in a deadline...
Headers and Speaker are both working. Mic seems to be working but causes a lockup with output.
Headers and Speaker are both working. Mic seems to be working but causes a lockup with output.
CODE
WARNING! THIS IS AN ALPHA DRIVER FAR FROM BEING FUNCTIONAL....
EVEN IF I'VE NEVER EXPERIENCED REAL PROBLEMS, USE IT AT YOUR OWN RISK!
BACKUP AND RESTORE
-------------------------------------------------------------------------------------
o)- To backup. If you are using AppleHDA, from console:
sudo mkdir /backup
sudo cp -f -R /System/Library/Extensions/AppleHDA.kext /backup
o)- To restore. If you were using AppleAzalia:
sudo rm -f -R /System/Library/Extensions/AppleHDA.kext
If you were using a previous AppleHDA and you did a backup as above:
sudo cp -f -R /backup/AppleHDA.kext /System/Library/Extensions
and reboot.
INSTALLING
-------------------------------------------------------------------------------------
The following Kext works only for the following Realtek 262 model:
Vendor Id: 0x10ec0262
Subsystem Id: 0x104d1600
Check your hardware subsystem id before installing it.
To install it, open a console and type:
sudo su -
cd /YOURPATH_TO_THIS_KEXT_ZIP/
cp -f -R ALCinject.kext /System/Library/Extensions
cp -f -R AppleHDA.kext /System/Library/Extensions
rm -f -R /System/Library/Extensions.*
diskutil repairPermissions /
Finally reboot.
FEATURES:
-------------------------------------------------------------------------------------
- speaker out
- headphones
- mic in *
KNOWN ISSUES:
-------------------------------------------------------------------------------------
- there are lockups in the play.
- opening system preferences -> sound will mute all channels for some time.
Closing system preferences will re-enable your device after some seconds.
- speaker and headphones are connected to the same mixer. Actually is the only way
I found to make work both. You can't choose the ouput. Both will work,
but you can select the one active with the jack of your headephones.
- if device is not playing, there are strange clicks...
- You can see input mic working from system preferences -> sound.
The level meter shows the right input value of the mic. However
input seems not to work with Skype or other software. It seems to be
a lockup.
EVEN IF I'VE NEVER EXPERIENCED REAL PROBLEMS, USE IT AT YOUR OWN RISK!
BACKUP AND RESTORE
-------------------------------------------------------------------------------------
o)- To backup. If you are using AppleHDA, from console:
sudo mkdir /backup
sudo cp -f -R /System/Library/Extensions/AppleHDA.kext /backup
o)- To restore. If you were using AppleAzalia:
sudo rm -f -R /System/Library/Extensions/AppleHDA.kext
If you were using a previous AppleHDA and you did a backup as above:
sudo cp -f -R /backup/AppleHDA.kext /System/Library/Extensions
and reboot.
INSTALLING
-------------------------------------------------------------------------------------
The following Kext works only for the following Realtek 262 model:
Vendor Id: 0x10ec0262
Subsystem Id: 0x104d1600
Check your hardware subsystem id before installing it.
To install it, open a console and type:
sudo su -
cd /YOURPATH_TO_THIS_KEXT_ZIP/
cp -f -R ALCinject.kext /System/Library/Extensions
cp -f -R AppleHDA.kext /System/Library/Extensions
rm -f -R /System/Library/Extensions.*
diskutil repairPermissions /
Finally reboot.
FEATURES:
-------------------------------------------------------------------------------------
- speaker out
- headphones
- mic in *
KNOWN ISSUES:
-------------------------------------------------------------------------------------
- there are lockups in the play.
- opening system preferences -> sound will mute all channels for some time.
Closing system preferences will re-enable your device after some seconds.
- speaker and headphones are connected to the same mixer. Actually is the only way
I found to make work both. You can't choose the ouput. Both will work,
but you can select the one active with the jack of your headephones.
- if device is not playing, there are strange clicks...
- You can see input mic working from system preferences -> sound.
The level meter shows the right input value of the mic. However
input seems not to work with Skype or other software. It seems to be
a lockup.
QUOTE(AlexIT @ Oct 24 2007, 08:01 AM)
Any news for "alc861 with Subsystem Id: 0x10430000" ... now only working internal-speakers-out (it's a notebook), no mic, no line-out, no spdif ... no hope!
you have sound on internal speakers? Wow! You are truly blessed QUOTE(MacintizeD @ Oct 24 2007, 04:24 PM)
WHERE is taruga..?
Probably doing his job
Damn... I can't understand those "guides" they are too messy for me (maybe because of my English)
Taruga, if you need to play with AD1988b - just say
Taruga, if you need to play with AD1988b - just say
Same old story - any news on the status of the Sigmatel 9205 drivers yet?
Hi all!
Help me plz!
I'm have SigmaTel STAC9227, but
AppleHDA Patcher - 2006/2007 Taruga v1.16
* Patching AppleHDA.kext to 0x83847618 Done
* Checking AppleHDA for patch Done
0001f4a7 cmpl $0x83847618,%eax
0002058b cmpl $0x83847618,%eax
* Checking for SPDIF Out Not Detected
* Checking for SPDIF In Not Detected
* Creating AppleHDA configs
* Using the following nodes in pathmap
Back Mic: 7 27 21 11
Speaker : 13 2
* Copying new config to destination Done
* Repairing Permissions
And microphone not work. I also try ext from stac9227_83847618.zip but nothing. Any idea?
Sorry. Bad english.
P.S. Motherboard IntelŽ Desktop Board DQ965GF
Help me plz!
I'm have SigmaTel STAC9227, but
AppleHDA Patcher - 2006/2007 Taruga v1.16
* Patching AppleHDA.kext to 0x83847618 Done
* Checking AppleHDA for patch Done
0001f4a7 cmpl $0x83847618,%eax
0002058b cmpl $0x83847618,%eax
* Checking for SPDIF Out Not Detected
* Checking for SPDIF In Not Detected
* Creating AppleHDA configs
* Using the following nodes in pathmap
Back Mic: 7 27 21 11
Speaker : 13 2
* Copying new config to destination Done
* Repairing Permissions
And microphone not work.
I also try ext from stac9227_83847618.zip but nothing. Any idea?Sorry. Bad english.
P.S. Motherboard IntelŽ Desktop Board DQ965GF
Has anyone gotten the Analog Devices AD1988B running? I've been patching left and right the last couple of hours, but not a peep from my soundcard ;P
I've attached my codec just in case. The motherboard is an Asus P5K-E.
I've attached my codec just in case. The motherboard is an Asus P5K-E.
@ discin420style and anyone still having problems getting any output from the Sigmatel 9200 / stac9200:
Try the attached dump with your Taruga patcher of choice. I'm still having problems muting and getting the speakers to shut off when headphones are plugged in, but that's another project altogether.
Keep your eyes peeled at this thread: http://forum.insanelymac.com/index.php?showtopic=15474
...for all the latest updates on mute & speaker/headphone switching functionality. Hope this helps.
Try the attached dump with your Taruga patcher of choice. I'm still having problems muting and getting the speakers to shut off when headphones are plugged in, but that's another project altogether.
Keep your eyes peeled at this thread: http://forum.insanelymac.com/index.php?showtopic=15474
...for all the latest updates on mute & speaker/headphone switching functionality. Hope this helps.
i have a Asus p5ld2-SE, and it doesn`t work....
what can i do?
>>SoundMax Integrated HD Audio<<
what can i do?
>>SoundMax Integrated HD Audio<<
hi everyone,
hmm.. i have read through these forums and learned that my card is the most popular and still no driver patch for it (p5b deluxe with soundmax adi ad1988b). not that i am displeased with anyone or anybody, and hey, the appleazaliaaudio tweak provides stereo output for these damn 1988b's too.
my question is directed to those who are more well versed in hardware than myself:
somewhere in bios setup i can choose between 'hd audio' and 'ac97' i see no change when i set it eitherway, but can this help me? like.. suppose i set it to 'ac97' and then i can use some of the drivers? please help, i would positively need mic input or line-in.
thanks,
bamdad
hmm.. i have read through these forums and learned that my card is the most popular and still no driver patch for it (p5b deluxe with soundmax adi ad1988b). not that i am displeased with anyone or anybody, and hey, the appleazaliaaudio tweak provides stereo output for these damn 1988b's too.
my question is directed to those who are more well versed in hardware than myself:
somewhere in bios setup i can choose between 'hd audio' and 'ac97' i see no change when i set it eitherway, but can this help me? like.. suppose i set it to 'ac97' and then i can use some of the drivers? please help, i would positively need mic input or line-in.
thanks,
bamdad
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.