first of all, thanks Taruga for your work.
i have a Sony Vaio VGN-N330FH with everything working fine, only having problems with audio.
If i use Azalia i have speakers sound, but no headphones or mic.
if i use any of your extensions revisions, i can see in HALLAB working audio, also in control panel, but i hear nothing.
by using this version: http://forum.insanelymac.com/index.php?sho...mp;#entry440597
i have my mic working! but no audio yet coming out from speakers or headphones.
i have a ALC262 device , VendID 10EC devID 0262 susbsystem 104D1600
i know this is very close to be working, i hope with your work i finally manage to have audio on my laptop.
Taruga, what can i do? should i wait a little more for your research? is there anything else i can do?
thanks again
Full Version: AppleHDA Solution - Work in progress
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
No luck here with a Gigabyte P35-DS3L with ALC888,
the patcher runs fine, finishes, but a reboot brings no sound devices.
the patcher runs fine, finishes, but a reboot brings no sound devices.
QUOTE(Greasy Breakfast @ Sep 8 2007, 08:42 PM) 
No luck here with a Gigabyte P35-DS3L with ALC888,the patcher runs fine, finishes, but a reboot brings no sound devices.
It may be missing ICH9 pci id .....QUOTE(matemago @ Sep 8 2007, 08:17 PM)
first of all, thanks Taruga for your work. i have a Sony Vaio VGN-N330FH with everything working fine, only having problems with audio. If i use Azalia i have speakers sound, but no headphones or mic. if i use any of your extensions revisions, i can see in HALLAB working audio, also in control panel, but i hear nothing. by using this version: http://forum.insanelymac.com/index.php?sho...mp;#entry440597i have my mic working! but no audio yet coming out from speakers or headphones.i have a ALC262 device , VendID 10EC devID 0262 susbsystem 104D1600i know this is very close to be working, i hope with your work i finally manage to have audio on my laptop.Taruga, what can i do? should i wait a little more for your research? is there anything else i can do?thanks again
Try the kext´s at post #1 for your codec... maybe you´ll have better results...
thanks for your quick response.
i just tried the kext, but still the same problem, should i post the ioreg log? or paste some screenshots? what can i do so you can help me.
thanks
i just tried the kext, but still the same problem, should i post the ioreg log? or paste some screenshots? what can i do so you can help me.
thanks
i tried again the 3 versions for ALC262 and this is what i got:
test1: no speakers, no headphones, mic working
test2: no speakers, no headphones, mic working
test3: no speakers, no headphones, no mic
in test1 and test2 kexts, sound preferences show internal speakers for output and internal mic for input
in test3 kexts, it shows internal speakers and headphones for output , and internal mic and internal speakers for input
here is myioreg.txt
thanks again
test1: no speakers, no headphones, mic working
test2: no speakers, no headphones, mic working
test3: no speakers, no headphones, no mic
in test1 and test2 kexts, sound preferences show internal speakers for output and internal mic for input
in test3 kexts, it shows internal speakers and headphones for output , and internal mic and internal speakers for input
here is myioreg.txt
thanks again
Back to using the azalia driver for now. BTW, where is it that I can donate to these efforts?
please Obi Wan Taruga, you're my only hope! =)
QUOTE(matemago @ Sep 8 2007, 08:17 PM)
first of all, thanks Taruga for your work.
i have a Sony Vaio VGN-N330FH with everything working fine, only having problems with audio.
If i use Azalia i have speakers sound, but no headphones or mic.
if i use any of your extensions revisions, i can see in HALLAB working audio, also in control panel, but i hear nothing.
by using this version: http://forum.insanelymac.com/index.php?sho...mp;#entry440597
i have my mic working! but no audio yet coming out from speakers or headphones.
i have a ALC262 device , VendID 10EC devID 0262 susbsystem 104D1600
i know this is very close to be working, i hope with your work i finally manage to have audio on my laptop.
Taruga, what can i do? should i wait a little more for your research? is there anything else i can do?
thanks again
i have a Sony Vaio VGN-N330FH with everything working fine, only having problems with audio.
If i use Azalia i have speakers sound, but no headphones or mic.
if i use any of your extensions revisions, i can see in HALLAB working audio, also in control panel, but i hear nothing.
by using this version: http://forum.insanelymac.com/index.php?sho...mp;#entry440597
i have my mic working! but no audio yet coming out from speakers or headphones.
i have a ALC262 device , VendID 10EC devID 0262 susbsystem 104D1600
i know this is very close to be working, i hope with your work i finally manage to have audio on my laptop.
Taruga, what can i do? should i wait a little more for your research? is there anything else i can do?
thanks again
Is that last ioreg of yours a few posts above the one after the mic working and not the rest ?
Send me pics of both sound inputs and outputs of that one you said you have mic working, also an ioreg -lw0 dump
I think for sony stuff maybe it´s easy to hack the bios
What do that guys do to codec implementation ?!
ok Taruga, this is my ioregs and screens for ALC262test1 and ALC262test3 kexts.
test1 has mic working fine, since i tested it with voice recognition. but no output.
test2 does the same as test1, so i dont post images . if you need ioreg, let me know.
test3 recognizes speakers and headphones, but no sound for both, and no mic working. it shows two input sources i think this is wrong.
thanks again for your time
test1 has mic working fine, since i tested it with voice recognition. but no output.
test2 does the same as test1, so i dont post images . if you need ioreg, let me know.
test3 recognizes speakers and headphones, but no sound for both, and no mic working. it shows two input sources i think this is wrong.
thanks again for your time
QUOTE(Taruga @ Sep 3 2007, 05:00 PM)
AD1986A users, I think only AppleHDAPatcher v1.13 worked for you guys.
I tried with AppleHDAPatcher v1.13 and when i restart the computer there is this black screen and it says i have to restart computer. I am runing mac os 10.4.3.
Plz help.
Hey Taruga!!!
And what about that MYIOREG that I send to U???
Alguma evolução ou descoberta sobre o problema com a minha ALC883 no notebook MSI???
Um grande abraço!!!
And what about that MYIOREG that I send to U???
Alguma evolução ou descoberta sobre o problema com a minha ALC883 no notebook MSI???
Um grande abraço!!!
QUOTE(wingtech @ Sep 9 2007, 09:31 AM)
I tried with AppleHDAPatcher v1.13 and when i restart the computer there is this black screen and it says i have to restart computer. I am runing mac os 10.4.3.Plz help.
Again the same issue !!! 
Don´t use my stuff with mac os older than 4.8 !I´m tired of repeating myself, there´s a warning at post #1 where the stuff is regarding that.Now, you have to delete applehda.kext and alcinject.kext from your /System/Library/Extensions/Boot with -s or with a DVD to access the file system and delete those filesQUOTE(propolis @ Sep 9 2007, 05:01 PM)
Hey Taruga!!!And what about that MYIOREG that I send to U???Alguma evolução ou descoberta sobre o problema com a minha ALC883 no notebook MSI???Um grande abraço!!!
I´m on that issue right now, but it will take time.Estou estudanto o caso, pois afecta varios codecs. Vai demorar ....
Hi Taruga!
I really appreciate a AD1998B HDA patcher. (sorry for posting this request several times)
I have Asus P5B-VM motherboard, the patcher v1.16 talks about some further work...
"
AppleHDA Patcher - 2006/2007 Taruga v1.16
_______________________________________________________
Codec : Analog Devices AD1988B
Vendor Id : 0x11d4198b
Subsystem Id : 0x104381f6
_______________________________________________________
This codec is not working at the moment, it needs more research
"
A working microphone would be great!
Thanks in advance!
I really appreciate a AD1998B HDA patcher. (sorry for posting this request several times)
I have Asus P5B-VM motherboard, the patcher v1.16 talks about some further work...
"
AppleHDA Patcher - 2006/2007 Taruga v1.16
_______________________________________________________
Codec : Analog Devices AD1988B
Vendor Id : 0x11d4198b
Subsystem Id : 0x104381f6
_______________________________________________________
This codec is not working at the moment, it needs more research
"
A working microphone would be great!
Thanks in advance!
QUOTE(Taruga @ Sep 8 2007, 04:33 PM)
It may be missing ICH9 pci id
I have no idea where to begin to correct this.... when you have a minute please help point me in the right direction. cheers.
Hello Taruga, I have HP notebook with AD1981. I have sound card visible, but the mute led is still on and there is no sound - i think that this is a problem with hp notebooks (i tried 1.13 and newer patchers). Please help HP users, you are our last hope. This is my codec dump (HP NX7400,ey508es).
CODE
Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x103c30a2
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x34 0x34]
Pincap 0x081173f: IN OUT HP EAPD Detect
Pin Default 0x92174110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Green
Pin-ctls: 0x40: OUT
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x34 0x34]
Pincap 0x081f: OUT HP Detect
Pin Default 0x0421201f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Grey
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x410710f0: [N/A] Line Out at Ext Rear
Conn = Analog, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals:
Pincap 0x081727: IN Detect
Pin Default 0x04a12020: [Jack] Mic at Ext Right
Conn = 1/8, Color = Grey
Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x081737: IN OUT Detect
Pin Default 0x0181302e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x4145f0f0: [N/A] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x0c 0x0c]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 13
0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x995711f0: [Fixed] Digital Out at Int ATAPI
Conn = Analog, Color = Black
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x5993e0f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = White
Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081737: IN OUT Detect
Pin Default 0x59a790f0: [N/A] Mic at Int ATAPI
Conn = Analog, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x593310f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x18
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x103c30a2
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x34 0x34]
Pincap 0x081173f: IN OUT HP EAPD Detect
Pin Default 0x92174110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Green
Pin-ctls: 0x40: OUT
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x34 0x34]
Pincap 0x081f: OUT HP Detect
Pin Default 0x0421201f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Grey
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x410710f0: [N/A] Line Out at Ext Rear
Conn = Analog, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals:
Pincap 0x081727: IN Detect
Pin Default 0x04a12020: [Jack] Mic at Ext Right
Conn = 1/8, Color = Grey
Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x081737: IN OUT Detect
Pin Default 0x0181302e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x4145f0f0: [N/A] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x0c 0x0c]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 13
0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x995711f0: [Fixed] Digital Out at Int ATAPI
Conn = Analog, Color = Black
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x5993e0f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = White
Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081737: IN OUT Detect
Pin Default 0x59a790f0: [N/A] Mic at Int ATAPI
Conn = Analog, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x593310f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x18
i have installed 10.4.9 in a dell latitude d620 and all that is not working is the audio.in the bios it says i have a Sigmatel 9200 i have tried the applehdapatcher v1.16 and im not geting anything to work here if any one can help it would be great thanks
p.s also when i try installing the patches all i get is * Detected unsupported \f0\fs24 Codec and i am very new to osx thanks
p.s also when i try installing the patches all i get is * Detected unsupported \f0\fs24 Codec and i am very new to osx thanks
QUOTE(forextrader @ Sep 9 2007, 10:20 PM)
i have installed 10.4.9 in a dell latitude d620 and all that is not working is the audio.in the bios it says i have a Sigmatel 9200 i have tried the applehdapatcher v1.16 and im not geting anything to work here if any one can help it would be great thanks
p.s also when i try installing the patches all i get is * Detected unsupported \f0\fs24 Codec and i am very new to osx thanks
p.s also when i try installing the patches all i get is * Detected unsupported \f0\fs24 Codec and i am very new to osx thanks
You have the dump in Rich Text Format, use TextEditor , menu Format and convert to Plain Text.
QUOTE(Taruga @ Sep 9 2007, 06:09 PM)
You have the dump in Rich Text Format, use TextEditor , menu Format and convert to Plain Text.
THANK YOU
so much thats all it was i now have a complete osx86 thanks 
Thanks for the 1.13 tip Taruga 
, got partial success; line out and optical out detect and working BUT, no volume control. Everything plays at maximum volume, although I can use the apps individual controls.
No mic or line in.
Attached my codec.
Cheers for all your work, much appreciated.
P.S. running 10.4.10 w/ 8.10.1 Darwin Kernel
I'm pasting my codec in as I can't do attachments atm, apparently I don't have permission
, got partial success; line out and optical out detect and working BUT, no volume control. Everything plays at maximum volume, although I can use the apps individual controls.No mic or line in.
Attached my codec.
Cheers for all your work, much appreciated.
P.S. running 10.4.10 w/ 8.10.1 Darwin Kernel
I'm pasting my codec in as I can't do attachments atm, apparently I don't have permission
QUOTE
Codec: Analog Devices AD1986A
Address: 0
Vendor Id: 0x11d41986
Subsystem Id: 0x1043818f
Revision Id: 0x100500
Default PCM: rates 0x07f, bits 0x0e, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM: rates 0x060, bits 0x02, types 0x5
Connection: 2
0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1c 0x1c]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1c 0x1c]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1c 0x1c]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
PCM: rates 0x07f, bits 0x06, types 0x1
Power: 0x0
Connection: 1
0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80] [0x80]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
Connection: 2
0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 8
0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
Connection: 2
0x0f* 0x2b
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Connection: 1
0x23
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x22
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x21
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x8f]
Connection: 2
0x19* 0x24
Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081f: OUT HP Detect
Pin Default 0x02214021: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x0a
Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081001f: OUT HP EAPD Detect
Pin Default 0x01014011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0b
Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0837: IN OUT Detect
Pin Default 0x01013012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081737: IN OUT Detect
Pin Default 0x01019015: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x501700f0: [N/A] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0x02a190f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0x018130f0: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x509700f0: [N/A] Aux at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x993310f0: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x50b700f0: [N/A] Telephony at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x50f700f0: [N/A] Other at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x0145f0f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 8
0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
Connection: 3
0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0f
Address: 0
Vendor Id: 0x11d41986
Subsystem Id: 0x1043818f
Revision Id: 0x100500
Default PCM: rates 0x07f, bits 0x0e, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM: rates 0x060, bits 0x02, types 0x5
Connection: 2
0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1c 0x1c]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1c 0x1c]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1c 0x1c]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
PCM: rates 0x07f, bits 0x06, types 0x1
Power: 0x0
Connection: 1
0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80] [0x80]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
Connection: 2
0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 8
0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
Connection: 2
0x0f* 0x2b
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Connection: 1
0x23
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x22
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x21
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x8f]
Connection: 2
0x19* 0x24
Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081f: OUT HP Detect
Pin Default 0x02214021: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x0a
Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081001f: OUT HP EAPD Detect
Pin Default 0x01014011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0b
Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0837: IN OUT Detect
Pin Default 0x01013012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081737: IN OUT Detect
Pin Default 0x01019015: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x501700f0: [N/A] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0x02a190f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0x018130f0: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x509700f0: [N/A] Aux at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x993310f0: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x50b700f0: [N/A] Telephony at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x50f700f0: [N/A] Other at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x0145f0f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 8
0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
Connection: 3
0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0f
QUOTE(BugsBunny @ Sep 6 2007, 03:48 AM)
Hi Taruga,
it's been a while that I have been messing with my iHack's sound card , but might as well get into it again.
So I attached my codec dump from Linux (now, when dragged into your patcher: "unsupported Conexant Codec"). Maybe you feel like checking it out. Don't know if it is at all possible without overwriting the Toshiba-BIOS' faulty DSDT-table with an appropriate kext, but maybe you have a smarter approach than the Linux guys.
Cheers,
Bugs
PS: so you are still looking for an oink invite?
it's been a while that I have been messing with my iHack's sound card
, but might as well get into it again.So I attached my codec dump from Linux (now, when dragged into your patcher: "unsupported Conexant Codec"). Maybe you feel like checking it out. Don't know if it is at all possible without overwriting the Toshiba-BIOS' faulty DSDT-table with an appropriate kext, but maybe you have a smarter approach than the Linux guys.
Cheers,
Bugs
PS: so you are still looking for an oink invite?
Not the best place to post some update I guess but have no idea where to put it.
In Arch Linux kernel .22 (or maybe even in "stock" .22 kernel) there's a patch used that is using _OSI value different than Linux (have no idea what had been used there, but will take a look when I'll get the sources). With this "hack", I don't have to use corrected DSDT to get my soundchip, nvidia, ethernet and wireless working at the same time.
Is there a place I could gain some knowledge about kernel and other stuff?
Cheers,
Mik
Hello,
I try "beta4some861_880models" in my ASUS W6A. Only mic is worked. Could you give me the advise?
Tesla
I try "beta4some861_880models" in my ASUS W6A. Only mic is worked. Could you give me the advise?
Tesla
QUOTE(Taruga @ Sep 5 2007, 06:12 PM)
Answers...
1) Yes/Maybe
2) I'm confused with what codec you have ( I will post the .kext as soon I you confirm) - patcher version used was my own (v1.17), not released yet.
1) Yes/Maybe
2) I'm confused with what codec you have ( I will post the .kext as soon I you confirm) - patcher version used was my own (v1.17), not released yet.
what exactly should i confirm? please tell me what info you need, beside the linux dump i already posted.
ciao
hi Taruga, did you had some time to check about ALC262 on Sony Vaio? i posted screenshoots and ioregs two days ago.
thanks
thanks
finaly my sigmatel 9227 mic works in ubuntu 7.04. only thing i needed to do is to turn on ADCMUX in gnome/alsamixer but there is no ADCMUX switch in OSX. any ideas? microphone LED is on so it is powered but the indicator won't show any input until ADCMUX is turned on. i've used patcher 1.16 on 10.4.10 and it looks like everything works except microphone
Taruga,
Question about the Linux dump.txt that i'm draging over to your patcher....
When i'm in Linux to make the dump from the terminal does the sound need to be working in Linux or is the dump the same if I have sound in Linux or not?
Depending on the Kernel that is loaded in Ubuntu my sound works or doesent work.
the first dump I made was from a livecd and the sound didn't work. Now I did a clean install and now have full working sound in Linux mic, headphones and builtin speakers... Gonna make a new dump and try your patcher agian.
Just was unclear about my above question.
Thanks for all you do!
Question about the Linux dump.txt that i'm draging over to your patcher....
When i'm in Linux to make the dump from the terminal does the sound need to be working in Linux or is the dump the same if I have sound in Linux or not?
Depending on the Kernel that is loaded in Ubuntu my sound works or doesent work.
the first dump I made was from a livecd and the sound didn't work. Now I did a clean install and now have full working sound in Linux mic, headphones and builtin speakers... Gonna make a new dump and try your patcher agian.
Just was unclear about my above question.
Thanks for all you do!
QUOTE(frantisheq @ Sep 10 2007, 10:32 PM)
finaly my sigmatel 9227 mic works in ubuntu 7.04. only thing i needed to do is to turn on ADCMUX in gnome/alsamixer but there is no ADCMUX switch in OSX. any ideas? microphone LED is on so it is powered but the indicator won't show any input until ADCMUX is turned on. i've used patcher 1.16 on 10.4.10 and it looks like everything works except microphone
9227 is working already, I sent some kext to vipersporthp and after 2 attempts, inputs are working. Mic and Line In.Changes will be on v1.17, but for now I´ll post the kext´s at post #1. (I can´t do it atm cause it´s not accepting attachments)QUOTE(Unique13 @ Sep 10 2007, 10:45 PM)
Taruga, Question about the Linux dump.txt that i'm draging over to your patcher....When i'm in Linux to make the dump from the terminal does the sound need to be working in Linux or is the dump the same if I have sound in Linux or not? Depending on the Kernel that is loaded in Ubuntu my sound works or doesent work. the first dump I made was from a livecd and the sound didn't work. Now I did a clean install and now have full working sound in Linux mic, headphones and builtin speakers... Gonna make a new dump and try your patcher agian.Just was unclear about my above question.Thanks for all you do!
There´s no need for the sound to be working as long as it detects your codec
Great work Taruga, with the beta finally I have a fully functional audio system, Line Out, Line In, Intenal Speakers and Microphone, my system is an Intel 915GUX mobo with ALC880; now I have a fully functional Hackintosh!! Thanks again and keep your amazing work. 
QUOTE(elviejo @ Sep 11 2007, 12:32 AM)
Great work Taruga, with the beta finally I have a fully functional audio system, Line Out, Line In, Intenal Speakers and Microphone, my system is an Intel 915GUX mobo with ALC880; now I have a fully functional Hackintosh!! Thanks again and keep your amazing work.
Thanks elviejo, I´m glad it works with you .
Thanks Taruga! Everything is working except i have low volume output.. It's the 882 reatlek..
I know i saw your answer to that problem somewhere in the 100 + pages here.. but i couldn't find it searching again.
I used the ALC882_0x1043e601 with your patcher.
I'll also try better speakers.. Maybe these are just crap.
My other speakers are plugged into my sound blaster card.
Took me 2 weeks to get video working.. Took me 20 minutes to get sound going with your patcher, instructions and files..
I know i saw your answer to that problem somewhere in the 100 + pages here.. but i couldn't find it searching again.
I used the ALC882_0x1043e601 with your patcher.
I'll also try better speakers.. Maybe these are just crap.
My other speakers are plugged into my sound blaster card.
Took me 2 weeks to get video working.. Took me 20 minutes to get sound going with your patcher, instructions and files..
Hi Taruga
My motherboard is an Intel D945GTPLR with Sigmatel 9223. AppleHDAPatcher_v1.10 is the best patch for me cos it´s giving me sound output (Headphones), sound input (Internal microphone). I can't test Digital Out, but it turns on. If there is a better patch for this motherboard please let me know.
Thanks a lot.
Greetings from Mexico City.
My motherboard is an Intel D945GTPLR with Sigmatel 9223. AppleHDAPatcher_v1.10 is the best patch for me cos it´s giving me sound output (Headphones), sound input (Internal microphone). I can't test Digital Out, but it turns on. If there is a better patch for this motherboard please let me know.
Thanks a lot.
Greetings from Mexico City.
Great work man 
,
thanks
Luis
Asus F3F
(with Sigmatel 9200... I think)
,thanks
Luis
Asus F3F
(with Sigmatel 9200... I think)
sony vaio sound VGN-SZ73B work perfectry!
with uphuck 10.4.9 / ALC882 AppleHDA / Patcher_v1.16
thanx taruga
and some solution here http://ja.pastebin.ca/ find many codec dump
with uphuck 10.4.9 / ALC882 AppleHDA / Patcher_v1.16
thanx taruga
and some solution here http://ja.pastebin.ca/ find many codec dump
CODE
Codec: SigmaTel STAC9872AK
Address: 0
Vendor Id: 0x83847662
Subsystem Id: 0x104d0700
Revision Id: 0x100201
Default PCM: rates 0x7e0, bits 0xe, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x59 0x59]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x59 0x59]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x07
Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x0e
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x09
Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x15
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x03211030: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x03a15030: [Jack] Mic at Ext Left
Conn = 1/8, Color = Red
Pin-ctls: 0x24: IN
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0824: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
PCM: rates 0x3e0, bits 0xe, types 0x5
Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 2
0x10* 0x09
Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
PCM: rates 0x160, bits 0xe, types 0x5
Connection: 1
0x13
Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital
Pincap 0x0834: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 4
0x0a 0x0d 0x14* 0x02
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital
1
Address: 0
Vendor Id: 0x83847662
Subsystem Id: 0x104d0700
Revision Id: 0x100201
Default PCM: rates 0x7e0, bits 0xe, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x59 0x59]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x59 0x59]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x07
Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x0e
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x09
Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x15
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x03211030: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x03a15030: [Jack] Mic at Ext Left
Conn = 1/8, Color = Red
Pin-ctls: 0x24: IN
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0824: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
PCM: rates 0x3e0, bits 0xe, types 0x5
Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 2
0x10* 0x09
Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
PCM: rates 0x160, bits 0xe, types 0x5
Connection: 1
0x13
Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital
Pincap 0x0834: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 4
0x0a 0x0d 0x14* 0x02
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital
1
hi Taruga, any good news for ALC262? =)
thanks again for your time
thanks again for your time
I
I have reinstalled osx jas 10.4.8 ex-novo
after, had tried alc262,2, zip and repaired permission, deleting kext cache and rebbot.
after rebooting the message error for the alcinject etc... but the audio work fine true only the internal speaker. no headphone sound.
the file script for permission disk make failur system and i does reset the notebook
I have reinstalled osx jas 10.4.8 ex-novo
after, had tried alc262,2, zip and repaired permission, deleting kext cache and rebbot.
after rebooting the message error for the alcinject etc... but the audio work fine true only the internal speaker. no headphone sound.
the file script for permission disk make failur system and i does reset the notebook
Sweet... I got my AD1986A sound to work on my Lenovo 3000 N100 laptop. I used AppleHDAPatcher 1.13 and my own dump... The only thing is that I don't have volume control and I think there is a fix for this already I'll try to read around here a bit more but if anyone has a solution please let me know.
For those interested this is my dump:
For those interested this is my dump:
CODE
Codec: Analog Devices AD1986A
Address: 0
Vendor Id: 0x11d41986
Subsystem Id: 0x17aa2066
Revision Id: 0x100500
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80] [0x80]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
Connection: 2
0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 8
0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
Connection: 2
0x0f* 0x2b
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Connection: 1
0x23
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x22
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x21
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x8f]
Connection: 2
0x19* 0x24
Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Pincap 0x081f: OUT HP Detect
Pin Default 0x02214021: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x0a
Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Pincap 0x081001f: OUT HP EAPD Detect
Pin Default 0x81114011: [Fixed] Speaker at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0b
Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0837: IN OUT Detect
Pin Default 0x41013012: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081737: IN OUT Detect
Pin Default 0x41019015: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x501700f0: [N/A] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0xc2a190f0: [Both] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x509700f0: [N/A] Aux at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x903300f0: [Fixed] CD at Int N/A
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x90b70130: [Fixed] Telephony at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x90f701f0: [Fixed] Other at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014511f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 8
0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
Connection: 3
0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0f
Address: 0
Vendor Id: 0x11d41986
Subsystem Id: 0x17aa2066
Revision Id: 0x100500
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Connection: 2
0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power: 0x0
Connection: 1
0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80] [0x80]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Connection: 2
0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
Connection: 2
0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 8
0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
Connection: 2
0x0f* 0x2b
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 8
0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Connection: 1
0x23
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x22
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x21
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x8f]
Connection: 2
0x19* 0x24
Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Pincap 0x081f: OUT HP Detect
Pin Default 0x02214021: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x0a
Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x19 0x19]
Pincap 0x081001f: OUT HP EAPD Detect
Pin Default 0x81114011: [Fixed] Speaker at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0b
Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0837: IN OUT Detect
Pin Default 0x41013012: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081737: IN OUT Detect
Pin Default 0x41019015: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x501700f0: [N/A] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0xc2a190f0: [Both] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN Detect
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN Detect
Pin Default 0x509700f0: [N/A] Aux at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x903300f0: [Fixed] CD at Int N/A
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x90b70130: [Fixed] Telephony at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x90f701f0: [Fixed] Other at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014511f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 8
0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
Connection: 3
0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0f
AppleHDA Patcher - 2006/2007 Taruga v1.16
_______________________________________________________
Codec : Conexant CX20551 (Waikiki)
Vendor Id : 0x14f15047
Subsystem Id : 0x103c30b2
_______________________________________________________
* Detected unsupported Conexant Codec
Aid please
Sorry I do not speak English, Single Spanish
_______________________________________________________
Codec : Conexant CX20551 (Waikiki)
Vendor Id : 0x14f15047
Subsystem Id : 0x103c30b2
_______________________________________________________
* Detected unsupported Conexant Codec
CODE
Codec: Conexant CX20551 (Waikiki)
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30b2
Revision Id: 0x100000
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Amp-In vals: [0x83 0x83] [0x8a 0x8a] [0x8a 0x8a] [0x0c 0x0c] [0x83 0x83] [0x0a 0x0a]
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Connection: 6
0x19 0x14 0x15 0x1a* 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081001c: OUT HP EAPD Detect
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 3
0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1e 0x1e]
Pincap 0x0833c: IN OUT HP Detect
Pin Default 0x02a1102e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 2
0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1e 0x1e]
Pincap 0x0833c: IN OUT HP Detect
Pin Default 0x40000180: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x21: IN
Power: 0x0
Connection: 3
0x1c* 0x19 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x0860: IN
Pin Default 0x94330121: [Fixed] CD at Int Right
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x08324: IN Detect
Pin Default 0x95a70122: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
Pin-ctls: 0x21: IN
Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
Conn = RCA, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 1
0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x9a 0x9a] [0x91 0x91] [0x13 0x13]
Power: 0x0
Connection: 4
0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
Amp-Out vals: [0x03 0x03]
Power: 0x0
Connection: 3
0x15 0x14 0x17*
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
Power: 0x0
Connection: 2
0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1a 0x1a]
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x08314: OUT Detect
Pin Default 0x92170110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 3
0x1c* 0x19 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30b2
Revision Id: 0x100000
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Amp-In vals: [0x83 0x83] [0x8a 0x8a] [0x8a 0x8a] [0x0c 0x0c] [0x83 0x83] [0x0a 0x0a]
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Connection: 6
0x19 0x14 0x15 0x1a* 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081001c: OUT HP EAPD Detect
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 3
0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1e 0x1e]
Pincap 0x0833c: IN OUT HP Detect
Pin Default 0x02a1102e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 2
0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1e 0x1e]
Pincap 0x0833c: IN OUT HP Detect
Pin Default 0x40000180: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x21: IN
Power: 0x0
Connection: 3
0x1c* 0x19 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x0860: IN
Pin Default 0x94330121: [Fixed] CD at Int Right
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x08324: IN Detect
Pin Default 0x95a70122: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
Pin-ctls: 0x21: IN
Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
Conn = RCA, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 1
0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x9a 0x9a] [0x91 0x91] [0x13 0x13]
Power: 0x0
Connection: 4
0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
Amp-Out vals: [0x03 0x03]
Power: 0x0
Connection: 3
0x15 0x14 0x17*
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
Power: 0x0
Connection: 2
0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1a 0x1a]
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x08314: OUT Detect
Pin Default 0x92170110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 3
0x1c* 0x19 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Aid please
Sorry I do not speak English, Single Spanish
Thanks to vipersporthp for his fast testing, after 2 attempts inputs are working for stac9227 0x83847618, both mic and line in.
I thought they were working but vipersporthp said it wasn´t. So here´s the fix.
FN: stac9227_83847618.zip available at post #1 .
Sorry, but only today was possible to put it online, cause insanely mac was giving error when trying to add the file.
Enjoy
I thought they were working but vipersporthp said it wasn´t. So here´s the fix.
FN: stac9227_83847618.zip available at post #1 .
Sorry, but only today was possible to put it online, cause insanely mac was giving error when trying to add the file.
Enjoy
IT WORKS!!!!! MY 9227 MICROPHONE IS WORKING! thx Taruga. and vipersporthp of course
Recently I exploded my mac installation and reinstalled 10.4.8 rather than 10.4.10. I retried your alc262 tests and I seem to be getting output through the internal speakers until I try to switch to headphones using hallab or system profiler, I get nothing through the headphones then and if I switch it back to speakers it won't play until I restart the system. it seems like the solution is really close!
QUOTE(ghostparty @ Sep 12 2007, 12:13 AM)
Recently I exploded my mac installation and reinstalled 10.4.8 rather than 10.4.10. I retried your alc262 tests and I seem to be getting output through the internal speakers until I try to switch to headphones using hallab or system profiler, I get nothing through the headphones then and if I switch it back to speakers it won't play until I restart the system. it seems like the solution is really close!
In what hardware did that happen ?
Taruga, can i help testing out ALC262? how can i help you helping us?
QUOTE(matemago @ Sep 12 2007, 01:29 AM)
Taruga, can i help testing out ALC262? how can i help you helping us?
There are some kext´s for alc262 at post #1, did you test them ? Had no success ?
ps - You´re the one with a Sony and mutted sound, right ?
After I saw all you peeps having luck trying older patchers I thought I would give some a try... So far I have had the same results using the 1.13 and 1.16 patchers. But if I try the 1.10 I actually get a input line in and a Internal Microphone. On output I get a Digital output (when clicked on my headphone jack has a red light that shines out of it) and for some reason I show 2 Line out outputs. Still no sound from my built in speakers and nothing from my headphones jack.
yes! thats me! i tried the three of them, but none of them gets oudio out. only in two have working mic. see my post on page 113 i think it is. i even sent you both of ioregs so you can take a look at them.
just let me know how i can help.
just let me know how i can help.
QUOTE(matemago @ Sep 12 2007, 02:15 AM)
yes! thats me! i tried the three of them, but none of them gets oudio out. only in two have working mic. see my post on page 113 i think it is. i even sent you both of ioregs so you can take a look at them.
just let me know how i can help.
just let me know how i can help.
Well atm you can´t
I´m trying to fix it but it´s a hard issue.
well, if you need another ioreg, o to test something, let me know.
Okie, I have mainboard Gigabyte GA-8IK1100 (875P - ICH5R) and the soundcard onboard: Realtek AC'97 ALC658 (5.1). After installed Jas 10.4.8 DVD + Jas 10.4.9 Combo Update + 10.4.10 Update, I got the sound works, no need to edit any kext!
But I have only 2.0 stereo work only! I try to set it up to 5.1 in Audio MIDI Setup but no luck also! I still hear only sound on left and right speakers! I used VLC player as well but the results is the same!
Do U know any solutions for my case?
Edit some values in Audio kext? or any patches?
Please give me some ideas
Thanks in advance!
But I have only 2.0 stereo work only! I try to set it up to 5.1 in Audio MIDI Setup but no luck also! I still hear only sound on left and right speakers! I used VLC player as well but the results is the same!
Do U know any solutions for my case?
Edit some values in Audio kext? or any patches?
Please give me some ideas
Thanks in advance!
QUOTE(matemago @ Sep 12 2007, 01:33 AM)
well, if you need another ioreg, o to test something, let me know.
Ditto here. I will test anything you have...
hello,
i have a sigmatel HD audio device integrated on an INTEL 945g (w3609 emachines). i was wondering if there was a package of some sort that i could use to make audio work. i used viarhine for ethernet and now i only need to fix audio. before i reinstalled i used this package(attached) and it worked. but now it wont:(. can somebody please help.
i have a sigmatel HD audio device integrated on an INTEL 945g (w3609 emachines). i was wondering if there was a package of some sort that i could use to make audio work. i used viarhine for ethernet and now i only need to fix audio. before i reinstalled i used this package(attached) and it worked
. but now it wont:(. can somebody please help.QUOTE(adrianboom @ Sep 12 2007, 02:48 AM)
hello,
i have a sigmatel HD audio device integrated on an INTEL 945g (w3609 emachines). i was wondering if there was a package of some sort that i could use to make audio work. i used viarhine for ethernet and now i only need to fix audio. before i reinstalled i used this package(attached) and it worked. but now it wont:(. can somebody please help.
i have a sigmatel HD audio device integrated on an INTEL 945g (w3609 emachines). i was wondering if there was a package of some sort that i could use to make audio work. i used viarhine for ethernet and now i only need to fix audio. before i reinstalled i used this package(attached) and it worked
. but now it wont:(. can somebody please help.Is your codec sigmatel 9220 ?! or other ?
look at post #1 , there's a repository of codec dumps, download the one you have
Then download applehda patcher v1.16
Then drag the codec dump .txt into the AppleHDA Patcher 'Turtle' icon.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.