dang windows...

you know...somewhere in the back of my mind i seem to recall having a problem like that months and months ago... well, now that it is working, kick back and enjoy

Thanks for the package!! works beautifully on my ga 645p mobo.

Thanks!!!
:-)

it works here too!
thanks so much!

pure f@#$in' genius. i spent hours trying to get this to work thinking it was a driver issue as to not powering the chip, and this fix worked. awesome. ty

Hi all,
I've seen neo tha you have to tweak a little the networkinterface.plist, but i don't know how... My card is recognized as pci ethernet even it's onboard. This is not really a problem, but if it could be perfect i would be cool. Thankks

hi guyz sorry for my bad english only wish to tnx all for this useful post and drivers
now im posting with my realtek 8111 asrock conroexfire integrated
and yes the solution for me too was enabling wake on lan by windows system
greaaaat work!!!!!!!!!!!! tnx all

Oh my God! It worked for me too, now i could use internet in my Hackintosh too... Thnx!
Only wondering, if someone could write down this solution to network drivers in OSX...

finally it worked! awesome! snappy as ever. 945gzm-s2.
I had absolutely no idea how to install this thing but I figured it out.

OSX didn't recognized my 8168/8111 so I installed the driverd and now I can see it in Network window with a green light. I can even log in to my modem properties page in Safari (192.168.2.1) and change settings but I can't go any further. No internet!
Any idea?

By the way, I am a noob and these are my first experinces with OS X so say something i can understand

fantastic driver, worked first time. thanks

Hi all!
Great news: found a driver for RTL8111B/RTL8168B/RTL8111/RTL8168/RTL8111C on Realtek's site here.
don't know actually when they release it, but it shows 2007/1/10 and version is 1.1.1
I have Asus P5PL2 with RTL8111B on-board. Recently used solution from DaemonES link. works fine except that freezes network traffic once a day or two. uninstalled it with provided script, installed manufacturer's solution, rebooted and voila: network settings remains and everything seems to be ok!
testing right now...
have a nice work.

Update:
Nope! Can't find the solution: it still freezes after several hours of working... Maybe it is MacOS's or Kernel's fault?
I think it depends on number of connections...

I'Ve got an Problem with the uphuck 10.4.9 v1.4i for AMD Release and my Realtek 8139 PCI Card.
The card was detected right by the OS, but when i open the Network Settings it shows me a wrong IP (screenshot added). In the Networking Preferences panel it shows me the Ethernet Card orange, also the card runs but the IP was assigned automatically, and so maybe there could be Problems with connecting to the Internet. And thats my problem, i can't connect.
I think it'S because of it detects a wrong IP, but when I set the IP settings by my own, it do not work, too.
Click to view attachment
Can someone help me?

Sorry for my bad englisch -.-

Hello DaemonES

i got a same problem with "sunriis" and have the same modem too. you said to tune his nic setup like those things. i tried all combinationd (not he numbers) and im absolutely sure cables are connected (also i write these with the same mdoem) im really confused. where can i learn what nic settiings i need?

thank a lot sir!!

Driver working after enabling wake on lan in windows device manager.

Asus F3JP
Uphuck 10.4.9v1.4iR2
Realtek 8168/8111

Thanks for your efforts.

Patch worked on Gigabyte P35-DS3L with JaS 10.4.8 (and 9)!

Thanks for your fine work!

Thank you for your efforts, drivers work on great on my Gigabyte GA-945GZM-S2.
However, they always load as en2. Is there a way to have them use en0? I already tried editing the files in /Library/Preferences/SystemConfiguration, without any success

I had installed the IONetworkingFamily.kext and RealtekR1000.kext driver.
but when i installed it,i can connect the Internet by the driver.
but after i restart osx,the system shows can not use,need reinstall.
OMG,It killed me,I dunno how to solve it.
btw,i am not install the driver the same time.

hi!is the new latest driver at the 1st post???

how to install it?? ..im still new in this MAc world..tq....

Hey,

Every few reboots into OS X I get a message saying the driver can no longer be used, is there a solution for this? When it loads it works great, I'd just rather not have to reinstall it every few restarts. Thanks!

Hi All,

I have a mac osx x86 10.4.10, a relatek 8168 I tried to use the R1000 driver but there are some problems with IONetworkfamily.kext and IOPCIFamily.kext. Unfortunately I can't attach any log becouse the pc freezes, maybe some incompatibility problems with the version....

I'm very happy to have mac on my pc however I would like to be able to use the network...

Could someone help me?

Thanks,

Matteo

too bad it doesn't work with RTL8185

maybe a screenshot could be useful

It works fine on this config.

Sharing solutions...

The configuration :
Hackintosh GA-P35-DS3-R with on board RealTek 8168 Ethernet Controller
C2D 2.6 GHz -> 3.2GHz ; 4GB RAM ; 250GB SATA HD ; 250GB IDE HD ; DVD-R IDE
xXx 10.4.10 basic and recommended components only
Additional Drivers :
RealTekR1000 (RealtekR1000.kext from xXx)
JCCool X1950XT driver (v0.1)
alc889a audio (ALCinject.kext and AppleHDA.kext)
AppleVIAATA.kext (from xXx updated with IDE controller ID as http://forum.insanelymac.com/index.php?showtopic=66891 with value 0x2363197b)
note : installation must still be performed with DVD SATA !

What works :
On the Network side :
AppleTalk file sharing with Apple G4 through Ethernet 100Mb
Internet sharing through Apple G4 Airport connection
And :
USB out of the box (including 1GB key, Bluetooth dongle)
X1950XT with QE/CI, dual screen, rotation...
IDE HD and DVD on IDE connectors (issue on large file transfers -> freeze)
Stereo audio (haven't tried more yet)

I have the GA-P35-DS3P Motherboard with Realtek 8111B Lan and it works well with the RT1XXX_1.02.pkg installer in OSX 10.4.10.

However, the installer doesn't work in Leopard! Anyone have a work around for Realtek 8111B for Leopard?

Thanks

Same here, kext won't load on Leopard. Although Leo comes (thanks to one who made release?) with
kext for 8168 and network card is recognized, it doesn't work. I took a peek inside new kext but can't
really figure out the difference between old and new one.

Ok, I changed this in info.plist:

<key>com.apple.iokit.IONetworkingFamily</key>
<string>1.5</string>

to

<string>1.4.3</string>.
Now kext loads and log displays MAC addy but theres an error thet goes something like:
Networking : cannot determine UUID or something like in that style.
Networking applet in sys preferences says that network cable is unplugged.
I think that is due to UUID error 35 that plagues Leo installations.
Funny thing is that after first Leo boot, right after install, network worked then stopped
and couldn't get IP address from DHCP anymore.

same problem

So if there is any solution for 8168 users on Leopard? :-(

My P35C-DS3R's onboard 8168 works in Leo (using the Apple-provided driver), but only if the network cable is connected at boot, otherwise I get an error about MAC timeout in the system log, and it never brings the link up if the cable is connected/other computer/router powered on after boot.

I don't think this Realtek chip is anywhere near as good as the Marvell 88E805x chips Gigabyte used on the 965 boards Decent throughput in Windows, but much higher CPU usage. I don't know why they changed chips.

Well, I am thinking to go for a msi p965 platinum mainboard .. but I have a problem .. the network card on that board is Realtek 8111B .. so I wonder.. it is or it is not working with leo ?

Realtek R8111/8168 works for me in Leopard (Mainboard: Gigabyte P35-DS3P).
If you are a windows user, make sure to enable "Wake on lan after shutdown" in the advanced tab of your network card driver settings dialog (at least for WinXP, no idea if this also applies to Vista)

Me123 - how did you solve that ? what driver did you use ?

Unfortunately I can't give you a walk through. All of this is from out of my head:

My Network worked on the first reboot directly after installing Leopard. After the next reboot (probably to XP) I stopped working. I was able to see a en0 and a Mac Address, but no ping went through.

I tried the Realtek drivers from sourceforge (RealtekR1000_1.04.zip), using the contained "installrelease" script. Played a bit with loaddebug etc. and since my Network still wasn't working I used the "uninstall" script to remove the drivers, so the following might depend on whether the install/uninstall scripts worked correctly in Leopard.

Finally I remembered the "Wake on Lan after shutdown" workaround that was necessary with my old board. I enabled it in XP, rebooted to Leopard and voila, working Lan

I had same problem network work only if i go from Vista -> Leopard (network led is on) and win XP disable its power and driver do not know how to properly turn it on... strange i had same problem with Ubuntu 7.4 but its fixed in Ubuntu 7.10 i bet new driver can fix it or that Wake on Lan after shutdown will help in mean time

WOW! Me123 I owe you! It works with both drivers! Thanks!

Why don't you guys use the MacOS 10.4 driver that's on the Realtek site? It works fine for me.

I've got it installed from the koolkal 10.4.10 package...

i've noticed that if i dont have the ethernet cable plugged into it, mac can't go past the startup apple screen

once in a while the computer also restarts itself, i've got a feeling it's because of the R1000 driver...not 100% sure though
is there anyway to fix this??? sorry i'm a n00b to hackintosh

Here's my setup:
Motherboard: Asrock ConRoe1333-D667 R1.0 Bios 1.30
CPU: Intel Core 2 Duo 2.0Ghz
Memory: 2 X 1GB DDR2
HD: Seagate 500GB SATA

Jas Mac OS X 10.4.8; updated to 10.4.10 with koolkal

Hi i 'm a newbie of osx world Installation of toh rc2 leopard 10.5 stop when integrated lan of my pc is active so i during installation i have disabled it by bios (my motherboard is a asus p4p800s-x) After installation i have enabled my lan (realtek chipset 8101L ) and leopard show me it in utility network as 8139 (led is yellow)and show also mac address and options to configure it but when i go in network preference and try to configure it and insert manually ip of my router and click apply the system freeze and i must restart osx

rtl1.xxx installer freeze in toh rc2 so i have tried to manually install driver from :

https://sourceforge.net/projects/realtekr1000/

but debug installation report this:



batmans-acpi:desktop batman$ cd realtekr1000

batmans-acpi:realtekr1000 batman$ sh loaddebug

file attribute adjusting for RealtekR1000.kext

extension RealtekR1000.kext has potential problems:

Warnings

{

"Kext has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style" = true

}



kextload: extension RealtekR1000.kext appears to be loadable

kextload: RealtekR1000.kext loaded successfully

batmans-acpi:realtekr1000 batman$

In attachements my system log when running loaddebug

After installation network led is green but it's impossible connect to internet What is the problem???

Hello,

i have a big Problem. My Gigabyte P35 DS3R Board was broken and i get a new one. Now ... i cant get ethernet working. The first Board works fine. I had installed the original Realtek-Driver and it works. Now i can test every driver and nothing works. Where can i look? Is there a logfile? Sorry for my english! :-) Any Ideas?

Greetz

HiFiRe

working solution for rtl 8101l

use this procedure with attachement
open terminal and apply these codes.


CODE
sudo su
rm -R /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/AppleRTL8139Ethernet.kext

cp -R <path to>/PCGenRTL8139Ethernet.kext /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/

chown -R root:wheel /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/PCGenRTL8139Ethernet.kext

chmod -R 755 /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/PCGenRTL8139Ethernet.kext

touch /System/Library/Extensions

shutdown -r now

hi, I have the same problem.
Mine is a Realtek 8168 and it worked the first time I installed Leopard. but, after that the led is green, but the internet refuses to work.

I'm using the R1000 kext.

any ideas?

I still can get this to work. I have a GA-945GZM-S2 with a RTL8110SC and I cant get internet to work.
Plz help

please

Realtek RTL8111B/RTL8168B/RTL8111/RTL8168/RTL8111C
official driver for Mac OS X (Intel):

ftp://210.51.181.211/cn/nic/RTGMac_v1.1.6.zip
ftp://202.65.194.212/cn/nic/RTGMac_v1.1.6.zip
ftp://61.56.86.122/cn/nic/RTGMac_v1.1.6.zip

You also may find these links on Realtek site.

I have MB ASRock ConRoe 945-G DVI and this driver works fine with integrated NIC.
I'm using it right now on JAS 10.4.8

and how do i install the kext?

DaemonES
plz check my error , what have to do..??

bash-3.2# ./installdebug
file attribute adjusting for RealtekR1000.kext
kernel extension RealtekR1000.kext has problems:
Authentication failures:
{
"File owner/permissions are incorrect (must be root:wheel, nonwritable by group/other)" = (
"/Users/phreakazoidz/Desktop/RealtekR1000/build/Debug/RealtekR1000.kext"
"/Users/phreakazoidz/Desktop/RealtekR1000/build/Debug/RealtekR1000.kext/Contents/Info.plist"
"/Users/phreakazoidz/Desktop/RealtekR1000/build/Debug/RealtekR1000.kext/Contents"
"/Users/phreakazoidz/Desktop/RealtekR1000/build/Debug/RealtekR1000.kext/Contents/MacOS/RealtekR1000"
"/Users/phreakazoidz/Desktop/RealtekR1000/build/Debug/RealtekR1000.kext/Contents/MacOS"
)
}
Warnings:
{
"Kext has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style" = true


Thanks

yes i have the same problème i want the solution please

thanks so mutch

I tried this driver with Leopard and had a no-go. Now the ethernet hardware is not even being detected.

Is there a solution for this?

Guys, you just need to recompile this {censored} driver. So, just do it. I have no Leopard installed.

Realtek RTL8111B/RTL8168B/RTL8111/RTL8168/RTL8111C
official driver for Mac OS X (Intel):

ftp://210.51.181.211/cn/nic/RTGMac_v1.1.6.zip
ftp://202.65.194.212/cn/nic/RTGMac_v1.1.6.zip
ftp://61.56.86.122/cn/nic/RTGMac_v1.1.6.zip

You also may find these links on Realtek site.

try this driver from realtek
This driver work with leopard....!! and tiger!