many are willing to buy hardware especially for osx

please everybody with a properly working rig:
post it here and tell us what you did to make it work properly


post the rig specs
one line per component - and if it worked out of the box or not

then write about more about the rig
what you did to make it work properly
issues you havent sorted out yet
things you havent properly tested yet

and
would you recommend your rig as a primary workhorse ?



does it have any of the following common problems (please pm me if you want to add something here)

motherboard:
sound in
stereo sound out
network (especially gigabit)
sleep
firewire
usb2.0
booting from firewire or usb 2.0
target disk mode
sata
raid functionality

graphics card problems:
dual display
display resolution
open gl - games, 3d apps

network:
filesharing with windows

applications:
imovie crashing




if you have anything to add to this post just pm me or mods please feel free to add/change things


KEEP IT CLEAN
this is supposed to be a list
not a chat

My system has following components.

ECS 915P-A mainboard
- s-ata works perfect (standard ICH6 so has 4 S-ata ports but no Raid)
- USB (appears) to work perfect (My logitech 4000pro webcam does, except the sound is dodgy probably a software thing as logitech program is supposed for 10.3)
- audio (C-Media CMI9880) out works in Stereo but there's no main (desktop) volume slider. Individual volume slider of apps work perfect.
- audio in untested. I suspect it doesn't work
- GigaLAN (Realtek RTL8110S-32) is working as 100TX-lan but since its a PCI-controller it won't reach full potential anyway so doesn't bother me anyway. Can set it to GigaLAN in preferences but doesn't seem to improve transfer rates.

This board has both DDR1 and DDR2 (DDR2 gives no significant improvement on i915 chipset but its nice to be able to use it if you want). It also has both AGP and PCI-E so you might still be able to use that AGP Radeon 9600. I haven't tried that slot as I only have a PCI-E card. I remember a 9600 working. This board has NO firewire like its expensive sibling PF-4 but that also has other type of LAN controller (Marvell 88E8001-LKJ) which i suspect gives more headache in OSX86 and PF-4 gives no better performance either (even with DDR2).

Saphire 144L Radeon X1600pro GDDR2 256MB: A faster card doesn't give much significant improvement in OSX86 according to XBench. X1600 does "feel" faster then X600 but I dunno if its just my imagination or real (system profiler 'profiles' faster indeed). I previously owned an X600pro and also used an X800 for awhile. Xbench gives about same performance figures on all these cards while X1600 is supposedly significantly faster then X600.
Installed with Boris installer (I couldn't get the manual editing of kext files to work) and works beautifully
- CI, QE and QE 2D working. Rotation supported. Not tried dual monitor (Suspect that doesn't work) but if used in single monitor mode then both VGA and DVI work
- NO mouse tearing
- NO pointer dissapearing after using full screen application/game
- NO more disturbing double pointers (e.g. Spinning colour wheel + arrow at the same time with Mouse-locator). Usuall shadow under pointer just like real mac.
- resolution AND proper colour depth swithing. Latter didn't work very well with X600pro and Callisto.

I only found (so far) that the Dashboard ripple efect is weird.

I use a HT P4 3GHz 6x0 series (the one with 2MB Cache). This gives a preformance rating of 97 in Xbench. Which means this rig is about as fast as a Dual G5 2GHz. Maxtor s-ATA hdd (take notice that this board only has ONE P-ATA connector!!!) S-ATA drives appear in BIOS as IDE-devices and get fully seen under OSX86 as S-ata :-)

I have Samsung SH-W162C p-ata DVD-burner. Works perfectly with Toast under OSX86 (tested Toast 6 and Toast 7 Titanium). Both with DVDs and CDs.

I'm using 10.4.5 as this version has apparantly best hardware compatibility with present hardware. I have been tempted to upgrade but since OpenGL is faulty in 10.4.7 I decided to stick with 10.4.5. Especially since most ppl are using older drivers with 10.4.7 so why switch anyway. As for 10.4.6 the only upgraded part on that is bluetooth but I got my MSI USB bluetooth antenna working great on 10.4.5 with my cellphone (SE K750i) so again 'why bother'. At least sending out files from the phone works great. Haven't tried anything else because I didn't expect it to work in the first place so I was pleasantly surprised to see a bluetooth icon on my desktop anyway.

Sleep button seems to get computer to sleep but wake up doesn't work. I have a Linkworld LK1000 keyboard with (working) power button so I can switch on/off the "mac" from the keyboard. Some o/t multimedia keys also work (e.g. audio-mute). I've put all in Linkworld Mac-look-a-like case with silent 420W PSU.

All in all I'm very happy with this configuration. It has enough parts like a real mac (X1600, 8x DVDV burner e.g.) or dev-mac (i915) to get it working... lets say 97% of a real mac, at 97% of dual G5 2GHz speed for about 55% or 60% the price of a real Intel iMac (the cheapest model). I think that's a pretty good deal.

I hope this the info you need?

Regards,

EPDM

lol I can't imagine a P4 being anywhere near as fast as a dual G5. In my expereince, P4 is a slow hot POS

I get xbench of 240 on 3.6ghz

ASUS P5W DH Deluxe
Everything but the remote, sound in and onboard wifi (can't test that com port or whatever it is) - sound needs modded to work, changing numbers in some files - firewire works
sleep - sleeps fine until display driver installed
target disk mode - obviously not
raid functionality - don't know

Intel E6600 @ 3.6GHz
what can I say? It is fast and both cores work

2GB G.Skill NR PC2-6400
It works...

ATI X1800XT
Plays games at 1920x1200 with full CI and QE without mouse tearing - DVI doesn't display any picture and have to use one of my vga adaptors! Sucks as I use a high res 1920x1200 display. Don't need a 2nd display so haven't tested that - needed modded with boris patch

Pioneer DVR109
Works with full support from the OS

ASUS DVD-E616A2
Reads disks fine (it isn't a burner)

Seasonic S12 430W
Great silent PSU

Zalman CNPS9500 & VF-900
The VF-900 is so much quieter then the stock cooling and also has a lower idle than competitors

Antec P180
Great case just be careful not to scratch it!!!!!!!!!!!!!!!!!!

It also file shares fine Jas 10.4.6


I use a SATA HD

This is a great post, maybe we should put it in the post-it section ?

Graeme > You didnt mentionned if you're using a Pata or Sata Hard drive?

mods, do this conflicts with the HCL on the wiki? May be we should have a space for this kind of stuff on the HCL.... "recommended hardware" or something

The figures quoted are from xBench. The info supplied also says that 100 is equal to a Dual core G5 2GHz so having 97 means that this rig is about as fast as a dual core G5 2Ghz. This is according to xBench. Now that you think that a P4 is POS is your opinion but at least my rig works for 97% (appart from volume slider on desktop, audio in and Gigalan being 100TX-lan, these are the ONLY 3 things I noticed so far, of which volume slider and gigalan being 100TX are no big deals anyway. Personally I don't miss audio-in either.




both cores???? I thought this was a quad core cpu.

Anyway. Your rig seems "interesting" but I think it'll cost a bot more then 700 euro, doesn't it?


Regards,

EPDM

the E6600 is a dual core (Core 2 Duo). Quad Core has not been released yet.

I also have the Asus P5W DH Deluxe, but with a Pentium D 940 instead of Core 2 Duo (waiting for the price to drop).

And just as graeme43 said, everything works great. SATA, Both NICS (Dual Gigabit), Detects all memory, sound works with a small patch (2 channel stereo, no input) My BENQ CD/DVDR also works fine right through the os.

Not sure what else there is. I am getting ready to test it on my Toshiba Qosmio G15-AV501 1.8Ghz P-M

I have Intel E6400 @ 2.13GHz CPU on ASUS P5N32-SLI SE Delux motherboard. The Myzar 10.4.5 DVD wont even boot on my system. I have Radeon x1600 PCIE card. Wondering if you are using the same version, if so did you experience any problems with installation?

My system is in my signature works perfectly, Xbench is 151...

Motherboard Gigabyte GA-945p-s3 US$ 95
Nic Realtek add card US$ 5
Firewire Add card Via based US$ 5
CPU E6400 Core Duo 2 US$ 220 OC to 2.61 ghz (like a pricey E6700 US$ 550)
Case Thermaltaje Tsunami Dream US$ 110
PSU Thermaltake Purepower 450Watts US$ 70
CPU FAN Zalman CU9500 US$ 50
Pioneer DVD 11D Burner US$ 45
Hard Disk WD 320Gb SATA II US$ 95
Linksys USB Wireless G adapter
Zalman Quiete control 5 1/4 Fan speed control US$ 25
2 Zalman 120 mm Case fans US$ 22
1 Thermaltake Silent 90mm side fan US$ 9
Video Card Asus Eax X1600XT US$ 150
Samsung LCD 20.1" Wide Screen monitor @ 1600x1050 QE CI and rotate support, beam sync disabled

Games run wonderfull.

Sound Azalia 883 patched and working two channels
Lan by cheap PCI nic card not anymore thanks to DaemonEs drivers now my onboard gigalan works 100%
Firewire by Cheap Via based Firewire PCI card

Problemes:
The only problem have is just one monitor support or mirroring, i don't have extended monitor support.
No line in yet.

BTW, 240 xbench? almost incredible....

Here's one you can buy off the shelf, but you'll need to upgrade using JaS 10.4.6 PPF1 [for ATI IDE controller], and THEN installing the AMD 10.4.7 update:

eMachines T6412/T6524 - $350-$600
•Athlon 64 3400-3500+ <--SSE3 capable, SSE2 working w/ installer patches
•512-1,024MB Dual Channel RAM
•2x IDE <-- working /4x SATA <-- currently non-working
•Realtek 100Mbps LAN <-- working
•Realtek AC97 <-- non-working, replace with $30 Turtle Beach Micro Advantage USB
•Radeon X200 128MB shared <-- non-working, replace with $70 X300 PCIe w/ MouseLocator for full QE/CI/Q2DE w/o tearing*
•16x DLMF DVDRW <-- working, and fully supported using PatchBurn
•7x USB 2.0 / 2x FireWire 400 <-- working

Functionality Issues:
•sound in
•sleep
•sata

Does it make a good Primary machine? Well, I've used it exclusively since the end of March for everything ranging from iMovie/iDVD projects, to running and organizing my daily life. The best part about this rig is the performance potential. It started out with a single-core 3500+ and has since grown to a dual-core 4200+ with no ill effects. RAM has doubled to 2GB Dual Channel as well. I don't know of a better, cheap way to do it!

My rig is on my sig. everything works but the remote, onboard wi-fi, audio only out and did not test the firewire. it's a blast.

Gateway GT5014

I got this rig working with all of the wonderful help/patches found here:

Added to the baseline rig:

2 Additional Gb or RAM (3 total)
ADD2 DVI Adapter
120 Gb hard drive for OSX86

I use the motherboard built in F10 function to select my boot drive so I don't need to partition.

Sound works out of the black connector (stereo) and sounds great when I jam iTunes.

Video card works out of DVI on my BENQ 19" 1280x1024 display -- gorgeous! I just bought the new wingnuts 2 and played it over the weekend. The graphics are great and fast! I have allocated the full 224 Meg RAM to video.

DVD +/- works

The Media Card bay works

It all works! And might I say it ROCKS! I have a G4 1Ghz with 1.25 Gb or RAM, and the above rig is orders of magnitude faster. It boots in about 15 second -- just sick!

Oh, BTW, I bough the rig at a CompUSA closeout price of $539 with 1 Gb RAM and 250 Gb hard drive.

I added $36 for the ADD2, $280 for the memory, and had a spare 120 Gb SATA drive lying around.

My total out of pocket to have a dual boot Windows MCE2005 and OSX86 10.4.7 system was $885 (I spent like $90 on the drive some time ago, so counting that $975).

Best,

MDG.

My rig is in my sig, it all works fine, sound is out of blue portg but otherwise all works (firewire gigabit ethernet, etc etc,) havent tried to use RAID on it yet but i will get around to it one day.

Dell Dimension DIM9100
motherboard: Dell 945P [Baed on Intel]
sound in - Works , at least I could connect the mic !
stereo sound out - Works as well
network (especially gigabit) - No , it does not show up. But i think its possible to patch it

sleep - Works without macvidia [VESA]
firewire -N/A
usb2.0 - Works
booting from firewire or usb 2.0 - N/A
target disk mode - Not supported
sata - Works
raid functionality - N/A

graphics card problems: No QE/QI
dual display - N/A
display resolution - LCD Native (1280x1024)
open gl - games, 3d apps - N/A

But if I use back my original Dell X300SE , it works . I get QE/QI , its just that i am having issues with the mouse tearing thingy. For now I am sticking with 7300GT [As i have heard , Macvidia's team are working hard]

network: ASUS WL-167 WiFi Card [ works with Ralink's driver]
filesharing with windows : Not yet tested

everything else works. Pretty much , OSX86 works out of the box. You would just need to patch ATI's graphics card and the sound driver [and the network driver].....One drawback , its using the SSE2 kernel , because of Intel/Dell's SSE3 problem thingy , other than that it works fine. The performance is amazing , I could say its par with a 1.8Ghz Dual G5.

Motherboad: MSI K8N Neo2 Platinum 54G

CPU: AMD Athlon™ 64 Processor 3200+

CPU Info: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 SSE3

RAM: 2 x 512MB

HD: Serial-ATA Bus: Maxtor 6V160E0 WDC WD1600JS-08NCB1

CDROM: DVDR Plextor PX-750A

Built-in Ethernet:

Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0

Built-in FireWire:

Type: FireWire
Hardware: FireWire
BSD Device Name: fw0

Audio: AC 97 2 stereo channel - Integrated


AirPort:

Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 192.168.1.64

Bluetooth:

Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem

GeForce 6600 GT:

Chipset Model: GeForce 6600 GT
Type: Display
Bus: AGP
VRAM (Total): 128 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x00f1
Revision ID: 0x00a2
Displays:
J15AAC/3/U/R:
Resolution: 1024 x 768 @ 75 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
PHILIPS 107S:
Resolution: 1024 x 768 @ 85 Hz
Depth: 32-bit Color
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported

USB Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBOHCI
Microsoft Wireless Optical Desktop® 1.00

USB High-Speed Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBEHCI
USB TO IDE:
Capacity: 74.53 GB


System Software Overview:

System Version: Mac OS X 10.4.8 (8L2127)
Kernel Version: Darwin 8.8.1
Boot Volume: Tiger


Native install 8.8.1 kernel to sata hdd using OSX_1048_AMD_SSE3.rar

full support to all hardware

Dell Dimension 1100

Intel Celeron D 2.6Ghz - SSE3 and fully functionly speed, etc

Intel Graphics 82855 Extreme 2 - Fully supported at 1024x768 but no qe & ce as it's not supported by card (this is a bad card, onboard)

SoundMax Build in Audio, Microphone too - works with changing speaker channels easily done in Preferences and microphone just works.

Keyboard runs normal but uses Windows key as Apple, alt is better. Mouse supports scrolling and rightclick (logitech or Dell)

All USB ports are detected and work

3 Drive bays all work with CD/DVD but no internal floppy (as it's not supported anyways)

Everything on this system works fine, but I recommend getting a Radeon x1600 or higher for best performance (do not get x1300).

You don't really need all the specs, as this system is basic system and is ready to go with 10.4.8 and latest kernels (when update is available). It lacks a good graphics card and has a celeron which can be a little slow but is great for non-mac-os-x-games.

My Rig;;

OSX 10.4.8 (latest kernel afaik)
AMD 4800x2 939
3gb DDR400 Dual-Channel
OSX on IDE Drive (for convenience)
XP on SATA Drive
OSX Able to access all Drives
Nforce4 DFI Motherboard
Onboard LAN,Sound,SATA working,
DVDRW/CDRW working (NEC and MSI)
6800Geforce 256mb card - QE/CI working in 1680 x 1050 on my 23" beauty.

Only complaints (feel free to rectify)

@ and ". I have a PS2 keyboard, not a USB one. Any fixes I have found, dont work
Adobe CS3 beta doesnt work. at all. Just crashes out straight away. Could be as its a beta software, but who knows.
That annoying message I get EVERY BOOT saying that "Titan.kext cannot be loaded". I know it cant, I removed it myself.
CS:S not running as fast as I want it to, randomly crashing, and not reconising that ive swapped control and alt around in OSX. then again OSX doesnt reconise that (see USB keyboard note)

Aside from that, its been my main OS for me and my family now (wife and 2 kids) since I installed. Wife has adapted to Safari as opposed to Firefox / IE7 (vista) easily enough, and has very few complaints especially as she is a fan of itunes, and says that the OS "fits better with itunes than vista". Best opinions are from newbies, IMHO. Myself, Ive done a bit of dreamweaver, email, VLC, newsgroup, bittorrent, photoshop (CS2), illustrator, and loved every moment of it. Only boot XP to play games / program (only learning), so id give OSX on a hackintosh a massive thumbs up!.

Also, built a friend a custom PC for hackintosh.

Used a cheap Asrock motherboard (945 chipset)
Intel 2.13ghz core2duo
1gb DDR2 800
120gb SATA2 HDD
7300GT 256mb GFX.
Worked out of the box bar LAN and Audio. LAN was a installer to run (took all of 3 seconds) and audio needed a kext edit. Given i was absoloutley leathered at the time, I installed OSX and appplied both fixes without a hitch (to my major suprise).
Friend has used the hack for a week now, loves it and is getting to grips with his day-to-day tasks on it (inc MSN Skype and pr0n surfing) with no complaints. starting to chuck the big apps at it (photoshop et al) and hes loving it still.

Both of us love the RSS screensaver, if only it was a bit more customisable!!! (hint hint apple).

Both pc's are more than usable as main PC's / OS's, and both bench between 100-120 (with the AMD benching higher than the Intel, which shocked me.)

Hope that helps.

See Below In Sig

Asus Z71V (M7V) 15.4" Laptop

Jas 10.4.8 (Semthex 8.8.1 SSE2 kernel)

Pentium M 2.0GHz
Speedstep not working, if I boot without AC adapter, CPU stays at 800MHz even when I plug it back in, CPU stays at 2.0GHz if I startup with AC adapter plugged in and then unplug.

1Gb (512Mbx2) Dual Channel DDR2 533MHz (PC4200)
80Gb 7200RPM IDE HD

Nvidia GeForce 6600 Go 128Mb
Full video acceleration at native resolution (1680x1050x32 WXSGA+) using Natit Drivers.
TV-Out not working, Dual monitor via VGA not tested.

Realtek ALC880 On-board Audio
Stereo out through laptop speakers only, Input not tested, built-in mic not working.
Line-out/Headphones not working.
Using AC97 - volume slider doesn't work and output is a little fuzzy and delayed (had to switch Primary PCI Match to 0x26688086)
Using Azalia - volume slider works fine and output is great (had to switch Primary PCI Match to 0x10ec0880, use fixed kext available on this forum)
Using HDA - I can't seem to get the HDA Patcher to work right even using my own codec dump from Linux.

TSST L532A 8x DVD-+RW DL
DVD playback is perfectly fine
Reads burned CDs and DVDs, burning not yet tested.

SD Card Reader
Not tested, but I assume it doesn't work (which doesn't matter since I don't use it anyway).

Marvell Yukon Gigabit Ethernet
Works perfectly with the skge kext posted on this forum, my device is 0x432011ab, it was detected as "Built-in Ethernet".
My home network is only 100Mb so I haven't tested how fast it goes.

Intel Wireless 2915ABG Mini-PCI
Working now with iwi2200 kext (search google code for iwi2200, it's a Darwin port of the FreeBSD driver based on ipw2200 for Linux).
Detected as AirPort Wireless, but it doesn't show up in "About this Mac".
WEP/WPA/PSK not yet working.
Radar in the taskbar indicates when you're connected, but doesn't show available networks or which one you're connected to.
It's a little on the slow side, but it works.
It's always on, I can't seem to switch it off.

On-board USB2.0, Firewire 400
Working perfectly fine.

On-board 56K Modem
Not detected, not tested, not working. I don't care, I don't use this anyway.

PCMCIA Slot
Not tested, I don't have any cards to test with.

Synaptics Touchpad
Scrolling is not working, doesn't disable when USB mouse is plugged in.
Tapping and Tap-Drag works fine.
"Ignore accidental input" doesn't seem to work.

Audio DJ Keys and Fn Keys not working.

Sleep not working.

Overall it's a nice and fast laptop for OS x86, some things aren't working but it works well enough to use on a daily basis. I triple boot XP, OS X, SuSE Linux.

Intel Bad Axe 2
C2D e6300/6400/6600 etc, or xeon 3040/3050/3060 // don't take e4300 - it havn't intel VT technology.
XFX GeForce 7300 GT / 7600 GT 256mb

is 100% compatible config for OSX.

Mac OS X 10.4.8 working Native and VMware:
CPU: Opteron 165 @2.4Ghz (s939 Toledo, SSE3)
MoBo: MSI K8N Neo 4 Platinum nForce4 Ultra
GPU: Geforce 6600 PCI-E 256MB W/QE & CI, TV out also (working with Natit and 10.4.8 Kexts)
Memory: 1 GB RAM
LAN: onboard nForce4 (working but not used) and Marvell Yukon (working)
Sound:
• Onboard AC97 (ALC850 CODEC) 5.1 ch (working)
• M-audio USB Sonica Theater 7.1 ch (working) Digital output works
• Sound Blaster Audigy Platinum (not working) but I use it's FireWire
Storage:
• HD: 2 Western Digital SATAII 160GB 7200 rpm and 2 Maxtor SATAI 80GB 7200 rpm on nForce4
• DVD Burner: Pioneer DRV-A07 (Apple Shipped/supported)
• CD Burner: LiteOn LTR-23327S (supported)
Other:
• Silicon Image SATA ports working with AppleVIAATA.kext trick but i don't use since AppleNforce.kext
• BlueTooth with Microsoft USB dongle
• Wireless with Ralink and Zydas USB dongles
• TV Card BT848 chip works barely with iTV
• Logitech USB Orbit CAM and iSight working
• Canon USB N656U Scanner working
• Microsoft Wireless Mouse working with MS Mouse 6.0 drivers
• USRobotics 56K Serial Modem Working
• VMware fusion working with different OSes
• Parallels BootCamp option working with GUID Trick
• Windows XP on SATA RAID

This is the first system I built, 100% compatible in every way. No .kext editing, no driver installations, nothing. The only flaw was sound-in didn't work.

Motherboard: Intel D915GAVL.
Processor: Pentium 4 524. 3.06 GHz. LGA775, Hyperthreading, SSE3, NX bit, EM64T. REPLACE THE STOCK HEATSINK.
Memory: 1.5GB DDR333 SDRAM
Graphics: On-board. GMA900. Installed the old-school GMA900 enabler. Worked perfect. No problems at all.
Audio: Intel High-Definition. Realtek ALC860. Worked perfect. No patches required. No sound-in.
Hard Drive: 250GB SATA Samsung SpinPoint. No complaints.
Optical Drives: 16x Lite-On DVD-R/-RW/+R/RW. Works perfect; 52x Lite-On CD-R/RW. Works perfect.
Networking: Built-in Intel 10/100. Worked perfect. No patching.
SATA: Operational and working perfect.

Pros: Motherboard is DIRT CHEAP and 100% compatible in every way. SATA, Graphics, Sound, NIC. Apple used this board in the developer machines.

Cons: Lackluster CPU support (Pentium 4 and Celeron D). DDR-support only. GMA900 isn't great. Becoming slowly outdated.

This is the second system I built. It's really just a new motherboard in my old rig:

Motherboard: Intel D945GTPLR
Processor: Pentium 4 524. 3.06 GHz. LGA775, Hyperthreading, SSE3, NX bit, EM64T. REPLACE THE STOCK HEATSINK.
Memory: 1.0GB DDR2 400 SDRAM
Graphics: On-board. GMA950. Used JaS' 950 enabler.
Audio: Intel High-Definition. Sigmatel 9223. Sound out of sound-in port. Kind of poor audio quality at low volumes. Patch required.
Hard Drive: 250GB SATA Samsung SpinPoint. No complaints.
Optical Drives: 16x Lite-On DVD-R/-RW/+R/RW. Works perfect; 52x Lite-On CD-R/RW. Works perfect.
Networking: Built-in Intel 10/100. Required a .kext edit.
SATA: Operational and working perfect.

Pros: Motherboard is very cheap if you find it on eBay. Everything works, but LAN and sound requires a patch.

Cons: Does not support the Core line processors. Pentium D is the best you can do. Sound isn't "perfect", but good. GMA950 isn't the most wonderful graphics adapter ever.

my :
I have almost exactly the same setup. Must say the motherboard works pretty perfectly in 10.4.8, it even has firewire!

I am using the Pentium 4 630 CPU with 2gb of ram, and I must say it works quite well. If I upgrade, I would go straight for the Core 2 line of CPU's though, so I would get another motherboard. Best CPU for this mobo is the Pentium D 930, it has VT extensions and Dual Core...

No crashes of iMovie or any apps yet

I upgraded my graphics to Nvidia 7600GS 256mb, fully working with Natit.

Compared to the GMA 950, Core Image programs are MUCH faster, eg:Chocoflop, and when I enabled Quartz 2D Extreme the user interface sped up a LOT as well, expose much smoother etc.

Running 10.4.8 on newest kernel.

ASUS K8NE-Deluxe:
ac97 sound - works without a hitch
gigabit ethernet - needed forcedeath patch (I think that is the name of the patch. It came with the install CD prepatched.)
SATA - hardware has 2 types of sata on it physically on two parts of the board. 1 works and 1 doesn't. The one that does work needed to be patched. Patching the install CD did the trick to make the iso equivelent of tubgirl's release.
AMD 3200+ (SSE2) - Has anyone ever had an issue with their cpu? Pointless to bring it up.
2gig pc3200 DDR - Has anyone ever had an issue with their memory? Pointless to bring it up.
Nvidia Geforce 5200 FX - Installed a patch + AGPGart and have full CI/QE support without any issues.

Am I forgetting anything?


Computer is 99.9% functional. I left off the .1% because installing certain programs require minor tweaks sometimes like parallels.

xbench score: 89.77

notes: I recommend if you want to use parallels to run windows and os x at the same time have at least processor with 2 cores to support the load, and at least memory as fast as ddr2, or using mass amounts of memory turns the computer into a snail because the memory is slower being only pc3200. It is far from required, but personally I would like to have things a tad smoother. I think once parallels supports direct x fully, then the speed might change.

Dell Vostro 200 Slim works perfectly if you add a cheap Geforce 7300
I got this pc 2 weeks ago, on sale for $359, and installed KalyWay 10.5.2
(No extra drivers needed)

PROCESSOR Intel® Core™2 Duo Proc E4500 (2.20GHz, 2MB L2 Cache, 800FSB) edit
OPERATING SYSTEM Genuine Windows® XP Home Edition edit
PRODUCTIVITY SOFTWARE No Pre-installed Productivity Software edit
MONITOR Dell 20 inch Widescreen E207WFP Analog Flat Panel Display edit
MEMORY 2GB Dual Channel DDR2 SDRAM 667MHz - 2DIMMs edit
OPTICAL DRIVE Single Drive: 16X (DVD+/-RW) Burner Drive edit
HARD DRIVE 250GB Serial ATA Hard Drive (7200RPM) w/DataBurst Cache™ edit
VIDEO CARD Intel® Graphics Media Accelerator 3100 edit
FLOPPY OR MEDIA READER No Floppy Drive edit
MODEM & WIRELESS No Modem Option edit
SOUND Integrated 7.1 Channel Audio