Any Drivers for: Labtop NetworkCard: Marvell Yukon 88E8038


Thanks

i bought a Atheros AR5006X 108MBps Mini-PCIE card off ebay and it works great.
all i had to do was install the apple airport extreme 02-2007 update.
it works nativly as an airport card.
Im running JaS 10.4.7 w/ Jas 10.4.8 SEE2 Only Update.

I just installed 10.4.8 and my intel pro\100 doesn't work. of course neither does my dial up modem, or my sigmatel hd audio.

Hey /hardware/, I'm having trouble finding exactly the wireless card i need. I've read many examples of working cards.. but they fail to mention the version of osx they are using. then when they do, it turns out not to be the same one I have. When it is, its a laptop running it. So I decided to stop lurking and just ask:

P4, 512 mem(the max allowed ), Compaq mobo,
OsX 10.4.6 - JaS
Card needs to support ad-Hoc Mode
Speed must be at least 54 mbps (id actually prefer that over anything faster)
Must be PCI

Id really like if it were a hassle free installation without the need for messing with config files and xcode installations and all the such. I'm not an advanced Mac user but I hope to learn with this new installation.

Thanks in advance.

P.S. For all those posting their working cards.. please, ffs please put in all the specs about your comp you can.

Pic unrelated.

Okay Please forgive I am putting this in the wrong place or asking in the wrong place eveyrone likes to do thing different. Please do not spam me or go nuts on me please. ok with that out of the way.

I just installed 4x's and is now running 10.4.8 JAS
My Hardware
Celeron 2.4 GHZ INTEL Neo2 865 / IHC5
Nnvida FX5600 256 DDR Video Was very excited about this card working it is a work horse !!!!
512 mb Ram
AC97 Audio works great
I have an onboard nic ( broadcom 440x I am going to assume but not sure )
and I have Realtek 8139
I have a lot of this topic and I still need help
Please help me to get anyone of these two cards to work.

Aagain I am sorry if I am asking this in the wrong place or asking again.

Dont bother, guy. They dont answer any questions on here.

the nforce4 lan isnt working and tried to use one kext, but i dont make to work.....
im put a netserver 10/100TX lan Adapter*an intel based chip*but also dont work....
mmmm about the vendor id and product id where i find that?

Okay Folks heres the thing.
I have RTFM about 10 times and either I am missing something along the way (Possibl) or it just does not want to come alive. I have followed all the examples tried them again and again and again I cannot get my on board NIC to work I have the following
MOBO Intel 865 PE Neo 2
CPU Celeron 2.4 ghz
JAS 10.4.8 realease ( love this by the way have installed 8 times now I am professional installer now )
Video Nvida Fx 5600 256 DDR MB ( got working after 3rd install after me paying attention )


not sure if the onbard nic is the Broadcom 440x or the RealTek.
After looking at the manual for the MOBO it could be either Intel Pro/100 or Pro/1000 Still not sure
I have seen a ton of posts saying the Pro/100 works how did you get it to work. What did you do?

Anyways I have a Realtek 8139 standalone card as well. My system is not seeing them. Yes I am going to try moving the card to a different slot to see if t sees it.
I have also seen a ton of posts stating this card card again how did you get it to work what did you do? In steps plesae??

I have also used a Intel Pro/100 ( not seeing this card either )

You all keep saying it works in Native Mode ( which I am going to assume for the second means put it in stupid and turn on the machine and there you go )

I need help I got the OS up and running. The On Board sound works with no flaws.

Please I am asking for some what of dedicated help. I am not a dummy when I comes to computers.
( ok time for horn blowing ) I have a 2k3 server A Suse Linux Box 2 XP Boxes a Linux/WinXp Laptop
Have been in Computer 20 yrs now ( ok horn blowing done )

Please help me figure this out. I did download the Kext for Realtek from Here b/c someone said the KEXt was messed up in the distro. ( <<< big linux word there )
I am not asking for you to move the moon or the sun or the stars ( unless you think you can do that )

I just need some help. I know I am taking the chance of getting flamed that is fine I can take the heat Please help me

Name [00000001] NetServer 10/100TX PCI LAN Adapter
Adapter Type Ethernet 802.3
Product Type NetServer 10/100TX PCI LAN Adapter
Installed Yes
PNP Device ID PCI\VEN_8086&DEV_1229&SUBSYS_10CB103C&REV_08\4&72ACDAA&0&3820

anyone tell me what are the vendor id and product id

VEN_8086 = Vendor ID = Intel
DEV_1229 = Device ID = 82557/8/9/0/1 Fast Ethernet LAN Controller

http://www.pcidatabase.com/vendor_details.php?id=1302

The problem is that the driver is for PowerPC and not Intel or Universal.
/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8255x.kext

Try to find a a Mac i386 driver of use an other ethernet card.

Okay Folks No need to for dedicated help I found a 8139 A Tx card this one works great I did not realize that the card I using was 8139b << b card bad naughty .. A card good yay ... I am up and on the internet all other things work... oh and DO not install the Apple 10.4.10 update it done did break my computer. Wait for the Jas updater

i change the netserver network card to a SMC1244TX my internet is alive by now and thanks to roxen for the help

My RTL 8110SC is an gigabit (1000 MB/s) onboard network chip ans runs up to 10.4.9 natively without any extra installation.

hey guys, i got the mac os x for intel and amd 1.0.4.8 and it installed fine but my built in eathernet dosnt get any internet. in the beggning i chosed built in eathernet then nothing happens safari dosnt recive any network connection, and my modem says it is connected to it. the light is green. then after i reinstalled and chosed dsl modem and still nothing, this is what i have intel pro/100 VE. i tried installing my sbc yahoo dsl cd,the cd starts working fine but then it was going to configure my modem then shuts down. any way i can get internet with the built in network.

Your answer fpresiado should be here http://forum.insanelymac.com/index.php?showtopic=42782 , as listed in the link from my sig.

Not sure if I posted this result here too from my system. Intel Pro/1000GT works under JaS 10.4.7 and .8, but fails under Uphuck 1.3 with an instant system lock-up when accessing HTTP.

I've done a search, but it's hard to find info on this. How does the Intel PRO/1000 PT ethernet card fare? It is PCI-E.

PCMCIA Cardbus RTL 8139 Realtek Lancard [EN 238] from argosy [www.argosy.com] not working

Surprisingly my Linksys WMP54G v2 (important) works native and is detected and connects on first boot. Works as AirPort, brilliant, never a single problem, plus also works under most Linux distros and all versions of Windows including x64 ones.

Laters

Don't know what network card I actually have...

But the network card on ULi M1573 southbridge does not work out the box for me on myzar 10.4.8

Can you go into this futher please? How do you 'build' the project?

Thanks/.

Marvell Yukon 88E8053 PCI-E Gigabit Ethernet worked outta the box...Jas 10.4.8.

This is on a notebook though...It's seen as built in hardware.

Download and intstall Xcode
Download the sourcecode
Open the project with Xcode
Press the build button and install the driver.

But you can also use the IONetworkingFamily from 10.4.7
http://forum.insanelymac.com/index.php?sho...mp;#entry378337

Not working a network card Realtek PHY RTL8201CL...HELP!

Intel Pro/100 S Server network adapter works natuarly with uphuck 10.4.9 DVD v1.3

I just installed 10.4.9 v1.4 on a dell 2400 2.6 celeron 1gig pc2700 nvidia 5500 pci

i was able to get the microsoft mn-730 wireless g card working by changing the pci14e4 entry to 4325.
now card works perfect

hope this helps sombody

Broadcom 59xx onboard LAN - Did not work at all... OSX86 doesnt recognize it. seems others have 4xxx are getting happier, did anyone got clue with this one?

Vostro 1400 Intel Core2Duo T1.8, Intel 865, 512MB, with Disabling Flash Cache and SATA to ATA in BIOS is my setup. Somehow SATA doesn`t work for me.

My network adapter it has Marvel 88E1116 Gigabit Ethernet Controller onboard. It cant work probably till now. Is there anybody who can make it work probably ???? Your supply will be greatly appreciated.thanks in advance !!

The 88E1116 is not in the Yukon family of products, it is likely the drivers for Yukon won't work. Marvell Alaska single port product page.. I have a GA-M55SLI-S4 motherboard with that same PHY, and I gave up and bought a pci Belkin F5D5000 which I found uses the Realtek 8139 chipset. I wish I could modify the Wiki to point that out. I bought that NIC for the OS X drivers included, but those don't work for me with 10.4.10.

As for the 88E1116 it isn't an ethernet controller, just a PHY (Physical Interface), in all likelihood yours is an nForce mobo. The forcedeth driver is what needs to be tweaked to get the 88E1116 working. On my mobo, the forcedeth driver finds and identifies the PHY but it doesn't initialize.

Hey guys!

Long time no post, but I just picked up a Netgear WG111v2 over at TigerDirect and managed to get it to work in (JAS) OSX86 10.4.7 using the Realtek RTL8187L drivers! (Scroll down for the universal binary...) I am unable to connect due to the network in my home area being secured and I haven't installed my own router just yet, but I was still able to pick up the network using the Realtek utility!!!!

Once I get my router up and running again I'm going to be wiping my hard drive and trying to install the latest SEE2 capable OSX86 release on my Inspiron5100 and see if I can make it a permanent Hackintosh until I can raise the cash needed to buy one from the Apple store. I just started a new job so I'm hoping that won't be as long as it looks. LOL!

--bornagainpenguin

why get yourself stressed trying to put your wireless to work if you can buy for just $100,00 a compatible one that works on both mac/windows. Interested??? go to:

http://www.sonnettech.com/product/aria_pci.html

A PCI Airport Extreme Just for U.

HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter
works like charm

Gigabyte P35-DS3P Buildin Ethernet (RLT8111) Works well.

Just bought this card... due to advise on from this loser....

It has a bloody Marvell Chip on it and the ID are completely different...

Just don't do it...

major novice question, sorry...

I am trying to load 10.4.9 uphuck DVD on a IBM Thinkpad T43 (2668-NU3). Works great, except:
1. Broadcom NetXtreme Gigabit ethernet card
2. Intel Pro/Wireless 2915ABG NIC

The wiki has the T43 listed as:

Thinkpad T43
- JaS 10.4.8 SSE3 DVD (semthex kernel)
- Intel Pentium M 750
- 60GB 5400rpm HDD - SATA controller recognised and working correctly
- 64MB ATI Radeon X300 - recognised as PCIe card, resolution can be set in com.apple.Boot.plist
- CD-RW/DVD-R Multi-Burner - recognised correctly
- Intel 802.11a/b/g wireless(MPCI) - recognised as airport
- Bluetooth - works correctly
- Modem(CDC) - doesn't work
- 1Gb Ethernet(LOM) - Broadcom chip, works with a lot of fix (insainelymac.com)
- UltraNav - works correctly
- AC97 audio - works

So am I just using the wrong DVD??? Would 10.4.8 work better?

Thanks in advance,

Dan

I struggled for 4 days trying to get my on-board NIC working. Finally gave up and bought the cheapest NIC at staples -- Linksys LNE100TX. Plugged it in, booted OSX, loaded the Tulip driver, and I was on the net. Best $15 I've spent.

There are probably better/cheaper cards you can buy on the net, but stores are carrying less and less wired network cards. This is the cheapest one I found in a local store, and it works perfect. If you want instant gratification and have a Staples near by, I recommend it.

I have an "old" MSI socket 754 motherboard (Neo? FISR? can't remember) with on-board Realtek. It reports itself as "Realtek RTL8110S/8169S" on boot. 10.4.8 did NOT recognize/enable it. I did not try to troubleshoot as my video card is a Radeon 9600 and that didn't work either, so OS X will have to wait until my next computer in a few months.

I have a Realtek 8149 (I think) fast ethernet family on-board adaptor. I have been using OS X x86 for a while now using this ethernet adaptor perfectly. About last week I tried installing vista on another hd and unpluged my OS X drive. Now when I go back to OS X it cant seam to connect to the router. The orange light is on, on the back of the pc but the light on the router does not come on and it cant get an ip from the router. I can boot back into windows and it will work. The lights on router will come on etc. Has anybody got any idea as to what i could do about this? I have just tried re-installing and its still not working.
Thanks.

My old old old HP EN1207D-TX PCI Ethernet adapter works(I pulled it out of an 8 or 9 year old HP pavilion)
i believe its based on the rtl8139
vendor ID is 1113
device ID is 1211

i was deperate because i couldnt get the nforce ethernert working or my airpace wifi adapter, so i put this in, and it worked.
my facial expression pretty much matched this

I have a P5W-DH Deluxe board, with Jas 10.4.8 i have one of the ethernet ports working has Built-in Ethernet, now with the uphuck 10.4.9 v1.4i r3, the 2 ethernet ports appears has PCI ethernet, how can i put has built-in, because i use Maya and he dont found ethernet ...

Many Thanks

Just wanted to let people know that Edimax is making some good Wireless USB Adapters. I personally purchased this one EW-7318USg http://www.edimax.co.uk/en/produce_detail....1&pl2_id=44 works great using the Ralink Drivers, 2nd driver in order from this page http://www.ralinktech.com/ralink/Home/Support/Macintosh.html

realtek...
installed the via rhine driver.. and it works

Hello, I am a new OSx86 user, and I have the same wireless NIC as you. I am using JaS 10.4.8 for AMD, and I did find those drivers you mentioned. Could you post how you got this stuff to work, as I am an absolute newbie to MacOS and haven't even touched the terminal yet...

In the meantime, I'll go try and fix it myself. If I get results, I will post them as a follow-up

Didn't get the Netgear USB sticky workin, DID get my built-in Marvell Yukon working, and pulled a Sweex (Ralink 2500) WiFi PCI card out of the closet. Now writing on OSx86!

Can't get both RTL8139 and d-link dge-530t working! for marvell (d-link) I've swapped device id in kext, but nothing happened. System profiler says that i have no pci cards... weird

I have the same exact card, but it isn't working. The card is ntegrated, is yours PCI?

Hi!

Im using HP Pavilion dv6425ca, and uphuck_10.4.9 v1.3
Intel Pro/wireless 3945a
I tried to install the driver, but it didnt work.
Now, I want to buy a wireless adapter or usb adapter.
Does anyone know which one is compatible, please tell me?
Thanks.

I'm looking for a mini PCI wireless card that will work with both Linux and Mac os x86 on my Dell D600. Ralink lists drivers for both os, and I assume Windows would work with it too. Would any wireless card with a Ralink chipset work? I was looking at the RT2560F for example (there is a Benq one with that chip).

So are there any actual PCI based desktop wireless Draft-N card that 100% work well? because I have read many reviews specifically to do with the Belkin and Linksys offerings and people have been saying that performance is generally atrocious.
I was tempted by the WMP300N but apparently even after the firmware upgrade it is still intermittent and does not achieve expected speeds.

I am running a Lenovo ThinkPad X60 with the intel 3945abg. I still have faith in the developers workingon that project so i dont want to tear into my tablet and replace the card with an atheros.

I am running 10.4.9, just wondering if anyone knows of a USB or PCMCIA card that will run. I have been browsing around for a few hours and cant really find a solid PCMCIA card that everyone likes...

thanks!

I just was at target with some of my buddies and i stumbled across a Belkin G+ MIMO wireless USB adapter. Part #F5D9050.

I ran the install CD and just like that I had full internet. No problems, saves wireless profiles. I would reccommend this to anyone with a laptop or desktop. its cheap (around $40 or $50) and is available everywhere. It came with a docking station so you dont have to have a little stick sticking out all of the time.

i hope this might help you guys somewhat.

Broadcom 440x works with Uphuck 10.4.9 1.4i r3 in my HP nx6310. I used the patch suggested by the installer. The only strange thing is that if I reboot the laptop without pulling out the power cord the network card doesn't work.
Marvell Yukon 88E8001 on my P4P800-E fully works with Uphuck 10.4.9 1.4i r3 with the patch suggested by the installer.