Full Version: What network cards work?
Wonder if compusa.com sells anything wireless that works in mac os?
Asus WL-167g USB
All it needed was the macOS driver. Even plays nice with my WEP.
http://www.newegg.com/Product/Product.asp?...N82E16833320107
driver:
ftp://dlsvr01.asus.com/pub/ASUS/wireless/...iver_OS1039.zip
And it's cheap.
All it needed was the macOS driver. Even plays nice with my WEP.
http://www.newegg.com/Product/Product.asp?...N82E16833320107
driver:
ftp://dlsvr01.asus.com/pub/ASUS/wireless/...iver_OS1039.zip
And it's cheap.
Ok, I've read this topic and searched for everything "HP" in it.
I've got a HP DV1440 US (HP DV1000 series) notebook with the Intel 2200 chip. I'm ready to swap it out tomorrow, but I want to make sure I get a card that my BIOS will load (not be blocked by HP!) and will work under OS X. Everywhere I am reading I find troubles with HP specifically because of the BIOS whitelisting of specific cards.
I'm running JaS 10.4.6 --> update JaS 10.4.7.
Thanks, and if this post makes a lot of people mad because I do not actually have a working chip, PM me and I'll delete it right away. I'm sorry in advance if I messed up! :-/
I've got a HP DV1440 US (HP DV1000 series) notebook with the Intel 2200 chip. I'm ready to swap it out tomorrow, but I want to make sure I get a card that my BIOS will load (not be blocked by HP!) and will work under OS X. Everywhere I am reading I find troubles with HP specifically because of the BIOS whitelisting of specific cards.
I'm running JaS 10.4.6 --> update JaS 10.4.7.
Thanks, and if this post makes a lot of people mad because I do not actually have a working chip, PM me and I'll delete it right away. I'm sorry in advance if I messed up! :-/
Sorry to re-post --
Will broadcomm 4306 series card work? I know 4309 will, but what about 4306? Thanks.
Will broadcomm 4306 series card work? I know 4309 will, but what about 4306? Thanks.
Confirmation:
On HP Pavilion dv1000 series notebook PC, HP/Broadcomm BCM94306 Rev. 4 Mini-PCI card works, with OS X 10.4.6 including installation of JaS support for Wireless devices. Worked flawlessly, no hacking necessary, network icon appeared automatically. This is mildly significant as anybody with an HP notebook knows that most cards are blocked by HP BIOS.
On HP Pavilion dv1000 series notebook PC, HP/Broadcomm BCM94306 Rev. 4 Mini-PCI card works, with OS X 10.4.6 including installation of JaS support for Wireless devices. Worked flawlessly, no hacking necessary, network icon appeared automatically. This is mildly significant as anybody with an HP notebook knows that most cards are blocked by HP BIOS.
Realtek 8111 (Board: PL5LD2) not working =(
Need help please
Need help please
Netgear Wireless PCMCIA 108G with Atheros chipset is working and reports as Airport on OSX 10.4.6. Too bad Kismac cannot set this card to passive mode...
i just bought a GIGAFAST WF748-CUI USB wireless a/b adapter from geeks.com for $15.95. it's a Zydas ZD1211revB chipset so it uses the ZD1215Mac.kext.
it works with the Zydas 4.5.7.0 drivers from here. it's subject to their normal "unplug it before you shut down or you have to uninstall/reinstall the software" bug, let's hope they fix that.
i'm running 10.4.6 on a thinkpad t43p.
it works with the Zydas 4.5.7.0 drivers from here. it's subject to their normal "unplug it before you shut down or you have to uninstall/reinstall the software" bug, let's hope they fix that.
i'm running 10.4.6 on a thinkpad t43p.
QUOTE(jafar @ Aug 15 2005, 12:34 PM) 
My Intel Pro/100 works perfectly. OSX thinks it's "Built-in Ethernet." Hah!
Onboard Intel CSA (8xx series chipsets, especially 865/875 series with ICH5/5R/5SR southbridges) in both 10/100 and 10/100/1000 variations is detected/works when enabled. Uses PRO/100 (10/100) or PRO/1000CT (10/100/1000) drivers in Windows. Surprisingly, it's usually picked up on the fly by OS X as *built-in Ethernet*.
Can anyone confirm whether th NETGEAR MA521 PCMCIA card will work with OSx on x86 machine?
looking for RTL8168 kext! (0x816810ec)
I have a Broadcom 5788 (169c) working as of right now, I am writing to you using firefox on my Fujitsu Hackintosh.
All I did was downloaded the bcm5701ethernet.kext available on this forum, set permissions so I could edit the file, added an entry for my device in the info.plist for the kext, and then used hexedit to replace each entry of 66 81 FA 59 16 with 66 81 FA 9c 16. Then I changed hex address 37554 of the exec inside the kext to EB 71. Then, I repaired permissions with disk utility, and rebooted. I have dhcp working and I couldnt be happier. The directions came from Hater, ual808, and others in the bcm570x thread.
All I did was downloaded the bcm5701ethernet.kext available on this forum, set permissions so I could edit the file, added an entry for my device in the info.plist for the kext, and then used hexedit to replace each entry of 66 81 FA 59 16 with 66 81 FA 9c 16. Then I changed hex address 37554 of the exec inside the kext to EB 71. Then, I repaired permissions with disk utility, and rebooted. I have dhcp working and I couldnt be happier. The directions came from Hater, ual808, and others in the bcm570x thread.
DFE-530TX+ (currently $9.99 at Best Buy) Works under 10.4.6 HotISO with the ViaRhine.kext Release build found here ViaRhine.kext CLICKY CLICKY!!
It does not work with the inlcuded drivers from Dlink.
Installed per instructions and came right up on next reboot.
It does not work with the inlcuded drivers from Dlink.
Installed per instructions and came right up on next reboot.
My builtin bc44 will not work for some reason. It is detected and picks up the IP address from my router but that is about it. Network Utility shows the link speed at 0 but shows the link status as active. Even setting it to full dupex 100baseTX manually does not work.
Got a Realtek 8139 from local computer shop for $6.00 works great. It is stange that the bc44 did not work though works fine in Gentoo. Oh well just disabled it in bios and used the 8139.
Got a Realtek 8139 from local computer shop for $6.00 works great. It is stange that the bc44 did not work though works fine in Gentoo. Oh well just disabled it in bios and used the 8139.
My Intel PRO 100 did NOT work on 10.4.6, however, my 3Com 905 did/does. Next challenge is the sound card, and getting the video to refresh right.
3Com Gigabit LOM (3C940) - Doesn't work. 
Anyone have a work-around, I'd be really thankful.
If not.. I guess I'll have to use Winblows until I get the chance to build in another card.
Anyone have a work-around, I'd be really thankful.
If not.. I guess I'll have to use Winblows until I get the chance to build in another card.
I scanned most of the pages about Network cards in the forum - what is almost never mentioned is the SPEED of wireless Network adapters - I need one (USB, PCMCIA or miniPCI Express) which delivers up to 108 Mbps (NOT 54 Mbps).
Can someone please post some names of hackintosh compatible WiFi cards which offer 108 Mbps in here?
Thanks,
Bugs.
Can someone please post some names of hackintosh compatible WiFi cards which offer 108 Mbps in here?
Thanks,
Bugs.
Belkin N10117 - Works
ROFL, my Marvel Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller (on board) WORKS! 
Though, I have to drag my computer all the way downstairs to the router to get it to work... I need my Wireless to work... if only D-Link DWL-G120 was supported =P
Though, I have to drag my computer all the way downstairs to the router to get it to work... I need my Wireless to work... if only D-Link DWL-G120 was supported =P
QUOTE(dublea @ Aug 26 2006, 12:44 AM)
if only D-Link DWL-G120 was supported
Try this: http://forum.insanelymac.com/index.php?showtopic=15362
I've only used this on 10.4.3 and 10.4.5
Realtek RTL8110S-32 (onboard GigaLAN of ECS i915P-A) is working as 100TX-lan but since its a PCI-controller it won't reach full potential anyway so doesn't bother me anyway. Can set it to GigaLAN in preferences but doesn't seem to improve transfer rates.
Regards,
EPDM
Realtek RTL8110S-32 (onboard GigaLAN of ECS i915P-A) is working as 100TX-lan but since its a PCI-controller it won't reach full potential anyway so doesn't bother me anyway. Can set it to GigaLAN in preferences but doesn't seem to improve transfer rates.
Regards,
EPDM
Hi to all!
please help me! Does anyone know to make Broadcom 440x working in Jas Mac OS 10.4.6 or 10.4.7?
i tied so many times to solve this problem using diferent solution but failed
Please give a link or ful tultorial how to make it working!!!!
Thank you!!!
please help me! Does anyone know to make Broadcom 440x working in Jas Mac OS 10.4.6 or 10.4.7?
i tied so many times to solve this problem using diferent solution but failed
Please give a link or ful tultorial how to make it working!!!!
Thank you!!!
I have a Broadcom 440x on my Inspiron 9300, and it does work but not all the time. It'll work 1 out of 5 times, I don't know why it'll only work sometimes and not all the time.
How do I find out if the kext loaded correctly and how to reinitialize the hardware from inside Mac OSX?
Using Jas 10.4.7 install.
I also have an Intel 2200BG wireless nic, but I've been following the other threads for that.
How do I find out if the kext loaded correctly and how to reinitialize the hardware from inside Mac OSX?
Using Jas 10.4.7 install.
I also have an Intel 2200BG wireless nic, but I've been following the other threads for that.
I've been able to get it working as long as I disconnect the network cable before the laptop is turned on. Once Mac OSX is loaded I reconnect the cable and I have internet access now. I've been able to duplicate this a few times with 100% success, but if I left the network cable hooked up when I would boot into OSX after restarting from Windows I would run into the problem again.
AppleBCM440XEthernet is loaded in all instances but it's like it jams when the network cable is left in during boot up.
Here's a boot-up log of when I had the cable disconnected.
And here's when I had the cable hooked up.
Hopefully this will help.
AppleBCM440XEthernet is loaded in all instances but it's like it jams when the network cable is left in during boot up.
Here's a boot-up log of when I had the cable disconnected.
CODE
Sep 7 14:03:10 localhost kernel[0]: hi mem tramps at 0xffe00000
Sep 7 14:03:10 localhost kernel[0]: PAE enabled
Sep 7 14:03:10 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 7 14:03:10 localhost kernel[0]: vm_page_bootstrap: 514641 free pages
Sep 7 14:03:10 localhost kernel[0]: mig_table_max_displ = 71
Sep 7 14:03:10 localhost kernel[0]: CPU identification: Intel(R) Pentium(R) M processor 1.73GHz
Sep 7 14:03:10 localhost kernel[0]: CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST
Sep 7 14:03:10 localhost kernel[0]: CPU extended features: XD
Sep 7 14:03:10 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Sep 7 14:03:10 localhost kernel[0]: [RTCLOCK] frequency 1730000000 (1729106180)
Sep 7 14:03:10 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Sep 7 14:03:10 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Sep 7 14:03:10 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Disabled
Sep 7 14:03:10 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 7 14:03:10 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 7 14:03:10 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Sep 7 14:03:10 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Sep 7 14:03:10 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Sep 7 14:03:10 localhost kernel[0]: Security auditing service present
Sep 7 14:03:10 localhost kernel[0]: BSM auditing present
Sep 7 14:03:10 localhost kernel[0]: disabled
Sep 7 14:03:10 localhost kernel[0]: From path: "uuid",
Sep 7 14:03:10 localhost kernel[0]: Waiting for boot volume with UUID 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29
Sep 7 14:03:10 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Sep 7 14:03:10 localhost kernel[0]: IOPCCardBridge::start failed
Sep 7 14:03:10 localhost kernel[0]: USB caused wake event (EHCI)
Sep 7 14:03:10 localhost kernel[0]: AppleIntelPIIXPATA: ICH6-M SATA (CMD 0x170, CTR 0x374, IRQ 15, BM 0xbfa8)
Sep 7 14:03:10 localhost kernel[0]: FireWire (OHCI) VendorID 1180 ID 552 PCI now active, GUID 364fc000325b00e1; max speed s400.
Sep 7 14:03:10 localhost kernel[0]: AppleIntelICHxSATA: ICH6-M SATA (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0xbfa0)
Sep 7 14:03:10 localhost kernel[0]: in6_ifattach_loopback: failed to configure the loopback address on lo0 (errno=55)
Sep 7 14:03:10 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntelPIIXATARoot/PRI@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080AH Media/IOFDiskPartitionScheme/Untitled 2@2
Sep 7 14:03:10 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Sep 7 14:03:10 localhost kernel[0]: Jettisoning kernel linker.
Sep 7 14:03:10 localhost kernel[0]: Resetting IOCatalogue.
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 3
Sep 7 14:03:04 localhost mDNSResponder-108 (Dec 25 2005 11: 57:53)[51]: starting
Sep 7 14:03:04 localhost memberd[59]: memberd starting up
Sep 7 14:03:10 localhost DirectoryService[69]: Launched version 2.1 (v353.2)
Sep 7 14:03:10 localhost lookupd[58]: lookupd (version 369.5) starting - Thu Sep 7 14:03:10 2006
Sep 7 14:03:11 localhost kernel[0]: AppleBCM440XEthernet: Ethernet address 00:11:43:73:a4:ea
Sep 7 14:03:11 localhost launchd: Server 2f07 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[58]: exited abnormally: Hangup
Sep 7 14:03:11 localhost kernel[0]: VID: vram [d0000000:08000000]
Sep 7 14:03:11 localhost diskarbitrationd[57]: disk0s2 hfs 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29 MAC OSX /
Sep 7 14:03:11 localhost lookupd[85]: lookupd (version 369.5) starting - Thu Sep 7 14:03:11 2006
Sep 7 14:03:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Sep 7 14:03:12 localhost loginwindow[86]: Login Window Started Security Agent
Sep 7 14:03:12 localhost diskarbitrationd[57]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled
Sep 7 14:03:14 localhost mDNSResponder: Adding browse domain local.
Sep 7 14:03:18 localhost configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 14:03:18 kaer-filatems-computer configd[55]: setting hostname to "kaer-filatems-computer.local"
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:23 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:28 kaer-filatems-computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[85]: exited abnormally: Hangup
Sep 7 14:03:28 kaer-filatems-computer configd[55]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-network
Sep 7 14:03:28 kaer-filatems-computer configd[55]: posting notification com.apple.system.config.network_change
Sep 7 14:03:28 kaer-filatems-computer lookupd[153]: lookupd (version 369.5) starting - Thu Sep 7 14:03:28 2006
Sep 7 14:03:28 kaer-filatems-computer configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 14:03:29 kaer-filatems-computer configd[55]: target=enable-network: disabled
Sep 7 14:03:10 localhost kernel[0]: PAE enabled
Sep 7 14:03:10 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 7 14:03:10 localhost kernel[0]: vm_page_bootstrap: 514641 free pages
Sep 7 14:03:10 localhost kernel[0]: mig_table_max_displ = 71
Sep 7 14:03:10 localhost kernel[0]: CPU identification: Intel(R) Pentium(R) M processor 1.73GHz
Sep 7 14:03:10 localhost kernel[0]: CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST
Sep 7 14:03:10 localhost kernel[0]: CPU extended features: XD
Sep 7 14:03:10 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Sep 7 14:03:10 localhost kernel[0]: [RTCLOCK] frequency 1730000000 (1729106180)
Sep 7 14:03:10 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Sep 7 14:03:10 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Sep 7 14:03:10 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Disabled
Sep 7 14:03:10 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 7 14:03:10 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 7 14:03:10 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Sep 7 14:03:10 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Sep 7 14:03:10 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Sep 7 14:03:10 localhost kernel[0]: Security auditing service present
Sep 7 14:03:10 localhost kernel[0]: BSM auditing present
Sep 7 14:03:10 localhost kernel[0]: disabled
Sep 7 14:03:10 localhost kernel[0]: From path: "uuid",
Sep 7 14:03:10 localhost kernel[0]: Waiting for boot volume with UUID 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29
Sep 7 14:03:10 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Sep 7 14:03:10 localhost kernel[0]: IOPCCardBridge::start failed
Sep 7 14:03:10 localhost kernel[0]: USB caused wake event (EHCI)
Sep 7 14:03:10 localhost kernel[0]: AppleIntelPIIXPATA: ICH6-M SATA (CMD 0x170, CTR 0x374, IRQ 15, BM 0xbfa8)
Sep 7 14:03:10 localhost kernel[0]: FireWire (OHCI) VendorID 1180 ID 552 PCI now active, GUID 364fc000325b00e1; max speed s400.
Sep 7 14:03:10 localhost kernel[0]: AppleIntelICHxSATA: ICH6-M SATA (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0xbfa0)
Sep 7 14:03:10 localhost kernel[0]: in6_ifattach_loopback: failed to configure the loopback address on lo0 (errno=55)
Sep 7 14:03:10 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntelPIIXATARoot/PRI@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080AH Media/IOFDiskPartitionScheme/Untitled 2@2
Sep 7 14:03:10 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Sep 7 14:03:10 localhost kernel[0]: Jettisoning kernel linker.
Sep 7 14:03:10 localhost kernel[0]: Resetting IOCatalogue.
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 1
Sep 7 14:03:10 localhost kernel[0]: Matching service count = 3
Sep 7 14:03:04 localhost mDNSResponder-108 (Dec 25 2005 11: 57:53)[51]: starting
Sep 7 14:03:04 localhost memberd[59]: memberd starting up
Sep 7 14:03:10 localhost DirectoryService[69]: Launched version 2.1 (v353.2)
Sep 7 14:03:10 localhost lookupd[58]: lookupd (version 369.5) starting - Thu Sep 7 14:03:10 2006
Sep 7 14:03:11 localhost kernel[0]: AppleBCM440XEthernet: Ethernet address 00:11:43:73:a4:ea
Sep 7 14:03:11 localhost launchd: Server 2f07 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[58]: exited abnormally: Hangup
Sep 7 14:03:11 localhost kernel[0]: VID: vram [d0000000:08000000]
Sep 7 14:03:11 localhost diskarbitrationd[57]: disk0s2 hfs 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29 MAC OSX /
Sep 7 14:03:11 localhost lookupd[85]: lookupd (version 369.5) starting - Thu Sep 7 14:03:11 2006
Sep 7 14:03:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Sep 7 14:03:12 localhost loginwindow[86]: Login Window Started Security Agent
Sep 7 14:03:12 localhost diskarbitrationd[57]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled
Sep 7 14:03:14 localhost mDNSResponder: Adding browse domain local.
Sep 7 14:03:18 localhost configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 14:03:18 kaer-filatems-computer configd[55]: setting hostname to "kaer-filatems-computer.local"
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:22 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:23 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 14:03:28 kaer-filatems-computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[85]: exited abnormally: Hangup
Sep 7 14:03:28 kaer-filatems-computer configd[55]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-network
Sep 7 14:03:28 kaer-filatems-computer configd[55]: posting notification com.apple.system.config.network_change
Sep 7 14:03:28 kaer-filatems-computer lookupd[153]: lookupd (version 369.5) starting - Thu Sep 7 14:03:28 2006
Sep 7 14:03:28 kaer-filatems-computer configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 14:03:29 kaer-filatems-computer configd[55]: target=enable-network: disabled
And here's when I had the cable hooked up.
CODE
Sep 7 13:53:07 kaer-filatems-computer kernel[0]: (76: coreservicesd)tfp: failed on 0:
Sep 7 13:53:07 kaer-filatems-computer configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 13:53:07 kaer-filatems-computer kernel[0]: (76: coreservicesd)tfp: failed on 0:
Sep 7 13:53:08 kaer-filatems-computer shutdown: reboot by kaerfilatem:
Sep 7 13:53:08 kaer-filatems-computer kernel[0]: (215: ps)tfp: failed on 0:
Sep 7 13:53:08 kaer-filatems-computer SystemStarter[206]: authentication service (219) did not complete successfully
Sep 7 13:53:08 kaer-filatems-computer kernel[0]: (215: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (247: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (247: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (248: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (248: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (249: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (249: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (250: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (250: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (251: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (251: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (252: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (252: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (253: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (253: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (254: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (254: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (255: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (255: ps)tfp: failed on 0:
Sep 7 13:53:44 localhost kernel[0]: hi mem tramps at 0xffe00000
Sep 7 13:53:44 localhost kernel[0]: PAE enabled
Sep 7 13:53:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 7 13:53:44 localhost kernel[0]: vm_page_bootstrap: 514641 free pages
Sep 7 13:53:44 localhost kernel[0]: mig_table_max_displ = 71
Sep 7 13:53:44 localhost kernel[0]: CPU identification: Intel(R) Pentium(R) M processor 1.73GHz
Sep 7 13:53:44 localhost kernel[0]: CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST
Sep 7 13:53:44 localhost kernel[0]: CPU extended features: XD
Sep 7 13:53:44 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Sep 7 13:53:44 localhost kernel[0]: [RTCLOCK] frequency 1730000000 (1729081220)
Sep 7 13:53:44 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Sep 7 13:53:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Sep 7 13:53:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Disabled
Sep 7 13:53:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 7 13:53:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 7 13:53:44 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Sep 7 13:53:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Sep 7 13:53:44 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Sep 7 13:53:44 localhost kernel[0]: Security auditing service present
Sep 7 13:53:44 localhost kernel[0]: BSM auditing present
Sep 7 13:53:44 localhost kernel[0]: disabled
Sep 7 13:53:44 localhost kernel[0]: From path: "uuid",
Sep 7 13:53:44 localhost kernel[0]: Waiting for boot volume with UUID 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29
Sep 7 13:53:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Sep 7 13:53:44 localhost kernel[0]: IOPCCardBridge::start failed
Sep 7 13:53:44 localhost kernel[0]: USB caused wake event (EHCI)
Sep 7 13:53:44 localhost kernel[0]: AppleIntelPIIXPATA: ICH6-M SATA (CMD 0x170, CTR 0x374, IRQ 15, BM 0xbfa8)
Sep 7 13:53:44 localhost kernel[0]: FireWire (OHCI) VendorID 1180 ID 552 PCI now active, GUID 364fc000325b00e1; max speed s400.
Sep 7 13:53:44 localhost kernel[0]: AppleIntelICHxSATA: ICH6-M SATA (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0xbfa0)
Sep 7 13:53:44 localhost kernel[0]: in6_ifattach_loopback: failed to configure the loopback address on lo0 (errno=55)
Sep 7 13:53:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntelPIIXATARoot/PRI@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080AH Media/IOFDiskPartitionScheme/Untitled 2@2
Sep 7 13:53:44 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Sep 7 13:53:44 localhost kernel[0]: Jettisoning kernel linker.
Sep 7 13:53:44 localhost kernel[0]: Resetting IOCatalogue.
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 3
Sep 7 13:53:38 localhost memberd[59]: memberd starting up
Sep 7 13:53:38 localhost mDNSResponder-108 (Dec 25 2005 11: 57:53)[51]: starting
Sep 7 13:53:44 localhost DirectoryService[71]: Launched version 2.1 (v353.2)
Sep 7 13:53:44 localhost lookupd[58]: lookupd (version 369.5) starting - Thu Sep 7 13:53:44 2006
Sep 7 13:53:45 localhost kernel[0]: AppleBCM440XEthernet: Ethernet address 00:11:43:73:a4:ea
Sep 7 13:53:45 localhost launchd: Server 2d07 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[58]: exited abnormally: Hangup
Sep 7 13:53:47 localhost kernel[0]: VID: vram [d0000000:08000000]
Sep 7 13:53:47 localhost diskarbitrationd[57]: disk0s2 hfs 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29 MAC OSX /
Sep 7 13:53:47 localhost kernel[0]: bfe0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Sep 7 13:53:47 localhost lookupd[86]: lookupd (version 369.5) starting - Thu Sep 7 13:53:47 2006
Sep 7 13:53:47 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Sep 7 13:53:48 localhost diskarbitrationd[57]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled
Sep 7 13:53:48 localhost loginwindow[87]: Login Window Started Security Agent
Sep 7 13:53:50 localhost mDNSResponder: Adding browse domain local.
Sep 7 13:53:53 localhost kernel[0]: bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
Sep 7 13:53:53 localhost configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 13:53:53 localhost kernel[0]: bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
Sep 7 13:53:53 kaer-filatems-computer configd[55]: setting hostname to "kaer-filatems-computer.local"
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:59 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:07 kaer-filatems-computer configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 13:53:07 kaer-filatems-computer kernel[0]: (76: coreservicesd)tfp: failed on 0:
Sep 7 13:53:08 kaer-filatems-computer shutdown: reboot by kaerfilatem:
Sep 7 13:53:08 kaer-filatems-computer kernel[0]: (215: ps)tfp: failed on 0:
Sep 7 13:53:08 kaer-filatems-computer SystemStarter[206]: authentication service (219) did not complete successfully
Sep 7 13:53:08 kaer-filatems-computer kernel[0]: (215: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (247: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (247: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (248: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (248: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (249: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (249: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (250: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (250: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (251: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (251: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (252: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (252: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (253: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (253: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (254: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (254: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (255: ps)tfp: failed on 0:
Sep 7 13:53:10 kaer-filatems-computer kernel[0]: (255: ps)tfp: failed on 0:
Sep 7 13:53:44 localhost kernel[0]: hi mem tramps at 0xffe00000
Sep 7 13:53:44 localhost kernel[0]: PAE enabled
Sep 7 13:53:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 7 13:53:44 localhost kernel[0]: vm_page_bootstrap: 514641 free pages
Sep 7 13:53:44 localhost kernel[0]: mig_table_max_displ = 71
Sep 7 13:53:44 localhost kernel[0]: CPU identification: Intel(R) Pentium(R) M processor 1.73GHz
Sep 7 13:53:44 localhost kernel[0]: CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST
Sep 7 13:53:44 localhost kernel[0]: CPU extended features: XD
Sep 7 13:53:44 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Sep 7 13:53:44 localhost kernel[0]: [RTCLOCK] frequency 1730000000 (1729081220)
Sep 7 13:53:44 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Sep 7 13:53:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Sep 7 13:53:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Disabled
Sep 7 13:53:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 7 13:53:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 7 13:53:44 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Sep 7 13:53:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Sep 7 13:53:44 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Sep 7 13:53:44 localhost kernel[0]: Security auditing service present
Sep 7 13:53:44 localhost kernel[0]: BSM auditing present
Sep 7 13:53:44 localhost kernel[0]: disabled
Sep 7 13:53:44 localhost kernel[0]: From path: "uuid",
Sep 7 13:53:44 localhost kernel[0]: Waiting for boot volume with UUID 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29
Sep 7 13:53:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Sep 7 13:53:44 localhost kernel[0]: IOPCCardBridge::start failed
Sep 7 13:53:44 localhost kernel[0]: USB caused wake event (EHCI)
Sep 7 13:53:44 localhost kernel[0]: AppleIntelPIIXPATA: ICH6-M SATA (CMD 0x170, CTR 0x374, IRQ 15, BM 0xbfa8)
Sep 7 13:53:44 localhost kernel[0]: FireWire (OHCI) VendorID 1180 ID 552 PCI now active, GUID 364fc000325b00e1; max speed s400.
Sep 7 13:53:44 localhost kernel[0]: AppleIntelICHxSATA: ICH6-M SATA (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0xbfa0)
Sep 7 13:53:44 localhost kernel[0]: in6_ifattach_loopback: failed to configure the loopback address on lo0 (errno=55)
Sep 7 13:53:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntelPIIXATARoot/PRI@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080AH Media/IOFDiskPartitionScheme/Untitled 2@2
Sep 7 13:53:44 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Sep 7 13:53:44 localhost kernel[0]: Jettisoning kernel linker.
Sep 7 13:53:44 localhost kernel[0]: Resetting IOCatalogue.
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 1
Sep 7 13:53:44 localhost kernel[0]: Matching service count = 3
Sep 7 13:53:38 localhost memberd[59]: memberd starting up
Sep 7 13:53:38 localhost mDNSResponder-108 (Dec 25 2005 11: 57:53)[51]: starting
Sep 7 13:53:44 localhost DirectoryService[71]: Launched version 2.1 (v353.2)
Sep 7 13:53:44 localhost lookupd[58]: lookupd (version 369.5) starting - Thu Sep 7 13:53:44 2006
Sep 7 13:53:45 localhost kernel[0]: AppleBCM440XEthernet: Ethernet address 00:11:43:73:a4:ea
Sep 7 13:53:45 localhost launchd: Server 2d07 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[58]: exited abnormally: Hangup
Sep 7 13:53:47 localhost kernel[0]: VID: vram [d0000000:08000000]
Sep 7 13:53:47 localhost diskarbitrationd[57]: disk0s2 hfs 7D725F10-3FF1-3AB1-9B8F-284D0D5C0B29 MAC OSX /
Sep 7 13:53:47 localhost kernel[0]: bfe0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Sep 7 13:53:47 localhost lookupd[86]: lookupd (version 369.5) starting - Thu Sep 7 13:53:47 2006
Sep 7 13:53:47 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Sep 7 13:53:48 localhost diskarbitrationd[57]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled
Sep 7 13:53:48 localhost loginwindow[87]: Login Window Started Security Agent
Sep 7 13:53:50 localhost mDNSResponder: Adding browse domain local.
Sep 7 13:53:53 localhost kernel[0]: bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
Sep 7 13:53:53 localhost configd[55]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Sep 7 13:53:53 localhost kernel[0]: bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
Sep 7 13:53:53 kaer-filatems-computer configd[55]: setting hostname to "kaer-filatems-computer.local"
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:58 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Sep 7 13:53:59 kaer-filatems-computer kernel[0]: (64: SystemStarter)tfp: failed on 0:
Hopefully this will help.
any updates on the RTL 8168/8111?
i found a post somewhere about using a ViaRhine kext for 8111 but it didnt work
i found a post somewhere about using a ViaRhine kext for 8111 but it didnt work
QUOTE(Serotonin @ Oct 5 2005, 06:39 PM)
Works:
BELKIN F5D7001UK
Didn't Work :
Belkin USB to Ethernet Adapter
Linksys WUSB12
Netgear GA311 Gigabit Ethernet
RealTek Combo Full Duplex ISA £15.95 from Matmos (www.matmos.co.uk) didn't fit in mb.
BELKIN F5D7001UK
Didn't Work :
Belkin USB to Ethernet Adapter
Linksys WUSB12
Netgear GA311 Gigabit Ethernet
RealTek Combo Full Duplex ISA £15.95 from Matmos (www.matmos.co.uk) didn't fit in mb.
hey!! is the BELKIN F5D7001UK really work?
how do you fix it..any references?where drivers can i download?
BTW my osx 10.4.7..and running on compaq hpnx5000
great if can help me to resolve this problem..
My
Realtek RTL81168/8111 PCI-E
onboardo 945PL
does not work
Realtek RTL81168/8111 PCI-E
onboardo 945PL
does not work
i bought belkin 7050 v2 today it's running i connect internet with it's,
do happy
driver name
USB_Wireless_Installer.dmg
my os 10.4.6 update to 10.4.7
successfully
do happy
driver name
USB_Wireless_Installer.dmg
my os 10.4.6 update to 10.4.7
successfully
Does anyone know how to get my realtek 8139/810 family fast ethernet port thats integrated onto my motherboard working??
Help is greatly appreciated
Help is greatly appreciated
or My linsys tne 100tx (v5) working
When i use tuplip,after i had my realtek 8139 dev and ven ids
and exit the info.plist and save
the guide tells me to 'Save the file(Ctrl-X and select yes) then do a cd .. cd .."
and then it tells me to enter(kextload tulip.kext)
after i enter that it says cannot find file or someting like that
can anyone plz help
Thank you
When i use tuplip,after i had my realtek 8139 dev and ven ids
and exit the info.plist and save
the guide tells me to 'Save the file(Ctrl-X and select yes) then do a cd .. cd .."
and then it tells me to enter(kextload tulip.kext)
after i enter that it says cannot find file or someting like that
can anyone plz help
Thank you
Is there a way for 3Com940 on Asus P4C800 to work on 10.4.6? Are the additional drivers.
HI,
Well, good news is I've just got 10.4.7 installed on my PC with an Intel Pro 1000 Desktop adapter. It works fine straight off.
)
After installing on 2 other Dell laptops (both with broadcom 57xx NICs) and neither of them working - everything except networking anyway - Now I've put it on my PC and am v happy ;p
I found I couldn't install it to a partition unless it's the first on the disk - I found this with the laptops too. I just imaged (Ghost) my C: Windows partition earlier, so am putting that back on the second partition. This can cause problems, but they can be fixed with a couple of registry edits. Initially after doing this on one of the laptops, Windows wasnt happy with the partition location changing, so when I logged in it just logged straight back off again. Sorted it out with a regedit fix from Microsoft.com.
The networking thing was the one thing killing me with the laptops...a desktop jsut isn't complete without ANY networking! Now the PC's working I'll be putting it to FULL use)
Yay!
Well, good news is I've just got 10.4.7 installed on my PC with an Intel Pro 1000 Desktop adapter. It works fine straight off.
)After installing on 2 other Dell laptops (both with broadcom 57xx NICs) and neither of them working - everything except networking anyway - Now I've put it on my PC and am v happy ;p
I found I couldn't install it to a partition unless it's the first on the disk - I found this with the laptops too. I just imaged (Ghost) my C: Windows partition earlier, so am putting that back on the second partition. This can cause problems, but they can be fixed with a couple of registry edits. Initially after doing this on one of the laptops, Windows wasnt happy with the partition location changing, so when I logged in it just logged straight back off again. Sorted it out with a regedit fix from Microsoft.com.
The networking thing was the one thing killing me with the laptops...a desktop jsut isn't complete without ANY networking! Now the PC's working I'll be putting it to FULL use
)Yay!
QUOTE(matulike @ Sep 24 2006, 05:16 AM)
Well, good news is I've just got 10.4.7 installed on my PC with an Intel Pro 1000 Desktop adapter. It works fine straight off. )
Can you please tell us the exact name of the Intel Pro 1000 Adapter - there are many different ones. For my Toshiba Laptop they used the Intel Pro 1000 PL one, which I have not been able to get to work. How does windows display that adapter of yours? )Thanks,
Bugs.
helle guys, I've searched all through this forum and I can't find an answer for my prob.
I got an Asus W5F with 945GM, I installed 10.4.6 from Jas and updated to 10.4.7.
My Ethernet wich is a Realtek RTL 8139/810x Family Fast Ethernet NIC wich used to work native from the OSX installation for the last two days is now disconnecting now and then for no reason (the sole modification was the installation of Stuff It Deluxe wich I uninstalled for no result).
The only way to get the net work is to reset/unplug the DSL modem and restart my lappy!!!
Can anyone could help a complete newbie pls
helle guys, I've searched all through this forum and I can't find an answer for my prob.
I got an Asus W5F with 945GM, I installed 10.4.6 from Jas and updated to 10.4.7.
My Ethernet wich is a Realtek RTL 8139/810x Family Fast Ethernet NIC wich used to work native from the OSX installation for the last two days is now disconnecting now and then for no reason (the sole modification was the installation of Stuff It Deluxe wich I uninstalled for no result).
The only way to get the net work is to reset/unplug the DSL modem and restart my lappy!!!
Can anyone could help a complete newbie pls
I got an Asus W5F with 945GM, I installed 10.4.6 from Jas and updated to 10.4.7.
My Ethernet wich is a Realtek RTL 8139/810x Family Fast Ethernet NIC wich used to work native from the OSX installation for the last two days is now disconnecting now and then for no reason (the sole modification was the installation of Stuff It Deluxe wich I uninstalled for no result).
The only way to get the net work is to reset/unplug the DSL modem and restart my lappy!!!
Can anyone could help a complete newbie pls
helle guys, I've searched all through this forum and I can't find an answer for my prob.
I got an Asus W5F with 945GM, I installed 10.4.6 from Jas and updated to 10.4.7.
My Ethernet wich is a Realtek RTL 8139/810x Family Fast Ethernet NIC wich used to work native from the OSX installation for the last two days is now disconnecting now and then for no reason (the sole modification was the installation of Stuff It Deluxe wich I uninstalled for no result).
The only way to get the net work is to reset/unplug the DSL modem and restart my lappy!!!
Can anyone could help a complete newbie pls
To RTL8168/8111 owners: please visit this topic http://forum.insanelymac.com/index.php?showtopic=29436
D-link DWL-G122 USB dongle doesn't work for me. OS X 10.4.5
No problem with this one:
3Com 3C905B-TX
3Com 3C905B-TX
QUOTE(MegaSo @ Aug 30 2006, 02:51 PM)
Hi to all!
please help me! Does anyone know to make Broadcom 440x working in Jas Mac OS 10.4.6 or 10.4.7?
i tied so many times to solve this problem using diferent solution but failed
Please give a link or ful tultorial how to make it working!!!!
Thank you!!!
please help me! Does anyone know to make Broadcom 440x working in Jas Mac OS 10.4.6 or 10.4.7?
i tied so many times to solve this problem using diferent solution but failed
Please give a link or ful tultorial how to make it working!!!!
Thank you!!!
what a pity! I have the same problem. Wishes to us
Marvel Yukon 88E8053 works fine without changing anything on Mac Os X 10.4.7
Broadcom 440X card works when I boot PC derect to Mac OSX.
Of course change the drivers and "eno" to "en1".
It could connect to the router but not to the Internet! Strange
Of course change the drivers and "eno" to "en1".
It could connect to the router but not to the Internet! Strange
ECS 848P-A7 board's onboard LAN is supported by OSX86, and shows up as "Built in Ethernet"
My Linksys Wireless G PCI card #WMP54GS worked right out of the box on my Hackintosh. Jas 10.4.8 installed on a P4 2.8 with SSE2 and 1 Gig ram.
Wireless D-Link DWL-G520 AirPlusXtremeG works on my Jas 10.4.8 amd sse3. I did not install the hacked wireless driver on the Jas 10.4.7 full installer
I have d-link DFE-538TX which is supposed to work natively but I can't seems to get it to work in Jas 10.4.8. Anyone can help?
QUOTE(abubin @ Nov 10 2006, 11:16 AM)
I have d-link DFE-538TX which is supposed to work natively but I can't seems to get it to work in Jas 10.4.8. Anyone can help?
My realtek 8139 should work too with the 10.4.7 IONetworkingFamily.kext but I couldn't get it working. So yesterday I've bought myself an cheap ass linksys LNE100TX for E 13,- and it works great with the tulip driver
No success for now
tried:
3 COM 905B (worked with 10.4.3)
Realtek RTL 8139 B
NO BRAND RTL 8139 B Chipset
ATI 2450FT
ATI 2450FTX
ATI 2701
onboard RTL 8201CL
but none of them works for me.
Can so. please send me the 10.4.6. or 10.4.7 IOPCI.kext and IONetworking.kext for some further tests ???
tried:
3 COM 905B (worked with 10.4.3)
Realtek RTL 8139 B
NO BRAND RTL 8139 B Chipset
ATI 2450FT
ATI 2450FTX
ATI 2701
onboard RTL 8201CL
but none of them works for me.
Can so. please send me the 10.4.6. or 10.4.7 IOPCI.kext and IONetworking.kext for some further tests ???
Realtek 8139 i belive works great for me
QUOTE(DJ Bang! @ Oct 31 2006, 08:10 PM)
My Linksys Wireless G PCI card #WMP54GS worked right out of the box on my Hackintosh. Jas 10.4.8 installed on a P4 2.8 with SSE2 and 1 Gig ram.
i have the same card v.4.1(RT61chip) .. but it does not work..
what version or what chip is it?
how did you do that????
What we really need is a driver for Intel Wireless Pro 2200bg...sorry 
is there a way to convert it or renaming it...like using File Maker 8.5 or renaming to .dmg or somthing like that?
I think the best way is still doing something with the driver for Linux...but...uhm...well you know
is there a way to convert it or renaming it...like using File Maker 8.5 or renaming to .dmg or somthing like that?
I think the best way is still doing something with the driver for Linux...but...uhm...well you know
ViaRhineII6102 Doesn't work Asus P5V800-MX
pinxue driver no set Mac 00:00:00:00:00:00
pinxue driver no set Mac 00:00:00:00:00:00
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.