After doing a native install I thought that you all might like to see some Xbench scores.
Test System:
Dell Optiplex Gx280
Intel 915 chipset - Integrated GMA 900 graphics
1GB RAM
SATA HDD
Installed Os X using the dev dvd with only Rosetta patched
Xbench 1.2 Universal
Results 35.77
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ADP2,1
Drive Type ST380013AS
CPU Test 18.92
GCD Loop 91.05 4.80 Mops/sec
Floating Point Basic 71.15 1.69 Gflop/sec
vecLib FFT 5.80 191.49 Mflop/sec
Floating Point Library 70.92 12.35 Mops/sec
Thread Test 94.91
Computation 82.44 1.67 Mops/sec, 4 threads
Lock Contention 111.83 4.81 Mlocks/sec, 4 threads
Memory Test 76.98
System 61.90
Allocate 89.88 330.09 Kalloc/sec
Fill 70.83 3443.73 MB/sec
Copy 43.06 889.48 MB/sec
Stream 101.77
Copy 98.31 2030.46 MB/sec
Scale 99.68 2059.34 MB/sec
Add 105.43 2245.82 MB/sec
Triad 104.00 2224.92 MB/sec
Quartz Graphics Test 49.10
Line 48.23 3.21 Klines/sec [50% alpha]
Rectangle 40.69 12.15 Krects/sec [50% alpha]
Circle 39.05 3.18 Kcircles/sec [50% alpha]
Bezier 73.17 1.85 Kbeziers/sec [50% alpha]
Text 57.99 3.63 Kchars/sec
OpenGL Graphics Test 196.12
Spinning Squares 196.12 248.79 frames/sec
User Interface Test 13.77
Elements 13.77 63.19 refresh/sec
Disk Test 47.08
Sequential 77.60
Uncached Write 98.16 60.27 MB/sec [4K blocks]
Uncached Write 95.30 53.92 MB/sec [256K blocks]
Uncached Read 46.59 13.64 MB/sec [4K blocks]
Uncached Read 106.36 53.46 MB/sec [256K blocks]
Random 33.79
Uncached Write 11.71 1.24 MB/sec [4K blocks]
Uncached Write 73.75 23.61 MB/sec [256K blocks]
Uncached Read 87.76 0.62 MB/sec [4K blocks]
Uncached Read 124.87 23.17 MB/sec [256K blocks]
Xbench under Rosetta on the same setup
Results 16.48
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ADP2,1
Drive Type ST380013AS
CPU Test 8.42
GCD Loop 80.64 4.25 Mops/sec
Floating Point Basic 11.17 265.51 Mflop/sec
vecLib FFT 2.95 97.30 Mflop/sec
Floating Point Library 29.14 5.07 Mops/sec
Thread Test 25.88
Computation 63.23 1.28 Mops/sec, 4 threads
Lock Contention 16.27 700.03 Klocks/sec, 4 threads
Memory Test 34.58
System 21.42
Allocate 10.90 40.04 Kalloc/sec
Fill 42.51 2066.94 MB/sec
Copy 40.28 832.03 MB/sec
Stream 89.74
Copy 96.03 1983.50 MB/sec
Scale 74.86 1546.50 MB/sec
Add 97.57 2078.38 MB/sec
Triad 94.75 2027.03 MB/sec
Quartz Graphics Test 30.34
Line 40.28 2.68 Klines/sec [50% alpha]
Rectangle 26.76 7.99 Krects/sec [50% alpha]
Circle 27.76 2.26 Kcircles/sec [50% alpha]
Bezier 52.93 1.33 Kbeziers/sec [50% alpha]
Text 20.97 1.31 Kchars/sec
OpenGL Graphics Test 146.31
Spinning Squares 146.31 185.60 frames/sec
User Interface Test 5.64
Elements 5.64 25.89 refresh/sec
Disk Test 47.08
Sequential 73.28
Uncached Write 101.59 62.38 MB/sec [4K blocks]
Uncached Write 94.87 53.68 MB/sec [256K blocks]
Uncached Read 40.33 11.80 MB/sec [4K blocks]
Uncached Read 106.29 53.42 MB/sec [256K blocks]
Random 34.68
Uncached Write 12.17 1.29 MB/sec [4K blocks]
Uncached Write 72.79 23.30 MB/sec [256K blocks]
Uncached Read 87.38 0.62 MB/sec [4K blocks]
Uncached Read 125.32 23.25 MB/sec [256K blocks]
The scores aren't that high but they can be directly attributed to the lack of Altivec.
Full Version: Xbench scores (Intel native vs Rosetta)
So this was on a Pentium P4 530, 3.0 GHz, 800 MHz FSB, 1 MB cache? http://www.3dvelocity.com/reviews/dellgx280/gx280.htm
So Xbench has been released as a Univerisal binary? How convenient.
Yes, the overall Xbench composite result should perhaps be totally ignored here and individual test results considered when fairly applicable to both x86 and PPC.
For what it is worth, and frankly that should not be much, here are the results I just got on my PowerMac G5 for comparison:
Results 95.96
System Info
Xbench Version 1.2
System Version 10.4.2 (8C46)
Physical RAM 3072 MB
Model PowerMac7,3
Processor PowerPC G5x2 @ 2.00 GHz
L1 Cache 64K (instruction), 32K (data)
L2 Cache 512K @ 2.00 GHz
Bus Frequency 1 GHz
Video Card ATY,RV360
Drive Type Maxtor 6Y250M0
CPU Test 100.73
GCD Loop 100.07 5.28 Mops/sec
Floating Point Basic 100.43 2.39 Gflop/sec
vecLib FFT 105.27 3.47 Gflop/sec
Floating Point Library 97.47 16.97 Mops/sec
Thread Test 101.41
Computation 102.47 2.08 Mops/sec, 4 threads
Lock Contention 100.37 4.32 Mlocks/sec, 4 threads
Memory Test 99.43
System 94.43
Allocate 105.29 386.65 Kalloc/sec
Fill 103.80 5046.93 MB/sec
Copy 79.13 1634.40 MB/sec
Stream 104.99
Copy 104.67 2161.87 MB/sec [G5]
Scale 104.64 2161.87 MB/sec [G5]
Add 105.59 2249.28 MB/sec [G5]
Triad 105.05 2247.30 MB/sec [G5]
Quartz Graphics Test 103.25
Line 97.44 6.49 Klines/sec [50% alpha]
Rectangle 96.83 28.91 Krects/sec [50% alpha]
Circle 97.52 7.95 Kcircles/sec [50% alpha]
Bezier 98.23 2.48 Kbeziers/sec [50% alpha]
Text 135.12 8.45 Kchars/sec
OpenGL Graphics Test 123.54
Spinning Squares 123.54 156.72 frames/sec
User Interface Test 86.11
Elements 86.11 395.21 refresh/sec
Disk Test 72.95
Sequential 105.70
Uncached Write 118.52 72.77 MB/sec [4K blocks]
Uncached Write 105.95 59.94 MB/sec [256K blocks]
Uncached Read 90.50 26.49 MB/sec [4K blocks]
Uncached Read 112.16 56.37 MB/sec [256K blocks]
Random 55.69
Uncached Write 21.44 2.27 MB/sec [4K blocks]
Uncached Write 137.31 43.96 MB/sec [256K blocks]
Uncached Read 93.63 0.66 MB/sec [4K blocks]
Uncached Read 138.51 25.70 MB/sec [256K blocks]
So Xbench has been released as a Univerisal binary? How convenient.
QUOTE
The scores aren't that high but they can be directly attributed to the lack of Altivec.
Yes, the overall Xbench composite result should perhaps be totally ignored here and individual test results considered when fairly applicable to both x86 and PPC.
For what it is worth, and frankly that should not be much, here are the results I just got on my PowerMac G5 for comparison:
Results 95.96
System Info
Xbench Version 1.2
System Version 10.4.2 (8C46)
Physical RAM 3072 MB
Model PowerMac7,3
Processor PowerPC G5x2 @ 2.00 GHz
L1 Cache 64K (instruction), 32K (data)
L2 Cache 512K @ 2.00 GHz
Bus Frequency 1 GHz
Video Card ATY,RV360
Drive Type Maxtor 6Y250M0
CPU Test 100.73
GCD Loop 100.07 5.28 Mops/sec
Floating Point Basic 100.43 2.39 Gflop/sec
vecLib FFT 105.27 3.47 Gflop/sec
Floating Point Library 97.47 16.97 Mops/sec
Thread Test 101.41
Computation 102.47 2.08 Mops/sec, 4 threads
Lock Contention 100.37 4.32 Mlocks/sec, 4 threads
Memory Test 99.43
System 94.43
Allocate 105.29 386.65 Kalloc/sec
Fill 103.80 5046.93 MB/sec
Copy 79.13 1634.40 MB/sec
Stream 104.99
Copy 104.67 2161.87 MB/sec [G5]
Scale 104.64 2161.87 MB/sec [G5]
Add 105.59 2249.28 MB/sec [G5]
Triad 105.05 2247.30 MB/sec [G5]
Quartz Graphics Test 103.25
Line 97.44 6.49 Klines/sec [50% alpha]
Rectangle 96.83 28.91 Krects/sec [50% alpha]
Circle 97.52 7.95 Kcircles/sec [50% alpha]
Bezier 98.23 2.48 Kbeziers/sec [50% alpha]
Text 135.12 8.45 Kchars/sec
OpenGL Graphics Test 123.54
Spinning Squares 123.54 156.72 frames/sec
User Interface Test 86.11
Elements 86.11 395.21 refresh/sec
Disk Test 72.95
Sequential 105.70
Uncached Write 118.52 72.77 MB/sec [4K blocks]
Uncached Write 105.95 59.94 MB/sec [256K blocks]
Uncached Read 90.50 26.49 MB/sec [4K blocks]
Uncached Read 112.16 56.37 MB/sec [256K blocks]
Random 55.69
Uncached Write 21.44 2.27 MB/sec [4K blocks]
Uncached Write 137.31 43.96 MB/sec [256K blocks]
Uncached Read 93.63 0.66 MB/sec [4K blocks]
Uncached Read 138.51 25.70 MB/sec [256K blocks]
This was with a 3.2Ghz P4
Xbench 1.2 is now available as a Universal Binary as of 7/30/05 - http://www.xbench.com/
Same system that you have linked to.
The 100 point scale with Xbench 1.2 has been re-calibrated to the dual 2.0 G5 that was just listed.
Xbench 1.2 is now available as a Universal Binary as of 7/30/05 - http://www.xbench.com/
Same system that you have linked to.
The 100 point scale with Xbench 1.2 has been re-calibrated to the dual 2.0 G5 that was just listed.
On an 3 GHz HP xw4100...
Results 42.31
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 512 MB
Model ADP2,1
Drive Type ST380013AS
CPU Test 18.07
GCD Loop 61.53 3.24 Mops/sec
Floating Point Basic 68.70 1.63 Gflop/sec
vecLib FFT 5.68 187.26 Mflop/sec
Floating Point Library 69.72 12.14 Mops/sec
Thread Test 74.62
Computation 66.52 1.35 Mops/sec, 4 threads
Lock Contention 84.95 3.65 Mlocks/sec, 4 threads
Memory Test 92.50
System 71.29
Allocate 108.95 400.09 Kalloc/sec
Fill 66.64 3240.19 MB/sec
Copy 55.88 1154.16 MB/sec
Stream 131.68
Copy 126.12 2605.01 MB/sec
Scale 126.10 2605.21 MB/sec
Add 138.72 2955.12 MB/sec
Triad 136.82 2926.98 MB/sec
Quartz Graphics Test 53.32
Line 44.94 2.99 Klines/sec [50% alpha]
Rectangle 46.06 13.75 Krects/sec [50% alpha]
Circle 46.02 3.75 Kcircles/sec [50% alpha]
Bezier 82.70 2.09 Kbeziers/sec [50% alpha]
Text 62.56 3.91 Kchars/sec
OpenGL Graphics Test 41.67
Spinning Squares 41.67 52.86 frames/sec
User Interface Test 42.68
Elements 42.68 195.86 refresh/sec
Disk Test 50.66
Sequential 95.32
Uncached Write 106.33 65.28 MB/sec [4K blocks]
Uncached Write 79.62 45.05 MB/sec [256K blocks]
Uncached Read 93.51 27.37 MB/sec [4K blocks]
Uncached Read 107.45 54.00 MB/sec [256K blocks]
Random 34.50
Uncached Write 11.92 1.26 MB/sec [4K blocks]
Uncached Write 71.75 22.97 MB/sec [256K blocks]
Uncached Read 93.45 0.66 MB/sec [4K blocks]
Uncached Read 134.86 25.02 MB/sec [256K blocks]
Results 42.31
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 512 MB
Model ADP2,1
Drive Type ST380013AS
CPU Test 18.07
GCD Loop 61.53 3.24 Mops/sec
Floating Point Basic 68.70 1.63 Gflop/sec
vecLib FFT 5.68 187.26 Mflop/sec
Floating Point Library 69.72 12.14 Mops/sec
Thread Test 74.62
Computation 66.52 1.35 Mops/sec, 4 threads
Lock Contention 84.95 3.65 Mlocks/sec, 4 threads
Memory Test 92.50
System 71.29
Allocate 108.95 400.09 Kalloc/sec
Fill 66.64 3240.19 MB/sec
Copy 55.88 1154.16 MB/sec
Stream 131.68
Copy 126.12 2605.01 MB/sec
Scale 126.10 2605.21 MB/sec
Add 138.72 2955.12 MB/sec
Triad 136.82 2926.98 MB/sec
Quartz Graphics Test 53.32
Line 44.94 2.99 Klines/sec [50% alpha]
Rectangle 46.06 13.75 Krects/sec [50% alpha]
Circle 46.02 3.75 Kcircles/sec [50% alpha]
Bezier 82.70 2.09 Kbeziers/sec [50% alpha]
Text 62.56 3.91 Kchars/sec
OpenGL Graphics Test 41.67
Spinning Squares 41.67 52.86 frames/sec
User Interface Test 42.68
Elements 42.68 195.86 refresh/sec
Disk Test 50.66
Sequential 95.32
Uncached Write 106.33 65.28 MB/sec [4K blocks]
Uncached Write 79.62 45.05 MB/sec [256K blocks]
Uncached Read 93.51 27.37 MB/sec [4K blocks]
Uncached Read 107.45 54.00 MB/sec [256K blocks]
Random 34.50
Uncached Write 11.92 1.26 MB/sec [4K blocks]
Uncached Write 71.75 22.97 MB/sec [256K blocks]
Uncached Read 93.45 0.66 MB/sec [4K blocks]
Uncached Read 134.86 25.02 MB/sec [256K blocks]
XBench on a Celeron with VIA Chipset MoBo:
OS X needs a lot a RAM to run well, you may see significant performance gain by boosting your RAM to 1 GB or more: http://www.concretesurf.co.nz/osx86/viewtopic.php?t=204
QUOTE("ThinkSecret")
Intel Mac Benchmarks
Individuals attending Apple's Worldwide Developer Conference have submitted Xbench benchmark results from Apple's Pentium 4-based Power Mac systems. The benchmarks do not reflect native performance of the 3.6GHz systems, however, but rather provide an indication of how PowerPC-compiled applications will run under Rosetta on Intel-based systems.
Rosetta is the name of Apple's technology that seamlessly converts PowerPC code to Intel code on the fly. It is designed so that applications that are not available as universal binaries for both PowerPC and Intel systems can still run on Apple's Intel Macs. During the WWDC keynote, Apple CEO Steve Jobs demonstrated several PowerPC applications running with Rosetta, including Microsoft Office and Adobe Photoshop. Very fast systems, Jobs said, will be able to take advantage of Rosetta without the user even noticing.
Preliminary benchmarks suggest otherwise, but questions still remain about benchmarking Rosetta. One developer wonders how the Intel Mac would score when running Xbench a second time, since Rosetta caches translated binaries in real time, and could presumably benefit from the cache upon an additional run. In addition, Apple's developer docs say Rosetta isn't tuned to apps that have "intense" computing needs, though it says software with moderate user interaction and "some high computational needs" are in most cases compatible.
Overall, the Intel Mac are scoring between 65 and 70 with Xbench, a far cry from the 200+ scores higher-end G5 systems reach. The CPU test is landing in the high teens compared with scores of 100 to 200 for G5 systems, but that appears to be primarily due to lackluster FPU scores. According to a recent Macworld story, Rosetta does not support AltiVec instructions, which substanties the results. The GCD Loop score for the Intel Mac, part of the CPU test, is a respectable 110, compared to dual-2.5GHz G5 Macs that score about 140.
The Intel Mac performed substantially less well than the dual-2.5GHz G5 at Thread test, scoring an 82 compared to 225. In the Computation Thread test the Intel Mac scored a respectable 110 compared to 155 in the G5, but the G5 blew the doors of the Intel Mac in the Lock Contention test, scoring a 420 to the Intel Mac's 66.
The Memory Test tells a similar story: overall the Intel Mac scored a 214 to the G5's 378, but the Intel Mac actually exceeded the G5's Stream Memory Test: 351 to 319. The G5 trounces the Intel Mac at the system memory test, however, scoring a 464 while the Intel Mac musters a 154.
The Intel Mac scored a 125 on the Interface Test, compared to a 380 for the G5.
The Intel Mac scored well in both the Quartz graphics and OpenGL graphics tests—almost matching or exceeding dual-2.5GHz G5 score—although it's unknown which video card is powering the system. There has been some speculation that Apple's emracement of Intel processors will also allow the company to take advantage of off-the-shelf PC video cards. In addition, Mac Rumors notes that "system tools calls/APIs should enjoy native (not emulated) speeds."
The Intel Macs are running Mac OS X 10.4.1 8B1025.
Individuals attending Apple's Worldwide Developer Conference have submitted Xbench benchmark results from Apple's Pentium 4-based Power Mac systems. The benchmarks do not reflect native performance of the 3.6GHz systems, however, but rather provide an indication of how PowerPC-compiled applications will run under Rosetta on Intel-based systems.
Rosetta is the name of Apple's technology that seamlessly converts PowerPC code to Intel code on the fly. It is designed so that applications that are not available as universal binaries for both PowerPC and Intel systems can still run on Apple's Intel Macs. During the WWDC keynote, Apple CEO Steve Jobs demonstrated several PowerPC applications running with Rosetta, including Microsoft Office and Adobe Photoshop. Very fast systems, Jobs said, will be able to take advantage of Rosetta without the user even noticing.
Preliminary benchmarks suggest otherwise, but questions still remain about benchmarking Rosetta. One developer wonders how the Intel Mac would score when running Xbench a second time, since Rosetta caches translated binaries in real time, and could presumably benefit from the cache upon an additional run. In addition, Apple's developer docs say Rosetta isn't tuned to apps that have "intense" computing needs, though it says software with moderate user interaction and "some high computational needs" are in most cases compatible.
Overall, the Intel Mac are scoring between 65 and 70 with Xbench, a far cry from the 200+ scores higher-end G5 systems reach. The CPU test is landing in the high teens compared with scores of 100 to 200 for G5 systems, but that appears to be primarily due to lackluster FPU scores. According to a recent Macworld story, Rosetta does not support AltiVec instructions, which substanties the results. The GCD Loop score for the Intel Mac, part of the CPU test, is a respectable 110, compared to dual-2.5GHz G5 Macs that score about 140.
The Intel Mac performed substantially less well than the dual-2.5GHz G5 at Thread test, scoring an 82 compared to 225. In the Computation Thread test the Intel Mac scored a respectable 110 compared to 155 in the G5, but the G5 blew the doors of the Intel Mac in the Lock Contention test, scoring a 420 to the Intel Mac's 66.
The Memory Test tells a similar story: overall the Intel Mac scored a 214 to the G5's 378, but the Intel Mac actually exceeded the G5's Stream Memory Test: 351 to 319. The G5 trounces the Intel Mac at the system memory test, however, scoring a 464 while the Intel Mac musters a 154.
The Intel Mac scored a 125 on the Interface Test, compared to a 380 for the G5.
The Intel Mac scored well in both the Quartz graphics and OpenGL graphics tests—almost matching or exceeding dual-2.5GHz G5 score—although it's unknown which video card is powering the system. There has been some speculation that Apple's emracement of Intel processors will also allow the company to take advantage of off-the-shelf PC video cards. In addition, Mac Rumors notes that "system tools calls/APIs should enjoy native (not emulated) speeds."
The Intel Macs are running Mac OS X 10.4.1 8B1025.
http://www.thinksecret.com/news/0506intelxbench.html
AMD64 3500+ with Safe Boot Option
Results 50.88
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type QUANTUM FIREBALLP AS40.0
CPU Test 30.58
GCD Loop 118.52 6.25 Mops/sec
Floating Point Basic 70.19 1.67 Gflop/sec
vecLib FFT 10.50 346.40 Mflop/sec
Floating Point Library 77.72 13.53 Mops/sec
Thread Test 66.53
Computation 50.87 1.03 Mops/sec, 4 threads
Lock Contention 96.13 4.14 Mlocks/sec, 4 threads
Memory Test 89.01
System 68.23
Allocate 238.60 876.20 Kalloc/sec
Fill 50.74 2467.33 MB/sec
Copy 49.82 1028.93 MB/sec
Stream 128.01
Copy 122.67 2533.65 MB/sec
Scale 116.40 2404.73 MB/sec
Add 138.55 2951.31 MB/sec
Triad 137.26 2936.33 MB/sec
Quartz Graphics Test 76.50
Line 71.13 4.74 Klines/sec [50% alpha]
Rectangle 103.72 30.97 Krects/sec [50% alpha]
Circle 103.52 8.44 Kcircles/sec [50% alpha]
Bezier 112.61 2.84 Kbeziers/sec [50% alpha]
Text 43.26 2.71 Kchars/sec
OpenGL Graphics Test 43.44
Spinning Squares 43.44 55.11 frames/sec
Disk Test 13.16
Sequential 13.70
Uncached Write 10.38 6.37 MB/sec [4K blocks]
Uncached Write 11.52 6.52 MB/sec [256K blocks]
Uncached Read 25.36 7.42 MB/sec [4K blocks]
Uncached Read 14.42 7.25 MB/sec [256K blocks]
Random 12.65
Uncached Write 4.50 0.48 MB/sec [4K blocks]
Uncached Write 20.51 6.56 MB/sec [256K blocks]
Uncached Read 60.85 0.43 MB/sec [4K blocks]
Uncached Read 34.62 6.42 MB/sec [256K blocks]
Results 50.88
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type QUANTUM FIREBALLP AS40.0
CPU Test 30.58
GCD Loop 118.52 6.25 Mops/sec
Floating Point Basic 70.19 1.67 Gflop/sec
vecLib FFT 10.50 346.40 Mflop/sec
Floating Point Library 77.72 13.53 Mops/sec
Thread Test 66.53
Computation 50.87 1.03 Mops/sec, 4 threads
Lock Contention 96.13 4.14 Mlocks/sec, 4 threads
Memory Test 89.01
System 68.23
Allocate 238.60 876.20 Kalloc/sec
Fill 50.74 2467.33 MB/sec
Copy 49.82 1028.93 MB/sec
Stream 128.01
Copy 122.67 2533.65 MB/sec
Scale 116.40 2404.73 MB/sec
Add 138.55 2951.31 MB/sec
Triad 137.26 2936.33 MB/sec
Quartz Graphics Test 76.50
Line 71.13 4.74 Klines/sec [50% alpha]
Rectangle 103.72 30.97 Krects/sec [50% alpha]
Circle 103.52 8.44 Kcircles/sec [50% alpha]
Bezier 112.61 2.84 Kbeziers/sec [50% alpha]
Text 43.26 2.71 Kchars/sec
OpenGL Graphics Test 43.44
Spinning Squares 43.44 55.11 frames/sec
Disk Test 13.16
Sequential 13.70
Uncached Write 10.38 6.37 MB/sec [4K blocks]
Uncached Write 11.52 6.52 MB/sec [256K blocks]
Uncached Read 25.36 7.42 MB/sec [4K blocks]
Uncached Read 14.42 7.25 MB/sec [256K blocks]
Random 12.65
Uncached Write 4.50 0.48 MB/sec [4K blocks]
Uncached Write 20.51 6.56 MB/sec [256K blocks]
Uncached Read 60.85 0.43 MB/sec [4K blocks]
Uncached Read 34.62 6.42 MB/sec [256K blocks]
XBench is native for 1.2 version, so it has nothing to do with Rosetta anymore, it just doesn't accurately measure x86 stuff yet because it's just running PPC designed tests in a way that x86 can understand, which I'm sure doesn't make it look good.
QUOTE(DeathChill @ Aug 12 2005, 08:26 AM)
it just doesn't accurately measure x86 stuff yet because it's just running PPC designed tests in a way that x86 can understand, which I'm sure doesn't make it look good.
That's Rosetta you're describing. xbench 1.2 is compiled natively for x86. It's clear that there are some tests that the G5 is better at, notably veclib FFT (which throws the overall cpu score since the x86 is not capable) and floating point operations (again, expected).
Have a look here for the best posted xbench score.
QUOTE(DeathChill @ Aug 12 2005, 08:26 AM)
XBench is native for 1.2 version, so it has nothing to do with Rosetta anymore...
Perhaps he executed the PPC XBench binary in Rosetta.
1.8 Ghz AMD 3000+ (No SSE3)
Results 36.40
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1536 MB
Model ACPI
Drive Type QUANTUM FIREBALLP AS20.5
CPU Test 29.07
GCD Loop 97.52 5.14 Mops/sec
Floating Point Basic 65.34 1.55 Gflop/sec
vecLib FFT 10.62 350.32 Mflop/sec
Floating Point Library 56.03 9.76 Mops/sec
Thread Test 64.09
Computation 45.93 930.50 Kops/sec, 4 threads
Lock Contention 105.98 4.56 Mlocks/sec, 4 threads
Memory Test 78.29
System 60.62
Allocate 207.52 762.07 Kalloc/sec
Fill 43.65 2122.57 MB/sec
Copy 45.95 949.08 MB/sec
Stream 110.49
Copy 115.45 2384.48 MB/sec
Scale 113.35 2341.76 MB/sec
Add 107.35 2286.68 MB/sec
Triad 106.34 2274.90 MB/sec
Quartz Graphics Test 66.61
Line 52.02 3.46 Klines/sec [50% alpha]
Rectangle 63.90 19.08 Krects/sec [50% alpha]
Circle 64.17 5.23 Kcircles/sec [50% alpha]
Bezier 86.58 2.18 Kbeziers/sec [50% alpha]
Text 76.55 4.79 Kchars/sec
OpenGL Graphics Test 34.03
Spinning Squares 34.03 43.17 frames/sec
User Interface Test 70.27
Elements 70.27 322.51 refresh/sec
Disk Test 14.10
Sequential 13.97
Uncached Write 10.98 6.74 MB/sec [4K blocks]
Uncached Write 11.77 6.66 MB/sec [256K blocks]
Uncached Read 24.62 7.20 MB/sec [4K blocks]
Uncached Read 14.36 7.22 MB/sec [256K blocks]
Random 14.23
Uncached Write 5.27 0.56 MB/sec [4K blocks]
Uncached Write 21.10 6.76 MB/sec [256K blocks]
Uncached Read 69.43 0.49 MB/sec [4K blocks]
Uncached Read 33.97 6.30 MB/sec [256K blocks]
Results 36.40
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1536 MB
Model ACPI
Drive Type QUANTUM FIREBALLP AS20.5
CPU Test 29.07
GCD Loop 97.52 5.14 Mops/sec
Floating Point Basic 65.34 1.55 Gflop/sec
vecLib FFT 10.62 350.32 Mflop/sec
Floating Point Library 56.03 9.76 Mops/sec
Thread Test 64.09
Computation 45.93 930.50 Kops/sec, 4 threads
Lock Contention 105.98 4.56 Mlocks/sec, 4 threads
Memory Test 78.29
System 60.62
Allocate 207.52 762.07 Kalloc/sec
Fill 43.65 2122.57 MB/sec
Copy 45.95 949.08 MB/sec
Stream 110.49
Copy 115.45 2384.48 MB/sec
Scale 113.35 2341.76 MB/sec
Add 107.35 2286.68 MB/sec
Triad 106.34 2274.90 MB/sec
Quartz Graphics Test 66.61
Line 52.02 3.46 Klines/sec [50% alpha]
Rectangle 63.90 19.08 Krects/sec [50% alpha]
Circle 64.17 5.23 Kcircles/sec [50% alpha]
Bezier 86.58 2.18 Kbeziers/sec [50% alpha]
Text 76.55 4.79 Kchars/sec
OpenGL Graphics Test 34.03
Spinning Squares 34.03 43.17 frames/sec
User Interface Test 70.27
Elements 70.27 322.51 refresh/sec
Disk Test 14.10
Sequential 13.97
Uncached Write 10.98 6.74 MB/sec [4K blocks]
Uncached Write 11.77 6.66 MB/sec [256K blocks]
Uncached Read 24.62 7.20 MB/sec [4K blocks]
Uncached Read 14.36 7.22 MB/sec [256K blocks]
Random 14.23
Uncached Write 5.27 0.56 MB/sec [4K blocks]
Uncached Write 21.10 6.76 MB/sec [256K blocks]
Uncached Read 69.43 0.49 MB/sec [4K blocks]
Uncached Read 33.97 6.30 MB/sec [256K blocks]
P3 3,6 GHz, 2 GB DDR2, GF 6600 TF
Results 52.37
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 2048 MB
Drive Type ST3120026AS
CPU Test 22.45
GCD Loop 100.93 5.32 Mops/sec
Floating Point Basic 78.16 1.86 Gflop/sec
vecLib FFT 6.98 230.11 Mflop/sec
Floating Point Library 82.76 14.41 Mops/sec
Thread Test 94.35
Computation 84.25 1.71 Mops/sec, 4 threads
Lock Contention 107.21 4.61 Mlocks/sec, 4 threads
Memory Test 88.99
System 71.84
Allocate 121.72 446.99 Kalloc/sec
Fill 82.57 4014.66 MB/sec
Copy 46.66 963.81 MB/sec
Stream 116.89
Copy 118.75 2452.67 MB/sec
Scale 119.63 2471.42 MB/sec
Add 115.01 2449.85 MB/sec
Triad 114.34 2446.10 MB/sec
Quartz Graphics Test 83.87
Line 77.32 5.15 Klines/sec [50% alpha]
Rectangle 78.56 23.45 Krects/sec [50% alpha]
Circle 83.43 6.80 Kcircles/sec [50% alpha]
Bezier 104.22 2.63 Kbeziers/sec [50% alpha]
Text 80.85 5.06 Kchars/sec
OpenGL Graphics Test 49.37
Spinning Squares 49.37 62.63 frames/sec
User Interface Test 64.45
Elements 64.45 295.80 refresh/sec
Disk Test 51.03
Sequential 81.51
Uncached Write 107.00 65.69 MB/sec [4K blocks]
Uncached Write 94.50 53.47 MB/sec [256K blocks]
Uncached Read 51.79 15.16 MB/sec [4K blocks]
Uncached Read 101.63 51.08 MB/sec [256K blocks]
Random 37.14
Uncached Write 13.15 1.39 MB/sec [4K blocks]
Uncached Write 75.95 24.31 MB/sec [256K blocks]
Uncached Read 91.02 0.65 MB/sec [4K blocks]
Uncached Read 132.80 24.64 MB/sec [256K blocks]
Results 52.37
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 2048 MB
Drive Type ST3120026AS
CPU Test 22.45
GCD Loop 100.93 5.32 Mops/sec
Floating Point Basic 78.16 1.86 Gflop/sec
vecLib FFT 6.98 230.11 Mflop/sec
Floating Point Library 82.76 14.41 Mops/sec
Thread Test 94.35
Computation 84.25 1.71 Mops/sec, 4 threads
Lock Contention 107.21 4.61 Mlocks/sec, 4 threads
Memory Test 88.99
System 71.84
Allocate 121.72 446.99 Kalloc/sec
Fill 82.57 4014.66 MB/sec
Copy 46.66 963.81 MB/sec
Stream 116.89
Copy 118.75 2452.67 MB/sec
Scale 119.63 2471.42 MB/sec
Add 115.01 2449.85 MB/sec
Triad 114.34 2446.10 MB/sec
Quartz Graphics Test 83.87
Line 77.32 5.15 Klines/sec [50% alpha]
Rectangle 78.56 23.45 Krects/sec [50% alpha]
Circle 83.43 6.80 Kcircles/sec [50% alpha]
Bezier 104.22 2.63 Kbeziers/sec [50% alpha]
Text 80.85 5.06 Kchars/sec
OpenGL Graphics Test 49.37
Spinning Squares 49.37 62.63 frames/sec
User Interface Test 64.45
Elements 64.45 295.80 refresh/sec
Disk Test 51.03
Sequential 81.51
Uncached Write 107.00 65.69 MB/sec [4K blocks]
Uncached Write 94.50 53.47 MB/sec [256K blocks]
Uncached Read 51.79 15.16 MB/sec [4K blocks]
Uncached Read 101.63 51.08 MB/sec [256K blocks]
Random 37.14
Uncached Write 13.15 1.39 MB/sec [4K blocks]
Uncached Write 75.95 24.31 MB/sec [256K blocks]
Uncached Read 91.02 0.65 MB/sec [4K blocks]
Uncached Read 132.80 24.64 MB/sec [256K blocks]
P4 2.4 Northwood (NO SSE3), Via chipset, 1 GB DDR, GEFORCE 5200
Results 26.95
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Drive Type Maxtor 91366U4
CPU Test 16.36
GCD Loop 82.26 4.34 Mops/sec
Floating Point Basic 55.07 1.31 Gflop/sec
vecLib FFT 5.04 166.16 Mflop/sec
Floating Point Library 64.02 11.15 Mops/sec
Thread Test 61.77
Computation 45.84 928.57 Kops/sec, 4 threads
Lock Contention 94.66 4.07 Mlocks/sec, 4 threads
Memory Test 35.42
System 28.94
Allocate 95.06 349.08 Kalloc/sec
Fill 25.30 1230.18 MB/sec
Copy 18.66 385.33 MB/sec
Stream 45.62
Copy 45.25 934.64 MB/sec
Scale 45.22 934.22 MB/sec
Add 46.05 980.88 MB/sec
Triad 45.98 983.55 MB/sec
Quartz Graphics Test 33.36
Line 34.59 2.30 Klines/sec [50% alpha]
Rectangle 26.01 7.77 Krects/sec [50% alpha]
Circle 27.38 2.23 Kcircles/sec [50% alpha]
Bezier 65.33 1.65 Kbeziers/sec [50% alpha]
Text 32.58 2.04 Kchars/sec
OpenGL Graphics Test 31.82
Spinning Squares 31.82 40.37 frames/sec
User Interface Test 18.35
Elements 18.35 84.21 refresh/sec
Disk Test 26.10
Sequential 36.55
Uncached Write 28.05 17.22 MB/sec [4K blocks]
Uncached Write 29.75 16.83 MB/sec [256K blocks]
Uncached Read 67.40 19.73 MB/sec [4K blocks]
Uncached Read 39.47 19.84 MB/sec [256K blocks]
Random 20.30
Uncached Write 7.26 0.77 MB/sec [4K blocks]
Uncached Write 41.04 13.14 MB/sec [256K blocks]
Uncached Read 54.43 0.39 MB/sec [4K blocks]
Uncached Read 60.66 11.26 MB/sec [256K blocks]
Results 26.95
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Drive Type Maxtor 91366U4
CPU Test 16.36
GCD Loop 82.26 4.34 Mops/sec
Floating Point Basic 55.07 1.31 Gflop/sec
vecLib FFT 5.04 166.16 Mflop/sec
Floating Point Library 64.02 11.15 Mops/sec
Thread Test 61.77
Computation 45.84 928.57 Kops/sec, 4 threads
Lock Contention 94.66 4.07 Mlocks/sec, 4 threads
Memory Test 35.42
System 28.94
Allocate 95.06 349.08 Kalloc/sec
Fill 25.30 1230.18 MB/sec
Copy 18.66 385.33 MB/sec
Stream 45.62
Copy 45.25 934.64 MB/sec
Scale 45.22 934.22 MB/sec
Add 46.05 980.88 MB/sec
Triad 45.98 983.55 MB/sec
Quartz Graphics Test 33.36
Line 34.59 2.30 Klines/sec [50% alpha]
Rectangle 26.01 7.77 Krects/sec [50% alpha]
Circle 27.38 2.23 Kcircles/sec [50% alpha]
Bezier 65.33 1.65 Kbeziers/sec [50% alpha]
Text 32.58 2.04 Kchars/sec
OpenGL Graphics Test 31.82
Spinning Squares 31.82 40.37 frames/sec
User Interface Test 18.35
Elements 18.35 84.21 refresh/sec
Disk Test 26.10
Sequential 36.55
Uncached Write 28.05 17.22 MB/sec [4K blocks]
Uncached Write 29.75 16.83 MB/sec [256K blocks]
Uncached Read 67.40 19.73 MB/sec [4K blocks]
Uncached Read 39.47 19.84 MB/sec [256K blocks]
Random 20.30
Uncached Write 7.26 0.77 MB/sec [4K blocks]
Uncached Write 41.04 13.14 MB/sec [256K blocks]
Uncached Read 54.43 0.39 MB/sec [4K blocks]
Uncached Read 60.66 11.26 MB/sec [256K blocks]
Isnt there another more real testbench software with real software?
One More to Go with the stats:
Clevo D470K/ Sager 4750
Athlon 64 3200 DTR
1Gb DDR400
ATI Mobility Radeon 9700 128Mb[Dedicated]
60Gb IDE 7.200rpm
Clevo D470K/ Sager 4750
Athlon 64 3200 DTR
1Gb DDR400
ATI Mobility Radeon 9700 128Mb[Dedicated]
60Gb IDE 7.200rpm
CODE
Results 17.80
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type HTS726060M9AT00
CPU Test 13.11
GCD Loop 42.78 2.26 Mops/sec
Floating Point Basic 25.26 600.27 Mflop/sec
vecLib FFT 4.83 159.41 Mflop/sec
Floating Point Library 28.38 4.94 Mops/sec
Thread Test 26.90
Computation 19.80 401.14 Kops/sec, 4 threads
Lock Contention 41.93 1.80 Mlocks/sec, 4 threads
Memory Test 43.13
System 33.15
Allocate 88.63 325.49 Kalloc/sec
Fill 25.58 1243.79 MB/sec
Copy 24.92 514.67 MB/sec
Stream 61.71
Copy 60.37 1246.98 MB/sec
Scale 56.19 1160.77 MB/sec
Add 65.87 1403.27 MB/sec
Triad 65.45 1400.23 MB/sec
Quartz Graphics Test 17.74
Line 18.06 1.20 Klines/sec [50% alpha]
Rectangle 11.79 3.52 Krects/sec [50% alpha]
Circle 14.93 1.22 Kcircles/sec [50% alpha]
Bezier 36.76 927.10 beziers/sec [50% alpha]
Text 21.07 1.32 Kchars/sec
OpenGL Graphics Test 16.67
Spinning Squares 16.67 21.15 frames/sec
User Interface Test 9.55
Elements 9.55 43.85 refresh/sec
Disk Test 28.12
Sequential 43.58
Uncached Write 42.16 25.89 MB/sec [4K blocks]
Uncached Write 38.03 21.52 MB/sec [256K blocks]
Uncached Read 59.81 17.50 MB/sec [4K blocks]
Uncached Read 39.92 20.06 MB/sec [256K blocks]
Random 20.75
Uncached Write 7.03 0.74 MB/sec [4K blocks]
Uncached Write 45.15 14.45 MB/sec [256K blocks]
Uncached Read 70.85 0.50 MB/sec [4K blocks]
Uncached Read 69.77 12.95 MB/sec [256K blocks]
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type HTS726060M9AT00
CPU Test 13.11
GCD Loop 42.78 2.26 Mops/sec
Floating Point Basic 25.26 600.27 Mflop/sec
vecLib FFT 4.83 159.41 Mflop/sec
Floating Point Library 28.38 4.94 Mops/sec
Thread Test 26.90
Computation 19.80 401.14 Kops/sec, 4 threads
Lock Contention 41.93 1.80 Mlocks/sec, 4 threads
Memory Test 43.13
System 33.15
Allocate 88.63 325.49 Kalloc/sec
Fill 25.58 1243.79 MB/sec
Copy 24.92 514.67 MB/sec
Stream 61.71
Copy 60.37 1246.98 MB/sec
Scale 56.19 1160.77 MB/sec
Add 65.87 1403.27 MB/sec
Triad 65.45 1400.23 MB/sec
Quartz Graphics Test 17.74
Line 18.06 1.20 Klines/sec [50% alpha]
Rectangle 11.79 3.52 Krects/sec [50% alpha]
Circle 14.93 1.22 Kcircles/sec [50% alpha]
Bezier 36.76 927.10 beziers/sec [50% alpha]
Text 21.07 1.32 Kchars/sec
OpenGL Graphics Test 16.67
Spinning Squares 16.67 21.15 frames/sec
User Interface Test 9.55
Elements 9.55 43.85 refresh/sec
Disk Test 28.12
Sequential 43.58
Uncached Write 42.16 25.89 MB/sec [4K blocks]
Uncached Write 38.03 21.52 MB/sec [256K blocks]
Uncached Read 59.81 17.50 MB/sec [4K blocks]
Uncached Read 39.92 20.06 MB/sec [256K blocks]
Random 20.75
Uncached Write 7.03 0.74 MB/sec [4K blocks]
Uncached Write 45.15 14.45 MB/sec [256K blocks]
Uncached Read 70.85 0.50 MB/sec [4K blocks]
Uncached Read 69.77 12.95 MB/sec [256K blocks]
Just ran a baseline mac mini -1.25GHz G4- through Xbench, came up at 36.40 final results score (in case anyone was wondering how they'd compare against the more "price compatable" mac that's out there 
)
)
Heres mine, after Quite a bit of fine tweaking with ram & cpu settings:
Amd64 s939 3200+ Winchester 2.0ghz @ 2.45ghz
1g Pc4000 Corsair Ram (1 stick is burnt slightly and runs at only 266mhz and throttles my other stick)
Msi K8n-Neo2 Platinum Motherboard
Radeon 9600pro Gfx Card (No Drivers)
Cheers
HoZy
Amd64 s939 3200+ Winchester 2.0ghz @ 2.45ghz
1g Pc4000 Corsair Ram (1 stick is burnt slightly and runs at only 266mhz and throttles my other stick)
Msi K8n-Neo2 Platinum Motherboard
Radeon 9600pro Gfx Card (No Drivers)
CODE
Results 71.17
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type Apple read/write
CPU Test 39.58
GCD Loop 116.26 6.13 Mops/sec
Floating Point Basic 74.86 1.78 Gflop/sec
vecLib FFT 14.78 487.43 Mflop/sec
Floating Point Library 87.51 15.24 Mops/sec
Thread Test 81.94
Computation 57.84 1.17 Mops/sec, 4 threads
Lock Contention 140.47 6.04 Mlocks/sec, 4 threads
Memory Test 49.66
System 41.90
Allocate 220.98 811.50 Kalloc/sec
Fill 34.35 1669.97 MB/sec
Copy 26.35 544.20 MB/sec
Stream 60.93
Copy 58.42 1206.64 MB/sec
Scale 58.44 1207.28 MB/sec
Add 63.83 1359.62 MB/sec
Triad 63.50 1358.40 MB/sec
Quartz Graphics Test 148.31
Line 96.67 6.44 Klines/sec [50% alpha]
Rectangle 140.75 42.02 Krects/sec [50% alpha]
Circle 140.62 11.46 Kcircles/sec [50% alpha]
Bezier 135.57 3.42 Kbeziers/sec [50% alpha]
Text 562.76 35.20 Kchars/sec
OpenGL Graphics Test 40.98
Spinning Squares 40.98 51.99 frames/sec
User Interface Test 122.96
Elements 122.96 564.31 refresh/sec
Disk Test 682.01
Sequential 441.67
Uncached Write 299.64 183.97 MB/sec [4K blocks]
Uncached Write 593.94 336.05 MB/sec [256K blocks]
Uncached Read 355.43 104.02 MB/sec [4K blocks]
Uncached Read 818.42 411.33 MB/sec [256K blocks]
Random 1496.09
Uncached Write 784.61 83.06 MB/sec [4K blocks]
Uncached Write 1158.74 370.96 MB/sec [256K blocks]
Uncached Read 14180.53 100.49 MB/sec [4K blocks]
Uncached Read 2147.79 398.54 MB/sec [256K blocks]
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type Apple read/write
CPU Test 39.58
GCD Loop 116.26 6.13 Mops/sec
Floating Point Basic 74.86 1.78 Gflop/sec
vecLib FFT 14.78 487.43 Mflop/sec
Floating Point Library 87.51 15.24 Mops/sec
Thread Test 81.94
Computation 57.84 1.17 Mops/sec, 4 threads
Lock Contention 140.47 6.04 Mlocks/sec, 4 threads
Memory Test 49.66
System 41.90
Allocate 220.98 811.50 Kalloc/sec
Fill 34.35 1669.97 MB/sec
Copy 26.35 544.20 MB/sec
Stream 60.93
Copy 58.42 1206.64 MB/sec
Scale 58.44 1207.28 MB/sec
Add 63.83 1359.62 MB/sec
Triad 63.50 1358.40 MB/sec
Quartz Graphics Test 148.31
Line 96.67 6.44 Klines/sec [50% alpha]
Rectangle 140.75 42.02 Krects/sec [50% alpha]
Circle 140.62 11.46 Kcircles/sec [50% alpha]
Bezier 135.57 3.42 Kbeziers/sec [50% alpha]
Text 562.76 35.20 Kchars/sec
OpenGL Graphics Test 40.98
Spinning Squares 40.98 51.99 frames/sec
User Interface Test 122.96
Elements 122.96 564.31 refresh/sec
Disk Test 682.01
Sequential 441.67
Uncached Write 299.64 183.97 MB/sec [4K blocks]
Uncached Write 593.94 336.05 MB/sec [256K blocks]
Uncached Read 355.43 104.02 MB/sec [4K blocks]
Uncached Read 818.42 411.33 MB/sec [256K blocks]
Random 1496.09
Uncached Write 784.61 83.06 MB/sec [4K blocks]
Uncached Write 1158.74 370.96 MB/sec [256K blocks]
Uncached Read 14180.53 100.49 MB/sec [4K blocks]
Uncached Read 2147.79 398.54 MB/sec [256K blocks]
Cheers
HoZy
My goodness you have sick drive speeds Hozy 
QUOTE(Woodat @ Aug 26 2005, 12:06 PM)
My goodness you have sick drive speeds Hozy
NO JOKE Very nice...How did you get that fast???joneSi
This is my Bench with my new iMac PowerPC G5 based computer. Just for a comparison to the x86 world.
System Info
Xbench Version 1.2
System Version 10.4.2 (8C46)
Physical RAM 512 MB
Model PowerMac8,2
Processor PowerPC G5 @ 2.00 GHz
L1 Cache 64K (instruction), 32K (data)
L2 Cache 512K @ 2.00 GHz
Bus Frequency 667 MHz
Video Card ATY,RV351
Drive Type WDC WD2500JD-40HBC0
CPU Test 99.71
GCD Loop 96.11 5.07 Mops/sec
Floating Point Basic 100.54 2.39 Gflop/sec
vecLib FFT 102.49 3.38 Gflop/sec
Floating Point Library 99.90 17.40 Mops/sec
Thread Test 56.85
Computation 51.95 1.05 Mops/sec, 4 threads
Lock Contention 62.77 2.70 Mlocks/sec, 4 threads
Memory Test 64.67
System 68.49
Allocate 117.92 433.05 Kalloc/sec
Fill 75.01 3647.23 MB/sec
Copy 45.48 939.29 MB/sec
Stream 61.25
Copy 61.35 1267.13 MB/sec [G5]
Scale 61.44 1269.39 MB/sec [G5]
Add 61.20 1303.74 MB/sec [G5]
Triad 60.99 1304.70 MB/sec [G5]
Quartz Graphics Test 85.83
Line 86.18 5.74 Klines/sec [50% alpha]
Rectangle 90.27 26.95 Krects/sec [50% alpha]
Circle 90.88 7.41 Kcircles/sec [50% alpha]
Bezier 95.12 2.40 Kbeziers/sec [50% alpha]
Text 71.14 4.45 Kchars/sec
OpenGL Graphics Test 117.12
Spinning Squares 117.12 148.58 frames/sec
User Interface Test 57.12
Elements 57.12 262.13 refresh/sec
Disk Test 56.81
Sequential 78.65
Uncached Write 72.45 44.48 MB/sec [4K blocks]
Uncached Write 67.41 38.14 MB/sec [256K blocks]
Uncached Read 122.50 35.85 MB/sec [4K blocks]
Uncached Read 71.14 35.75 MB/sec [256K blocks]
Random 44.46
Uncached Write 17.87 1.89 MB/sec [4K blocks]
Uncached Write 70.36 22.52 MB/sec [256K blocks]
Uncached Read 92.49 0.66 MB/sec [4K blocks]
Uncached Read 111.15 20.62 MB/sec [256K blocks]
System Info
Xbench Version 1.2
System Version 10.4.2 (8C46)
Physical RAM 512 MB
Model PowerMac8,2
Processor PowerPC G5 @ 2.00 GHz
L1 Cache 64K (instruction), 32K (data)
L2 Cache 512K @ 2.00 GHz
Bus Frequency 667 MHz
Video Card ATY,RV351
Drive Type WDC WD2500JD-40HBC0
CPU Test 99.71
GCD Loop 96.11 5.07 Mops/sec
Floating Point Basic 100.54 2.39 Gflop/sec
vecLib FFT 102.49 3.38 Gflop/sec
Floating Point Library 99.90 17.40 Mops/sec
Thread Test 56.85
Computation 51.95 1.05 Mops/sec, 4 threads
Lock Contention 62.77 2.70 Mlocks/sec, 4 threads
Memory Test 64.67
System 68.49
Allocate 117.92 433.05 Kalloc/sec
Fill 75.01 3647.23 MB/sec
Copy 45.48 939.29 MB/sec
Stream 61.25
Copy 61.35 1267.13 MB/sec [G5]
Scale 61.44 1269.39 MB/sec [G5]
Add 61.20 1303.74 MB/sec [G5]
Triad 60.99 1304.70 MB/sec [G5]
Quartz Graphics Test 85.83
Line 86.18 5.74 Klines/sec [50% alpha]
Rectangle 90.27 26.95 Krects/sec [50% alpha]
Circle 90.88 7.41 Kcircles/sec [50% alpha]
Bezier 95.12 2.40 Kbeziers/sec [50% alpha]
Text 71.14 4.45 Kchars/sec
OpenGL Graphics Test 117.12
Spinning Squares 117.12 148.58 frames/sec
User Interface Test 57.12
Elements 57.12 262.13 refresh/sec
Disk Test 56.81
Sequential 78.65
Uncached Write 72.45 44.48 MB/sec [4K blocks]
Uncached Write 67.41 38.14 MB/sec [256K blocks]
Uncached Read 122.50 35.85 MB/sec [4K blocks]
Uncached Read 71.14 35.75 MB/sec [256K blocks]
Random 44.46
Uncached Write 17.87 1.89 MB/sec [4K blocks]
Uncached Write 70.36 22.52 MB/sec [256K blocks]
Uncached Read 92.49 0.66 MB/sec [4K blocks]
Uncached Read 111.15 20.62 MB/sec [256K blocks]
Pushed It A Little More,
Amd64 s939 Winchester 3200+ 2.0ghz @ 2.45ghz
Msi K8n-Neo2 Platinum M/Board
Radeon 9600pro 128mb Gfx/Card
1g Pc4000 Ram
80g WD Cavier Hard Drive
Ram Drive
Amd64 s939 Winchester 3200+ 2.0ghz @ 2.45ghz
Msi K8n-Neo2 Platinum M/Board
Radeon 9600pro 128mb Gfx/Card
1g Pc4000 Ram
80g WD Cavier Hard Drive
Ram Drive
CODE
Results 75.44
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type Apple read/write
CPU Test 39.39
GCD Loop 142.22 7.50 Mops/sec
Floating Point Basic 67.31 1.60 Gflop/sec
vecLib FFT 14.69 484.59 Mflop/sec
Floating Point Library 86.42 15.05 Mops/sec
Thread Test 83.71
Computation 61.79 1.25 Mops/sec, 4 threads
Lock Contention 129.71 5.58 Mlocks/sec, 4 threads
Memory Test 51.26
System 42.65
Allocate 227.70 836.21 Kalloc/sec
Fill 34.90 1697.06 MB/sec
Copy 26.81 553.70 MB/sec
Stream 64.23
Copy 61.58 1271.96 MB/sec
Scale 61.92 1279.18 MB/sec
Add 66.99 1427.00 MB/sec
Triad 66.84 1429.98 MB/sec
Quartz Graphics Test 151.97
Line 94.69 6.30 Klines/sec [50% alpha]
Rectangle 148.96 44.47 Krects/sec [50% alpha]
Circle 145.86 11.89 Kcircles/sec [50% alpha]
Bezier 141.31 3.56 Kbeziers/sec [50% alpha]
Text 590.01 36.91 Kchars/sec
OpenGL Graphics Test 49.22
Spinning Squares 49.22 62.44 frames/sec
User Interface Test 134.98
Elements 134.98 619.50 refresh/sec
Disk Test 608.93
Sequential 377.52
Uncached Write 173.39 106.46 MB/sec [4K blocks]
Uncached Write 726.45 411.02 MB/sec [256K blocks]
Uncached Read 438.74 128.40 MB/sec [4K blocks]
Uncached Read 853.03 428.73 MB/sec [256K blocks]
Random 1573.42
Uncached Write 797.04 84.38 MB/sec [4K blocks]
Uncached Write 1253.00 401.13 MB/sec [256K blocks]
Uncached Read 17230.30 122.10 MB/sec [4K blocks]
Uncached Read 2317.67 430.06 MB/sec [256K blocks]
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type Apple read/write
CPU Test 39.39
GCD Loop 142.22 7.50 Mops/sec
Floating Point Basic 67.31 1.60 Gflop/sec
vecLib FFT 14.69 484.59 Mflop/sec
Floating Point Library 86.42 15.05 Mops/sec
Thread Test 83.71
Computation 61.79 1.25 Mops/sec, 4 threads
Lock Contention 129.71 5.58 Mlocks/sec, 4 threads
Memory Test 51.26
System 42.65
Allocate 227.70 836.21 Kalloc/sec
Fill 34.90 1697.06 MB/sec
Copy 26.81 553.70 MB/sec
Stream 64.23
Copy 61.58 1271.96 MB/sec
Scale 61.92 1279.18 MB/sec
Add 66.99 1427.00 MB/sec
Triad 66.84 1429.98 MB/sec
Quartz Graphics Test 151.97
Line 94.69 6.30 Klines/sec [50% alpha]
Rectangle 148.96 44.47 Krects/sec [50% alpha]
Circle 145.86 11.89 Kcircles/sec [50% alpha]
Bezier 141.31 3.56 Kbeziers/sec [50% alpha]
Text 590.01 36.91 Kchars/sec
OpenGL Graphics Test 49.22
Spinning Squares 49.22 62.44 frames/sec
User Interface Test 134.98
Elements 134.98 619.50 refresh/sec
Disk Test 608.93
Sequential 377.52
Uncached Write 173.39 106.46 MB/sec [4K blocks]
Uncached Write 726.45 411.02 MB/sec [256K blocks]
Uncached Read 438.74 128.40 MB/sec [4K blocks]
Uncached Read 853.03 428.73 MB/sec [256K blocks]
Random 1573.42
Uncached Write 797.04 84.38 MB/sec [4K blocks]
Uncached Write 1253.00 401.13 MB/sec [256K blocks]
Uncached Read 17230.30 122.10 MB/sec [4K blocks]
Uncached Read 2317.67 430.06 MB/sec [256K blocks]
HoZy but... you have a RAM Disk? So... If I am right, your Hard Drive Tests are made in the DDR SDRAM...
AMD X2 4200
DFI SLI-DR motherboard
1GB Corsair TWIN XMS
Nvidia 6800GT(waiting for Drivers!?!?)
Sound onbard Realtek alc850(works with edited kext)
80 Maxtor PATA
Results 68.25
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type Maxtor 6Y080P0
CPU Test 37.94
GCD Loop 128.94 6.80 Mops/sec
Floating Point Basic 92.39 2.20 Gflop/sec
vecLib FFT 13.37 441.20 Mflop/sec
Floating Point Library 82.83 14.42 Mops/sec
Thread Test 145.84
Computation 110.93 2.25 Mops/sec, 4 threads
Lock Contention 212.80 9.15 Mlocks/sec, 4 threads
Memory Test 93.08
System 71.66
Allocate 167.03 613.40 Kalloc/sec
Fill 54.00 2625.77 MB/sec
Copy 57.60 1189.74 MB/sec
Stream 132.79
Copy 128.49 2653.84 MB/sec
Scale 127.40 2631.98 MB/sec
Add 138.53 2950.92 MB/sec
Triad 137.51 2941.74 MB/sec
Quartz Graphics Test 75.02
Line 76.88 5.12 Klines/sec [50% alpha]
Rectangle 62.89 18.78 Krects/sec [50% alpha]
Circle 61.98 5.05 Kcircles/sec [50% alpha]
Bezier 94.11 2.37 Kbeziers/sec [50% alpha]
Text 91.04 5.69 Kchars/sec
OpenGL Graphics Test 45.72
Spinning Squares 45.72 58.00 frames/sec
User Interface Test 93.90
Elements 93.90 430.94 refresh/sec
Disk Test 18.06
Sequential 14.19
Uncached Write 11.74 7.21 MB/sec [4K blocks]
Uncached Write 12.27 6.94 MB/sec [256K blocks]
Uncached Read 21.80 6.38 MB/sec [4K blocks]
Uncached Read 14.41 7.24 MB/sec [256K blocks]
Random 24.82
Uncached Write 13.63 1.44 MB/sec [4K blocks]
Uncached Write 22.54 7.21 MB/sec [256K blocks]
Uncached Read 75.68 0.54 MB/sec [4K blocks]
Uncached Read 33.10 6.14 MB/sec [256K blocks]
Dont know if thats a good score but there ya go! it looks like and feels like my hardrive is having issues with Read/Write speeds is there a fix for that yet? if i can get that working and my Nvidia running fully Accelerated then i just might think of using OS X and not Windows HAHAHA maybe not.
DFI SLI-DR motherboard
1GB Corsair TWIN XMS
Nvidia 6800GT(waiting for Drivers!?!?)
Sound onbard Realtek alc850(works with edited kext)
80 Maxtor PATA
Results 68.25
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ACPI
Drive Type Maxtor 6Y080P0
CPU Test 37.94
GCD Loop 128.94 6.80 Mops/sec
Floating Point Basic 92.39 2.20 Gflop/sec
vecLib FFT 13.37 441.20 Mflop/sec
Floating Point Library 82.83 14.42 Mops/sec
Thread Test 145.84
Computation 110.93 2.25 Mops/sec, 4 threads
Lock Contention 212.80 9.15 Mlocks/sec, 4 threads
Memory Test 93.08
System 71.66
Allocate 167.03 613.40 Kalloc/sec
Fill 54.00 2625.77 MB/sec
Copy 57.60 1189.74 MB/sec
Stream 132.79
Copy 128.49 2653.84 MB/sec
Scale 127.40 2631.98 MB/sec
Add 138.53 2950.92 MB/sec
Triad 137.51 2941.74 MB/sec
Quartz Graphics Test 75.02
Line 76.88 5.12 Klines/sec [50% alpha]
Rectangle 62.89 18.78 Krects/sec [50% alpha]
Circle 61.98 5.05 Kcircles/sec [50% alpha]
Bezier 94.11 2.37 Kbeziers/sec [50% alpha]
Text 91.04 5.69 Kchars/sec
OpenGL Graphics Test 45.72
Spinning Squares 45.72 58.00 frames/sec
User Interface Test 93.90
Elements 93.90 430.94 refresh/sec
Disk Test 18.06
Sequential 14.19
Uncached Write 11.74 7.21 MB/sec [4K blocks]
Uncached Write 12.27 6.94 MB/sec [256K blocks]
Uncached Read 21.80 6.38 MB/sec [4K blocks]
Uncached Read 14.41 7.24 MB/sec [256K blocks]
Random 24.82
Uncached Write 13.63 1.44 MB/sec [4K blocks]
Uncached Write 22.54 7.21 MB/sec [256K blocks]
Uncached Read 75.68 0.54 MB/sec [4K blocks]
Uncached Read 33.10 6.14 MB/sec [256K blocks]
Dont know if thats a good score but there ya go! it looks like and feels like my hardrive is having issues with Read/Write speeds is there a fix for that yet? if i can get that working and my Nvidia running fully Accelerated then i just might think of using OS X and not Windows HAHAHA maybe not.
QUOTE(Zeroboards00 @ Aug 29 2005, 08:00 PM)
Dont know if thats a good score but there ya go! it looks like and feels like my hardrive is having issues with Read/Write speeds is there a fix for that yet? if i can get that working and my Nvidia running fully Accelerated then i just might think of using OS X and not Windows HAHAHA maybe not.
Which is your MoBo's chipset, there are solutions for enable DMA or UDMA.
QUOTE(macgirl @ Aug 30 2005, 03:44 AM)
Which is your MoBo's chipset, there are solutions for enable DMA or UDMA.
I have a DFI Lan party SLI-DR. the chipset is Nforce4. ill check to see if i can choose that
QUOTE(Hexley @ Aug 30 2005, 02:40 AM)
HoZy but... you have a RAM Disk? So... If I am right, your Hard Drive Tests are made in the DDR SDRAM...
Even if i don't use ramdisk my hdd score in total 62 and my overall is still 65-68
Regards
HoZy
QUOTE(Zeroboards00 @ Aug 30 2005, 01:21 AM)
I have a DFI Lan party SLI-DR. the chipset is Nforce4. ill check to see if i can choose that
I modified the AppleOnboardPCATA.kext to see the nForce 4 PATA, and run from 4 MB/s to 75 MB/s, search in the forum for one of my posts on HowTo: Speed up hard disk access , I attached the kext there.
http://forum.osx86project.org/index.php?showtopic=517
I downloaded xBench and here are the results;
=> I'm running 10.4.1 right now and I hear that 10.4.3 will boost my numbers a bit, I just need to figure how to upgrade
=> The hardware is as follows;
-Motherboard: Asus A8N SLI Premium
-Processor: AMD 3200+ OC'd to 2.3ghz (Venice Core (full SSE3 support))
-Memory: Corsair 3200XL, 2x512mb OC'd to DDR460 at 2.5-3-3-5 timings
-Video Card: EVGA 7800GT
-Hard Drive: WD 160gb ATA100
CODE
Results 46.76
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ADP2,1
Drive Type WDC WD1600JB-53EVA0
CPU Test 38.13
GCD Loop 133.12 7.02 Mops/sec
Floating Point Basic 85.83 2.04 Gflop/sec
vecLib FFT 13.64 450.09 Mflop/sec
Floating Point Library 80.39 14.00 Mops/sec
Thread Test 81.63
Computation 56.85 1.15 Mops/sec, 4 threads
Lock Contention 144.69 6.22 Mlocks/sec, 4 threads
Memory Test 109.81
System 84.50
Allocate 250.79 921.00 Kalloc/sec
Fill 61.31 2981.20 MB/sec
Copy 65.77 1358.46 MB/sec
Stream 156.74
Copy 151.44 3128.04 MB/sec
Scale 151.32 3126.21 MB/sec
Add 163.27 3477.98 MB/sec
Triad 161.71 3459.46 MB/sec
Quartz Graphics Test 93.78
Line 77.38 5.15 Klines/sec [50% alpha]
Rectangle 97.74 29.18 Krects/sec [50% alpha]
Circle 97.76 7.97 Kcircles/sec [50% alpha]
Bezier 110.16 2.78 Kbeziers/sec [50% alpha]
Text 92.13 5.76 Kchars/sec
OpenGL Graphics Test 47.55
Spinning Squares 47.55 60.31 frames/sec
User Interface Test 115.64
Elements 115.64 530.75 refresh/sec
Disk Test 16.19
Sequential 13.26
Uncached Write 10.21 6.27 MB/sec [4K blocks]
Uncached Write 10.75 6.08 MB/sec [256K blocks]
Uncached Read 22.59 6.61 MB/sec [4K blocks]
Uncached Read 15.05 7.56 MB/sec [256K blocks]
Random 20.78
Uncached Write 10.15 1.07 MB/sec [4K blocks]
Uncached Write 19.19 6.14 MB/sec [256K blocks]
Uncached Read 73.13 0.52 MB/sec [4K blocks]
Uncached Read 35.47 6.58 MB/sec [256K blocks]
System Info
Xbench Version 1.2
System Version 10.4.1 (8B1025)
Physical RAM 1024 MB
Model ADP2,1
Drive Type WDC WD1600JB-53EVA0
CPU Test 38.13
GCD Loop 133.12 7.02 Mops/sec
Floating Point Basic 85.83 2.04 Gflop/sec
vecLib FFT 13.64 450.09 Mflop/sec
Floating Point Library 80.39 14.00 Mops/sec
Thread Test 81.63
Computation 56.85 1.15 Mops/sec, 4 threads
Lock Contention 144.69 6.22 Mlocks/sec, 4 threads
Memory Test 109.81
System 84.50
Allocate 250.79 921.00 Kalloc/sec
Fill 61.31 2981.20 MB/sec
Copy 65.77 1358.46 MB/sec
Stream 156.74
Copy 151.44 3128.04 MB/sec
Scale 151.32 3126.21 MB/sec
Add 163.27 3477.98 MB/sec
Triad 161.71 3459.46 MB/sec
Quartz Graphics Test 93.78
Line 77.38 5.15 Klines/sec [50% alpha]
Rectangle 97.74 29.18 Krects/sec [50% alpha]
Circle 97.76 7.97 Kcircles/sec [50% alpha]
Bezier 110.16 2.78 Kbeziers/sec [50% alpha]
Text 92.13 5.76 Kchars/sec
OpenGL Graphics Test 47.55
Spinning Squares 47.55 60.31 frames/sec
User Interface Test 115.64
Elements 115.64 530.75 refresh/sec
Disk Test 16.19
Sequential 13.26
Uncached Write 10.21 6.27 MB/sec [4K blocks]
Uncached Write 10.75 6.08 MB/sec [256K blocks]
Uncached Read 22.59 6.61 MB/sec [4K blocks]
Uncached Read 15.05 7.56 MB/sec [256K blocks]
Random 20.78
Uncached Write 10.15 1.07 MB/sec [4K blocks]
Uncached Write 19.19 6.14 MB/sec [256K blocks]
Uncached Read 73.13 0.52 MB/sec [4K blocks]
Uncached Read 35.47 6.58 MB/sec [256K blocks]
=> I'm running 10.4.1 right now and I hear that 10.4.3 will boost my numbers a bit, I just need to figure how to upgrade
=> The hardware is as follows;
-Motherboard: Asus A8N SLI Premium
-Processor: AMD 3200+ OC'd to 2.3ghz (Venice Core (full SSE3 support))
-Memory: Corsair 3200XL, 2x512mb OC'd to DDR460 at 2.5-3-3-5 timings
-Video Card: EVGA 7800GT
-Hard Drive: WD 160gb ATA100
This is 10.4.3 8f1099 with Maxxuss' ISO patch applied. At first I was getting results in the 60's. A subsequent install was giving me results in the 20's or less (diff disk possibly, incorrectly patched?), so I patched, burned and installed a new disc and now get the results below. Seems a little fast compared to what others are getting. Perhaps the 9800 pro makes the difference.
Pentium 4c @ 3.12ghz, Radeon 9800 Pro, 1 gb ram.
Results 76.35
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1099)
Physical RAM 1024 MB
Model ADP2,1
Drive Type WDC WD800JB-00ETA0
CPU Test 69.97
GCD Loop 117.69 6.20 Mops/sec
Floating Point Basic 80.94 1.92 Gflop/sec
vecLib FFT 43.54 1.44 Gflop/sec
Floating Point Library 74.89 13.04 Mops/sec
Thread Test 103.71
Computation 106.16 2.15 Mops/sec, 4 threads
Lock Contention 101.38 4.36 Mlocks/sec, 4 threads
Memory Test 96.84
System 95.05
Allocate 112.05 411.49 Kalloc/sec
Fill 89.89 4370.72 MB/sec
Copy 86.86 1794.11 MB/sec
Stream 98.69
Copy 90.30 1865.02 MB/sec
Scale 90.38 1867.20 MB/sec
Add 109.36 2329.52 MB/sec
Triad 108.16 2313.81 MB/sec
Quartz Graphics Test 71.52
Line 79.18 5.27 Klines/sec [50% alpha]
Rectangle 74.35 22.20 Krects/sec [50% alpha]
Circle 74.77 6.09 Kcircles/sec [50% alpha]
Bezier 93.25 2.35 Kbeziers/sec [50% alpha]
Text 50.66 3.17 Kchars/sec
OpenGL Graphics Test 93.25
Spinning Squares 93.25 118.29 frames/sec
User Interface Test 67.71
Elements 67.71 310.77 refresh/sec
Disk Test 55.71
Sequential 96.86
Uncached Write 103.70 63.67 MB/sec [4K blocks]
Uncached Write 102.05 57.74 MB/sec [256K blocks]
Uncached Read 95.18 27.85 MB/sec [4K blocks]
Uncached Read 88.12 44.29 MB/sec [256K blocks]
Random 39.09
Uncached Write 13.54 1.43 MB/sec [4K blocks]
Uncached Write 108.68 34.79 MB/sec [256K blocks]
Uncached Read 86.72 0.61 MB/sec [4K blocks]
Uncached Read 128.98 23.93 MB/sec [256K blocks]
Pentium 4c @ 3.12ghz, Radeon 9800 Pro, 1 gb ram.
Results 76.35
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1099)
Physical RAM 1024 MB
Model ADP2,1
Drive Type WDC WD800JB-00ETA0
CPU Test 69.97
GCD Loop 117.69 6.20 Mops/sec
Floating Point Basic 80.94 1.92 Gflop/sec
vecLib FFT 43.54 1.44 Gflop/sec
Floating Point Library 74.89 13.04 Mops/sec
Thread Test 103.71
Computation 106.16 2.15 Mops/sec, 4 threads
Lock Contention 101.38 4.36 Mlocks/sec, 4 threads
Memory Test 96.84
System 95.05
Allocate 112.05 411.49 Kalloc/sec
Fill 89.89 4370.72 MB/sec
Copy 86.86 1794.11 MB/sec
Stream 98.69
Copy 90.30 1865.02 MB/sec
Scale 90.38 1867.20 MB/sec
Add 109.36 2329.52 MB/sec
Triad 108.16 2313.81 MB/sec
Quartz Graphics Test 71.52
Line 79.18 5.27 Klines/sec [50% alpha]
Rectangle 74.35 22.20 Krects/sec [50% alpha]
Circle 74.77 6.09 Kcircles/sec [50% alpha]
Bezier 93.25 2.35 Kbeziers/sec [50% alpha]
Text 50.66 3.17 Kchars/sec
OpenGL Graphics Test 93.25
Spinning Squares 93.25 118.29 frames/sec
User Interface Test 67.71
Elements 67.71 310.77 refresh/sec
Disk Test 55.71
Sequential 96.86
Uncached Write 103.70 63.67 MB/sec [4K blocks]
Uncached Write 102.05 57.74 MB/sec [256K blocks]
Uncached Read 95.18 27.85 MB/sec [4K blocks]
Uncached Read 88.12 44.29 MB/sec [256K blocks]
Random 39.09
Uncached Write 13.54 1.43 MB/sec [4K blocks]
Uncached Write 108.68 34.79 MB/sec [256K blocks]
Uncached Read 86.72 0.61 MB/sec [4K blocks]
Uncached Read 128.98 23.93 MB/sec [256K blocks]
amd3200+939
ati9600pro
msi neo pe nfs3
IDE 60G
Results 2.29
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1099)
Physical RAM 512 MB
Model ADP2,1
Drive Type ST360021A
CPU Test 69.05
GCD Loop 116.09 6.12 Mops/sec
Floating Point Basic 84.24 2.00 Gflop/sec
vecLib FFT 42.11 1.39 Gflop/sec
Floating Point Library 72.99 12.71 Mops/sec
Thread Test 73.48
Computation 50.90 1.03 Mops/sec, 4 threads
Lock Contention 132.04 5.68 Mlocks/sec, 4 threads
Memory Test 123.48
System 137.82
Allocate 248.29 911.79 Kalloc/sec
Fill 117.08 5692.92 MB/sec
Copy 108.71 2245.35 MB/sec
Stream 111.85
Copy 112.63 2326.25 MB/sec
Scale 108.35 2238.38 MB/sec
Add 113.69 2421.80 MB/sec
Triad 112.89 2414.97 MB/sec
Quartz Graphics Test 1.20
Line 1.50 99.64 lines/sec [50% alpha]
Rectangle 0.54 160.43 rects/sec [50% alpha]
Circle 0.87 71.18 circles/sec [50% alpha]
Bezier 5.53 139.58 beziers/sec [50% alpha]
Text 3.18 199.21 chars/sec
OpenGL Graphics Test 47.19
Spinning Squares 47.19 59.86 frames/sec
User Interface Test 0.47
Elements 0.47 2.15 refresh/sec
Disk Test 34.80
Sequential 55.03
Uncached Write 47.50 29.16 MB/sec [4K blocks]
Uncached Write 71.49 40.45 MB/sec [256K blocks]
Uncached Read 39.57 11.58 MB/sec [4K blocks]
Uncached Read 80.79 40.60 MB/sec [256K blocks]
Random 25.45
Uncached Write 8.33 0.88 MB/sec [4K blocks]
Uncached Write 62.01 19.85 MB/sec [256K blocks]
Uncached Read 83.23 0.59 MB/sec [4K blocks]
Uncached Read 112.12 20.80 MB/sec [256K blocks]
ati9600pro
msi neo pe nfs3
IDE 60G
Results 2.29
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1099)
Physical RAM 512 MB
Model ADP2,1
Drive Type ST360021A
CPU Test 69.05
GCD Loop 116.09 6.12 Mops/sec
Floating Point Basic 84.24 2.00 Gflop/sec
vecLib FFT 42.11 1.39 Gflop/sec
Floating Point Library 72.99 12.71 Mops/sec
Thread Test 73.48
Computation 50.90 1.03 Mops/sec, 4 threads
Lock Contention 132.04 5.68 Mlocks/sec, 4 threads
Memory Test 123.48
System 137.82
Allocate 248.29 911.79 Kalloc/sec
Fill 117.08 5692.92 MB/sec
Copy 108.71 2245.35 MB/sec
Stream 111.85
Copy 112.63 2326.25 MB/sec
Scale 108.35 2238.38 MB/sec
Add 113.69 2421.80 MB/sec
Triad 112.89 2414.97 MB/sec
Quartz Graphics Test 1.20
Line 1.50 99.64 lines/sec [50% alpha]
Rectangle 0.54 160.43 rects/sec [50% alpha]
Circle 0.87 71.18 circles/sec [50% alpha]
Bezier 5.53 139.58 beziers/sec [50% alpha]
Text 3.18 199.21 chars/sec
OpenGL Graphics Test 47.19
Spinning Squares 47.19 59.86 frames/sec
User Interface Test 0.47
Elements 0.47 2.15 refresh/sec
Disk Test 34.80
Sequential 55.03
Uncached Write 47.50 29.16 MB/sec [4K blocks]
Uncached Write 71.49 40.45 MB/sec [256K blocks]
Uncached Read 39.57 11.58 MB/sec [4K blocks]
Uncached Read 80.79 40.60 MB/sec [256K blocks]
Random 25.45
Uncached Write 8.33 0.88 MB/sec [4K blocks]
Uncached Write 62.01 19.85 MB/sec [256K blocks]
Uncached Read 83.23 0.59 MB/sec [4K blocks]
Uncached Read 112.12 20.80 MB/sec [256K blocks]
QUOTE(tuisan @ Dec 8 2005, 08:25 AM)
amd3200+939
ati9600pro
msi neo pe nfs3
IDE 60G
Results 2.29
ati9600pro
msi neo pe nfs3
IDE 60G
Results 2.29
Bwahahaha.. what happened!? That should be somewhere around the 60-80+ range shouldn't it? Not laughing at you, but laughing WITH you...
My computer running OSX86 Tiger 10.4.3 native:
AMD Athlon 64 3000+ with SS3 512k cache
Mother ASUS A8N-SLI win 1GB DDR 400
Video ATI X600 Pro gCube with 256 MB (CI and QE enable)
HD PATA IBM 60GB 7.200 rpm
DVD Burner LG
Sound On-boad running
Network Card Realtek 8139 off-board
Firewire 400
Mouse Microsoft Intelipoint USB
Keyboard wireless
XBench Results: 71.36
AMD Athlon 64 3000+ with SS3 512k cache
Mother ASUS A8N-SLI win 1GB DDR 400
Video ATI X600 Pro gCube with 256 MB (CI and QE enable)
HD PATA IBM 60GB 7.200 rpm
DVD Burner LG
Sound On-boad running
Network Card Realtek 8139 off-board
Firewire 400
Mouse Microsoft Intelipoint USB
Keyboard wireless
XBench Results: 71.36
marcusmaia, you posted the same post not twice, but three times in different threads, please dont and follow the Forum rules.
Yeah, we notice your score though.
Yeah, we notice your score though.
Xbench 1.2 (8F1099):
Results 80.00
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1099)
Physical RAM 512 MB
Model ADP2,1
Drive Type WDC WD400BB-75FRA0
CPU Test 65.48
GCD Loop 87.53 4.61 Mops/sec
Floating Point Basic 76.91 1.83 Gflop/sec
vecLib FFT 47.07 1.55 Gflop/sec
Floating Point Library 64.87 11.30 Mops/sec
Thread Test 81.29
Computation 76.61 1.55 Mops/sec, 4 threads
Lock Contention 86.59 3.72 Mlocks/sec, 4 threads
Memory Test 84.26
System 91.28
Allocate 122.93 451.45 Kalloc/sec
Fill 84.92 4129.25 MB/sec
Copy 77.19 1594.38 MB/sec
Stream 78.24
Copy 74.13 1531.17 MB/sec
Scale 75.46 1559.00 MB/sec
Add 82.39 1755.15 MB/sec
Triad 81.63 1746.35 MB/sec
Quartz Graphics Test 82.18
Line 91.53 6.09 Klines/sec [50% alpha]
Rectangle 88.05 26.29 Krects/sec [50% alpha]
Circle 88.75 7.23 Kcircles/sec [50% alpha]
Bezier 102.09 2.57 Kbeziers/sec [50% alpha]
Text 57.16 3.58 Kchars/sec
OpenGL Graphics Test 163.16
Spinning Squares 163.16 206.98 frames/sec
User Interface Test 106.15
Elements 106.15 487.17 refresh/sec
Disk Test 49.17
Sequential 88.03
Uncached Write 96.34 59.15 MB/sec [4K blocks]
Uncached Write 91.25 51.63 MB/sec [256K blocks]
Uncached Read 88.85 26.00 MB/sec [4K blocks]
Uncached Read 77.84 39.12 MB/sec [256K blocks]
Random 34.12
Uncached Write 12.01 1.27 MB/sec [4K blocks]
Uncached Write 74.76 23.93 MB/sec [256K blocks]
Uncached Read 83.18 0.59 MB/sec [4K blocks]
Uncached Read 116.45 21.61 MB/sec [256K blocks]
Results 80.00
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1099)
Physical RAM 512 MB
Model ADP2,1
Drive Type WDC WD400BB-75FRA0
CPU Test 65.48
GCD Loop 87.53 4.61 Mops/sec
Floating Point Basic 76.91 1.83 Gflop/sec
vecLib FFT 47.07 1.55 Gflop/sec
Floating Point Library 64.87 11.30 Mops/sec
Thread Test 81.29
Computation 76.61 1.55 Mops/sec, 4 threads
Lock Contention 86.59 3.72 Mlocks/sec, 4 threads
Memory Test 84.26
System 91.28
Allocate 122.93 451.45 Kalloc/sec
Fill 84.92 4129.25 MB/sec
Copy 77.19 1594.38 MB/sec
Stream 78.24
Copy 74.13 1531.17 MB/sec
Scale 75.46 1559.00 MB/sec
Add 82.39 1755.15 MB/sec
Triad 81.63 1746.35 MB/sec
Quartz Graphics Test 82.18
Line 91.53 6.09 Klines/sec [50% alpha]
Rectangle 88.05 26.29 Krects/sec [50% alpha]
Circle 88.75 7.23 Kcircles/sec [50% alpha]
Bezier 102.09 2.57 Kbeziers/sec [50% alpha]
Text 57.16 3.58 Kchars/sec
OpenGL Graphics Test 163.16
Spinning Squares 163.16 206.98 frames/sec
User Interface Test 106.15
Elements 106.15 487.17 refresh/sec
Disk Test 49.17
Sequential 88.03
Uncached Write 96.34 59.15 MB/sec [4K blocks]
Uncached Write 91.25 51.63 MB/sec [256K blocks]
Uncached Read 88.85 26.00 MB/sec [4K blocks]
Uncached Read 77.84 39.12 MB/sec [256K blocks]
Random 34.12
Uncached Write 12.01 1.27 MB/sec [4K blocks]
Uncached Write 74.76 23.93 MB/sec [256K blocks]
Uncached Read 83.18 0.59 MB/sec [4K blocks]
Uncached Read 116.45 21.61 MB/sec [256K blocks]
You can say my score dropped ~20 points when I upgraded and X-benched today.
:-(
:-(
Got 66.44 with the next hardware:
Gigabyte GA-8I915G-MF-ED (i915 chipset)
GMA 900 onboard (working)
Onboard NIC (working)
Onboard SND ALC880 (not working)
Cheap ass CMI8738 audio (not working since 10.4.3, still need to rebuild the driver)
Intel Pentium 4 540J (3,2Ghz / HT / SSE2 & SSE3 / PEA / 1MB)
2,5 GB RAM (3x 512MB + 1024MB)
WD Raptor 10.000 rpm / 36GB
With 10.4.1 I've only got around 43.
System whas running fine but due to problems with ppc emulation, I've installed 10.4.3 (8F1111) on it.
The system now seams more responive, and it's really great that iTunes 6.0.2 for intel is included :-)
Are there still any improvements I can make, just to get the last juice out of it?
Gigabyte GA-8I915G-MF-ED (i915 chipset)
GMA 900 onboard (working)
Onboard NIC (working)
Onboard SND ALC880 (not working)
Cheap ass CMI8738 audio (not working since 10.4.3, still need to rebuild the driver)
Intel Pentium 4 540J (3,2Ghz / HT / SSE2 & SSE3 / PEA / 1MB)
2,5 GB RAM (3x 512MB + 1024MB)
WD Raptor 10.000 rpm / 36GB
With 10.4.1 I've only got around 43.
System whas running fine but due to problems with ppc emulation, I've installed 10.4.3 (8F1111) on it.
The system now seams more responive, and it's really great that iTunes 6.0.2 for intel is included :-)
Are there still any improvements I can make, just to get the last juice out of it?
QUOTE
Results 66.44
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1111)
Physical RAM 2560 MB
Model ADP2,1
Drive Type WDC WD360GD-00FLA2
CPU Test 70.33
GCD Loop 97.07 5.12 Mops/sec
Floating Point Basic 74.38 1.77 Gflop/sec
vecLib FFT 54.81 1.81 Gflop/sec
Floating Point Library 67.20 11.70 Mops/sec
Thread Test 102.14
Computation 87.88 1.78 Mops/sec, 4 threads
Lock Contention 121.93 5.25 Mlocks/sec, 4 threads
Memory Test 63.82
System 64.90
Allocate 71.23 261.59 Kalloc/sec
Fill 83.88 4078.52 MB/sec
Copy 49.35 1019.26 MB/sec
Stream 62.77
Copy 61.07 1261.33 MB/sec
Scale 60.91 1258.31 MB/sec
Add 65.12 1387.28 MB/sec
Triad 64.22 1373.87 MB/sec
Quartz Graphics Test 54.23
Line 49.29 3.28 Klines/sec [50% alpha]
Rectangle 47.91 14.30 Krects/sec [50% alpha]
Circle 46.21 3.77 Kcircles/sec [50% alpha]
Bezier 83.97 2.12 Kbeziers/sec [50% alpha]
Text 57.19 3.58 Kchars/sec
OpenGL Graphics Test 141.31
Spinning Squares 141.31 179.26 frames/sec
User Interface Test 38.49
Elements 38.49 176.65 refresh/sec
Disk Test 70.51
Sequential 106.69
Uncached Write 114.74 70.45 MB/sec [4K blocks]
Uncached Write 113.79 64.38 MB/sec [256K blocks]
Uncached Read 103.20 30.20 MB/sec [4K blocks]
Uncached Read 97.10 48.80 MB/sec [256K blocks]
Random 52.65
Uncached Write 18.52 1.96 MB/sec [4K blocks]
Uncached Write 129.43 41.43 MB/sec [256K blocks]
Uncached Read 122.65 0.87 MB/sec [4K blocks]
Uncached Read 163.70 30.38 MB/sec [256K blocks]
System Info
Xbench Version 1.2
System Version 10.4.3 (8F1111)
Physical RAM 2560 MB
Model ADP2,1
Drive Type WDC WD360GD-00FLA2
CPU Test 70.33
GCD Loop 97.07 5.12 Mops/sec
Floating Point Basic 74.38 1.77 Gflop/sec
vecLib FFT 54.81 1.81 Gflop/sec
Floating Point Library 67.20 11.70 Mops/sec
Thread Test 102.14
Computation 87.88 1.78 Mops/sec, 4 threads
Lock Contention 121.93 5.25 Mlocks/sec, 4 threads
Memory Test 63.82
System 64.90
Allocate 71.23 261.59 Kalloc/sec
Fill 83.88 4078.52 MB/sec
Copy 49.35 1019.26 MB/sec
Stream 62.77
Copy 61.07 1261.33 MB/sec
Scale 60.91 1258.31 MB/sec
Add 65.12 1387.28 MB/sec
Triad 64.22 1373.87 MB/sec
Quartz Graphics Test 54.23
Line 49.29 3.28 Klines/sec [50% alpha]
Rectangle 47.91 14.30 Krects/sec [50% alpha]
Circle 46.21 3.77 Kcircles/sec [50% alpha]
Bezier 83.97 2.12 Kbeziers/sec [50% alpha]
Text 57.19 3.58 Kchars/sec
OpenGL Graphics Test 141.31
Spinning Squares 141.31 179.26 frames/sec
User Interface Test 38.49
Elements 38.49 176.65 refresh/sec
Disk Test 70.51
Sequential 106.69
Uncached Write 114.74 70.45 MB/sec [4K blocks]
Uncached Write 113.79 64.38 MB/sec [256K blocks]
Uncached Read 103.20 30.20 MB/sec [4K blocks]
Uncached Read 97.10 48.80 MB/sec [256K blocks]
Random 52.65
Uncached Write 18.52 1.96 MB/sec [4K blocks]
Uncached Write 129.43 41.43 MB/sec [256K blocks]
Uncached Read 122.65 0.87 MB/sec [4K blocks]
Uncached Read 163.70 30.38 MB/sec [256K blocks]
I just added a 300GB 7200RPM Maxtor SATA hard drive with 16MB's of cache. It boosted my Xbench score by ~10 points, now I'm at around 70 points. A new GPU (x600/x700) will for sure bring me to ~80-85, another 512 stick will probably bring me to ~95 (b/c when I have 2 sticks in my MoBo, it enables a Dual Channel memory bus).
My system:
2x2.7 GHz PPC
Bus 1.35 GHz per processor
2 GB RAM
Ati X850XT with 256 MB
HDD SATA 250 GB @ 7200 rpm
Result in Xbench: 116.40
2x2.7 GHz PPC
Bus 1.35 GHz per processor
2 GB RAM
Ati X850XT with 256 MB
HDD SATA 250 GB @ 7200 rpm
Result in Xbench: 116.40
QUOTE(altero @ Jan 31 2006, 08:44 AM)
My system:
2x2.7 GHz PPC
Bus 1.35 GHz per processor
2 GB RAM
Ati X850XT with 256 MB
HDD SATA 250 GB @ 7200 rpm
Result in Xbench: 116.40
2x2.7 GHz PPC
Bus 1.35 GHz per processor
2 GB RAM
Ati X850XT with 256 MB
HDD SATA 250 GB @ 7200 rpm
Result in Xbench: 116.40
if thats your native score, im really happy about not buying a G5. LOL
mine is pretty much that speed with no driver support and IDE interface
QUOTE(Careless @ Jan 31 2006, 10:50 AM)
if thats your native score, im really happy about not buying a G5. LOL
mine is pretty much that speed with no driver support and IDE interface
mine is pretty much that speed with no driver support and IDE interface
Hahahaha. Your opteron is as fast as a G5.
I've a a dual Opteron 244 that I intend attempting to install OSX on, does anyone know if it will work with a twin CPU box?
Rgds
Rgds
Just installed 10.4.3 using the JaS 4.2b patch and scored 79.68 with Xbench 
Here is my hardware:
AMD Athlon 3200+ 939 Venice Core (OC'd @ 2330mhz)
Asus A8N SLI Prem m/b (OC'd @ 233mhz)
1gig DDR400 ram, Corsair 3200XL OC'd @ DDR466, 2.5-3-3-8 timings
7800 GT Video Card, EVGA, 256mb (475/1070mhz for gpu/gm)
OSX installed on WD16000JD HD, ATA100, 7200rpm, 8mb cache
-A big jump over my 10.4.1 #s
Use the JaS 10.4.3 Patch which should enable you to use just about any type of CPU, and yes dual processors are supported. If your crazy about optimizing the kernel for your CPU check Maxxuss's site for ways to do so, I believe the Jas Patch'd OSX will install a SSE3 emulated kernel by default...anyone know for sure?
Here is my hardware:
AMD Athlon 3200+ 939 Venice Core (OC'd @ 2330mhz)
Asus A8N SLI Prem m/b (OC'd @ 233mhz)
1gig DDR400 ram, Corsair 3200XL OC'd @ DDR466, 2.5-3-3-8 timings
7800 GT Video Card, EVGA, 256mb (475/1070mhz for gpu/gm)
OSX installed on WD16000JD HD, ATA100, 7200rpm, 8mb cache
-A big jump over my 10.4.1 #s
QUOTE(stew @ Feb 1 2006, 08:23 PM)
I've a a dual Opteron 244 that I intend attempting to install OSX on, does anyone know if it will work with a twin CPU box?
Use the JaS 10.4.3 Patch which should enable you to use just about any type of CPU, and yes dual processors are supported. If your crazy about optimizing the kernel for your CPU check Maxxuss's site for ways to do so, I believe the Jas Patch'd OSX will install a SSE3 emulated kernel by default...anyone know for sure?
I think I just ate that Dual 2.7 G5 for breakfast:
Pentium 4 640 @ 3.85Ghz
Asus P5GV-MX (915GV Chipset)
2GB Dual Channel OCZ Platinum DDR400 (2-3-2-5)
Maxtor 250GB Sata
Intel GMA 900 (QE & CI Supported)
Taken from System Profiler:
Machine Name: jMac
Machine Model: ADP2,1
CPU Type: Intel® Pentium® 4 CPU
Number Of CPUs: 1
CPU Speed: 3.85 GHz
L2 Cache (per CPU): 2 MB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL EST CX16 TPR
Memory: 2 GB
Bus Speed: 960 MHz
Boot ROM Version: 0401 (American Megatrends Inc.)
Serial Number: System Sber
Results 130.83
System Info
Xbench Version 1.2
System Version 10.4.6 (8I1119)
Physical RAM 2048 MB
Model ADP2,1
Drive Type Maxtor 6L250S0
CPU Test 83.37
GCD Loop 117.04 6.17 Mops/sec
Floating Point Basic 91.40 2.17 Gflop/sec
vecLib FFT 60.85 2.01 Gflop/sec
Floating Point Library 82.93 14.44 Mops/sec
Thread Test 130.16
Computation 106.07 2.15 Mops/sec, 4 threads
Lock Contention 168.42 7.25 Mlocks/sec, 4 threads
Memory Test 132.20
System 128.79
Allocate 94.32 346.36 Kalloc/sec
Fill 151.36 7359.51 MB/sec
Copy 164.35 3394.50 MB/sec
Stream 135.80
Copy 133.64 2760.26 MB/sec
Scale 137.11 2832.61 MB/sec
Add 136.91 2916.51 MB/sec
Triad 135.62 2901.17 MB/sec
Quartz Graphics Test 117.00
Line 133.58 8.89 Klines/sec [50% alpha]
Rectangle 128.66 38.41 Krects/sec [50% alpha]
Circle 127.58 10.40 Kcircles/sec [50% alpha]
Bezier 128.78 3.25 Kbeziers/sec [50% alpha]
Text 84.24 5.27 Kchars/sec
OpenGL Graphics Test 251.13
Spinning Squares 251.13 318.57 frames/sec
User Interface Test 199.62
Elements 199.62 916.14 refresh/sec
Disk Test 114.59
Sequential 129.33
Uncached Write 124.95 76.72 MB/sec [4K blocks]
Uncached Write 124.56 70.48 MB/sec [256K blocks]
Uncached Read 143.94 42.13 MB/sec [4K blocks]
Uncached Read 125.77 63.21 MB/sec [256K blocks]
Random 102.86
Uncached Write 77.76 8.23 MB/sec [4K blocks]
Uncached Write 118.14 37.82 MB/sec [256K blocks]
Uncached Read 102.26 0.72 MB/sec [4K blocks]
Uncached Read 128.49 23.84 MB/sec [256K blocks]
Pentium 4 640 @ 3.85Ghz
Asus P5GV-MX (915GV Chipset)
2GB Dual Channel OCZ Platinum DDR400 (2-3-2-5)
Maxtor 250GB Sata
Intel GMA 900 (QE & CI Supported)
Taken from System Profiler:
Machine Name: jMac
Machine Model: ADP2,1
CPU Type: Intel® Pentium® 4 CPU
Number Of CPUs: 1
CPU Speed: 3.85 GHz
L2 Cache (per CPU): 2 MB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL EST CX16 TPR
Memory: 2 GB
Bus Speed: 960 MHz
Boot ROM Version: 0401 (American Megatrends Inc.)
Serial Number: System Sber
Results 130.83
System Info
Xbench Version 1.2
System Version 10.4.6 (8I1119)
Physical RAM 2048 MB
Model ADP2,1
Drive Type Maxtor 6L250S0
CPU Test 83.37
GCD Loop 117.04 6.17 Mops/sec
Floating Point Basic 91.40 2.17 Gflop/sec
vecLib FFT 60.85 2.01 Gflop/sec
Floating Point Library 82.93 14.44 Mops/sec
Thread Test 130.16
Computation 106.07 2.15 Mops/sec, 4 threads
Lock Contention 168.42 7.25 Mlocks/sec, 4 threads
Memory Test 132.20
System 128.79
Allocate 94.32 346.36 Kalloc/sec
Fill 151.36 7359.51 MB/sec
Copy 164.35 3394.50 MB/sec
Stream 135.80
Copy 133.64 2760.26 MB/sec
Scale 137.11 2832.61 MB/sec
Add 136.91 2916.51 MB/sec
Triad 135.62 2901.17 MB/sec
Quartz Graphics Test 117.00
Line 133.58 8.89 Klines/sec [50% alpha]
Rectangle 128.66 38.41 Krects/sec [50% alpha]
Circle 127.58 10.40 Kcircles/sec [50% alpha]
Bezier 128.78 3.25 Kbeziers/sec [50% alpha]
Text 84.24 5.27 Kchars/sec
OpenGL Graphics Test 251.13
Spinning Squares 251.13 318.57 frames/sec
User Interface Test 199.62
Elements 199.62 916.14 refresh/sec
Disk Test 114.59
Sequential 129.33
Uncached Write 124.95 76.72 MB/sec [4K blocks]
Uncached Write 124.56 70.48 MB/sec [256K blocks]
Uncached Read 143.94 42.13 MB/sec [4K blocks]
Uncached Read 125.77 63.21 MB/sec [256K blocks]
Random 102.86
Uncached Write 77.76 8.23 MB/sec [4K blocks]
Uncached Write 118.14 37.82 MB/sec [256K blocks]
Uncached Read 102.26 0.72 MB/sec [4K blocks]
Uncached Read 128.49 23.84 MB/sec [256K blocks]
HP Compaq NW8000
Brand spanking new install, no tweaking except graphics set to 1600x1200x32
From System Profiler:
Hardware Overview:
Machine Name: jMac
Machine Model: ADP2,1
CPU Type: Intel® Pentium® M processor
Number Of CPUs: 1
CPU Speed: 2 GHz
L2 Cache (per CPU): 2 MB
CPU Features: FPU VME DE PSE TSC MSR MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST
Memory: 1 GB
Bus Speed: 400 MHz
Boot ROM Version: 68BAR Ver. F.16 (Hewlett-Packard)
Results 43.61
System Info
Xbench Version 1.2
System Version 10.4.6 (8I1119)
Physical RAM 1025 MB
Model ADP2,1
Drive Type HTS726060M9AT00
CPU Test 63.00
GCD Loop 246.70 13.00 Mops/sec
Floating Point Basic 52.84 1.26 Gflop/sec
vecLib FFT 39.51 1.30 Gflop/sec
Floating Point Library 65.78 11.45 Mops/sec
Thread Test 106.37
Computation 80.74 1.64 Mops/sec, 4 threads
Lock Contention 155.82 6.70 Mlocks/sec, 4 threads
Memory Test 58.53
System 75.12
Allocate 84.16 309.06 Kalloc/sec
Fill 71.36 3469.58 MB/sec
Copy 71.22 1470.93 MB/sec
Stream 47.94
Copy 42.23 872.24 MB/sec
Scale 44.39 917.04 MB/sec
Add 53.88 1147.70 MB/sec
Triad 53.58 1146.24 MB/sec
Quartz Graphics Test 50.89
Line 41.35 2.75 Klines/sec [50% alpha]
Rectangle 40.83 12.19 Krects/sec [50% alpha]
Circle 41.39 3.37 Kcircles/sec [50% alpha]
Bezier 79.80 2.01 Kbeziers/sec [50% alpha]
Text 77.59 4.85 Kchars/sec
OpenGL Graphics Test 38.06
Spinning Squares 38.06 48.28 frames/sec
User Interface Test 21.42
Elements 21.42 98.31 refresh/sec
Disk Test 39.16
Sequential 70.62
Uncached Write 72.23 44.35 MB/sec [4K blocks]
Uncached Write 67.04 37.93 MB/sec [256K blocks]
Uncached Read 71.83 21.02 MB/sec [4K blocks]
Uncached Read 71.65 36.01 MB/sec [256K blocks]
Random 27.09
Uncached Write 9.14 0.97 MB/sec [4K blocks]
Uncached Write 70.82 22.67 MB/sec [256K blocks]
Uncached Read 75.84 0.54 MB/sec [4K blocks]
Uncached Read 91.39 16.96 MB/sec [256K blocks]
Brand spanking new install, no tweaking except graphics set to 1600x1200x32
From System Profiler:
Hardware Overview:
Machine Name: jMac
Machine Model: ADP2,1
CPU Type: Intel® Pentium® M processor
Number Of CPUs: 1
CPU Speed: 2 GHz
L2 Cache (per CPU): 2 MB
CPU Features: FPU VME DE PSE TSC MSR MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST
Memory: 1 GB
Bus Speed: 400 MHz
Boot ROM Version: 68BAR Ver. F.16 (Hewlett-Packard)
Results 43.61
System Info
Xbench Version 1.2
System Version 10.4.6 (8I1119)
Physical RAM 1025 MB
Model ADP2,1
Drive Type HTS726060M9AT00
CPU Test 63.00
GCD Loop 246.70 13.00 Mops/sec
Floating Point Basic 52.84 1.26 Gflop/sec
vecLib FFT 39.51 1.30 Gflop/sec
Floating Point Library 65.78 11.45 Mops/sec
Thread Test 106.37
Computation 80.74 1.64 Mops/sec, 4 threads
Lock Contention 155.82 6.70 Mlocks/sec, 4 threads
Memory Test 58.53
System 75.12
Allocate 84.16 309.06 Kalloc/sec
Fill 71.36 3469.58 MB/sec
Copy 71.22 1470.93 MB/sec
Stream 47.94
Copy 42.23 872.24 MB/sec
Scale 44.39 917.04 MB/sec
Add 53.88 1147.70 MB/sec
Triad 53.58 1146.24 MB/sec
Quartz Graphics Test 50.89
Line 41.35 2.75 Klines/sec [50% alpha]
Rectangle 40.83 12.19 Krects/sec [50% alpha]
Circle 41.39 3.37 Kcircles/sec [50% alpha]
Bezier 79.80 2.01 Kbeziers/sec [50% alpha]
Text 77.59 4.85 Kchars/sec
OpenGL Graphics Test 38.06
Spinning Squares 38.06 48.28 frames/sec
User Interface Test 21.42
Elements 21.42 98.31 refresh/sec
Disk Test 39.16
Sequential 70.62
Uncached Write 72.23 44.35 MB/sec [4K blocks]
Uncached Write 67.04 37.93 MB/sec [256K blocks]
Uncached Read 71.83 21.02 MB/sec [4K blocks]
Uncached Read 71.65 36.01 MB/sec [256K blocks]
Random 27.09
Uncached Write 9.14 0.97 MB/sec [4K blocks]
Uncached Write 70.82 22.67 MB/sec [256K blocks]
Uncached Read 75.84 0.54 MB/sec [4K blocks]
Uncached Read 91.39 16.96 MB/sec [256K blocks]
You guys put way too much emphasis on Xbench.
Its not a reliable testing method on the x86 platform - results continuously change with each run and even with reboots... Its totally NOT accurate. I stopped using it because with 10.4.3 I scored 86.something and with 10.4.6 which runs a TON faster than 10.4.3, I get like 55.something on one run and on another, I got 76.something and on the last, I got 62.something...
That's not a very good accuracy in my mind. Benchmarks should be off no more than +/- 3% between runs on the same config with the same programs running...
Its not a reliable testing method on the x86 platform - results continuously change with each run and even with reboots... Its totally NOT accurate. I stopped using it because with 10.4.3 I scored 86.something and with 10.4.6 which runs a TON faster than 10.4.3, I get like 55.something on one run and on another, I got 76.something and on the last, I got 62.something...
That's not a very good accuracy in my mind. Benchmarks should be off no more than +/- 3% between runs on the same config with the same programs running...
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.