hi all...
Retail-Install, Asus P5W DH with CPU E8500 @ standard 3.15, XFX 8800GTX 768, 4Gig OCZ Ram 800Mhz, Samsung Disk
like it
Click to view attachment

10.5.2 kalyway using 9.4 XNU kernel on AMD 6000+, 2x1gb Crucial Ballistix DDR2 800, ATI 3850 128mb, GA-MA69G-S3H
Score 140.88
Results 140.88
System Info
Xbench Version 1.3
System Version 10.5.2 (9C7010)
Physical RAM 2048 MB
Model MacPro3,1
Drive Type WDC WD5000AACS-00ZUB0
CPU Test 110.92
GCD Loop 174.84 9.22 Mops/sec
Floating Point Basic 124.48 2.96 Gflop/sec
vecLib FFT 65.44 2.16 Gflop/sec
Floating Point Library 142.30 24.78 Mops/sec
Thread Test 183.66
Computation 142.77 2.89 Mops/sec, 4 threads
Lock Contention 257.38 11.07 Mlocks/sec, 4 threads
Memory Test 146.92
System 179.79
Allocate 234.50 861.15 Kalloc/sec
Fill 195.71 9515.86 MB/sec
Copy 136.77 2824.86 MB/sec
Stream 124.22
Copy 122.93 2539.07 MB/sec
Scale 127.03 2624.46 MB/sec
Add 122.65 2612.80 MB/sec
Triad 124.34 2660.02 MB/sec
Quartz Graphics Test 144.07
Line 282.38 18.80 Klines/sec [50% alpha]
Rectangle 72.42 21.62 Krects/sec [50% alpha]
Circle 167.99 13.69 Kcircles/sec [50% alpha]
Bezier 132.53 3.34 Kbeziers/sec [50% alpha]
Text 259.25 16.22 Kchars/sec
OpenGL Graphics Test 150.45
Spinning Squares 150.45 190.86 frames/sec
User Interface Test 345.55
Elements 345.55 1.59 Krefresh/sec
Disk Test 83.76
Sequential 136.79
Uncached Write 137.62 84.49 MB/sec [4K blocks]
Uncached Write 138.15 78.17 MB/sec [256K blocks]
Uncached Read 115.28 33.74 MB/sec [4K blocks]
Uncached Read 164.96 82.91 MB/sec [256K blocks]
Random 60.36
Uncached Write 23.75 2.51 MB/sec [4K blocks]
Uncached Write 199.58 63.89 MB/sec [256K blocks]
Uncached Read 81.37 0.58 MB/sec [4K blocks]
Uncached Read 145.52 27.00 MB/sec [256K blocks]

Here are some results for a GA-P35-DS4/Q6600 system overclocked to 3.0 GHz with apparent system stability. See sig for sysconfig.

Result: 162.51 (including disk, normal user with additional crap running)

-B.

you are booting from a seagate...hmmm.....I´ve sent my seagate back, because it was unbelievable slow (only 52 in disk test,there was something wrong with the firmware) switched to a WD AAKS and the bench jumped to 105.

without disk
disk tests in Xbench are useless


Results 320.11
System Info
Xbench Version 1.3
System Version 10.5.2 (9C7010)
Physical RAM 4096 MB
Model MacPro3,1
Drive Type ST3400820AS
CPU Test 218.08
GCD Loop 377.42 19.89 Mops/sec
Floating Point Basic 183.70 4.36 Gflop/sec
vecLib FFT 152.15 5.02 Gflop/sec
Floating Point Library 272.02 47.37 Mops/sec
Thread Test 596.40
Computation 661.00 13.39 Mops/sec, 4 threads
Lock Contention 543.30 23.37 Mlocks/sec, 4 threads
Memory Test 279.63
System 314.59
Allocate 398.84 1.46 Malloc/sec
Fill 260.17 12650.13 MB/sec
Copy 313.95 6484.42 MB/sec
Stream 251.65
Copy 238.43 4924.70 MB/sec
Scale 235.11 4857.33 MB/sec
Add 268.22 5713.66 MB/sec
Triad 268.88 5752.02 MB/sec
Quartz Graphics Test 325.34
Line 254.90 16.97 Klines/sec [50% alpha]
Rectangle 345.87 103.26 Krects/sec [50% alpha]
Circle 276.80 22.56 Kcircles/sec [50% alpha]
Bezier 270.90 6.83 Kbeziers/sec [50% alpha]
Text 799.87 50.04 Kchars/sec
OpenGL Graphics Test 249.24
Spinning Squares 249.24 316.18 frames/sec
User Interface Test 549.67
Elements 549.67 2.52 Krefresh/sec


new Q9550 E0 @3 Ghz

Hi this is my first post.. thank you to all people of this great Forum for help me to create x86 OSX computer
Here the test results

Thanks everyone in the forum for all the great information that assisted me with my x86 pc especially peach-os. My score without the disk is 356.63. I am running asus p5q-e (8gigs ram) with 2.8 ghz quadcore overclocked to 3.8ghz running kalyway 10.5.2 on a single seagate 7200.11 500 gb without the jumper. My disk only score is 72 on xbench. Will soon get a velociraptor and will report back the results.

103.2 with disk test

10.5.2 kalyway
Pentium D 930 3.0 GHZ
Intel DQ965GF Mobo
2 Gigs DDR2-667 ram
80 gig WD sata HD
7200GS Nvidia Vid card

Results 243.49
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 8192 MB
Model
Drive Type WDC WD6400AAKS-00A7B0 WDC WD6400AAKS-00A7B0
CPU Test 189.96
GCD Loop 354.84 18.70 Mops/sec
Floating Point Basic 171.42 4.07 Gflop/sec
vecLib FFT 140.78 4.64 Gflop/sec
Floating Point Library 188.60 32.84 Mops/sec
Thread Test 472.76
Computation 521.37 10.56 Mops/sec, 4 threads
Lock Contention 432.45 18.60 Mlocks/sec, 4 threads
Memory Test 203.90
System 219.85
Allocate 253.50 930.92 Kalloc/sec
Fill 195.85 9522.49 MB/sec
Copy 217.64 4495.18 MB/sec
Stream 190.10
Copy 178.43 3685.38 MB/sec
Scale 177.69 3670.96 MB/sec
Add 206.36 4395.97 MB/sec
Triad 201.49 4310.32 MB/sec
Quartz Graphics Test 200.27
Line 238.57 15.88 Klines/sec [50% alpha]
Rectangle 186.85 55.79 Krects/sec [50% alpha]
Circle 298.56 24.34 Kcircles/sec [50% alpha]
Bezier 95.75 2.42 Kbeziers/sec [50% alpha]
Text 613.54 38.38 Kchars/sec
OpenGL Graphics Test 211.80
Spinning Squares 211.80 268.68 frames/sec
User Interface Test 378.41
Elements 378.41 1.74 Krefresh/sec

---------------

any feedback would be greatly appreciated as i am a total osx86 n00b

edit: guess i should post system stats:
q6600 @ 3GHz, 8800GT 512MB, 8GB RAM... guess that's it

My specs are on my signature.

The score seems kind of low. Any way to improve it?

don't perform the disk portion of the benchmark - your number w/o the disk benchmark would be similar to the one i posted above

My Xbench without disk benchmarking (which seriously kills your score)



and my full Xbench with disk benchmarking:



My Geekbench can be found at http://browse.geekbench.ca/geekbench2/view/83336

By the way.. my cpu is NOT running at 4GHz, lol. It's only clocked to 3.2Ghz... not sure why Geekbench thinks it's 4Ghz

350

Without Disk Test: 261.92
With Disk Test: 185.19

OS: Uphuck/JAS 10.5.4
Gigabyte GA-EP35-DS3L Mainboard
Sapphire ATI Radeon HD 3870 512MB GDDR4
Antec Earthwatts EA500 500W PSU
Intel Core 2 Duo E8400 Wolfdale 3.0GHZ 45nm
Corsair PC2 6400 DDR2 800 4GB
Seagate Barracuda ES.2 ST3500320NS 500G/32mb
Non-overclocked

my newbie score
spec as my siggy

Here are my benchmarks for Xbench 1.3

Results 67.48
System Info
Xbench Version 1.3
System Version 10.5.2 (9C7010)
Physical RAM 3072 MB
Model MacPro3,1
Drive Type ST3320820AS ST3320820AS
CPU Test 87.36
GCD Loop 138.27 7.29 Mops/sec
Floating Point Basic 95.22 2.26 Gflop/sec
vecLib FFT 50.57 1.67 Gflop/sec
Floating Point Library 120.79 21.03 Mops/sec
Thread Test 131.50
Computation 108.49 2.20 Mops/sec, 4 threads
Lock Contention 166.91 7.18 Mlocks/sec, 4 threads
Memory Test 66.62
System 83.13
Allocate 226.99 833.59 Kalloc/sec
Fill 84.37 4102.31 MB/sec
Copy 50.43 1041.54 MB/sec
Stream 55.59
Copy 54.30 1121.51 MB/sec
Scale 54.42 1124.22 MB/sec
Add 57.19 1218.34 MB/sec
Triad 56.56 1209.98 MB/sec
Quartz Graphics Test 67.14
Line 49.61 3.30 Klines/sec [50% alpha]
Rectangle 55.96 16.71 Krects/sec [50% alpha]
Circle 50.74 4.14 Kcircles/sec [50% alpha]
Bezier 93.84 2.37 Kbeziers/sec [50% alpha]
Text 164.48 10.29 Kchars/sec
OpenGL Graphics Test 42.41
Spinning Squares 42.41 53.80 frames/sec
User Interface Test 76.78
Elements 76.78 352.40 refresh/sec
Disk Test 55.02
Sequential 112.50
Uncached Write 80.45 49.40 MB/sec [4K blocks]
Uncached Write 129.56 73.31 MB/sec [256K blocks]
Uncached Read 113.97 33.35 MB/sec [4K blocks]
Uncached Read 150.78 75.78 MB/sec [256K blocks]
Random 36.42
Uncached Write 12.83 1.36 MB/sec [4K blocks]
Uncached Write 74.13 23.73 MB/sec [256K blocks]
Uncached Read 88.56 0.63 MB/sec [4K blocks]
Uncached Read 140.50 26.07 MB/sec [256K blocks]


** It doesn't seem even somewhat comprable to the above results but it seems to run great

AMD 64 Dual Core 4600+
3GB DDR2
320 Sata Seagate Drive
TSST Sata DVD/CD
nforce 430
Nvidia 6150LE onboard graphics card
linksys WUSB600N wireless adapter

if you think so

Well obviously this isn't going to be up to par with the Core 2 Duos and whatnot. A standard Asustek board with onboard Video and basically a stock HP a1730n system.

Do you have any tips on improving performance? It runs efficiently for me, although I've yet to try Photoshop. Finally got my native resolution issue fixed.

your results are comparing to other similar systems not really good. bit imo xbench gives sometimes strange results. most important thing is that you are satisfied with it and you are able to work with it.
the disk speed is typical for a seagate. a WD AAKS would give you a result around 80.

Pentium D 3.06 GHZ
Gigabyte GA-EP35C-DS3R.
Geforce 8600GT 1024MB
ideneb 10.5.5

Results 257.33  System Info  
  Xbench Version 1.3
  System Version 10.5.5 (9F33)
  Physical RAM 3072 MB
  Model MacBookPro4,1
  Drive Type WDC WD7500AACS-00ZJB0
 CPU Test 181.98 
  GCD Loop 313.29 16.51 Mops/sec
  Floating Point Basic 152.80 3.63 Gflop/sec
  vecLib FFT 128.41 4.24 Gflop/sec
  Floating Point Library 224.40 39.07 Mops/sec
 Thread Test 554.56 
  Computation 1057.75 21.43 Mops/sec, 4 threads
  Lock Contention 375.79 16.17 Mlocks/sec, 4 threads
 Memory Test 207.64 
  System 265.39 
  Allocate 357.62 1.31 Malloc/sec
  Fill 214.60 10434.42 MB/sec
  Copy 259.88 5367.66 MB/sec
  Stream 170.53 
  Copy 162.42 3354.69 MB/sec
  Scale 160.93 3324.69 MB/sec
  Add 181.48 3866.01 MB/sec
  Triad 179.36 3836.98 MB/sec
 Quartz Graphics Test 261.27 
  Line 207.99 13.85 Klines/sec [50% alpha]
  Rectangle 278.65 83.19 Krects/sec [50% alpha]
  Circle 223.72 18.24 Kcircles/sec [50% alpha]
  Bezier 220.53 5.56 Kbeziers/sec [50% alpha]
  Text 575.98 36.03 Kchars/sec
 OpenGL Graphics Test 196.07 
  Spinning Squares 196.07 248.72 frames/sec
 User Interface Test 439.80 
  Elements 439.80 2.02 Krefresh/sec

Results 351.84
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 4096 MB
Model MacPro3,1
Drive Type WDC WD10EACS-00ZJB0
CPU Test 244.57
GCD Loop 424.15 22.36 Mops/sec
Floating Point Basic 205.25 4.88 Gflop/sec
vecLib FFT 171.30 5.65 Gflop/sec
Floating Point Library 304.15 52.96 Mops/sec
Thread Test 844.44
Computation 1287.68 26.09 Mops/sec, 4 threads
Lock Contention 628.20 27.03 Mlocks/sec, 4 threads
Memory Test 283.67
System 321.45
Allocate 424.25 1.56 Malloc/sec
Fill 266.15 12940.86 MB/sec
Copy 310.72 6417.71 MB/sec
Stream 253.84
Copy 231.24 4776.09 MB/sec
Scale 241.26 4984.32 MB/sec
Add 270.11 5754.00 MB/sec
Triad 278.84 5965.06 MB/sec
Quartz Graphics Test 354.23
Line 280.57 18.68 Klines/sec [50% alpha]
Rectangle 377.72 112.77 Krects/sec [50% alpha]
Circle 303.85 24.77 Kcircles/sec [50% alpha]
Bezier 297.56 7.51 Kbeziers/sec [50% alpha]
Text 798.97 49.98 Kchars/sec
OpenGL Graphics Test 266.93
Spinning Squares 266.93 338.62 frames/sec
User Interface Test 593.18
Elements 593.18 2.72 Krefresh/sec

Sonica Lab w/ Efi-x
ASUS P5Q
Q9550 OC @ 3.42
4gb Ram
ATI Radeon HD 2600
1TB - OS X: 500GB Vista : 1TB Shared
OS - OSX 10.5.5 Retail and Vista

X-bench without Diskbench

Results 255.74
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 2048 MB
Model MacPro3,1
Drive Type RAID
CPU Test 188.41
GCD Loop 352.31 18.57 Mops/sec
Floating Point Basic 171.64 4.08 Gflop/sec
vecLib FFT 138.19 4.56 Gflop/sec
Floating Point Library 187.63 32.67 Mops/sec
Thread Test 403.90
Computation 535.28 10.84 Mops/sec, 4 threads
Lock Contention 324.30 13.95 Mlocks/sec, 4 threads
Memory Test 200.86
System 218.66
Allocate 221.62 813.87 Kalloc/sec
Fill 204.88 9961.92 MB/sec
Copy 231.09 4773.17 MB/sec
Stream 185.74
Copy 176.55 3646.63 MB/sec
Scale 174.31 3601.23 MB/sec
Add 196.83 4192.91 MB/sec
Triad 197.87 4232.84 MB/sec
Quartz Graphics Test 296.10
Line 230.38 15.34 Klines/sec [50% alpha]
Rectangle 311.75 93.07 Krects/sec [50% alpha]
Circle 247.38 20.16 Kcircles/sec [50% alpha]
Bezier 234.98 5.93 Kbeziers/sec [50% alpha]
Text 962.13 60.19 Kchars/sec
OpenGL Graphics Test 193.73
Spinning Squares 193.73 245.76 frames/sec
User Interface Test 462.99
Elements 462.99 2.12 Krefresh/sec


X-bench Diskbench - RAID of 3x Spinpoint F1 320GB

RAID is awsome, pretrty easy wirth the right Help!! Thanks to karaakeha1 for that GUIDE here...


Results 174.61
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 2048 MB
Model MacPro3,1
Drive Type RAID
Disk Test 174.61
Sequential 170.26
Uncached Write 465.23 285.64 MB/sec [4K blocks]
Uncached Write 478.87 270.95 MB/sec [256K blocks]
Uncached Read 56.84 16.63 MB/sec [4K blocks]
Uncached Read 601.83 302.47 MB/sec [256K blocks]
Random 179.20
Uncached Write 113.74 12.04 MB/sec [4K blocks]
Uncached Write 607.08 194.35 MB/sec [256K blocks]
Uncached Read 147.77 1.05 MB/sec [4K blocks]
Uncached Read 195.50 36.28 MB/sec [256K blocks]

Intel Pentium D 2.8GHz on Intel 945PSN board
BFG 7800GT/OC 256MB Video
1GB 667MHz Ram
iDeneb 10.5.5 installed on a 15GB partition

Results 89.16
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 1024 MB
Model MacPro3,1
Drive Type WDC WD400JD-75HKA1 WDC WD400JD-75HKA1
CPU Test 64.04
GCD Loop 82.29 4.34 Mops/sec
Floating Point Basic 72.94 1.73 Gflop/sec
vecLib FFT 37.99 1.25 Gflop/sec
Floating Point Library 97.26 16.94 Mops/sec
Thread Test 97.80
Computation 70.14 1.42 Mops/sec, 4 threads
Lock Contention 161.48 6.95 Mlocks/sec, 4 threads
Memory Test 119.70
System 119.33
Allocate 141.51 519.66 Kalloc/sec
Fill 121.40 5902.83 MB/sec
Copy 101.66 2099.80 MB/sec
Stream 120.07
Copy 115.84 2392.69 MB/sec
Scale 116.92 2415.46 MB/sec
Add 124.46 2651.37 MB/sec
Triad 123.56 2643.16 MB/sec
Quartz Graphics Test 132.85
Line 109.73 7.31 Klines/sec [50% alpha]
Rectangle 132.37 39.52 Krects/sec [50% alpha]
Circle 113.60 9.26 Kcircles/sec [50% alpha]
Bezier 114.29 2.88 Kbeziers/sec [50% alpha]
Text 292.68 18.31 Kchars/sec
OpenGL Graphics Test 112.47
Spinning Squares 112.47 142.68 frames/sec
User Interface Test 110.34
Elements 110.34 506.41 refresh/sec
Disk Test 53.11
Sequential 82.24
Uncached Write 76.47 46.95 MB/sec [4K blocks]
Uncached Write 95.17 53.84 MB/sec [256K blocks]
Uncached Read 61.29 17.94 MB/sec [4K blocks]
Uncached Read 114.50 57.54 MB/sec [256K blocks]
Random 39.21
Uncached Write 13.55 1.43 MB/sec [4K blocks]
Uncached Write 115.87 37.09 MB/sec [256K blocks]
Uncached Read 86.68 0.61 MB/sec [4K blocks]
Uncached Read 124.48 23.10 MB/sec [256K blocks]

spec :

E2160 @ 3Ghz
Biostar TP43D2-A7
Adata 2x1GB PC6400
250GB IDE SEAGATE
320GB SATA2 WDC
DVDRW LG
9600GSO 384MB (using 320MB)
iDeneb v.1 10.5.4 Vanilla

With Disk test I get 294.42.
Complete xbench with the disk test i get the below:

"Results 208.01
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 4096 MB
Model MacPro3,1
Drive Type ST3500320AS
CPU Test 214.86
GCD Loop 374.11 19.72 Mops/sec
Floating Point Basic 181.00 4.30 Gflop/sec
vecLib FFT 149.31 4.93 Gflop/sec
Floating Point Library 268.73 46.79 Mops/sec
Thread Test 455.90
Computation 641.91 13.00 Mops/sec, 4 threads
Lock Contention 353.47 15.21 Mlocks/sec, 4 threads
Memory Test 224.07
System 275.52
Allocate 435.12 1.60 Malloc/sec
Fill 225.83 10980.21 MB/sec
Copy 240.27 4962.62 MB/sec
Stream 188.81
Copy 178.24 3681.54 MB/sec
Scale 179.58 3710.13 MB/sec
Add 199.28 4245.16 MB/sec
Triad 200.48 4288.75 MB/sec
Quartz Graphics Test 311.81
Line 242.95 16.17 Klines/sec [50% alpha]
Rectangle 334.98 100.01 Krects/sec [50% alpha]
Circle 268.69 21.90 Kcircles/sec [50% alpha]
Bezier 258.89 6.53 Kbeziers/sec [50% alpha]
Text 740.84 46.34 Kchars/sec
OpenGL Graphics Test 270.00
Spinning Squares 270.00 342.51 frames/sec
User Interface Test 530.65
Elements 530.65 2.44 Krefresh/sec
Disk Test 73.82
Sequential 171.97
Uncached Write 190.31 116.85 MB/sec [4K blocks]
Uncached Write 169.33 95.80 MB/sec [256K blocks]
Uncached Read 131.84 38.58 MB/sec [4K blocks]
Uncached Read 221.52 111.33 MB/sec [256K blocks]
Random 47.00
Uncached Write 14.99 1.59 MB/sec [4K blocks]
Uncached Write 295.37 94.56 MB/sec [256K blocks]
Uncached Read 107.62 0.76 MB/sec [4K blocks]
Uncached Read 175.27 32.52 MB/sec [256K blocks]"

Nice to see it is keeping on par with some e8400 and e8500

I am running an e7300 (clocked at 3.2ghz running on stock vcore of 1.15v and idles on 38 degrees celcius with stock cooler nice and cheap), px7600gt winfast (leadtek), 4gb kingston hyperX ram, GA-P35-DS3L mobo, 3x SATA HDD (the mac HDD is a seagate 500gb).

System Info
P4 2.4G HT w/ 7600GS 256 Palit Sonic DDR3
1GB Ram and GI-8xxx Gigabyte board (planning to expand to 4GB since my present is a choker)
Operating System Type: Darwin
Operating System Release: 9.2.0
Operating System Revision: 199506
Kernel: Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_I386
Hostname: macserver.local
Boot Time: Mon Nov 24 03:03:44 2008
Virtual Memory - Load Average: { 0.34 0.27 0.45 }
Virtual Memory - Swap Usage: total = 512.00M used = 430.84M free = 81.16M
Machine Name: i386
Machine Model: MacPro3,1
CPU Count: 2
Physical CPU: 1
Max. Physical CPU: 1
Logical CPU: 2
Max. Logical CPU: 2
Active CPU: 2
CPUs Available: 2
CPU Type: 7
CPU Sub-Type: 4
Byte Order: 1234
Physical Memory: 1024 MB
Memory: 1024 MB
User Memory: 859.3789 MB
Page Size: 4 KB
Epoch: No
Alti-Vec: No
Floating Point: Yes
Bus Frequency: 800 MHz
Min. Bus Frequency: 800 MHz
Max. Bus Frequency: 800 MHz
CPU Frequency: 2410 MHz
Min. CPU Frequency: 2410 MHz
Max. CPU Frequency: 2410 MHz
Time Base Frequency: 1000 MHz
Level 1 Instruction Cache: 8 KB
Level 1 Data Cache: 12 KB
Level 2 Cache: 512 KB
Level 3 Cache: 0 KB
Cache Line Size: 64



Xbench Version (70.86) at par with G5
1.3
System Version
10.5.4 (9E17)
Physical RAM
1024 MB
Model
PC
Drive Type
Maxtor 6Y160P0 Maxtor 6Y160P0
Maxtor 6Y160P0 Maxtor 6Y160P0
CPU Test
56.49
GCD Loop
89.42
4.71 Mops/sec
Floating Point Basic
56.82
1.35 Gflop/sec
vecLib FFT
31.00
1.02 Gflop/sec
Floating Point Library
102.43
17.84 Mops/sec
Thread Test
79.63
Computation
85.77
1.74 Mops/sec, 4 threads
Lock Contention
74.31
3.20 Mlocks/sec, 4 threads
Memory Test
79.43
System
74.07
Allocate
68.32
250.88 Kalloc/sec
Fill
98.44
4786.50 MB/sec
Copy
63.66
1314.88 MB/sec
Stream
85.63
Copy
80.52
1663.21 MB/sec
Scale
80.60
1665.19 MB/sec
Add
91.32
1945.28 MB/sec
Triad
91.44
1956.15 MB/sec
Quartz Graphics Test
110.47
Line
111.15
7.40 Klines/sec [50% alpha]
Rectangle
114.49
34.18 Krects/sec [50% alpha]
Circle
125.22
10.21 Kcircles/sec [50% alpha]
Bezier
67.54
1.70 Kbeziers/sec [50% alpha]
Text
211.07
13.20 Kchars/sec
OpenGL Graphics Test
87.82
Spinning Squares
87.82
111.41 frames/sec
User Interface Test
50.65
Elements
50.65
232.43 refresh/sec
Disk Test
63.47
Sequential
80.88
Uncached Write
92.48
56.78 MB/sec [4K blocks]
Uncached Write
72.11
40.80 MB/sec [256K blocks]
Uncached Read
66.60
19.49 MB/sec [4K blocks]
Uncached Read
102.47
51.50 MB/sec [256K blocks]
Random
52.22
Uncached Write
21.98
2.33 MB/sec [4K blocks]
Uncached Write
129.20
41.36 MB/sec [256K blocks]
Uncached Read
63.65
0.45 MB/sec [4K blocks]
Uncached Read
130.72
24.26 MB/sec [256K blocks]

My score was 138.01.

No Disk, e8400 @ 3.83 Ghz, 2x1GB DDR2 1066, ATI 2600xt


Results 353.50
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 2048 MB
Model MacPro3,1
Drive Type WDC WD740GD-00FLA2
CPU Test 259.80
GCD Loop 449.28 23.68 Mops/sec
Floating Point Basic 217.91 5.18 Gflop/sec
vecLib FFT 182.12 6.01 Gflop/sec
Floating Point Library 323.58 56.35 Mops/sec
Thread Test 439.76
Computation 529.92 10.74 Mops/sec, 4 threads
Lock Contention 375.82 16.17 Mlocks/sec, 4 threads
Memory Test 299.70
System 356.01
Allocate 491.67 1.81 Malloc/sec
Fill 289.80 14090.57 MB/sec
Copy 339.90 7020.51 MB/sec
Stream 258.77
Copy 242.23 5003.08 MB/sec
Scale 250.47 5174.56 MB/sec
Add 272.00 5794.24 MB/sec
Triad 273.21 5844.53 MB/sec
Quartz Graphics Test 384.57
Line 301.71 20.09 Klines/sec [50% alpha]
Rectangle 406.81 121.45 Krects/sec [50% alpha]
Circle 325.23 26.51 Kcircles/sec [50% alpha]
Bezier 322.32 8.13 Kbeziers/sec [50% alpha]
Text 950.86 59.48 Kchars/sec
OpenGL Graphics Test 296.23
Spinning Squares 296.23 375.78 frames/sec
User Interface Test 650.51
Elements 650.51 2.99 Krefresh/sec

Gigabyte x38 DS5 chipset, Quad core 2.13, 4 gig ram

score: 162.58

370 w/o disk
261 w/disk

regards,
MAJ

E8500, 4GB DDR2-800, P5E WS Pro, Maxtor 6V300F0, 8800GTS 512
iDeneb 10.5.5, Darwin 9.5.0 Voodoo

Results 238.13
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 4096 MB
Model MacPro3,1
Drive Type Maxtor 6V300F0
CPU Test 216.13
GCD Loop 371.84 19.60 Mops/sec
Floating Point Basic 180.52 4.29 Gflop/sec
vecLib FFT 152.81 5.04 Gflop/sec
Floating Point Library 267.79 46.63 Mops/sec
Thread Test 427.31
Computation 526.58 10.67 Mops/sec, 4 threads
Lock Contention 359.54 15.47 Mlocks/sec, 4 threads
Memory Test 243.67
System 269.54
Allocate 313.50 1.15 Malloc/sec
Fill 232.67 11312.89 MB/sec
Copy 274.55 5670.75 MB/sec
Stream 222.33
Copy 205.50 4244.58 MB/sec
Scale 213.55 4411.86 MB/sec
Add 236.22 5032.03 MB/sec
Triad 237.59 5082.59 MB/sec
Quartz Graphics Test 319.12
Line 250.56 16.68 Klines/sec [50% alpha]
Rectangle 338.95 101.20 Krects/sec [50% alpha]
Circle 270.70 22.07 Kcircles/sec [50% alpha]
Bezier 265.89 6.71 Kbeziers/sec [50% alpha]
Text 786.47 49.20 Kchars/sec
OpenGL Graphics Test 226.20
Spinning Squares 226.20 286.95 frames/sec
User Interface Test 533.86
Elements 533.86 2.45 Krefresh/sec
Disk Test 112.39
Sequential 127.71
Uncached Write 138.44 85.00 MB/sec [4K blocks]
Uncached Write 139.14 78.73 MB/sec [256K blocks]
Uncached Read 99.18 29.02 MB/sec [4K blocks]
Uncached Read 146.46 73.61 MB/sec [256K blocks]
Random 100.35
Uncached Write 74.86 7.92 MB/sec [4K blocks]
Uncached Write 121.04 38.75 MB/sec [256K blocks]
Uncached Read 95.36 0.68 MB/sec [4K blocks]
Uncached Read 128.96 23.93 MB/sec [256K blocks]

dell studio 17

score 99.86

(GREAT) iDeneb 10.5.5 on a E6600 with 2gb 666 and gf7300 256

Results 159.87


is it good?

XBENCH QUADCORE iNTEL OSX86 // iAtkos v4i (10.5.5)

about my mac _

Click to view attachment


xbench results _

Click to view attachment


303Pts (i had more then 330 once but didnt save the screen, doooh)

> intel quadcore 9300 ... 2.5Ghz OC 3.33Ghz
> asus P5Q Pro board
> geforce 9800GT 512mb
> 4gig corsair xms2 ddr2

Results 210.41
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 4096 MB
Model MacPro3,1
Drive Type SAMSUNG HD502IJ
CPU Test 202.23
GCD Loop 351.86 18.55 Mops/sec
Floating Point Basic 170.83 4.06 Gflop/sec
vecLib FFT 140.15 4.62 Gflop/sec
Floating Point Library 253.23 44.10 Mops/sec
Thread Test 338.48
Computation 497.46 10.08 Mops/sec, 4 threads
Lock Contention 256.50 11.03 Mlocks/sec, 4 threads
Memory Test 233.72
System 279.79
Allocate 389.70 1.43 Malloc/sec
Fill 227.38 11055.89 MB/sec
Copy 266.07 5495.52 MB/sec
Stream 200.68
Copy 185.41 3829.65 MB/sec
Scale 193.78 4003.51 MB/sec
Add 212.25 4521.45 MB/sec
Triad 214.24 4583.21 MB/sec

Quartz Graphics Test 299.22
Line 236.51 15.75 Klines/sec [50% alpha]
Rectangle 315.92 94.32 Krects/sec [50% alpha]
Circle 252.69 20.60 Kcircles/sec [50% alpha]
Bezier 250.46 6.32 Kbeziers/sec [50% alpha]
Text 731.78 45.78 Kchars/sec

OpenGL Graphics Test 213.00
Spinning Squares 213.00 270.20 frames/sec
User Interface Test 500.13
Elements 500.13 2.30 Krefresh/sec

Disk Test 90.46
Sequential 139.28
Uncached Write 176.88 108.60 MB/sec [4K blocks]
Uncached Write 175.38 99.23 MB/sec [256K blocks]
Uncached Read 86.84 25.41 MB/sec [4K blocks]
Uncached Read 170.97 85.93 MB/sec [256K blocks]
Random 66.98
Uncached Write 26.00 2.75 MB/sec [4K blocks]
Uncached Write 204.33 65.41 MB/sec [256K blocks]
Uncached Read 97.92 0.69 MB/sec [4K blocks]
Uncached Read 162.71 30.19 MB/sec [256K blocks]


ASUS P5Q(1611 MAC OS MODDED BIOS)
KINGSTON 4 GB DDR II 800 MHZ RAM
INTEL CORE 2 DUO E8400 2 x 3 GHZ
GeFORCE 8800 GT 512 MB RAM
SAMSUNG 500 GB SATA II (with Vista and mac os x 10.5.5)

before overclock:


after overclock:



system specs are in my sig

402.25 - finally

Ok, this is my configuration:

Motherboard: EP35-DS3L
CPU: Intel Quad Q6600 2.4Ghz
Video: GeForce 8500GT 512MB (working with EFI string)
RAM: 2GB 800Mhz Kingmax
HDD: Samsung 160GB SATA2

My xbench result:



I think this score is pretty bad and windows XP work much faster than leopard.. What I need to do to increase leopard performance ? I need to increase the RAM to 4GB ?

Thanks!

what is the bench without disk? your disk seems to be pretty slow.

the xbench without HDD is 220. This is incredible, is much bigger!
Can you recommend me a fast HDD ? (I'm not interested in very expensive HDD like Raptor). Thanks!

any Western Digital of the AAKS series

ASUS A8Sc

* Système : ACPI x86 (SantaRosa)
* BIOS : American Megatrends Inc. (1024Ko - DMI, ACPI, ESCD, PnP)
* CPU : Intel Core 2 Duo T7300 @ 2.00GHz
* RAM : 4096Mb SO-DIMM (2*2048Mb)
* Hard drive : HTS722020K9SA00 - 7K200 rpm - SATA (200Go) on Intel ICH8M SATA AHCI.
* Optical : HL-DT-ST DVDRAM GSA-T20N (monté en ATA)
* GPU : nVidia Geforce 8400M G (128Mo) on PCI Express 16X (ICH8M)
* Sound : chipset Realtek HD Audio ALC660 (Intel HDA compliant)
* Touchpad : Synaptics PS/2 Touchpad
* Wifi : Intel® (Centrino) Wireless Pro WiFi 4965AGN Broadcom 4311
* Ethernet : Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC
* Bluetooth : chipset Cambridge Silicon Radio CSRbetween Bluetooth 2.0+EDR
* USB : 5*USB 2.0 sur ICH8 (dont 1*Bluetooth et +1 dédié à la webcam)
* Firewire : 1*IEEE 1394 RICOH OHCI 400Mbits/s
* Mini-PCI Express : 1*Mini-PCIe

Uncached Read 125.16 23.22 MB/sec [256K blocks]

IBM ThinkPad T41, 1.5GB Ram, NetGear WG111 wifi dongle.

All running perfectly thanks to the wealth of information on these forums. Thanks guys!!!

Q6600
4GB 800mhz DDR2
Nvidia 8800GTS
GA-965P-DS3
WD 500gb HDD

Q6600 @ 3.1GHz, GA 965P-DS3, 4GB kit 800, GF 8600GT 256MB, WDC 320GB SATA-II

Thanks for your help! The HDD is changed The new result:



I think, I need to improve the memory (probably my last upgrade)... Someone know a fast RAM with bigger result than 173.80 ?

Out of interest whilst reading through the forum I thought I would test my Mac: I think its 2 years old now .. ish or is it 3 ..

1st Gen Mac Pro: xbench Result 177.96

2 x 2.66 Dual-Core Intel Xeon
6 GB Ram
500 GB HD

Its a stock 1st Gen intel Mac Pro, basically the first release of an intel Mac. I stuffed some extra (Crucial) RAM in and upgraded the HD a little while ago. Must have helped since xbench has average for this machine at a 150 ish score.
I was itching to put a ssd in to run the OS from. Then got put off by a Mac Genius saying it wouldn't speed things up. Still not sure if I believe him.

Results 177.96
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 6144 MB
Model MacPro1,1
Drive Type WDC WD5000AAKS-00A7B0

Here are my Asus EeePC 1000h Xbench results: