Upon checking your info.plist, I did the same approach way back but still no luck on having mute on alc268. Instead I got the external mic working.

Cool!

Taka all your time what u need, is not urgent eheheh i still use USB CMI cheap headphone audio solution for my toshiba

thnx

@sonotone: Same here as collit99 no working mute...

external mic has been working as well with the "old" kext provided by collit99 and madtux!

hmmm i cannot get this to work no matter what. i manually added the kext that had autosensing fixed, but that gave me a lot of noise so i uninstalled it, afterwhich i got advised to turn down the second mic volume, but i could never reinstall it. so i reinstalled leopard, and now cannot get anything to work, that includes manual with kexthelper and osx86tools and the installer packages by eddie.

argh..... i will let you know where it fails after work so i dont get into to much {censored} for not doing what im supposed to be doing :s .

this is what i managed to pull out of the console...

Oct 22 16:49:24 localhost kextd[18]: loaded version 2.4.1 of module com.apple.iokit.IOPCIFamily differs from requested version 2.4
Oct 22 16:49:24 localhost kextd[18]: a link/load error occured for kernel extension /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAController.kext
Oct 22 16:49:24 localhost kernel[0]: HDAEnabler: Copyright © 2008 by Kabyl
Oct 22 16:49:24 localhost kextd[19]: loaded version 2.4.1 of module com.apple.iokit.IOPCIFamily differs from requested version 2.4
Oct 22 16:49:24 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SPAudio support:Taruga
Oct 22 16:49:24 localhost kextd[19]: a link/load error occured for kernel extension /System/Library/Extensions/AppleLPC.kext
Oct 22 16:49:25 localhost bootlog[43]: BOOT_TIME: 1224690560 0

hope its of use....

I remake packages, there is a BIG ERROR !i try to fix it!

ok, thanks! will be happy to test it:)

is this what is causing my issues?

i hope for my sanities sake it is, and that your updates will fix it.

Nope... mute still not working... Did anyone get the internal and external mic working WITHOUT the background noise?

For me all work!I've tried all installers and it starts script!Not sure for you!
Try!
this should backup the old AppleHDA.kext into /HDABackup and deleta Azalia, and kextcache!
try if it work!

still the same error after restart:
can't add kernel extension /System/Library/Extensions/AppleHDA.kext (not a bundle)
any ideas?
before restart i got internal in/out working but not headphones

strange thing: after typing kextunload- just to be sure i can load it again(before restarting). i got kinda logout and then logged in automatically( kind of shell restart or something)

after installing the second driver from alc268 i got kernel panic:( dump from KP attached.

Hello again MadTux, I just tried your new driver - getting better, but still no internal mic. I don't have an external one to try it. Output is definitely better - has volume control working. Here, I'm attaching to you again the newest codec dump from Ubuntu 8.04 with latest updates.



Lenovo 3000 C200 originally with Windows XP, without updating BIOS.

For now the fix is to lower down the volume of the 2nd "Internal Mic" under sound preferences.

hmm when trying to force the kext to load, kextload gives me this error:

udo kextload -t /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAController.kext
kextload: extension /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAController.kext appears to be loadable
kextload: loaded version 2.4.1 of module com.apple.iokit.IOPCIFamily differs from requested version 2.4
kextload: a link/load error occured for kernel extension /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAController.kext
link/load failed for extension /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAController.kext

any ideas how i can sort this? i looked through a couple of plists but could not find this entry?

im on vanilla 10.5 by the way..... do i need to be on a higher version?

i'm on vanilla 10.5.5 and had the same error 2 builds ago. now i have not a bundle error...

Pardon my newbieness on the subject but I have everything working except headphone output and the switching which is untestable until headphones work, but input does indeed show up.

What do I dump, and how do I do it?

Extreme thanks, this is the last bug to shake in my whole Toshiba Satellite P200-Rt2 Mac hipster killing machine.

The listing on the Codec is Alc861 but the one included with Ideneb v1.4 does nothing. Had to return to Azalia which only does speaker output and nothing so far has changed anything until I tried the alc861VD toshiba here.

I am in your debt if you can iron out this last kink.

Cheers

Here's how you prepare a codec dump... Hope this helps

---------------------------------------------------------------------------------------------------------------------------------------------------------------
How do I make a linux codec dump ? - By Metajames

OK, this is for everyone who is confused about how to get the linux codec dump. This is how I did it, you can do it other ways but basiclly you need to boot linux, cat /proc/asound/card0/codec#1 and save the output so you can feed it to the patcher on OSX.

I saved mine directly to a USB stick, make sure to make it writable by right clicking on it and selecting the option if you do that. I will describe a email method below since I think it is a bit more straightforward. If anyone has problems with these steps let me know and I can revise this post.

1) Download Knoppix Live CD Linux Distro

http://www.kernel.org/pub/dist/knoppix/KNO...07-01-04-EN.iso

2) Burn the Knoppix iso to a CD-R

3) Boot your Hackintosh from the Knoppix CD you just burned (press enter at the prompt to fully boot into gui)

4) Open a terminal session from the dock, the icon looks really similar to the OSX one, black screen with a ">"

5) Type in the following command

CODE
cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt


6) Now you have a file on your desktop called "codec_dump.txt"

7) Launch the web browser (Konqueror) and use web based email to email the file to yourself.

8) Reboot the computer and remove the Knoppix CD

sorry im not quite sure i understand.... are you saying on 10.5.5 you have this problem cured, or on 10.5.5 you now have another problem?

hey i have: not a bundle error when trying to load the applehda.kext manually by typing kextload. i'm using leopard version 10.5.5 with vanilla kernel. that's one
the second thing is when i reboot after installing the driver (alc268 version A- without headphone patch), leo can boot but no devices found. i can see the sound card in system profiler, however. and then, if i try to load manually the kext i got the "not a bundle" error.

the third case is when i try to install the second version of the driver (one with headphones patch). i'm getting any sound device after installation. and upon reboot i got kernel panic like the one attached above.
basicly everything works till reboot.

must say that it worked very good on 10.5.4:(

and all these scenarios are when you use the installer? have you tried manually placing the kexts using kexthelper or something similar?

good idea:) will give it a try later. should i extract them from the pkg or download from somewhere?

the kexts can be downloaded from the first post.

Great MadTux, this is working great with my ALC268!!! The Headphones/Internal Speakers toggle is very nice! Now, about the mic:
1. There is a very nice option available: "Use ambient noise reduction"! This allowed me to use RosettaStone for the first time!!! Thanks!
2. There is no input control option for the mic, is it always at the maximum? It seems that the mic volume when using Skype is a little low...
3. Still no toggling from Internal/External (jack) mic as in the collit99 kext, but there is no noise as that kext still does...

So, congratulations and thanks!

yup, nice to hear it worked for you, but in my case theres still kernel panics on boot in both cases(A and the pictures show whats happening when booting and the kernel panic dump shows... the kernel panic:)
as you can see on the first photo, theres many iokit errors made by applehda
on the second u can see that hdaenabler is loaded succesfully.
as always, kernel dump attached. mudtux, any ideas? maybe i'll give you my codec dump? will it help?

Can u describe exactli the steps and code u aplly.
I can't get my Dell vostro 1710 ALC268 aurio run.
I use Itakos, and everithing is ok but audio

Thanks in advance

Leo

first of all clear system from applehda, hdaenabler, alcinject. then install hdenabler and one version of the alc268 kext. at this point after few seconds i can hear cracking sound and TADA!!! sounds is on. internal speakers, internal mic works. i repair permissions and delete the kext cache just in case. reboot and TADA!!! kernel panic
for installing kext i recommend kext helper. you erase cache from /system/library/extensions.mkext repair permissions with disk utility...

Thanks a lot for the data. Sorry to ask.
How do u clear system from applehda, hdaenabler, alcinject. Just delete them from extensions folder?
What version off ALC268 did u install?
You erase cache after or before installing the ALC268 kext?

Thanks again, sorry for my short brain

it's ok:)
just delete them from /system/library/extensions folder and then delete extensions.mkext from /system/library/ you can use osx86tools application to erase the cache as well. i tried all of the versions. i erase cache after erasing the old kext and before installing new ones.

Thanks for everything but i'm lost.
Can't make audio alive!!!

I don't know what to do!

Thanks again

Madtux I having the same problem. I can not get my system to see the sound card (10.5.4) at all with this new kext. I used to use your old one as I am also on a lenovo. Anyway I see there is a new installer so Ill try that one. I hope it works otherwise ill be back with some other questions.

Thanks for all the hard work.

00D

Update: Tried the new installer. It appears its Hda enabler that wont start. I have installed it like 5 times but keeps telling me it was installed incorrectly and wont load it. Is there any solution for that?

Update: I have tried repairing permissions many times. I have also reinstalled it many times.

hey, if you have 10.5.4 try downloading alc268fix.zip its floating somewhere in this section, don't really remember the topic. i used that 10.5.4 and it worked but after upgrading to 10.5.5 i lost my audio. i thinking about reverting back to 10.5.4...

Yeah I got the HDA Fix v3.app but it has not worked yet. I am still getting that pop up saying its not installed properly. Not sure what do do now I mean it should just work ahhhh..

Any other suggestions?

Thanks

I'm under itakos v2 10.5.2
Do u know what version of AppleHDA.kext and HDAEnabler works?

If not, how can i update to 10.5.4?

Do u recommend me installing Kallyway?

Thanks!

Leo Kitay, i really don't know mate since it's just a matter of kext i think. you can update to 10.5.4 using hacked combo updaters such as kalyway 10.5.3 combo update and then delta 10.5.4 update. they are floating near bay for the pirates or really small nova

can people who have 268 working post their steps of getting it to work, and what version of leopard they are running?

For Specs see my sig.

If you use Kexthelper or OSX86Tools to install the kext do Repair Permission using Disk Utility then reboot.







Please try the kext the is on my sig...

And what alc268 kext is working on your hack before? Taruga's ALC268 Installer1, 2 or 5?

ѕӎөө, take a look at the first post... there is a ALC268.mpkg.zip available that is working very well for me! There is also the HDAEnabler.kext.zip available and the instructions to install. I recommend using OSX86Tools to install kexts and repair permissions. I'm using the Vanilla Retail DVD installation method (see my sig).

Now, when I look into my Extensions folder I see that there is a folder just below AppleHDA.kext that is called AppleHDA.taruga with a lot of things inside... I have used the Taruga's installer before and now I wonder if it's necessary to run it first to get the kexts from this topic working...

You need to remove it and the loaderHDA folder @ /Library/Startupitems

i have finally managed to get it to work for me. there must be something different about the hdaenabler in the first post, and the one collit posted a few pages back. i have done it so many times, and the only difference was using the kext from collits signature, and the kext he posted on page 4 or 5. i did it manually with kexthelper, repaired permissions, booted with -f and -v flags and viola, audio with noise. turned down the 2nd mic and bobs your uncle.

thanks for the hard work collit, madtux and taurga.

edit: i still get noise even after turning down the 2nd mic.... albeit not full volume like before but its still noticable. it does turn off after around 60 seconds of idle audio channels.

so, you mean hdaenabler from the sig and applehda from the page 4/5?

Yeah do you mean hda from his sig. I'm on 861vd but I cant get hdaenabler to load at all.

try this:
opent Terminal
login as root
go to cd /where it is/HDAEneabler.kext/Contest/MacOS/
chmod +x HDAEneabler (this makes bin file excutable)
repair permissions
reboot
it will load...

Okay I attached 2 kexts.

1. With External Mic(Hiss issue)
2. Without External Mic(No hiss issue, I hope)

Autosensing should work on both kexts.


Click to view attachment

Click to view attachment

thanks collit, that works much better for me, plus i will never use line in anyways.

HuRRaY!!!
it works!
i now have to enable 2 headphone ports and 1 external mic since it's not listed in devices tab. i have working internal speakers and internal mic. no hiss sound even with mic to full

OMFG!!!!!!!!!! it works!!!!!!!!
Hurraaay even more!!!!
the thing is the headphones isn't listed in the out deviced BUT! if i plug in them to one of the ports(both work BTW:D) leopard automaticlly switches to headphones and i can actually see headhones listed. they only appear when the cable is plugged in. the external mic isn't working but hey, my laptop has stereo mic integrated so no big deal!
thanks guys for helping. i will stick to this topic and monitor new things,
taruga, madtux, collit and smeethy you are the man!!!
the last thing is mute, when i press mute button it doesn't do much, and when i lower the volume to 0 i still can hear the sound. seems like the scale isn't right or something, any ideas?

i still have the mute issue too, but that doesnt really bother me too much, the fact i had NO sound, then really hissy sound were more important for me.

i installed alc861vd.mpkg.zip and i checked both options for install the toshiba option aswell as the other option now im getting some sort of error its says hda enabler is not installed properly and i have to install it again, so what i did was delete that file and now im getting more errors, can u tell me what to do to rollback the changes made and get back to azalia please
any help is much appreciated

when i installed alc861vd.mpkg by eddie it didnt remove my appleazaliaaudio ,
tell me what i should do to get headphone working

i had errors such as that when i used eddies installer for my audio chipset, do it manually with kexthelper, repair permissions and reboot

and don't install both of them cos it's the same drive but in 2 versions, one with headphones out one without. depends on your configuration:)

i installed both of them already, now if i want to remove the files which i installed how do i go about it, i have no clue about the files which i installed by eddies package should i just delete the files i installed and reinstall them manually? if i should delete them tell me the files i should delete

i read somewhere in this thread that we should remove alcinject aswell as hdaenabler and appleazaliaaudio but in the first post by madtux the installation procedure only tells to remove azaliaaudio can anyone confirm the files they removed prior to installation of mad tux's kext

THANK YOU