hey guys

i reasentlly got a Dell Vostro 1510 and installed OSX 10.5.4 on it. everything seems to be working fine.

specs
Intel Core 2 Duo T5670
2gb ram
Mobile Intel 965 Express Chipset........................................ ....working
Dell Wireless 1395 WLAN Mini Card(Broadcom 43xx)...................working
Realtek RTL8168C/8111C Family Eathernet...............................working
SDA 8in1 card reader...........................................................not working
Realtek ACL268...................................................................working (no volume control)
Microphone(dont know what is called).....................................not working
Keyboard..........................................................not working(using external USB)
ALPS TouchPad...................................................................not working (using external USB)
Webcam..........................................................working



The Keyboard and the Touchpad stopped working after i installed update 10.5.4. it was working under the 10.5.2 the battery meter stopped working too
Webcam works no Microphone

if any1 has been able to fix any of these problems let me know



ill be updating and giving the links to how i got it working

thanx

i got everything exept the mic to work

what did you use to get the keyboard and mouse to work?
how about the card Reader?
i hope to be able to find something for the mic
thanks

it worked of side the box adn the card reader i install pccarder 10.5.2 look at this page http://forum.insanelymac.com/index.php?showtopic=121472 bt what grafic card did you take

that's how i installed it. that is the guide i used, but once i update to the 10.5.4 the keyboard and mouse stop working. im thinking of staying under the 10.5.2 and trying to install the drivers for the wifi and other stuff. the battery meter works under 10.5.2 and gets messed up when i update to 10.5.4

Did you need a external Display ??? becouse i didn't but try chun nan keyboard drivers they work perfectly

no i did not need an external monitor every now and then i get a white screan with some lines going down.
chun nad keyboard drivers? this


ok so here is what i did.
i reinstalled 10.5.2 and the keyboard is working along with the mouse pad. how can i back up the appropriate .kext so that when i updat to 10.5.4 i wont loose the keyboard and mouse?
the ethernet is working but not the wifi. i went to the .plist and tried to add the <string> but could not find the rest of the <string> group. does the update add more strings?
Audio not working i had it working before but no volume controll
my keys above the keyboard dont work either the eject,v+,v-,play, etc.

i dont mind staying at 10.5.2 if i can get everything to work properly


thanx

backup the Extentions

/system/library/extensions
right

ok
so i backup the extensions and now how do i know what controls what?
also what determines the battery meter? when i updated to the 10.5.4 the batter went away
sorry for the double post

ok
so i backup the extensions and now how do i know what controls what?
also what determines the battery meter? when i updated to the 10.5.4 the batter went away
sorry for the double post

After update ADD your PS2 kext with Kext helper and use the Battery meter from Chan nun it should work perfectly

im thinking of just staying under the 10.5.2 for now
im going to try it and see how it runs
thanks for the help and ill get back


edit

how do i know which ones are the ones for the mouse or keyboard?
do i replace all that say "PS2" in them?
theres also other .kext that say "mouse" and another that says "keyboard" are these it too?

ok so i did that and it did not work.

so here is what i did.
i installed Kalyway 10.5.2
-Kernal_Vanilla_92
-Patches
--Hardcoded_SMBIOS
---AppleSMBIOS-27-MB
--PowerManagemet_bundle
did not update to 10.5.4 combo update
i installed the Leopard Graphics Update 1.0 using Pacifist
reboot
Installed bcm43xx_enabler_0.5.1pre for the drivers
reboot (pop up new hardware press apply or it will not work)
installed the TARUGA driver
reboot
copy the AppleHDA.kext to /System/Library/Extensions/ (dont skip this step or you wont have control of the volume)
reboot
and done.

now the only things that i need to find are:
the Eject button above the keyboard does not work
the card reader
Mic does not work it shows up as a device but cant seem to get it to work


i read that to use the "pccarder" but i cant find it. when i google this is the only site that comes up. can some one direct me to where its at?

one other thing that happens is when i restart or go back to windows i have time messedup it changes to AM from PM or the time changes completely. Has this happened to some of you guys?

thanx

Look here for bettery meter:
http://forum.insanelymac.com/index.php?showtopic=126888

i ran into another problem the caplock works, but the number lock/Scroll lock dont how can i fix this?

i havenet tied the battery meter one since i am still under the 10.5.2

thanx

so i got everything working except those Number lock/scroll

shutdown works

all on 10.4.2

going to try to update and get it all working on x.x.4

getting the problem of the windows clock which displays a different time every time i restart