Monitor:

Tipo: Monitor
Bus: PCIe
VRAM (totale): 128 MB
Fornitore: ATI (0x1002)
ID dispositivo: 0x5462
ID revisione: 0x0000
Informazioni su estensione Kernel: Nessun Kext caricato
Monitor:
Monitor:
Risoluzione: 1024 x 768
Profondità: Colore 32-bit
Core Image: Non Supportato
Monitor principale: Sì
Mirror: Spento
Online: Sì
Quartz Extreme: Non Supportato


please help me to enable Core Image and Quartz Extreme
please help me
Dati software di sistema:

Versione sistema: Mac OS X 10.4.8 (8L2127)
Versione kernel: Darwin 8.8.1

i have downgrade to 10.4.8 to enable but no work

with this I solved the problem resolution, but I
the same thing even with 10.5.2 and 10.4.11 but no QE /
CI

the graphics card is recognized but incorrectly
32MB instead of 128MB
Click to view attachment

Hello to all, with thisClick to view attachment(amended by me) have managed to see the video card and the correct amount of 128MB ram.
Unfortunately you can not change the resolution, which remains 1024x768 I get on my Amilo at least 1280x768
Help Thanks

With OS 10.5.2 is seen also
CORE IMAGE but not the Quartz Extreme

With OS 10.4.10 no CI / QE

Click to view attachment

Someone more experienced than I could help to enable CI / QE
Please Help

I have Ati Mobility x600 256M (ID 3150) but I think is similar to yours.
To have ResChange+QI+CE I used JAS 10.4.8 distribution + ATI Zorz script (a mix of callisto and koverg) launched "./doe.sh cal3 0x0x0 1 1" (this means callisto3 + koverg patch enabled). In adition, you have to change manually the Frame Buffer value form IONNDRVFramebuffer to CallistoFB inside ATIRadeon9700GA.bundle. When you upgrade from 10.4.8 to later vesion, you have to keep ATIRadeon9700.kext and ATIRadeon9700GA.bundle already patched (newer versions are not working). I'll uploade the patched kexts later.

thank kytzu for your reply,
i have downraade to Mac OS X 10.4.8 (8L2127) jas, but the proble persist
the procedure you suggested I had already used, but I thought that the problem was for the version of os, the fact is no exists extensions named ATIRadeon9700GA.bundle,
Click to view attachment
someone could post?
i have add CallistoFB in the ATIRadeon9700GA.plugin...is correct?
Click to view attachment
another thing ... when you run the script is not written in full ID card and simply write only the first 4 digits (0x54) and not 0x54621002, then or corrected manually.
are months that we try and are desperate

Click to view attachment finally we are successful, now I remember well the steps, but soon will create an installer for special x 600 SE (ID 5462)
if someone had need of ketx well ask me
Hooray

My memory is cheating me again, it is .plugin indeed
I'm glad you got it work.

PS: I'm not sure about it but I think that radeon kexts are version 10.4.6 in Jas 10.4.8 distribution and I think those are the last ones that can be patched in this way.

hello to all
unfortunately in the information appear 32MB while 128 ... this means that only works to 32?
Click to view attachment
CPU speed is now no longer get to 1.6, but it is always lower (as shown) can do anything?
Click to view attachment

this is the Click to view attachment that I created for this video card

work on os x 10.4.8 QE/CI OK
on os x 10.4.10 work first boot QE no work CI Sofware second boot black sceen
on os x 10.5.2 work only CI no QE

normaly it should work on 10.4.11 as well if you keep atiradeon9700.kext and 9700ga.plugin files from working version.

Unfortunately, when I install the same files in OS X 10.4.10 (Kaly) QE / CI do not work, I suppose that interact with other files that are not present or different in this distribution.
what is wrong?

Thanks again kytzu for your attention and patience

yeaahhh this kext work properly!!!!
1st time i have installed jas 10.4.8 with mobility support x600 kext but crashes at reboot.
don't install this package and now i have ci/qe!!!!
greatttttt

Dear friends,
if you please try this one :

http://rapidshare.com/files/149721354/ATIX...EOPARD.rar.html

only for Leopard I think 10.5.1-2-3-4 I did not try it on 10.5.5

install using kexthelper and repair permission reboot and magically
dvdplayer will work, support QE only 2D

I hope you will enjoy , yes we can do it better but this is my best effort, now it is on you

try my post


ATI X600 QE CI for LEOPARD

I think works for old ATI card