Jump to content



Member Since 01 Feb 2012
Offline Last Active Mar 02 2015 04:29 AM

Topics I've Started

Atheros 9285+ar3011 acting weirdly

04 February 2015 - 05:52 AM

Hello every I have HP DV6 6XXX series laptop with Yosemite 10.10.2 and i am using Pure GPT+Clover everything is working fine accept my BT 

i have Atheros 9285+ar3011 Combo card which acting weirdly but WiFi works fine (DSDT Patch) on mac and windows but

BT have issue in MAC ONLY


Issues of BT :-

1:-Cant switch on/off over key 

2:-Cant turn it off (i heard that is not possible without key F12 in my case)

3:-Cant Find any BT devices (Tested Symbian,Android and iOS)

4:-If i use latest (IOBluetoothFamily.kext+IOBluetoothHIDDriver.kext) then my USB 2.0 act weirdly  device automatically ejected and reconnected 


Think i have tested:-

1:-Old kext of IOUSBFamlily.kext 

2:-BTFirmwareUploader.kext (Tested version 2.4,2.6,2.7)

3:-Rehabman's Ath3kfirmware 


5:-Clover Patch 


Non of them is working with my BT device this are my Device ID's





I am uploading my Config.Plist if i need any modification then please tell me help is appreciable  

One think I have tested with Clover

In order to work my All USB port 2.0 and 3.0 i have to do the following settings on Clover

Clover=>Devices=>USB=>Selecte all (Inject+Add ClockID+FixOwnership+HighCurrent) Else only usb 3.0 works 2.0 stop working i telling this theory because my BT device is takes as a USB device see the images for better understanding 

Unable to boot Recovery HD

10 January 2015 - 06:29 PM

Hello guy i am looking for serious solution for my Recovery HD

this is my Config



HP DV6 6121TX see my Signature 




Whenever i boot from Recovery HD my LED Screen goes Off i have tested with Original Intel HD 3000 kext and with patched one also but no result was comparable 



So guys i need sires Help 


How To Fix The Boot0af Error using Clover

03 October 2014 - 08:00 AM



Clover is advance boot loader  which is totally different from Chameleon and Chimera, in fact it can emulate the EFI portion present on real macs and boot the OS from there instead of using the regular legacy BIOS approach used by Chameleon and Chimera. This highly recommended for UEFI motherboard.

One AWESOME feature of Clover is that iMessage, iCloud, FaceTime,the Mac App Store works along with Find My Mac,Back To My Mac and since Clover can use the EFI partition.It is very difficult to work Clover boot loader  on MBR partition scheme because it actually need EFI partition but the EFI partition is only visible or created if our hard drive partition scheme is GUIDE partition scheme NOT THE MBR partition scheme.

Apparently we can install Clover Boot loader on MBR partition scheme but it produce me error called Boot0abecause i am using EFI bios not the UEFI bios and Clover Boot Loader is specially made for UEFI bios,because of my EFI bios i got this error.For this error i have research a lot but there is no easy solution for MBR partition scheme,a plenty of guide need EFI partition which i don't have because of my HDD is formatted in MBR partition scheme so i figure out the simplest method to solve this error without any GUID partition scheme 

Solution for the Boot0af error
Requirement to solve the problem
1:-MAC OS X installer (USB only)
2:-boot1h file 
3:-Working Hackintosh/Mackintosh
4:-Enoch Boot Loader

Step 1 (Installing Enoch)

Install MAC OS X with Enoch boot loader which produce boot0error if you have 4k sector drive but if you don't have boot0error issue then skip the step 1 & 2
Step 2 (Fixing Boot0.. error)
:-Download the Chameleon binary folder from google and copy the boot1h file to your MAC OS X installer 
:-Restart your computer, and boot from MAC OS X installer Once the Mac OS X Installer starts, open Disk Utility by opening the "Utilities" menu in the menu bar.
:-In Disk Utility, select the hard disk partition where Mac OS X is installed from the sidebar, and unmount it.
:-Once that's done, close Disk Utility and open Terminal from the Utilities window. Open  terminal, type: 
diskutil list
Once you do type this terminal commands 
cd /Volumes/"USB Drive"
dd if=boot1h of=/dev/identifier bs=4096
Note:-Replace "USB Drive" with the name of your Mac OS X Installer
Step 3 (Install Clover)
:-Download Clover boot loader from Download
:-install in following way 
Make sure choose following option in Clover otherwise you will never get success on this error 
Install Clover in ESP
Boot Loader=>Install boot0af in MBR
Clover EFI->Clover EFI 64-bit SATA
Themes=>Select any
Once you done choosing following option then install it before restarting your System edit your config.plist as per your requirements then restart.
Source is here




MAC OS X Yosemite Beta 1,2,3 Hackintosh Guide

03 October 2014 - 07:51 AM

This Guide is tested on Yosemite Beta 1,2,3 and Golden Master version 3.0


Requirements for making USB Installer 

:-USB Flash drive at least 8 GB 
:-Install OS X Yosemite Beta.app (Download it from app store)
:-Enoch Boot loader (Enoch-rev.2390) Or Chameleon Boot Loader (r2391) 
:-Kernel (retrieve it from Pacifist Essentials.pkg /System/Library/Kernels)
:-Necessary Kext for booting OS X 
:-MBR Patch if you HDD is in MBR scheme 
Create USB Installer using Disk Utility and Terminal
1.Open Disk Utility and Format your USB Flash Drive as MBR Partition Scheme with Mac OS X Extended Journaled
2.Then Mount your 10.10 Yosemite image from /Application/Install OS X Yosemite Beta /Contents/Shared Support/InstallESD.dmg)
3.Then mount BaseSystem.dmg by using this terminal commands
    open /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg
4.Restore “OS X Base System” to your USB Flash Drive using disk utility
5.Navigate to USB drive/System/Installation & Delete the “Packages” Alias then copy the "Packages" folder from “OS X Install ESD” to this location.
6. Copy BaseSystem.chunklist and BaseSystem.dmg from InstallESD.dmg to USB
7. Install Enoch Boot Loader (Enoch-rev.2390 and higher) or Chameleon Boot Loader (r2391)on USB drive
8. Create the new folder name as "Extra" on the USB
9. Put SMBIOS in Extra folder 8.1 for Laptop support and 3.1 for Desktop support
10. Copy Following kexts to /USB/System/Library/Extensions/ on your USB stick
And delete following Kext from /USB/System/Library/Extensions/ 
11.Make a Org.Chameleon.Boot.Plist with following
Screen%2BShot%2B2014-09-27%2Bat%2B1.58.1 Screen%2BShot%2B2014-09-27%2Bat%2B1.16.4
If you are HP user like me then simply Add cpus=1 along with kext-dev-mode=1 for botting OS X to avoid Kernel Panic related to LocalACPI see the images for better understanding 
12.Create the new folder on the USB/System/Library/ name as "Kernels" and place your kernel which you retrieved it from Essential.pkg which is placed in InstallESD.dmg/Packages/ on this location USB/System/Library/Kernels/ 
13.Download MBR Patch and add the patch once done everything install the Mac OS X Yosemite 10.10 (Build 14A361p) and enjoy the new update.

Note:Do not add kext on this location /USB/Extra/Extensions/ because sometimes kext will not load if kext dose not load you never reach the Installer screen 


Source is here


OS X 10.10 Lapic Kernel

25 July 2014 - 06:42 AM

Guys Lapic Kernele is need i can't use my all core i have to use cpus=1 @Donovan6000

your kernel patcher also not work help me 





Everything is perfect Accept CPU ,It utilize more more On 10.9.4 it perfectly Fine 


i have tried this but cpu is utilize more don't know 






© 2015 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy