Jump to content

giofrida

giofrida

Member Since 17 Sep 2011
Offline Last Active Today, 04:44 PM
*****

#2103034 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 15 January 2015 - 06:32 AM

Hello to everyone. It's been a long time since I logged in the forum. Now that I've some more time I can help you.I've just seen Clover patches, maybe you're interested in the binary patterns, aren't you?Anyway, here they are:- for kext version prior 10.8.5 the app uses verteks' utility- for kext version after 10.8.5 (included) the app patches the kext with these binary patterns (the first line is the one you have to find, the second line is the one you have to replace)I divided the patches in some categories to be as clearer as possible: - General patch (for all the configurations):0F 45 C8 42 89 8C 33 F0 01 0090 90 90 42 89 8C 33 F0 01 00- Singlelink patches:- Singlelink patch 1 (for 10.8.5 - mavericks):C7 03 01 00 00 00 C7 43 20 00C7 03 00 00 00 00 C7 43 20 00- Singlelink patch 1 (for yosemite):C7 07 01 00 00 00 41 C7 47 20C7 07 00 00 00 00 41 C7 47 20- Singlelink patch 2 (for 10.8.5):B9 00 00 00 09 C7 85 60 FF FFB9 00 00 00 08 C7 85 60 FF FF- Singlelink patch 2 (for maveric...

#2051793 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 14 August 2014 - 07:19 PM

No problem  :) Using the Debug patcher this kext was patched using  SingleLink LW1 LVDS+VGA 10.10.x.   The kexts are not loading. Make sure kexts are installed correctly with Kext Utility and using correct version of OS X for the kexts. If you have OS X 10.9.4 installed then you must install QE/CI 10.9.4 kexts. Thank you. Problem found: I made the debug checkbox invisible, but I left it checked so everytime you tried to patch the framebuffer, the debug check was set to true. My bad :blush:.For now use the debug version, tomorrow I will release the patcher working. EDIT: New version online

#2047914 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 03 August 2014 - 10:56 AM

Yes Apple probably changed the framebuffer code. No problem. When I have some free time I will fix the problem and release a new version of the patcher.

#2009426 [GUIDE] HP G62 - Mac OS X Mavericks

Posted by giofrida on 02 April 2014 - 08:19 PM

 Hi. Could you please send to me Device, Vendor, SubVendor and SubDevice your  Atheros AR9285 (580101-002)? These data can be seen through DPCIManager in the tab PCI List. Download link: http://sourceforge.n...ts/dpcimanager/Thanks! =)  Sure, but it's better to do that on Windows, because I edited the IDs to get the card working on OS X (through DSDT):PCI\VEN_168C&DEV_002B&SUBSYS_3040103C&REV_01 Vendor: 168C (Atheros)Device:  002BSubsystem Device:  3040Subsystem Vendor: 103C (HP)Rev:  01 Hi all. I have HP g62 B24ER. Can anyone, who successfully disabled intel hd, see in AIDA64 what vendor and model of your notebook display. It is important for successful disabling integrated video... For example, i have display AU Optronics B156XW02 V2, and if i disable intel hd, i don't have LED backlight. Here's my report:Elemento ValoreProprietà schermo Nome schermo AU Optronics B156XW02 V2ID monitor AUO22ECProduttore AUOMode...

#1990492 [GUIDE] HP G62 - Mac OS X Mavericks

Posted by giofrida on 01 February 2014 - 05:30 PM

AppleHDA Spoiler You have two solutions: 1. Follow this useful guide and patch AppleHDA yourself. -- or -- 2. Download and install one of these pre-patched AppleHDA. -- in progress -- How to edit CodecCommander [fix audio after sleep] -- in progress --

#1990132 [GUIDE] HP G62 - Mac OS X Mavericks

Posted by giofrida on 31 January 2014 - 10:33 AM

How to patch ATI connectors  Spoiler  1. First of all, extract your video bios. You'll need AIDA64 for Windows.2. Open it and right click on the menu bar (at bottom).3. Click on Video Debug => Video BIOS Dump and save the BIOS somewhere.4. Download redsock_bios_decoder and radeon_bios_decode.5. Open Terminal and drag redsock_bios_decoder and drop it in the window. Then type '<' and drag vgabios.dmp and drop in it too.6. Press Enter.  7. Copy the generated output in a plain text editor (such as Textedit, Sublime Text, etc.)8. Do the same thing with radeon_bios_decode.  9. You should get something like this:  10. Now copy this text:Connector Type 00 00 00 00ATY,ControlFlags 00 00 00 00Features 00 00Unknown 00 00Transmitter 00Encoder 00Hotplug ID 00Sense ID 00in the text editor three times (for LVDS, HDMI and VGA). 11. Connectors editing: LVDS: These are the values for LVDS:Connector Type 02...

#1989967 [GUIDE] HP G62 - Mac OS X Mavericks

Posted by giofrida on 30 January 2014 - 01:26 PM

How to replace your current incompatible WLAN card with an Atheros AR9285   Spoiler 1. Buy an HP AR9285 card. According to the "Compaq Presario CQ62 Notebook PC HP G62 Notebook PC Maintenance and Service Guide" these are the code parts for the AR9285.I personally bought the "580101-002" because I don't live in America.  Note: I suggest you to search the code part on a estore online (such as ebay, for example). 2. Once it arrived, let's install it. Put your notebook upside down.  3. Remove the HDD cover by loosing the screws.   4. Loose the Memory cover screws.   5. Remove the battery.  6. Lift up the Memory cover.   6. Disconnect the WLAN antennas.  7. Remove the WLAN screw.  8. Remove the WLAN module.  This is the AR9285 card I've bought:   9. Insert the new WLAN module in the Mini PCIe Slot  10. Tighten the screw.  11. Connect the...

#1989781 [GUIDE] HP G62 - Mac OS X Mavericks

Posted by giofrida on 29 January 2014 - 06:19 PM

How to disable integrated Intel HD Graphics  Spoiler  WARNING: I take no responsibility if anything goes wrong!Tested Notebooks: B13SLB21ERB23ERB29SLB51SEB73SRB90EQB90SP Following this guide you will be able to disable Intel HD Graphics. I highly recommend to do this.You can install Windows 8(.1) without any modded drivers! Just the official ones!  :thumbsup_anim:And you can have Full QE/CI on Mac OS X. 1. Make sure you have the discrete graphics card (ATI Radeon HD 5470M).2. Prepare a FreeDOS bootable USB Flash Drive using Rufus.  3. Download HPBFO100.EXE and put it in your bootable USB Flash Drive with FreeDOS.  4. Boot in your USB Flash Drive.5. Type "HPBFO100.EXE".  6. Press 'S' to save the file.  7. Then, hit 'Enter'.  8. Now, boot in Windows / Mac OS X / Linux (whatever you want) and open EEPROM.dat with a plain text editor.  9. Change the value next to...

#1988830 [GUIDE] HP G62 - Mac OS X Mavericks

Posted by giofrida on 26 January 2014 - 02:28 PM

HP G62 Notebook PC - Mac OS X Mavericks Specifications:CPU: Intel Core i3 - i5 - i7 (Arrandale)GPU (Intel only or both):Intel HD Graphics [0046:8086]ATI Radeon HD 5470M (512M/1G) [68e0:1002]WLAN (one of these):Broadcom BCM4313 [4727:14e4]Intel WiFi Link 5100 [4232:8086]Realtek RTL8191SE [8171/8172:10ec]Ralink RT3090BC4 [3090:1814]Atheros AR9285 [002b:168c]LAN: Realtek RTL8101E/8102E [8136:10ec]Audio: Realtek ALC270 [0270:10ec]TouchPad: Synaptics LuxPad v7.4Webcam: HP Webcam-101 [0149:5986]Card Reader: Realtek RTS5159 What works:CPU: Natively supported by OS X after Lapic patchGPU:Intel HD Graphics: Full QE/CI, brightness, but with laggy interface and overheat problems. VGA and HDMI doesn't work.ATI Radeon HD 5470M: Full QE/CI, brightness, VGA and HDMI doesn't work (yet)WLAN: Atheros AR9285: works almost native with AirDrop and AirPort supportLAN: Realtek 8101E/8102E: worksAudio: Realtek ALC270: works, with Speakers, Headphones, Internal and External MicrophonesTo...

#1986560 [HP G62] Failed to locate SMC driver

Posted by giofrida on 19 January 2014 - 09:18 AM

Ciao. Ti dico subito che il mio sito è veramente vecchio e necessita di essere aggiornato. Comunque sia, il problema che hai è legato a FakeSMC.kext. Prova ad avviare con -v -f (così facendo carichi i kext non dalla cache, ma direttamente dal disco).Qui dopo puoi scaricare la nuova versione di FakeSMC (da kozlek): (disinstalla FakeSMC, RadeonX e IntelCPUMonitor prima di installare questa versione)https://github.com/k...ensors/releases Per il touchpad, ti consiglio la versione di RehabMan che include la disattivazione tramite angolo superiore sinistro con led:https://code.google..../downloads/list Per la Intel HD Graphics, quando sei arrivato sulla scrivania tramite il kext che ho messo sul sito, puoi patchare la nuova versione del kext con il mio patcher:http://www.insanelym...aphics-patcher/ Ho usato i parametri LVDS+VGA (anche se quest'ultima non funziona) - Linkwidth X1 - Singlelink (no duallink) Inoltre il modulo KernelPatcher è aggiornabile tramite l'install...

#1980997 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 02 January 2014 - 08:35 AM

One idea I've been debating on figuring out how to achieve for some time is patching the framebuffer for our first-generation Intel HD Graphics on-the-fly.  Certain bootloaders, like Clover and XPC, support this.  The added benefit of this is that as long as the framebuffer patches remain the same (I assume this only applies to updates, like from 10.9 to 10.9.1, rather than upgrades, like from 10.8.5 to 10.9), we won't have to re-patch or roll back older kexts.  The patch will happen seamlessly by the bootloader. The patches work by find and replace as opposed to offsets, so I assume that such an endeavor will require Mavericks.  I know giofrida posted some patches a while back in this thread (back when it was still in DP), but I don't think those patches worked.  Giofrida, could you could send me the patches you currently use for your patching app for me to test?  Thanks in advanced!! P.S. - If anyone could pass along a hex difference in the...

#1951382 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 06 October 2013 - 01:40 PM

Hi guysI updated the patcher. Now it says in the output if there's an error with a patch. Could someone please upload Mavericks DP8 kexts? Thanks!

#1946466 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 17 September 2013 - 05:32 PM

I'm sorry to say that it still doesn't work in Mavericks DP7.There's no output, just a blank screen. But Framebuffer from 10.8.5 works well.Hi. Please try this version. Try both Mode 1 and Mode 2 patches.Thanks Attached Files  Intel HD Graphics Patcher.zip 791.67KB 37 downloads

#1923580 [GUIDE] 1st Generation Intel HD Graphics QE/CI

Posted by giofrida on 13 June 2013 - 09:07 AM

I found all the hex edits.Download the document. The first hex line is the line you have to find and the second one is the line you have to replace.The string: B9 00 00 00 09 C7 85 60 FF FF doesn't exist in 10.9 FB. There are other similar ones. I don't know if it's important or not. Attached Files  HD PATCHES.rtf 4.07KB 18 downloads

#1921600 OS X Mountain Lion - ASUS P8H67-M Pro (B3) Installation Guide

Posted by giofrida on 11 June 2013 - 04:47 PM

Hi giofrida, Will try add a score this week for Geekbench. I edited CPUPM with the MacbookPro8,3 data to get more P-states. This patch is not compatible with the newest BIOS, that is why I use their patch for newer BIOS as base. Thanks for the USB3.0 tip! I don't have any USB3.0 device yet, but it would be nice to have more USB-ports. :) Thanks. Just tried editing the kext. It "unlocks" at least 3-4 more p-states. Maybe I'll try doing the same thing with our laptop because I only get 924MHz and 2260MHz.

© 2015 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy