Jump to content

Leon Hong

Leon Hong

Member Since 15 Sep 2011
Offline Last Active Jun 08 2016 12:15 PM
-----

#2176256 [GUIDE] Samsung Ativ Smart Pro XE700T1C 10.10.x and 10.11.0 [100%]

Posted by Leon Hong on 11 October 2015 - 02:08 AM

@edwinvarelas: Great !! You did it !!!   :thumbsup_anim:  :thumbsup_anim:  :thumbsup_anim: Yet I will wait for the coming WACOM drivers.   :) BTW, I have changed the eraser tip to right-click successfully:on run tell application "TabletDriver" set screenNumber to 0 set tabletNumber to 0 set transducerNumber to 0 set BTNFUNC to button function of button 4 of transducer transducerNumber of tablet tabletNumber if BTNFUNC is equal to auto erase then set button function of button 2 of transducer transducerNumber of tablet tabletNumber to pan set button function of button 3 of transducer transducerNumber of tablet tabletNumber to double click set button function of button 4 of transducer transducerNumber of tablet tabletNumber to right click else set button function of button 2 of transducer transducerNumber of tablet tabletNumber to right click set button function of button 3 of transducer transducerNumber of tablet tabletNumber to doubl...

#2173507 [GUIDE] Samsung Ativ Smart Pro XE700T1C 10.10.x and 10.11.0 [100%]

Posted by Leon Hong on 05 October 2015 - 08:29 AM

My ATIV is XE700T1C-A02US, which is listed on the SAMSUNG official website, so it should be quite "typical" "standard" in specs including on-board devices and firmware, I guess.  However, I can't get the backlight to work like others do at first...  The RehabMan patch of IGPU seemed not accessible with MaciASL in recent days, so I have to add PNLF and LCD1234 manually by myself. After my twitches, the DSDT works successfully to get the backlight adjustable, the battery and the USB3 seemed working perfectly, but the ATIV failed to sleep... I tried lots of solutions to make it sleep, and all of them failed. The only one working is from here: http://www.insanelym...-1?hl= xe700t1c Thank you mactabletman, your DSDT works great in sleep !! But this DSDT gives no backlight. I had tried everything to make it work, yet there is no backlight available. Then I start to compare the 2 DSDTs of my original and this one from mactabletman for...

#2172650 [GUIDE] Samsung Ativ Smart Pro XE700T1C 10.10.x and 10.11.0 [100%]

Posted by Leon Hong on 03 October 2015 - 12:38 PM

Finally get the stylus pen to work in absolute mode with portrait orientation!!  :D Turn the screen with fb-rotate or manual-setting to 90 degrees, and run following script:on run repeat until application "TabletDriver" is running delay 1 end repeat tell application "TabletDriver" set tabletNumber to 0 set transducerNumber to 0 set positioning mode of transducer transducerNumber of tablet tabletNumber to absolute set SCRAREA to screen area of transducer transducerNumber of tablet tabletNumber as list if item 3 of SCRAREA = 1920 then set tablet area of transducer transducerNumber of tablet tabletNumber to {0, 0, 28518, 17468} as list end if if item 3 of SCRAREA = 1080 then set tablet area of transducer transducerNumber of tablet tabletNumber to {3580, 160, 17800, 25500} as list end if end tell end runOnly 0 and 90 degrees orientations is coded in this script, no 180/270 degrees orientations because I don't need them. :P  I export the sc...

#2171729 [GUIDE] Samsung Ativ Smart Pro XE700T1C 10.10.x and 10.11.0 [100%]

Posted by Leon Hong on 01 October 2015 - 11:51 AM

@duduclx: I had tried to upgrade to 10.11 this afternoon. I can boot to desktop successfully, but regret immediately because the pen-tablet drivers refuse to work !!  :(  What is more, the CPU frequency seemed failed with 10.11. I can see it ticking only around 800+ MHz, never more than 900   :(  :(  :(  Sleep is quite normal, memory leak is even lesser than 10.10, but I lose my hand-writing ability and that is what I really need. Before the new pen-tablet driver become available, I shall stick to 10.10 for a better support  :lol:  :lol:  :lol: 

#2171075 [GUIDE] Samsung Ativ Smart Pro XE700T1C 10.10.x and 10.11.0 [100%]

Posted by Leon Hong on 29 September 2015 - 03:05 AM

@duduclx: Because lots of people really need to work in portrait orientations, somebody from Modbookish had written a dedicated app for the screen rotations: http://modbookish.le...X/#.VgnnWbTH66g Once the app executed from the terminal, it would change the screen orientations permanently even if the system is rebooted. Just run it again with adequate parameters from the terminal to bring the screen orientations back. Besides, the system preferences panel had a hidden feature to allow anybody adjusting the screen orientations in a somehow-odd way: open system preferences panel (close and reopen it again if already opened), press and hold "option/alt" + "cmd" keys simutaneously, then left click "Display" property with the cursor. In the Display property panel a new pull-down button labeled "Rotation: Standard" will show up, click it to pull down the menu and choose the screen orientations from inside.  :)

#2169835 [GUIDE] Samsung Ativ Smart Pro XE700T1C 10.10.x and 10.11.0 [100%]

Posted by Leon Hong on 23 September 2015 - 01:34 PM

Thanks again duduclx!! I'll try the post-install part after my job to fix the backlight problems  :thumbsup_anim:  :thumbsup_anim:  :thumbsup_anim:

#1780878 Editing Custom Connector info for Intel HD Graphics? (Gma5700, Arrandale, OSX...

Posted by Leon Hong on 24 December 2011 - 03:33 AM

If something world needs is definitely more clueless testers. How helpful can you be by testing something you have no idea how it works? Zero. You are posting to these threads for so long that you could have learn a lot since start but seems it's much more comfortable to wait for someone else to do real work. And no, this is not personal - it goes for all "I will test it guys". If someone can code/change the kext -> he/she most definitely can test it. Done that - you can take a look at my github account. It won't work. Remapping BIOS space is not so trivial as on pre-i3/i5/i7 processors. Asked at Intel forum - got zero answers/help. There is no connector info in Framebuffer kext for this videocard. I have no idea what this means. There is a big key on the bottom of your keyboard. It is called "space key" - it separates words with invisible delimiter making them easier to read. Yes dear oki270. All your words are so correct that none of the 5700...
© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy