Jump to content



Member Since 20 Aug 2005
Offline Last Active Oct 25 2016 08:54 AM

#2194927 Ozmosis

Posted by HBP112358 on 08 December 2015 - 03:16 AM

ok, so when I update my OZ to 1669M a oddball thing happens. I lose the ability to boot from windows and Clover( my backup boot loader ) should OZ take a Dive.  what settings am I missing?  all the other settings seem Great and stable on my system in my Sig. HBP

#2170398 Ozmosis

Posted by HBP112358 on 26 September 2015 - 08:06 AM

No official, they are still in testing phase and it is really stable ;) But it should pop in the next 4-10 days I would think, after the Official release of El Cap happens.  HBP

#2169916 Ozmosis

Posted by HBP112358 on 23 September 2015 - 08:51 PM

for my yes, with a caveat, must have a valid MLB with your ethernet0 MAC address as your ROM.  At least for me that was the case as listed here. Good luck.  HBP on a side note, i have tried and can confirm, all version of Oz, from 894m up to the current builds will boot El Capitan.  HBP

#2169765 Pattern of MLB (Main Logic Board)

Posted by HBP112358 on 23 September 2015 - 03:49 AM

having struggled with resolving the call Apple issue again with El capitan having used my macbook's Rom and MLB for Yosemite I found this floating on Reddit.  hope it helps the folks having issues...  https://gist.github....b46b14061d4c995 I have used it to gen MLB's for 3 hacks that have passed muster without needing to call, write or beg Apple to remember that we exist. HBP

#2167253 El Capitan GM won't install.

Posted by HBP112358 on 12 September 2015 - 09:12 AM

you need to set your boot flags to allow unsigned kexts... a few ways to do it, (rootless=0) or search around the forums for the others. I use Ozmosis so I write directly to the nvram and am unfamiliar with the command line's of the other boot loaders. HBP the BeachBall of Death means your FakeSMC or other EMU (smc emulator) is not loaded...

#2069880 Problem booting after install

Posted by HBP112358 on 15 October 2014 - 11:06 PM

the name on the bottom left is your computer name, if you want it changed, go to sharing in system settings and change it there. HBP

#2069273 Ozmosis

Posted by HBP112358 on 14 October 2014 - 09:27 AM

 I removed both the DSDT and SSDT, but still restart when plug in any USB stick or external HDD and the USB ports.  May be it. But when I did not use this flag, I had only two energy states. Now with the flag "-xcpm" I have four states. And I never had this problem with the USB connections CloverEFI.  I do not even know how to solve this problem.  I'll have to go back even with my origial BIOS.   Thanks for your effort and nice work with my BIOS, Pavo. Thanks. @ Jorge, I read your KP and crash logs. what is KPing your system is the kext for the sensors kext in the bios. keep them in the OZ dir of the EFI partition and not hardcoded, or better yet, installed directly in /S/L/E. 1479 is unstable on some boards, and adding sensors to the bios adds to that problem. an alternative is to go back a revision to 894m. which is very stable and has fewer problems (it also has fewer graphics injectors). food for thought. HBP 

#2067139 Ozmosis

Posted by HBP112358 on 07 October 2014 - 04:24 PM

Thank you HBP112358 My question it's' about AAPL injecting, i have a cpu with intel graphics 4400,so, reading default.plist i saw a specific nvram key to inject rigth AAPL code, my mind ask: it's' possible put AAPL into ozmosisdefault?  maybe yes, i have to do some experiment, maybe in the week-end :D now i'm play with xendesktop  :wallbash:if the setting exists in the defaults.plist, it can be put in the OzmosisDefaults.ffs in fact, if you read closer, for 1479 they populate all of those settings with a default in the OzmosisDefaults.ffs  the biggest reason to have the defaults file is for configuration testing before you burn your configuration to your EFI-bios. just my opinion.  HBP

#2066993 Ozmosis

Posted by HBP112358 on 06 October 2014 - 11:28 PM

Hi folks, maybe a dumb question, can i put some data from default.plist into ozmosisdefault.plist ? if i know i compile a default.plist with some data that overwrite data presente in ozmosisdefault, the last win.Welcome and thank you for a great question.  if you follow the instructions in post #2106 of this thread you don't need a defaults.plist or writable nvram. I have tried it on 4 boards as well as having others try it, this method works with both 894M and the 1479 ozmosis and probably the earlier versions just I haven't tested with them. HBP

#2058899 Ozmosis

Posted by HBP112358 on 08 September 2014 - 05:21 PM

How can i add it to ozmosis defaults as a bootflag? just with nvram? Or can i edit the files?on page 3 of this thread is the nvram settings and what they do... if you can reach it by remote you can reach it to change nvram settings, also, you should be thinking/looking at modifying the nvram from single user command prompt mode, if your worried about doing it remotely. HBP

#2056346 Fusion Drive [how to]

Posted by HBP112358 on 29 August 2014 - 03:55 AM

I believe almost everyone who is out there playing with this has not been actually using a Fusion drive...after refollowing the steps from the before mentioned guide, I got to the part of making a LVG, but I named it 'FUSION' without the ' marks, then I went into disk utility (the Graphical interface) and did a repair disk on it, it asked it I wanted to restore a working Fusion Drive. I clicked yes.  and now I have a Fully working Fusion Drive. BEFORE:diskutil corestorage info FFC095BF-FB5E-4324-B598-DA80CA7AB4B0 Core Storage Properties: Role: Logical Volume Group (LVG) UUID: FFC095BF-FB5E-4324-B598-DA80CA7AB4B0 LVG Name: fusion LVG Version: 1 LVG Size: 1238926282752 B LVG Free Space: 0 B LVG Status: Online LVG Sparse: No Fusion Drive: NoAFTER:diskutil cs info 6F050F63-F87A-4690-AED4-7274C27DAC09 Core Storage Properties: Role: Logical Volume Group (LVG) UUID: 6F050F63-F87A-4690-AED4-7274C27DAC09 LVG Name: FUSION LVG Version: 1 LVG Size: 1249576288256 B LVG Free Space: 5734...

#2055633 Continuity

Posted by HBP112358 on 26 August 2014 - 08:13 PM

yes you Can patch DSDT with Ozmosis, its just in a different spot then clovers, it's in the EFI/EFI/Quo/Acpi/Load HBP

#2055109 Imessage and facetime Public Beta 2

Posted by HBP112358 on 25 August 2014 - 03:29 AM

if your looking for a resolution, there is a very FAST one. under general in system Preferences uncheck 'Allow Handoff between this Mac and your iCloud devices' then sign in (if you have not Fragged your account to the point of needing a level 2 unlock, AKA the 12 digit code) this will allow you to log back in. after logging back into iMessages and FaceTime you can go back and re-enable the Handoff ability.  if it kicks again, just repeat the steps. having duel booted from mavericks and Yosemite and talking with Level 2 rep about what was causing the lockout, he suspected that the new framework authentication tokens were jamming the (ANTISPAM) part of the server as it was happening with legit macs as well as hacks if interested, here is the logs for the new service as it is trying to authenticate you.8/24/14 8:11:00.053 PM lsuseractivityd[376]: PICKING: <__NSConcreteUUID 0x7fd3bbc130a0> F66AABD3-CC1F-428C-9E94-85BADF1AE16C com.apple.Messages/a32a9f48308fdcas th...

#2055024 USB Port Problem

Posted by HBP112358 on 24 August 2014 - 08:56 PM

try this... and see if it resolves the issue, it's the usb (booster/legacy kext) that enable the usb fixed for usb2/3 cards.  HBP Attached Files  GenericUSBXHCI.kext.zip 65.02KB 116 downloads

#2053532 Ozmosis

Posted by HBP112358 on 20 August 2014 - 04:18 AM

with a little German, you can have your pre-moded Bios done for you and only need to update the System Serial and Processor Serial @ least for GigaByte Boards. Ozmosis UEFI Firmware Databank from Hackintosh-Forum.de btw, the code on the first post about how to change Serials was invaluable. Thank you all HBP

© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy