Jump to content

ctugt

ctugt

Member Since 07 Nov 2010
Offline Last Active Jun 21 2014 11:37 PM
-----

#2023891 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 02 June 2014 - 11:38 AM

Great guide by the way, just about got this all working on my Dell l702x... Main issue I have had that has caused me to start over a few times is making any changes whatsoever to the partitions once you have everything installed and working seems to really screw things up... anyway on my third try now and looking good! So I'd really like to do a backup...i see you mention macrium reflect just wondering if you could give a bit more info on that process... I want to create an image of the whole disk first of all and then create a clone disk I can swap out which will hopefully just boot... Is the free version OK for this and can I do it from Windows or do I need to do it from the Macrium recovery disk... In which case should I make the Windows PE disk or the Linux one? Sorry if these are basic questions just this has taken me days to get right and I really want to make sure I make a backup that will actually work! ;)Hi, free version is ok, boot from usb is better not in windows,...

#1987212 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 21 January 2014 - 02:16 PM

 Hi:I followed your excellent guide for a desktop.Unfortunately Kali does not appear when I start the computer.I send my config.plist. https://www.mediafir...ys75nhafd2ds543 Would you please tell me what I’m doing wrong? Thanks in advance.  try this file i uploaded for you http://www.filedropper.com/config_9 and post results

#1972890 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 01 December 2013 - 06:40 PM

 Once again, thank you!You can add windows to clover ;)

#1972659 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 30 November 2013 - 07:48 PM

Nice guide! Thank you! However, my Windows Install USB will not recognize that I partitioned my disk as GPT in the OS X Installer. Diskpart says that it cannot create EFI/MSR partitions on a non-GPT. I tried "convert gpt" but it says the disk is neither GPT nor MBR. Also, I cannot mount the EFI partition created by OS X. Diskpart says that it is not a volume. Any ideas?Yes, you proberly didnt format the disk to gpt, best way to convert it the right way is to use the windows installer disk, hit SHIFT + F12, be aware with this method it clean the hole hdd so you need to install everything againtype diskpartlist diskselect disk 0 (or own disk number)clean then use disk utility provided in the osx installer, follow the guide, good luck i will add this to the the preperations post thanks

#1970260 [Theme] Mavs - Simple & Light

Posted by ctugt on 21 November 2013 - 10:54 AM

This theme is original form Enzo:  He build it for the chameleon boot loaders.http://forum.voodoop...ncecthleffp942d I liked it so much that i asked his permission to convert it to a Clover theme.So glad he told me i can. Shout out for Enzo! Attached Files  mavs.zip 1.2MB 50 downloads

#1968838 Installation guide with Clover?

Posted by ctugt on 17 November 2013 - 02:11 AM

http://www.insanelym...li-acer-s3-391/

#1968818 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 17 November 2013 - 12:58 AM

Fix Clover bootloader to dual boot OS X Mavericks / Windows 8.1 from ssd/hdd  After you installed windows you should notice that you can only boot windows 8. Thats normal for now.Boot from the OS X Clover usb again. (If you cant boot from usb and it goes to windows automaticly, just reset youre pc, as soon as it shows bios loading, reset it again, and then select usb as boot device) Select youre os x partition, hit spacebar, and choose with injected kext. Mount the main EFI with Clover configurator; Open the main EFI file drive on the desktop, browse to EFI/Clover and copy CLOVERX64.efi  to /EFI/Mircosoft/Boot. In EFI/Microsoft/Boot rename the file bootmgrfw.efi to bootmgfw-orig.efi In EFI/Microsoft/Boot rename the file CLOVERX64.EFI to bootmgfw.efi Reboot without the Clover USB Clover entrie for Windows Now you should have a working Dual boot OS X Mavericks and Windows 8.1 from the interal Clover EFI partition.

#1966897 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 12 November 2013 - 06:54 AM

Create OS X Mavericks / Windows / Kali Linux installer usb's  OS X USB InstallerGo to a real or virtual OS X. Run the app Diskmaker X to create an installer usb (it automaticly formats the usb to gpt with journaled partitions). Windows-only users please use bdutility.exe and skip step #2 and #3. (I never tried those methods); Open terminal, use the command: diskutil list and look for the name OS X 10.9 Install Di.... in my case its /dev/disk1, take note of you're usb disk id; Install and run the Clover Configurator app and go to Extra --> Mount EFI --> select the usb disk from you're note in the previous step. You should now see the usb's EFI volume in the Finder app; Copy the EFI folder located in my Acer_Aspire_ S3_391_OSX_EFI_Clover.zip  to the root of the usb installer EFI volume.Windows USB InstallerYou can only use a x64 dvd/iso, combined x32-x64 versions won't work.Format your USB-drive to FAT32 using Disk Utility or Windows Disk Management. (MBR or G...

#1964284 Permanently Banned From Tonymacx86

Posted by ctugt on 06 November 2013 - 12:40 AM

i think im getting banned today :D Attached Thumbnails

#1964271 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 05 November 2013 - 11:56 PM

Preperations for other systems then the Acer S3-391 (skip if you have the same notebook as post #2) No, if you don't have the Acer S3-391 then don't use my specific system files, but instead, you need to have a working clover OS X installed and backup these files.Custom kernal extentions;DSDT.aml;/EFI/CLOVER/config.plist; /EFI/CLOVER/driver64UEFI/ all *.efi filesExtract my uploaded Acer_Aspire_ S3_391_OSX_EFI_Clover.zip and replace neccersairly files with you're own working files.Replace /EFI/CLOVER/ahci/patched/dsdt.aml with you're OWN; Replace /EFI/CLOVER/config.plist with you're OWN; Remove kext from /EFI/CLOVER/kext/10.9 and put you're OWN kext here; Remove *.efi files from /EFI/CLOVER/driver64EFUI and put you're OWN *.efi files here;After this is done, everytime i tell you to use my files from Acer_Aspire_ S3_391_OSX_EFI_Clover.zip, Use this extracted/modified folder you just made yourself.

#1964126 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 05 November 2013 - 07:47 PM

Acer Aspire S3-391 SpecifcationsIntel Core i3 3217U with HD4000Intel Mobile HM77Realtek ALC269 @ Intel Panther Point PCH - High Definition Audio Controlle1366x768 (WXGA Wide)Replaced the 500GB HDD with a Samsung 250GB SSDRemoved the 20GB SSD, (Continue reading why to remove)Still working in progess in OS XSleep function, it only works running on batteriesThe brightness key fn+arrow keysContinue reading for wifi informationAppstore and iMessage will not work cause this notebook has no LANThere are two kind of setups with different daughterboards for this notebook (the daughterboard on the Acer s3-391 is a extra board next to the maiboard for controlling msata and/or wifi).Setup 1. Daughterboard with mini-pcie (with mini pci-e wifi card).Setup 2. Daughterboard with MSATA and soldered shared Atheros wifi+bluetooth     As OS X doesn't support the soldered Atheros wifi you have two options:Option 1. You can buy the from setup 1 online and swap them, i'm still figuring out...

#1963811 Beginners guide to UEFI Triple/Dual boot OS X, Windows and Linux (Kali) on an...

Posted by ctugt on 05 November 2013 - 08:20 AM

Copyright © ctugt 2013 - end of time  :welcomeani:  If you applying this guide to a Acer S3-391 start at post #2. For other systems start at post #3. This guide should work on OS X Mavericks, (im not sure about Mountain Lion), Windows 7 / 8 / 8.1 and Linux Distros with EFI support Attention:Before executing anything READ the full posts first! This will prevent any unnecessarily mistakes and questions.Disconnect all other ssd/hdd/usb drives, just to be sure you don't mess it up! Keep it disconnected until you're done with everything!  Good Luck :thumbsup_anim:  IndexPost #02 - Acer Aspire S3-391 SpecifcationsPost #03 - Preperations for other systems then the Acer S3-391Post #04 - Create OS X Mavericks / Windows installer usb'sPost #05 - Installing Mac OS X Mavericks EUFI modePost #06 - Installing Windows 8.1 UEFI ModePost #07 - Fix Clover bootloader to dual boot OS X Mavericks / Windows 8.1 from ssd/hddPost #08 - Installing Linux/Kali UEFI ModePost #09 - Fi...

#1959547 Intel HD3000 QE/CI

Posted by ctugt on 27 October 2013 - 11:15 PM

im debugging it with Dinesh, just add me as friend and message me when it comes out ill let you know
© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy