Jump to content

dantesieg

dantesieg

Member Since 03 Oct 2010
Offline Last Active May 03 2014 05:22 PM
-----

Posts I've Made

In Topic: OS X Lion 10.7.2 11C71--- 11C73 GM

06 October 2011 - 04:49 PM

No problems here. I signed up for icloud using my hackbook. I am using RevoBoot, not chameleon. Using MacBookPro 6,2 for smbios, generated serial with Champlist. My ethernet was always en0 and seen as built in, no special steps taken. Also i use opendns. Here is my dsdt and ioreg.

Attached File  Archive.zip   290.83KB   11 downloads

In Topic: HP DVx ACPI 3.x/4.x Battery Driver (10.6/10.7)

22 September 2011 - 12:55 PM

It works perfect, thank you gsly.

In Topic: Chameleon v2.1 (Main Trunk)

22 July 2011 - 09:51 PM

Hi!
FYI:

Cham ver 1192 and 1208 break my WIFI hardware for lion ,it also have a issue with restart, however 1078 is OK for lion.

//Peter


I have same problem on Lion, AR9285 is not working with version 1200, also panic on restart about AirPortAtheros40.kext.

In Topic: Supported Graphics cards with Full QE/QI

18 July 2011 - 02:46 PM

GT240M works fully (even brightness works without any extra kext) with those efi strings, you may have to customize device-path for your system.

[codebox]
<key>PciRoot(0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)</key>
<dict>
<key>@0,AAPL,blackscreen-preferences</key>
<string>0x00000000</string>
<key>@0,AAPL,boot-display</key>
<string></string>
<key>@0,NVDA,UnderscanMin</key>
<string>0x00000052</string>
<key>@0,NVMT</key>
<data>
DgP/IAYQzZyAB7AEIAiwB9AHAADTBLMEuQQAAIDaLQkAAAEB/wAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD//wAAAAAAAED/EAUCAAAAAAAABAAI
AAD/AwAAAAAAAAAAAACAB7AEgAewBA==
</data>
<key>@0,backlight-control</key>
<string>0x00000001</string>
<key>@0,built-in</key>
<string></string>
<key>@0,compatible</key>
<string>NVDA,NVMac</string>
<key>@0,connector-type</key>
<string>0x00000002</string>
<key>@0,device_type</key>
<string>display</string>
<key>@0,display-cfg</key>
<string>0x00000103</string>
<key>@0,fboffset</key>
<string>0x00030000</string>
<key>@0,name</key>
<string>NVDA,Display-A</string>
<key>@0,pwm-info</key>
<data>
AhgAZJBZAgAIUgAApRwAAAAEAAABAAAA
</data>
<key>@0,use-backlight-blanking</key>
<string></string>
<key>@1,AAPL,blackscreen-preferences</key>
<string>0x00000000</string>
<key>@1,NVDA,UnderscanMin</key>
<string>0x00000052</string>
<key>@1,can-hot-plug</key>
<string></string>
<key>@1,compatible</key>
<string>NVDA,NVMac</string>
<key>@1,connector-type</key>
<string>0x00000400</string>
<key>@1,device_type</key>
<string>display</string>
<key>@1,display-cfg</key>
<string>0x0101ffff</string>
<key>@1,name</key>
<string>NVDA,Display-B</string>
<key>AAPL,aux-power-connected</key>
<string>0x00000001</string>
<key>AAPL,backlight-control</key>
<string>0x00000001</string>
<key>AAPL,slot-name</key>
<string>PCI Slot 1</string>
<key>AAPL00,DataJustify</key>
<string>0x00000001</string>
<key>AAPL00,Dither</key>
<string>0x00000000</string>
<key>AAPL00,DualLink</key>
<string>0x00000001</string>
<key>AAPL00,Inverter</key>
<string>0x00000000</string>
<key>AAPL00,InverterFrequency</key>
<string>0x00005208</string>
<key>AAPL00,LinkFormat</key>
<string>0x00000000</string>
<key>AAPL00,LinkType</key>
<string>0x00000000</string>
<key>AAPL00,PixelFormat</key>
<string>0x00000000</string>
<key>AAPL00,T1</key>
<string>0x00000000</string>
<key>AAPL00,T2</key>
<string>0x00000001</string>
<key>AAPL00,T3</key>
<string>0x000000c8</string>
<key>AAPL00,T4</key>
<string>0x000000c8</string>
<key>AAPL00,T5</key>
<string>0x00000001</string>
<key>AAPL00,T6</key>
<string>0x00000000</string>
<key>AAPL00,T7</key>
<string>0x00000190</string>
<key>AAPL00,blackscreen-preferences</key>
<string>0x00000000</string>
<key>AAPL01,blackscreen-preferences</key>
<string>0x00007270</string>
<key>NVCAP</key>
<data>
BAAAAAAAAQD+AAAAAAAACgAAAAAAAAAA
</data>
<key>NVDA,Features</key>
<string>0x00c806ff</string>
<key>NVPM</key>
<data>
AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
</data>
<key>VRAM,memvendorID</key>
<string>0x0001</string>
<key>VRAM,totalsize</key>
<string>0x40000000</string>
<key>device_type</key>
<string>NVDA,GeForce</string>
<key>model</key>
<string>Nvidia GeForce GT240M</string>
<key>reg</key>
<data>
AAABAAAAAAAAAAAAAAAAAAAAAAAQAAECAAAAAAAAAAAAAAAAAAAAARQAAUIA
AAAAAAAAAAAAAAAAAAAQHAABAgAAAAAAAAAAAAAAAAAAAAIkAAEBAAAAAAAA
AAAAAAAAgAAAADAAAQIAAAAAAAAAAAAAAAAAAAIA
</data>
<key>rom-revision</key>
<string>0x32333533</string>
<key>subsystem-id</key>
<string>0x000000c8</string>
</dict>
[/codebox]

In Topic: RevoBoot

01 July 2011 - 02:14 PM

Are you using static data for your DSDT? if so can you try it loading your DSDT.aml file at boot time?
You'll need to make the following changes to settings.h:
#define STATIC_DSDT_TABLE_INJECTION to 0
#define LOAD_DSDT_TABLE_FROM_EXTRA_ACPI to 0
and then add the same DSDT.aml you use for Chameleon in to /Extra/ACPI/ in your RevoBoot drive.

Thanks for help blackosx. Yes i use static dsdt. But i tried that too, same thing happens. DHP explained in there what is PinConfiguration but i don't understand what causes the difference between bootloaders.
© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy