Jump to content



Member Since 04 Jan 2010
Offline Last Active May 01 2013 03:54 AM

Posts I've Made

In Topic: Chinese Macbook Air clone compatibility

30 April 2013 - 03:19 AM

Does the touchpad allow for multitouch gestures ?

In Topic: ASUS P6T Workstation Pro - SAS Controller

27 February 2013 - 03:39 AM

Hi Aqua-mac
Do you mind listing your mods to the SL kext ?
I want to modify the kext for 10.7.5

In Topic: Soundmax ad2000b and marvel 88se6320 SAS P6T7 kexts Lion

27 February 2013 - 03:36 AM

aquamac has enabled the esata ports on this mobo at least.

I am going to try it out when I have time.

In Topic: G5 - ATX front panel cable conversion question

04 February 2013 - 03:05 AM

Thats exactly right. Thanks!

Is this what you're seeing??? This is a G5 cable cut in half:

As I mentioned on my response to you on my website, that is simply shielding that can be removed (just plastic and aluminum foil). If this is not what you are seeing, maybe you bought a front panel cable for a late 2005 G5??

In Topic: [Guide] Getting XFX HD6850 connectors to work

13 November 2012 - 11:33 PM

Hi VCH888
I am trying to get my Powercolor HD6870 working with your settings. For some reason, I think my system is ignoring the FraMebuffer settings..
This is VERY strange.
I installed the modded kext using Kext Wizard and rebooted.

bdmesg shows it recognized but then
Using PCI-Root-UID value: 1
ATI Framebuffer Addr: @0xC0000000 MMIO Addr: @0xF9FC0000 I/O Port Addr: @0x0000A000 ROM Addr: @0xF9FA0000
ATI card POSTed, reading Video BIOS from legacy space
Framebuffer set to: Gibba using AtiConfig=Gibba
Number of ports set to: 5 using framebuffer's default.
AMD Radeon HD 6870 1024MB [1002:6738] (subsys [1002:00d0]) (Barts:Gibba) :: PciRoot(0x1)/Pci(0x3,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)
nVidia GeForce GTX 560 Ti 448 -4095MB NV1ff [10de:1087] :: PciRoot(0x1)/Pci(0x3,0x0)/Pci(0x0,0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)
Bad display config block signature (0xd1260867)
ERROR: nVidia ROM Patching Failed!

Strange thing is, with any kext, any framebuffer settings, no matter what I do, I only get this ioreg output..
I also have darkwarke=0 and PCIRootUID=1 in my boot options.
Without darkwake I cannot recover from sleep. Without PCIRoot I get a white screen and then it reboots.

Anmols-Mac-Pro:MacOS anmol$ ioreg | grep ATY
| | | | | +-o ATY,ATY,RadeonFramebuffer@0 <class AtiFbStub, id 0x100000325, registered, matched, active, busy 0 (25 ms), retain 7>
| | | | | +-o ATY,ATY,RadeonFramebuffer@1 <class AtiFbStub, id 0x100000326, registered, matched, active, busy 0 (5 ms), retain 7>
| | | | | +-o ATY,ATY,RadeonFramebuffer@2 <class AtiFbStub, id 0x100000327, registered, matched, active, busy 0 (5 ms), retain 7>
| | | | | +-o ATY,ATY,RadeonFramebuffer@3 <class AtiFbStub, id 0x100000328, registered, matched, active, busy 0 (5 ms), retain 7>
| | | | | +-o ATY,ATY,RadeonFramebuffer@4 <class AtiFbStub, id 0x100000329, registered, matched, active, busy 0 (5 ms), retain 7>

No other framebuffer gets recognized.
I have attached my boot.plist and the modded kext.

Any suggestions..?
Lion 10.7.5 if that matters.
© 2015 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy