Jump to content

vindu

vindu

Member Since 25 Aug 2006
Offline Last Active Jul 08 2017 01:59 PM
-----

Posts I've Made

In Topic: Driver for LSI MegaRAID SAS family

24 June 2015 - 06:30 AM

i've got an ibm m1115 which i had crossflashed to a lsi 9211-8i IR previously which i've re-flashed with the m1015 bootrom and the newest firmware from ibm which appears to be 20.11.1-0184

currently running 10.10.3
installed the release sasmegaraid.kext and have it showing up in the system information which is great
problem is it doesn't seem to be recognising any disks connected to it though, i know the driver will only present logical disks so the os so i've tried creating single disk raid0 arrays as well as creating a 2 disk raid0 array but they don't seem to show up in the os at all?
mfiutil is able to identify the individual disks as well as the volumes but nothing shows up in disk utility
have tried flipping the prefermsi key as well as the uncontiguous enumeration kext too without any change
 

here's the output from mfiutil

sh-3.2# mfiutil show adapter
mfi0 Adapter:
    Product Name: ServeRAID M1015 SAS/SATA Controller
   Serial Number: SP30205654
        Firmware: 20.11.1-0184
     RAID Levels: JBOD, RAID0, RAID1, RAID10
  Battery Backup: not present
           NVRAM: 32K
  Onboard Memory: 0M
  Minimum Stripe: 8K
  Maximum Stripe: 64K
sh-3.2# mfiutil show drives
mfi0 Physical Drives:
 1 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150603400379> SATA E1:S4
 2 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=143799401997> SATA E1:S7
 3 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=145218403311> SATA E1:S0
 4 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150284400376> SATA E1:S3
sh-3.2# mfiutil show config
mfi0 Configuration: 1 arrays, 1 volumes, 0 spares
    array 0 of 4 drives:
        drive  3 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=145218403311> SATA
        drive  4 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150284400376> SATA
        drive  1 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150603400379> SATA
        drive  2 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=143799401997> SATA
    volume mfid0 (950G) RAID-0 64K OPTIMAL <ssdraid0> spans:
        array 0
sh-3.2# mfiutil show volumes
mfi0 Volumes:
  Id     Size    Level   Stripe  State   Cache   Name
 mfid0 (  950G) RAID-0      64K OPTIMAL Disabled <ssdraid0>

any idea guys?

 

 

update: managed to flash the m1115 with the lsi megaraid 9240-8i firmware which made it pickup as an actual m1115, still no difference in osx :( sasmegaraid picks it up, shows the disks but just won't passthrough the virtualdisks

here's the new output:

sh-3.2# mfiutil show adapter
mfi0 Adapter:
    Product Name: ServeRAID M1115 SAS/SATA Controller
   Serial Number: SP30205654
        Firmware: 20.13.1-0208
     RAID Levels: JBOD, RAID0, RAID1, RAID10
  Battery Backup: not present
           NVRAM: 32K
  Onboard Memory: 0M
  Minimum Stripe: 8K
  Maximum Stripe: 64K
sh-3.2# mfiutil show drives
mfi0 Physical Drives:
 0 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=143799401997> SATA E1:S7
 1 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=145218403311> SATA E1:S0
 2 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150603400379> SATA E1:S4
 3 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150284400376> SATA E1:S3
sh-3.2# mfiutil show config
mfi0 Configuration: 1 arrays, 1 volumes, 0 spares
    array 0 of 4 drives:
        drive  1 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=145218403311> SATA
        drive  3 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150284400376> SATA
        drive  2 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=150603400379> SATA
        drive  0 (  238G) ONLINE <SanDisk SD7SB3Q2 0000 serial=143799401997> SATA
    volume mfid0 (950G) RAID-0 64K OPTIMAL <sandisk_4xr0> spans:
        array 0
sh-3.2# mfiutil show volumes
mfi0 Volumes:
  Id     Size    Level   Stripe  State   Cache   Name
 mfid0 (  950G) RAID-0      64K OPTIMAL Disabled <sandisk_4xr0>

update2: turns out it's been working all along, just didn't show up in disk utility gui or in terminal. read through the entire thread again and had found a post mentioning needing to format the drive in windows first before showing up in osx so i booted a windows installation, formatted in ntfs then formatted it in hfs+ in osx and all is well :)

In Topic: ESXi 5 Mac OS X Unlocker

23 July 2014 - 10:36 PM

d'oh, thought as much

 

cheers for the hard work Donk :)

In Topic: ESXi 5 Mac OS X Unlocker

21 July 2014 - 10:42 PM

any way around the "The guest operating system 'darwin11_64Guest' is not supported." error in vcenter? :(

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy