Jump to content

mcdougal33

mcdougal33

Member Since 20 Aug 2006
Offline Last Active Private
-----

#2056212 Wake reason: RTC (Alarm) - how to deactivate?

Posted by mcdougal33 on 28 August 2014 - 06:22 PM

I have something I'm going to test.  As someone else had already mentioned, discoveryd may be replaced mdnsresponder.  What I did was disabled discoveryd and enabled mdnsresponder (with my -DisableSleepProxyClient modification).  I'm betting that discoveryd is waking the computer up every 2 hours to register with a sleep proxy server.  I am not sure if there is an option for discoveryd to disable that.  Anyway, I won't be able to test if the computer stays a sleep or not until later tonight. Here is what I did: Disable discoveryd:sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plistEnable mDNSResponder:sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plistI'll update this post once I test sleep tonight. UPDATE:  Since disabling discoveryd and enabling mdnsresponder with -DisableSleepProxyClient my computer no longer wakes up every 2 hours.  

#2055832 Wake reason: RTC (Alarm) - how to deactivate?

Posted by mcdougal33 on 27 August 2014 - 03:05 PM

RAWR - that forum is so slow and has connection errors and just deleted my nice long answer. So here's the short version: Your suggestion didn't work for me:8/27/14 2:38:04.000 PM kernel[0]: Wake reason: RTC (Alarm)8/27/14 4:26:59.000 PM kernel[0]: Wake reason: RTC (Alarm)8/27/14 4:27:11.698 PM ntpd[213]: wake time set +0.495133 s8/27/14 4:46:18.000 PM kernel[0]: Wake reason: USB1- how can I check if mDNSRepsonder service is working? I have started it once with your command but I don't know if I have to do that after every boot? I guess we have to wait for the final Yosemite version and hope for a fix... :/Yeah it's not working for me either like I thought it was.  Mine still wakes every 2 hours. I can live with it for now though.  At least it wakes up and then goes back to sleep on its own. You can check and see if mdnsresponder is running by doing a 'ps -ax | grep -i mdns' in terminal (without quotes).  You should see this: 1444...

#2055693 Wake reason: RTC (Alarm) - how to deactivate?

Posted by mcdougal33 on 27 August 2014 - 12:54 AM

thank you for your input mcdougal33. I tried what you suggested but it broke my internet. Well, to be precise: my system log is flooded with DNS errors and nothing loads anymore because of timeout errors. I probably added the -DisableSleepProxyClient at the wrong spot? This is what my mDNSResponder.plist looked like:<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"><plist version="1.0"><dict> <key>Label</key> <string>com.apple.networking.mDNSResponder</string> <key>Disabled</key> <true/> <key>OnDemand</key> <false/> <key>InitGroups</key> <false/> <key>UserName</key> <string>_mdnsresponder</string> <key>GroupName</key> <string>_mdnsresponder</string> <key>ProgramArgum...

#2054963 Wake reason: RTC (Alarm) - how to deactivate?

Posted by mcdougal33 on 24 August 2014 - 05:44 PM

I was having the exact same problem.  You could try adding -DisableSleepProxyClient to the program arguments in /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist   You may also have to turn on mdnsresponder.  For some reason it's turned off in yosemite beta.  'sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist"

#2038228 New Driver for Realtek RTL8111

Posted by mcdougal33 on 08 July 2014 - 05:44 PM

EDIT: Forgot to mention I am on 10.9.4 1.2.2dev1 is working for me.  On 1.2 stable I was seeing something in the logs about lost interupt.  I don't get that now. Here are logs for 1.2.2dev1.  Everything looks good.2014-07-07 10:04:07.000 PM kernel[0]: Ethernet [RealtekRTL8111]: EEE support enabled.2014-07-07 10:04:07.000 PM kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled.2014-07-07 10:04:07.000 PM kernel[0]: Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled.2014-07-07 10:04:07.000 PM kernel[0]: Ethernet [RealtekRTL8111]: Using interrupt mitigate value 0xcf68.2014-07-07 10:04:07.000 PM kernel[0]: Ethernet [RealtekRTL8111]: RTL8168D/8111D: (Chipset 9) at 0xffffff811f7e5000,  0:26:18:fe:70:ac2014-07-07 10:04:16.000 PM kernel[0]: Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control

#2037965 New Driver for Realtek RTL8111

Posted by mcdougal33 on 08 July 2014 - 02:25 AM

Last night I rewrote much of the code in order to get closer to the underlying linux driver. The most important difference is that the driver now performs a reinitialization of the MAC when a connection is established the same way as the linux driver does. Maybe this is required to get the RTL8111G working properly? Anyway I would like to ask all users to test this driver regardless of the RTL8111 version as this is not a bug fix but more a completely new driver. When giving feedback don't forget to take a look at the kernel log and include the chipset number (1-27) as this is the information uniquely identifying the version of the RTL8111. This driver has undergone only a limited number of tests. All I can confirm is that it works on chipset 16 (RTL8111E-VL). Good luck! Mieze I'm going to give this a try right now.  I've been having a strange issue with the latest stable version where I lose my IP some times when I wake from sleep.  Renewing DHCP lease...

#1954569 Graphics - No GPU Power Management

Posted by mcdougal33 on 14 October 2013 - 04:40 PM

I'm having no gpu power management issues with my GTX560ti after editing the AGPM kext.  Before the edit it would get stuck in state 0 after sleep.  It was the exact same way in mountain lion too. Here are my settings for iMac11,3.  If you're using a macpro profile then the control-id needs to be 18.   <key>iMac11,3</key><dict><key>Vendor10deDevice1200</key><dict><key>Heuristic</key><dict><key>ID</key><integer>0</integer><key>IdleInterval</key><integer>250</integer><key>SensorOption</key><integer>1</integer><key>SensorSampleRate</key><integer>4</integer><key>TargetCount</key><integer>5</integer><key>Threshold_High</key><array><integer>55</integer><integer>40</integer>...

#1709943 ULTIMATIVE wakeup the Lion from sleep topic

Posted by mcdougal33 on 06 July 2011 - 05:45 PM

Asus P7P55D BIOS 2003 DSDT created from DSDT Auto-patcher Sleep and wake from sleep works now that I have patched AppleRTC. Hopefully a pure DSDT solution comes around, but for now this works fine.
© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy