Jump to content



Member Since 03 Jul 2009
Offline Last Active Oct 08 2017 11:29 AM

#2133138 Broadcom Bluetooth Injector

Posted by Marchrius on 04 May 2015 - 05:36 PM

Any time you have an injector kext which only uses an Info.plist (no binary), you can put the same info into the Info.plist of FakeSMC.kext and then you don't need the extra kext.You are rigth, but I personally prefer to have a kext for every injection (or for a specific computer) and leave the fakesmc stock becouse If I update the FakeSMC I have to update also the Info.plist every time. My goal is a kext that will not be overwritten.

#2132193 Broadcom Bluetooth Injector

Posted by Marchrius on 30 April 2015 - 09:58 AM

Hi guy!   For who have problem to make work a Broadcom Bluetooth USB device can install this Injector and cross the finger!   But first, check if your idProduct and idVendor are in the list below, if not feel free to post yours and I'll add it to both kext and list: idProduct idVendor 0x3404 0x13D3 (AzureWave AW-CE123H) 0x21EC 0x0A5C (Inateck BTA-BC4B6)Download: Broadcom BCM20702A0 Kext Injector

#2132191 Decompiled MS IrDA drivers

Posted by Marchrius on 30 April 2015 - 09:52 AM

Hi Andy! I'm reading your posts "IOUSBFamily" and this. I'm thinking, there is a way to build a driver to make work a Winbond Consumer Infrared Receiver ? I have an IrDA and a section in my native DSDT like this:Device (CIR) { Method (_HID, 0, NotSerialized) // _HID: Hardware ID { If (LLess (OSYS, 0x07D6)) { Return (0x2310A35C) } Else { Return (0x2010A35C) } } OperationRegion (WBIO, SystemIO, 0x2E, 0x02) Field (WBIO, ByteAcc, NoLock, Preserve) { INDX, 8, DATA, 8 } Mutex (WBMX, 0x00) IndexField (INDX, DATA, ByteAcc, NoLock, Preserve)...

#2131851 ms-sys ported to Mac OS X

Posted by Marchrius on 28 April 2015 - 08:00 PM

Cool! Thanks! :)

#2128290 Enable TRIM on non-Apple SSD

Posted by Marchrius on 15 April 2015 - 06:27 PM

 Hi Guys, I just installed 10.10.3 via Chamelon and did the Patch using method 2. Unfortunately I ended up with "Mac Kernel overflows available space. System halted" during bootup. I managed to boot using "ignore caches" and (hopefelly) restored the orignal file via those 3 commands 1sudo cp /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage.bak  /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage2sudo touch /System/Library/Extensions  3sudo kextcache -prelinked-kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache -K /System/Library/Kernels/kernel /System/Library/Extensions However, I still can't boot without the Kernel overflow error. Any idea on how to fix that? Thanks You can use the application in Download section.

#2084253 Enable TRIM on non-Apple SSD

Posted by Marchrius on 11 November 2014 - 10:47 PM

 Okay i found that the kext does exist but it still won't enable and changes to what i wrote before. I was doing this through clover configurator. When I open the plist directly without clover configurator it says this: <key>KextsToPatch</key><array><dict><key>Comment</key><string>TRIM Enabler</string><key>Find</key><data>rg8AAAAAAAo=</data><key>Name</key><string>IOAHCIBlockStorage</string><key>Replace</key><data>qqqqqqqqqgo=</data></dict> Is this my problem? Should I just change it here manually? If so, any idea why clover configurator is changing it like it is? If you want to use Clover Configurator you must put the value as Data. You have entered it as base64 string. The third methos shows you how to put the patch directly in config.plist without use of clover configurator. So, if you want...

#2081055 Enable TRIM on non-Apple SSD

Posted by Marchrius on 04 November 2014 - 02:37 PM

Hi, Firstly i used trim enabler without success at first reboot. It wrotes kext dev in nvram but get stucked at reboot : pci configuration be... Then i used your clover method. I experienced some boots stucked at pci configuration be.. now it is gone, but i still don't explain it. Is there a relation when you alter the kext and pci configuration begin?I think the problem was the kernelcache. Trim enabler is for real mac, on hackintosh you fan have some problem.

#2081028 Pandora's Box 2.0 Candidate 3 roll out

Posted by Marchrius on 04 November 2014 - 01:19 PM

Good work! :)

#2076456 Enable TRIM on non-Apple SSD

Posted by Marchrius on 26 October 2014 - 02:40 PM

Me too,boot failed.don't know how to fix.i try all 3 solution and no one seems to work , i was failed to boot again Yosemite after i did try thowse and need a fresh install... What else can i do ?Post your config.plist

#2072325 Enable TRIM on non-Apple SSD

Posted by Marchrius on 20 October 2014 - 08:56 AM

screen1png.png Tried 3'rd method and no trim. I'm on Yosemite 10.10 (14A389) and clover 2953Wrong place to pur the code. Must go under kextpatches With Trim Enabler app, when I click on proceed, the program should be disable the Kext-signing, then reboot and give me the possibility to enable Trim, but when system reboot and open again Trim Enabler app, I can't enable Trim! I've also tried with kext-develop args on clover boot, but nothing happens. :(Trim enabler isn't supported by Yosemite. Use the third metodo at first post if you have Clover.

#2057511 [Guida] Mountain Lion su Acer Aspire 6930G

Posted by Marchrius on 03 September 2014 - 04:58 AM

Scusate se riapro un vecchio post, volevo chiedere se è possibile seguire questa guida installando Mavericks invece di ML utilizzando gli stessi file. Grazie in anticipo ;)Non suo se è già presente in qualche post precedente ma al momento questo è il pacchetto più aggiornato, nel pomeriggio posso metterti i file che sto utilizzando al momento. [emoji1] http://marchrius.alt...AIO_1532014.zip

#2048812 Enable TRIM on non-Apple SSD

Posted by Marchrius on 05 August 2014 - 07:27 PM

I put the third method in the config.plist for Clover on my USB drive witch is going to install Yosemite Beta on my SSD. I can see that TRIM is enabled via the System Information. I'll tell you later if it still the case after the installation. Thanks for your methods.It should work with the next betas and the final release. If not let me know [emoji1]

#2040501 OS X Yosemite DP's builds!

Posted by Marchrius on 14 July 2014 - 02:35 PM

what is right way to rebuild kernelcache from Single user mode ? because my yosemite reboot after verbos done loading and i get white screen then it reboot ,,, any suggestions ?   EDIT : it booted after  20 times reboot,  :( The best way to manually recreate the kernelcache is this (IMHO) :sudo kextcache -prelinked-kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache -K /System/Library/Kernels/kernel /System/Library/ExtensionsIf your kernel and/or your Extensions folder are in a different path you must change it. With this command you can produce a kernelcache for your (if you have one) personalized kernel (like atom, amd kernels). For the vanilla one you can use the command above. Remember, you must boot Yosemite with kext-dev-mode=1 if you want to use the command. In Mavericks you can recreate the kernel of another OS with the correct paths. e.g. from Mavericks I want to create kernelcache in Yosemite:sudo k...

#2027190 OS X Yosemite DP's builds!

Posted by Marchrius on 08 June 2014 - 01:50 PM

The problem is actually this : sudo perl -pi -e 's|\x00\x41\x50\x50\x4c\x45\x20\x53\x53\x44\x00|\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00|' /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/LibraryIOAHCIBlockStorage && sudo touch /System/Library/Extensions Not the lower neither upper case i.Oops! :) You are right! :) Sorry for mistake!

#2026737 OS X Yosemite DP's builds!

Posted by Marchrius on 07 June 2014 - 01:02 PM

Hey ! How about TRIM support? Have anyone managed to activate it yet? The new TRIM patch issudo perl -pi -e 's|\x00\x41\x50\x50\x4c\x45\x20\x53\x53\x44\x00|\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00|' /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage && sudo touch /System/Library/Extensionsthen reboot and voilà, the TRIM is enabled.

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy