Jump to content

djfremen

djfremen

Member Since 10 Mar 2009
Offline Last Active Yesterday, 06:46 PM
-----

#2214364 HP Z400 / Z600 / Z800 Workstations Yosemite 10.10.x Installation

Posted by djfremen on 09 February 2016 - 07:40 AM

OK - I'm 100% running now without issues on 10.11.3!   :thumbsup_anim: Various issues fixed with DSDT (including Intel ESB2 AHCI). My advice is to wait to install DSDT though, only after successful usb install (don't use it on USB extra). Attached you'll see my extra folder. Please disregard sil3132.kext if you don't have that hardware. Keep me posted if anyone gets this working with Clover. Thanks, http://browser.prima...kbench3/5202019  Extra.zip 3.15MB 4 downloads

#2214342 HP Z400 / Z600 / Z800 Workstations Yosemite 10.10.x Installation

Posted by djfremen on 09 February 2016 - 12:47 AM

Great Have you boot without -x and you haven't any problem with freezes in finder?Yes. Booted as above without -x and NV_Disable. No issues other than installing the drivers. Network worked out of box (AppleBCM5701Ethernet.kext) and Graphics (NVDANV50HAL). RAM is reporting wrong amount. Easy fix. No USB issues. No Freezes in Finder associated with chipset. Used sil3132.kext from Sonnet to get past legacy AHCI issue. Still troubleshooting that. This may be the cause of finder freezes others are experiencing. I'll report back if I make some headway.

#2213612 HP Z400 / Z600 / Z800 Workstations Yosemite 10.10.x Installation

Posted by djfremen on 06 February 2016 - 12:44 AM

Good News: The Enoch Method works for 10.11 - El Captain. On other Mac / Hack: Create an El Captain 8GB USB via the Enoch installer. Use Kext Wizard to install Micky's Block Storage Kext (posted on page 1) and rebuild / repair permissions in extra on USB. Update on "AHCIPortInjector_v1.0.0_Micky1979.kext" and "IOAHCIBlockStorageInjector_v1.0.0_Micky1979.kext" - these kexts cause USB kernel panic, do not use for El Cap install! Boot from USB: Use the following flags to get into the installer: -x -f -v PCIRootUID = 0 GraphicsEnabler = Yes Nv_disable = 1 Hope this helps anyone trying to get this working on El Cap.

#1894538 New OS X compatible motherboard -> QUO

Posted by djfremen on 06 March 2013 - 03:50 PM

Yes but QUO is covering themselves by saying 'all OS' supported, they're not making the cardinal mistake Psystar made by pre-installing. Also, Apple would have a hard time telling all its vendors to use different chipsets. The reason this board works (on paper) is because Apple uses these components in their Mac Pro. Honestly, I'm way more concerned with Apple going exclusively to ARM. That could be catastrophic.

#1894097 9500GT 512 MB: Black screen or no acceleration

Posted by djfremen on 04 March 2013 - 09:15 PM

Have the 9800 GT (basically the same card) working with a custom DSDT. Couldn't get it working otherwise and tried just about everything. RampageDev (google him) helped me write it. You should ask him. He's super knowledgable about these cards. Good Luck.

#1858278 [SOLVED] RocketRAID 2300 not working in Mountain Lion

Posted by djfremen on 05 October 2012 - 04:15 AM

Ended up using an old 64 bit driver. Now it sees it as parallel SCSI. (See Attached)  ImageUploadedByTapatalk1349410537.490697.jpg 219.96KB 42 downloads
© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy