Jump to content

maleorderbride

maleorderbride

Member Since 17 Jan 2009
Offline Last Active Today, 02:18 AM
-----

#2240132 Haswell-E 5820k 5930k installation guide with full speedstep working

Posted by maleorderbride on 24 May 2016 - 10:11 PM

There is no always working method. If you add enough PCIe, TB, and other devices, then eventually you have the problem. You can always do a non-UEFI install of Clover (even to the ESP still) if need be. 

#2236169 El Capitan 10.11.1 versus the 5960X - A Collaborative Work-Thru

Posted by maleorderbride on 04 May 2016 - 10:38 PM

Can't you build again the other x99 build with El Capitan (10.11.4) on another HD and then have it booting again in your 14 core ? Boa sorte, Paulo Yea, I tried that. Still no go. There must be another variable here. I'll keep playing with it.

#2236107 El Capitan 10.11.1 versus the 5960X - A Collaborative Work-Thru

Posted by maleorderbride on 04 May 2016 - 05:06 PM

Here is the EFI, It think that is back in the exact state it was when it first worked: https://dl.dropboxus... E5-2697 V3.zip When it worked, I just assumed something had changed in 10.11.4 and I was out of the loop (haven't read this thread in awhile). I only came here after it stopped working =/

#2211788 AppleGraphicsDevicePolicy "on the fly" patching - impossible? (altern...

Posted by maleorderbride on 30 January 2016 - 05:08 PM

The MacPro6,1 kexts must be doing something tricky under the hood. Even though the plist declares "GFX1" "unload", it seems that GFX1 remains the functional device and GFX2 is dead after OS X loads on a hackintosh. Maybe something to do with "Device (GCON)" in the OEM DSDT. I'm no coder so I don't know. The usual school of thought says, give all individual devices unique names IE: GPU # 1 = GFX1 GPU # 2 = GFX2 etc etc, but naming multiple GPUs GFX1 works! If you have multiple discrete GPUs, use GFX1 in ACPI for all GPUs and they will all work. No kext binary patch or plist edit necessary. If you name discrete GPU to GFX1 and leave the IGPU name alone, does the integrated graphics still work? I don't have a system with integrated graphics to test.Thanks shilohhh. This allows me to get a multi-card setup working with MacPro6,1. Adding an SSDT with GFX1 and voila ;) 

#2209880 Apple with 10.11.3 Gives Native Support on Haswell-E Xeon CPU ?

Posted by maleorderbride on 24 January 2016 - 05:17 AM

About to test this with some Xeons! ;)

#2206977 El Capitan 10.11.1 versus the 5960X - A Collaborative Work-Thru

Posted by maleorderbride on 15 January 2016 - 07:09 PM

Attached are the ACPI dump files that differ between my 12-core Xeon (which is able to run 10.11.2 El Capitan without any rollbacks, kernel patches, or anything of that sort) and augustopaulo's i7-5960X's. We both have an ASUS X99 Deluxe on 1901 BIOS. Does anyone know how to force clover to load some or all of these?  edit: thanks Jaime! (and right you are Ken!) I forgot to click Attach. Attached Files  ACPI Differences .zip 71.13KB 16 downloads

#2199331 Haswell-E 5820k 5930k installation guide with full speedstep working

Posted by maleorderbride on 21 December 2015 - 04:13 PM

Can you please post your BIOS settings for watts & amps or a screenshot ? Thanks. Boa sorte,PauloSure! I just did what Pike outlined in his blog post all those months back and that was linked in the OP. Also, I just checked (set the BIOS back to optimized defaults) and still have proper watts showing in IPG, so not sure why I have it. Perhaps it is a Xeon thing? The settings (on an ASUS X99) are under the Ai Tweaker->Internal CPU Power Management:Long Duration Package Power Limit: 160 WattsCPU VR Integrated Current Limit: 190 Amps While the don't change my Intel Power Gadget readouts, they do give my turbo an extra ~20-30 Watts which allows it to stay at its highest binned turbo (3.0GHz) more, but also allows me to occasionally hit 3.1GHz all core. My clover settings are from the guide, other than KernelPm enabled and using Balamut's addition of the "-x 1" flag when generating my SSDT.

#2168460 Haswell-E mach_kernel patch (5960X, 5830K and 5820K) 10.10 - 10.10.1 Yosemite

Posted by maleorderbride on 16 September 2015 - 10:23 PM

Thank you for the test. For the moment all the CPU with more than 6 core need to use these kext. No problem! Not quite. I can use a 12-core Xeon V3 completely vanilla, and have been able to do so since 10.10.2. No kernel patch, no 10.9.5 IOPCI or ACPIPlatform. I don't need VoodooTSCSync either. Edit: Edkroket I am able to get the TB to Eth adapter to work now. Thanks!

#2168453 Haswell-E mach_kernel patch (5960X, 5830K and 5820K) 10.10 - 10.10.1 Yosemite

Posted by maleorderbride on 16 September 2015 - 09:40 PM

Hey guys I need your help to update the guide. I need someone try running Yosemite 10.10.5 without a patch to see if it works. So update the 10.10.5 combo update and restart? no kernel patch? Anything else?  Installing 10.10.5 Combo on my otherwise working (see above) 5960X system. Just FYI, other E5-26xx V3 CPUs have not needed a kernel patch since like 10.10.2 or so. The i7's do, and so does the E5-2697 V3.   Edit: Good call Stinga. My 5960X systems starts up without a kernel patch in place under 10.10.5. I still have the Legacy IOPCIFamily and ACPIPlatform. Don't suppose you have found any way to get rid of those two legacy kexts, have you? My Xeon V3's don't need them if they are 4,6, or 12-core CPUs. Again the 14-core E5-2697 V3 needs it though ;(

#2118701 [possible solution][X99] OsxAptioFixDrv: requested memory exceeds our allocat...

Posted by maleorderbride on 10 March 2015 - 08:04 PM

OK, posted in Coderush's topic. I am sure what I am asking is impossible (or at least impractical), but I had to check!Thanks for your information Dmazar!

#2114647 Yosemite GTX 9xx/750/750 ti Compatibility Report

Posted by maleorderbride on 24 February 2015 - 04:04 PM

So I have the Gigabyte GTX 970 4GB  G1 Gaming and was wondering if anyone found a framebuffer or way to get the other two display ports to be detected by OS X on the card. I just got some new monitors and one of the reasons I bought this unit was because its the only 970 (at the time) with 3 DP ports making it perfect for multi-display UHD content. And before you ask, yes I tried MST and that didn't help. Are you using Chameleon? If so, switch to Clover.

#2114397 Clover General discussion

Posted by maleorderbride on 23 February 2015 - 07:32 PM

@maleorderbrideYou paste toooo much information. My browser hangs and I can't see all.  OK, here is the last few commands instead of all of it:Finished building BaseTools C Tools with ARCH=X64bash-3.2# cd Cloverbash-3.2# ./buildgettext.shStatus: gettext-latest.tar.gz not found. % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed100 16.8M 100 16.8M 0 0 4137k 0 0:00:04 0:00:04 --:--:-- 4138k- Creating new RAM diskInitialized /dev/rdisk3 as a 300 MB case-insensitive HFS Plus volume- gettext-latest extract...- gettext-latest configure...- gettext-latest make...- gettext-latest installing...- gettext-latest installed in /Users/MacPro/src/opt/local- Ejecting RAM disk"disk3" unmounted."disk3" ejected.bash-3.2# ./buildgcc-4.9.sh- Building GCC toolchain for x64 Running on Mac OS X 10.10, with x86_64 architecture. Using Xcode SDK: /Applications/Xcode.app/Con...

#2113255 Haswell-E mach_kernel patch (5960X, 5830K and 5820K) 10.10 - 10.10.1 Yosemite

Posted by maleorderbride on 20 February 2015 - 04:21 AM

FYI, there is a new BIOS update for ASUS X99's. Enables USB 3.1. Might want to deal with that first ;)

#2112230 5960X, Rampage V Extreme OsxAptioFix Problem

Posted by maleorderbride on 16 February 2015 - 05:02 PM

I think I have a workaround, at five boots back to back now. Will figure out exactly what made the difference.  Confirmed, workaround. Finally triggered the AptioFix error again on restart. All one needs to do is navigate to System/Library/Caches/com.apple.kext.caches/Startup and delete kernelcache. I suggest doing this before your first startup if you install 10.10 via Rampage's method, then again after your first startup. Add this small bit of information to your guide Andrew. After that, I only rarely saw the error.

#2111196 5960X, Rampage V Extreme OsxAptioFix Problem

Posted by maleorderbride on 13 February 2015 - 12:29 AM

I am on an ASUS X99 Deluxe, latest BIOS, E5-2697 V3 and am getting hung up on PCI Configuration Begins even with AptioFix2, debug=0x14e, and IOPCIFamily rollback. This is from an already working 10.10.2 UEFI install that I did on my UEFI X79 build. Tried with a GT 430 (obviously had to use legacy with the 430) and with a GTX 980 as Web Drivers appear to complicate things with Clover. Tried both UEFI and Legacy, same error, same place. AptioFix spits out fatal errors occasionally, usually relating to graphics flags.   Guess I will install 10.9.5 /w chameleon for now. There seem to be some bugs to work out that are not know at this time and not solved with Rampage's method, nor anyone else's that I have seen. I do not know what the precise variables are, but am happy to try things if anyone has advice.

© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy