Jump to content

sendblink23

sendblink23

Member Since 06 Dec 2008
Offline Last Active May 08 2014 01:50 AM
-----

Topics I've Started

Can you guys post working USB Wireless adapters on 10.6.4?

24 June 2010 - 12:01 AM

Well as the title says it "Can you guys post working USB Wireless adapters on 10.6.4?"

All the threads I see are pretty old about mentioning working USB Wireless adapters.. most max I see they mention is on 10.6.2... well what about 10.6.4?



I have a Netgear WG111v2 which worked perfectly through 10.4 - 10.5, but on 10.6 I've only gotten it to work on 10.6.2 on a laptop (Acer 3680), it does not work on my 2 desktop builds(no clue why the heck to be honest) used same method installed 10.5 installer from realtek rtl8187l then afterwards go in S/L/E drag the kext to the desktop installed it with kext utility and after reboot.. it simply didn't work (realtek app just kept bouncing around, device simply doesn't turn on - it is detected under About This Mac > more info > usb devices), I even did: sudo kextutil -t -v /System/Library/Extensions/rt8187l.kext as suggested on another thread. So my final guess it just works with some computers & other don't(I only work in 32bits not 64bits if you're wondering since I'm on AMD).

So obviously time to give up on this cheap usb wireless & buy a different one.... what are other usb wireless adapters that work perfectly fine under Snow Leopard 10.6.4. Sorry, but please do not recommend me any PCI slot type because I have in my computer 2 video cards and all the Case slots for pci entries are used already from those video cards.

I would appreciate the suggested usb's to be on Ebay.

Set up that i'll be using it for:
CPU: AMD Phenom ii x4 965BE C3 @ 3.80Ghz (224 x 17 - 1.38v)
MOBO: GIGABYTE MA790XT-UD4P
RAM: 8gb (4 x 2gb) DDR3-1333
GFX: XFX 5770 1GB (Windows) / EVGA 9800GTX+ 512MB (OSX)
HD: 1TB Hitachi (Windows 7 Ultimate x64) - 500GB Seagate (Ubuntu 10.04 LTS x64) - 400GB Seagate (Snow Leopard 10.6.4)
Optical Drive: LG DVD-RW
PSU: Corsair TX850w
Case: CM 590
CPU Cooler: Corsair H50 - Exhaust R4's: Fan>Shroud>Rad>Fan

Thanks

We need a 64bit fix for AMD on Snow

03 May 2010 - 08:26 PM

I currently have no idea if there is a fix already out there.. so I'm writing this topic thread just incase there isn't one yet...

Well as most or all AMD users know we can't yet run full 64bit on our beloved Snow

yes we can boot into x64 with: -force64
but all 32bit apps Crash instantly, and well only 64bit apps work on that mode

So we are forced to boot as 32bits only using *maxmem=4096 if we have over 4gb of ram

I honestly hate Windows(I'm planing on fully killing it soon)... I mostly Reside now more on OSX and well I'm a designer... CS5 is now out

what's my big issue I use constantly After Effects & Premier Pro *well on CS5* those apps will only install on 64bit Snow & not on 32bit

I do have CS4 installed.. but If I want CS5... I prefer to save disk space and DUMP CS4 edition


But as you can see.. i cannot install After Effects or Premier Pro CS5 because I can only run the installer in 32bits mode & I can't run it on 64bits(already tested -force64, the CS5 installer will not load).... I mean like this if you run the Installer if we booted in 32bits mode - You won't have the options to install either of them "After Effects & Premier Pro" - they only appear for installing if you booted in 64bits.

So... can anyone already help out on us AMD users to fix this 64bit issue we have, the flaw of not being able to run 32bit apps.

I've already ran Marvin's app & other patching tools they do not fix the 64bit issue(32bits apps still crash instantly on 64bit mode).

(How To)Hazards 10.6.2 on MSI 770-C45 / Phenom ii 965 / ATI 4650

20 March 2010 - 07:42 PM

This is a "How To" installing Snow Leopard 10.6.2 on:

Motherboard: MSI 770-C45
CPU: AMD Phenom ii x4 965be C3
GFX: ATI Sapphire Radeon HD 4650 1Gb DDR2 PCI-e

Also you may need:
-2Gb or more of DDR3 Ram
-SATA DVD Optical Drive
-SATA Hard Drive (I do not recommend doing a partition, get an extra hard drive its better & less issues)
-USB Mouse / Keyboard or PS2 Keyboard / Mouse (I'd recommend USB Keyboard / Mouse)
-Snow Distro: Snow Leopard Client Server 10.6.2 SSE2/SSE3 Intel AMD by Hazard
*Google It*

Sorry this install isn't retail & not using any IDE devices.
I do not take any responsibility if it didn't work for you(damaged hardware, render anything, messed up your Snow or Leopard...etc)... you are on your own if you have issues... I will try to help.. but If I can't fix it... this is Insanelymac you could probably find your fix around.

Start off by downloading the Snow Distro by Hazard (its only about a regular DVD size) no DVD-DL needed & its a direct install of Snow Leopard 10.6.2. You do not have to patch the ISO, you can burn it directly for use on this Mobo.

Burning:
If you are in Windows, I would recommend burning it at your lowest speed with either ImgBurn or InfraRecorder... if you are on OSX (Leopard) just use DiskUtility or Toast and use the lowest burning speed.

Setting up Bios & Installing:
Insert DVD and boot up computer... Enter BIOS (Pressing DEL key on your keyboard)
-Head into Cell Menu:
AMD Cool n Quiet: Disabled
If you are overclocked *IMPORTANT* set everything to Stock settings

-Integrated Peripherals:
On-Chip ATA Devices -> Raid Mode -> Change IDE to AHCI

Save Bios settings: F10

Computer should be booted up again... use Boot Options: Pressing F11
Select your DVD Drive

Upon Chameleon boot up screen(you will see like an Aliens background)... Press F8
Use as boot arguments: -v busratio=20
(I have a quadcore cpu that is why I used Busratio=20 yours could be different boot arguments... maybe try: -v cpus=1 )
now just wait.....

When the language screen is loaded select your language..... once you see the installing screen *Do not run it yet*.... head over to the top: Utilities > Disk Utility

Formatting Hard Drive:
After you have gone to Utilities > Disk Utility

Select your Hard Drive(the one you plan on installing Snow Leopard)
Choose: Partition
1 Partition
Options > GUID
Format: Mac Os Journalized
Name your partition with a very simple name: snowhd

Afterwards close Disk Utility.. and finally we will begin Installation

Click Continue > Agree > Select Hard Drive > Customize

These are the Customize options needed:
AnV 10.2.0 / system kext
Chameleon RC3 PC EFI 10.5
AMD patch
ATI 43x0 45x0 46x0 - This is only if you have my same graphics card (I'll provide the solution for full Q'E)
ATIATA
Realtek R1000
EliotForceLegacyRTC
SATA/ATA
Legacy AHCI Sata
LegacyApplePIIXATA
IOATAFamily SATA Fix
IOATAFamily Fix
*PS2 apple - ONLY CHOOSE THIS IF YOU DON'T HAVE USB MOUSE / KEYBOARD
EvOreboot
Orange Icon
About My Mac Fix
SMBiosResolver
UUID
X11

Choose Install, if the DVD Test starts... let it run until 10% you may skip it from there.
Install should take 15 - 25min or so.... if it all went well... Great! Restart

Upon restarting Boot Options again: Press F11
Choose your Hard Drive (where you installed Snow)

Press F8
Boot Arguments: -v busratio=20
You my encounter the Chameleon does not have a boot timeout... don't worry we will fix this later
If you have over 4Gb of Ram you must need to use as boot arguments: -v busratio=20 maxmem=4096

If you are lucky.... it will all go through.. and you will get a Grey Screen with your mouse(you will not see the Animated OSX Intro)...wait a bit... the language screen will appear.... do all your process of setting up all your info & when done you should appear on your Snow Leopard 10.6.2 Desktop.

No transparency, Q'E or Audio... but you may connect your Ethernet Lan... your internet connection already works ;)


*Lets add Boot Timeout & busratio=20 or busratio=20 maxmem=4096 to com.appleBoot.plist
Finder > select Hard Drive > Library > Preferences > SystemConfguration
Drag to your Desktop: com.appleBoot.plist

Right-Click in your Desktop "com.appleBoot.plist" get info > Open With > choose: Textedit.app > Apply Changes to all

Afterwards just double click: com.appleBoot.plist
Make changes similar to this
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string>busratio=20 maxmem=4096</string>
	<key>Timeout</key>
	<string>3</string>
	<key>Boot Loader Timeout</key>
	<string>3</string>
</dict>
</plist>
Save it (Windows key + S)

Now simply, again Finder > Hard Drive > Library > Prefrences > SystemConfiguration
Right-Click: com.appleBoot.plist > move to Trash
Now Drag com.appleBoot.plist from Desktop to the Windows: Finder > Hard Drive > Library > Prefrences > SystemConfiguration

*Optional*
Drag it as well inside: Finder > Hard Drive > Extra



Getting AUDIO(ALC888S / ALC885):
Download this package: http://www.mediafire.com/?1u2wnfmmdnj
After downloading, install it: AzaliaAudio.pkg
Reboot, upon your Desktop you should already have Audio (Sorry MIC does not work, this is only for Speakers Audio.. if you plan on recording... just use an M-Audio USB device or any other recording devices)

Getting Full Q'E for ATI Saphire Radeon HD 4650 1Gb DDR2 PCI-e:
This also works for anybody with this same graphics card on any other motherboard with Snow 10.6.2

This is for VGA, I have not tested DVI (DVI alone, DVI to VGA or DVI to HDMI) or HDMI
Replace boot file with this one(Beta PCEFI 10.5): http://www.mediafire.com/?znznlozgnng

Spotlight search for: Terminal
I'd recommend go to Finder > Applications > Terminal (Drag it to your Dock)

sudo su
write-your-password
mv /boot /boot.bak
cp DRAG-NEW-BOOT-FILE-HERE /
exit

Go to Finder > Applications > Kext Utility (Drag it to your Dock)

Download these 2 kext files:
ATIRadeonX2000.kext: http://www.mediafire.com/?wzwmujymmvn
ATI4600Controller.kext: http://www.mediafire.com/?gtuyjlmhd5l

Drag them each alone to Kext Utility... enter password & wait... hopefully everything went well and you didn't get any kernel panics

Reboot you should be granted Full Q'E & all Resolutions with VGA.... *You should see Transparency in the Top Apple Menu Bar* change your Display Resolution in System Preferences


Just in case my Device ID for my Card is: ID: 9498 Vendor: 1002
If your Device ID is different(go to Apple icon > About This Mac > More Info.. > Graphics/Display), Manually Add your Device ID inside ATI4600Controller.kext before dragging them into Kext Utility
I don't think you need to add it inside ATIRadeonX2000.kext (I didn't add it on mines)

*NOTE* This is for DESKTOP VERSIONS ONLY - No Mobility versions work




FIXING ERRORS

If you have issues like Blank Screen or Garbled Screen (already testing booting up again changing VGA, DVI or HDMI)

Power off Computer > Restart

Boot as Single User mode:

-s
/sbin/mount -uw /
cd /System/Library/Extensions
mv ATI4600Controller.kext ATI4600Controller.kext.bak
mv ATIRadeonX2000.kext ATIRadeonX2000.kext.bak
reboot

And you should be back how it was before, booting back as normal in Snow... head into Netkas.org for another graphics solution.

2. ERROR ON BOOT / NO CHAMELEON / NO PC_EFI 10.5 / REALLY OLD DARWIN
THIS WILL ALSO REVERTS YOU BACK TO YOUR REGULAR BOOT LOADER
SOLUTION:


Boot with the DVD Installer "Snow Leopard Client-Server 10.6.2 SSE2/SSE3 Intel AMD"
Once finalized booted inside, click: Utilities > Terminal

cd /Volumes/YOUR-SNOW-LEOPARDS-HARD-DRIVES-NAME
mv boot.bak boot
reboot

3. If you can boot regularly into Snow and you simply want to have your Regular boot loader back:
SOLUTION:


Once inside Snow: Finder -> Search For: Terminal

sudo su
//write your password
mv /boot.bak /boot
exit

Then Repair Permissions with "Kext Utility" & Reboot
And you should be back as before adding anything of mines.

Sorry if it was way to long... Hopefully all this worked for you guys as it worked for me ;)
If I did any bad terminal commands please let me know I'll fix them.

(How To)Hazards 10.6.2 on MSI 770-C45 / Phenom ii 965 / ATI 4650

20 March 2010 - 07:38 PM

This is a "How To" installing Snow Leopard 10.6.2 on:

Motherboard: MSI 770-C45
CPU: AMD Phenom ii x4 965be C3
GFX: ATI Sapphire Radeon HD 4650 1Gb DDR2 PCI-e (method may work for any other Mobos as well)

Also you may need:
-2Gb or more of DDR3 Ram
-SATA DVD Optical Drive
-SATA Hard Drive (I do not recommend doing a partition, get an extra hard drive its better & less issues)
-USB Mouse / Keyboard or PS2 Keyboard / Mouse (I'd recommend USB Keyboard / Mouse)
-Snow Distro: Snow Leopard Client Server 10.6.2 SSE2/SSE3 Intel AMD by Hazard
*Google It*

Sorry this install isn't retail & not using any IDE devices.
I do not take any responsibility if it didn't work for you(damaged hardware, render anything, messed up your Snow or Leopard...etc)... you are on your own if you have issues... I will try to help.. but If I can't fix it... this is Insanelymac you could probably find your fix around.

Start of by downloading the Snow Distro by Hazard (its only about a regular DVD size) no DVD-DL needed & its a direct install of Snow Leopard 10.6.2. You do not have to patch the ISO, you can burn it directly for use on this Mobo.

Burning:
If you are in Windows, I would recommend burning it at your lowest speed with either ImgBurn or InfraRecorder... if you are on OSX (Leopard) just use DiskUtility or Toast and use the lowest burning speed.

Setting up Bios & Installing:
Insert DVD and boot up computer... Enter BIOS (Pressing DEL key on your keyboard)
-Head into Cell Menu:
AMD Cool n Quiet: Disabled
If you are overclocked *IMPORTANT* set everything to Stock settings

-Integrated Peripherals:
On-Chip ATA Devices -> Raid Mode -> Change IDE to AHCI

Save Bios settings: F10

Computer should be booted up again... use Boot Options: Pressing F11
Select your DVD Drive

Upon Chameleon boot up screen(you will see like an Aliens background)... Press F8
Use as boot arguments: -v busratio=20
(I have a quadcore cpu that is why I used Busratio=20 yours could be different boot arguments... maybe try: -v cpus=1 )
now just wait.....

When the language screen is loaded select your language..... once you see the installing screen *Do not run it yet*.... head over to the top: Utilities > Disk Utility

Formatting Hard Drive:
After you have gone to Utilities > Disk Utility

Select your Hard Drive(the one you plan on installing Snow Leopard)
Choose: Partition
1 Partition
Options > GUID
Format: Mac Os Journalized
Name your partition with a very simple name: snowhd

Afterwards close Disk Utility.. and finally we will begin Installation

Click Continue > Agree > Select Hard Drive > Customize

These are the Customize options needed:
AnV 10.2.0 / system kext
Chameleon RC3 PC EFI 10.5
AMD patch
ATI 43x0 45x0 46x0 - This is only if you have my same graphics card (I'll provide the solution for full Q'E)
ATIATA
Realtek R1000
EliotForceLegacyRTC
SATA/ATA
Legacy AHCI Sata
LegacyApplePIIXATA
IOATAFamily SATA Fix
IOATAFamily Fix
*PS2 apple - ONLY CHOOSE THIS IF YOU DON'T HAVE USB MOUSE / KEYBOARD
EvOreboot
Orange Icon
About My Mac Fix
SMBiosResolver
UUID
rosetta
X11

Choose Install, if the DVD Test starts... let it run until 10% you may skip it from there.
Install should take 15 - 25min or so.... if it all went well... Great! Restart

Upon restarting Boot Options again: Press F11
Choose your Hard Drive (where you installed Snow)

Press F8
Boot Arguments: -v busratio=20
You my encounter the Chameleon does not have a boot timeout... don't worry we will fix this later
If you have over 4Gb of Ram you must need to use as boot arguments: -v busratio=20 maxmem=4096

If you are lucky.... it will all go through.. and you will get a Grey Screen with your mouse(you will not see the Animated OSX Intro)...wait a bit... the language screen will appear.... do all your process of setting up all your info & when done you should appear on your Snow Leopard 10.6.2 Desktop.

No transparency, Q'E or Audio... but you may connect your Ethernet Lan... your internet connection already works ;)


*Lets add Boot Timeout & busratio=20 or busratio=20 maxmem=4096 to com.appleBoot.plist
Finder > select Hard Drive > Library > Preferences > SystemConfguration
Drag to your Desktop: com.appleBoot.plist

Right-Click in your Desktop "com.appleBoot.plist" get info > Open With > choose: Textedit.app > Apply Changes to all

Afterwards just double click: com.appleBoot.plist
Make changes similar to this
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string>busratio=20 maxmem=4096</string>
	<key>Timeout</key>
	<string>3</string>
	<key>Boot Loader Timeout</key>
	<string>3</string>
</dict>
</plist>

Now simply, again Finder > Hard Drive > Library > Prefrences > SystemConfiguration
Right-Click: com.appleBoot.plist > move to Trash
Now Drag com.appleBoot.plist from Desktop to the Windows: Finder > Hard Drive > Library > Prefrences > SystemConfiguration

*Optional*
Drag it as well inside: Finder > Hard Drive > Extra



Getting AUDIO(ALC888S / ALC885):
Download this package: http://www.mediafire.com/?1u2wnfmmdnj
After downloading, install it: AzaliaAudio.pkg
Reboot, upon your Desktop you should already have Audio (Sorry MIC does not work, this is only for Speakers Audio.. if you plan on recording... just use an M-Audio USB device)

Getting Full Q'E for ATI Saphire Radeon HD 4650 1Gb DDR2 PCI-e:
This also works for anybody with this same graphics card on any other motherboard with Snow 10.6.2

This is for VGA, I have not tested DVI (DVI alone, DVI to VGA or DVI to HDMI) or HDMI
Replace boot file with this one(Beta PCEFI 10.5): http://www.mediafire.com/?znznlozgnng

Spotlight search for: Terminal
I'd recommend go to Finder > Applications > Terminal (Drag it to your Dock)

sudo su
write-your-password
mv /boot /boot.bak
cp DRAG-NEW-BOOT-FILE-HERE /
exit

Go to Finder > Applications > Kext Utility (Drag it to your Dock)

Download these 2 kext files:
ATIRadeonX2000.kext: http://www.mediafire.com/?wzwmujymmvn
ATI4600Controller.kext: http://www.mediafire.com/?gtuyjlmhd5l

Drag them each alone to Kext Utility... enter password & wait... hopefully everything went well and you didn't get any kernel panics

Reboot you should be granted Full Q'E & all Resolutions with VGA.... *You should see Transparency in the Top Apple Menu Bar* change your Display Resolution in System Preferences


Just in case my Device ID for my Card is: ID: 9498 Vendor: 1002
If your Device ID is different(go to Apple icon > About This Mac > More Info.. > Graphics/Display), Manually Add your Device ID inside ATI4600Controller.kext before dragging them into Kext Utility
I don't think you need to add it inside ATIRadeonX2000.kext (I didn't add it on mines)

*NOTE* This is for DESKTOP VERSIONS ONLY - No Mobility versions work




FIXING ERRORS

If you have issues like Blank Screen or Garbled Screen (already testing booting up again changing VGA, DVI or HDMI)

Power off Computer > Restart

Boot as Single User mode:

-s
/sbin/mount -uw /
cd /System/Library/Extensions
mv ATI4600Controller.kext ATI4600Controller.kext.bak
mv ATIRadeonX2000.kext ATIRadeonX2000.kext.bak
reboot

And you should be back how it was before, booting back as normal in Snow... head into Netkas.org for another graphics solution.

2. ERROR ON BOOT / NO CHAMELEON / NO PC_EFI 10.5 / REALLY OLD DARWIN
THIS WILL ALSO REVERTS YOU BACK TO YOUR REGULAR BOOT LOADER
SOLUTION:


Boot with the DVD Installer "Snow Leopard Client-Server 10.6.2 SSE2/SSE3 Intel AMD"
Once finalized booted inside, click: Utilities > Terminal

cd /Volumes/YOUR-SNOW-LEOPARDS-HARD-DRIVES-NAME
mv boot.bak boot
reboot

3. If you can boot regularly into Snow and you simply want to have your Regular boot loader back:
SOLUTION:


Once inside Snow: Finder -> Search For: Terminal

sudo su
//write your password
mv /boot.bak /boot
exit

Then Repair Permissions with "Kext Utility" & Reboot
And you should be back as before adding anything of mines.

Hopefully all this worked for you guys as it worked for me ;)
If I did any bad terminal commands please let me know I'll fix them.

Help! getting to work my AKE BC168 PCMCIA on Snow 10.6.2

11 March 2010 - 11:25 PM

Would there be any help for Snow on this?
PCMCIA AKE BC168
Posted Image

AKE Inside hide PCMCIA to Two USB 2.0 Ports

* Supports High Speed 480Mbps.
* Full Speed 12Mbps and low speed 1.5Mbps Data Transfer
* It can connect all kind of USB2.0/USB1.1/USB1.0 devices, removal hard disk. CF/SM/MMC/Memory Sticker, Scanner, Printer, Digital Camera, Camcorder, CD-R/RW, DVD-RW etc.
* Supports "plug and play" function. * It can be used for the laptop with 32-bit Cardbus and PCMCIA interface.
* Fully compliant with FCC and CE standards.

Features:

* Add 2 USB 2.0 ports to your windows-based notebook.
* Truly Plug and Play.
* You can Share with other Devices and Old Notebooks
* Supported Windows 98SE/ME/2000/XP/VISTA

I am certain 100% it works on an actual G3 PowerBook "Pismo" running OS 10.4 "Tiger", I haven't read anywhere if anybody with a newer mac has tested it.. but if it worked on that powerbook... it could probably work now
I contacted that very person who has it working to provide me print screens of his About this Mac.. more info... to see if you guys could try to help with it(he wasn't sure which one was it but he send allot screenies):
http://img411.images...picture8qi.jpg/
http://img684.images.../picture7y.jpg/
http://img641.images...picture6zt.jpg/
http://img62.imagesh...picture5mz.jpg/
http://img175.images.../picture4i.jpg/
http://img101.images.../picture3d.jpg/
http://img696.images...picture2ld.jpg/
http://img534.images...picture1zu.jpg/

Anyways I have yet not tried any kexts for PCI... trying to do this on my Acer 3680, which all usb ports died... the only way i have usb through Linux & Windows 7 is using a PCMCIA AKE BC168 <- it has 2 USB ports

That I know of past testings with Leopard 10.5.7 (I did not choose any PCI kexts) it already gives me Kernel Panics instantly from booting with it connected... I have to disconnect it for me to able to boot and use Leopard.. if I try connecting it... it freezes & creates a kernel panic as well... so simply I could not use it under Leopard 10.5.7

Now recently on Snow in which I'm currently on 10.6.2 I can actually have it connected but it isn't recognized at all.... So I think its best I get to try to have it working under Snow since I am not getting any kernel panics with it connected.

So I went into Linux through Ubuntu 9.10 Live CD, and got this through Terminal with: lspci
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
0a:03.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0b:00.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
0b:00.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
0b:00.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)

I actually have no clue which one is it exactly... I'm guessing it is the last ones with VIA Technologies... not really sure yet, but any help would be greatly appreciated.

*UPDATE*
If its the VIA Controller I found 2 Devices & Vendor ID for Them through Windows... not sure which is which, since they have different names:
VIA USB Enhanced Host Controller - Device ID:3104 Vendor ID: - 1106
VIA Rev 5 (there were 2 of these with same name, device & vendor ids) - Device ID: 2028 - Vendor ID: 1106
© 2015 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy